New strategies for the differentiation of fresh and frozen/thawed fish: A rapid and accurate non-targeted method by ambient mass spectrometry and data fusion (part A)

Ambient mass spectrometry imaging of food natural products by angled direct analysis in real time high-resolution mass spectrometry

Direct surface analysis in ambient conditions provides information on the position and chemical composition of an object at the time of investigation. An angled sampling probe is developed in this work for direct analysis in real time (DART) ionization high-resolution mass spectrometry. The DART ion source and the interface were modified for improved surface resolution, increased ion transfer efficiency, as well as enabling two-dimensional surface scanning. The angled probe DART-MS system was used for investigating a variety of food samples including fruit peels, ginseng root, plant leaves and sections of radish. Abundant signals and distinct chemical profiles are obtained in seconds, and spatial distribution of different molecules across the sample surfaces can be observed. In addition, the developed system can quickly identify the chemical changes when the surfaces were treated. The method is capable of directly evaluating food sample surfaces with different shapes, hardness, and conditions, without any sample pretreatments.

Recent advances in the application of direct analysis in real time-mass spectrometry (DART-MS) in food analysis

Direct analysis in real time-mass spectrometry (DART-MS) has evolved as an effective analytical technique for the rapid and accurate analysis of food samples. The current advancements of DART-MS in food analysis are described in this paper. We discussed the DART principles, which include devices, ionization mechanisms, and parameter settings. Numerous applications of DART-MS in the fields of food and food products analysis published during 2018-2023 were reviewed, including contamination detection, food authentication and traceability, and specific analyte analysis in the food matrix. Furthermore, the challenges and limitations of DART-MS, such as matrix effect, isobaric component analysis, cost considerations and accessibility, and compound selectivity and identification, were discussed as well.

A Snapshot, Using a Multi-Omic Approach, of the Metabolic Cross-Talk and the Dynamics of the Resident Microbiota in Ripening Cheese Inoculated with Listeria innocua

Raw milk cheeses harbor complex microbial communities. Some of these microorganisms are technologically essential, but undesirable microorganisms can also be present. While most of the microbial dynamics and cross-talking studies involving interaction between food-derived bacteria have been carried out on agar plates in laboratory-controlled conditions, the present study evaluated the modulation of the resident microbiota and the changes of metabolite production directly in ripening raw milk cheese inoculated with Listeria innocua strains. Using a proxy of the pathogenic Listeria monocytogenes, we aimed to establish the key microbiota players and chemical signals that characterize Latteria raw milk cheese over 60 days of ripening time. The microbiota of both the control and Listeria-inoculated cheeses was analyzed using 16S rRNA targeted amplicon sequencing, while direct analysis in real time mass spectrometry (DART-HRMS) was applied to investigate the differences in the metabolic profiles of the cheeses. The diversity analysis showed the same microbial diversity trend in both the control cheese and the inoculated cheese, while the taxonomic analysis highlighted the most representative genera of bacteria in both the control and inoculated cheese: Lactobacillus and Streptococcus. On the other hand, the metabolic fingerprints revealed that the complex interactions between resident microbiota and L. innocua were governed by continuously changing chemical signals. Changes in the amounts of small organic acids, hydroxyl fatty acids, and antimicrobial compounds, including pyroglutamic acid, hydroxy-isocaproic acid, malic acid, phenyllactic acid, and lactic acid, were observed over time in the L. innocua-inoculated cheese. In cheese that was inoculated with L. innocua, Streptococcus was significantly correlated with the volatile compounds carboxylbenzaldheyde and cyclohexanecarboxylic acid, while Lactobacillus was positively correlated with some volatile and flavor compounds (cyclohexanecarboxylic acid, pyroxidal acid, aminobenzoic acid, and vanillic acid). Therefore, we determined the metabolic markers that characterize a raw milk cheese inoculated with L. innocua, the changes in these markers with the ripening time, and the positive correlation of flavor and volatile compounds with the resident microbiota. This multi-omics approach could suggest innovative food safety strategies based on the enhanced management of undesirable microorganisms by means of strain selection in raw matrices and the addition of specific antimicrobial metabolites to prevent the growth of undesirable microorganisms.

Empowering veterinary clinical diagnosis in industrial poultry production by ambient mass spectrometry and chemiometrics: a new approach for precise poultry farming

Untargeted metabolomic profiling, by ambient mass spectrometry and chemometric tools, has made a dramatic impact on human disease detection. In a similar vein, this study attempted the translation of this clinical human disease experience to farmed poultry for precise veterinary diagnosis. As a proof of principle, in this diagnostic/prognostic study, direct analysis in real-time high resolution mass spectrometry (DART-HRMS) was used in an untargeted manner to analyze fresh tissues (abdominal fat, leg skin, liver, and leg muscle) of pigmented and non-pigmented broilers to investigate the causes of lack of pigmentation in an industrial poultry farm. Afterwards, statistical analysis was applied to the DART-HRMS data to retrieve the molecular features that codified for 2 broiler groups, that is, properly pigmented and non-pigmented broilers. Higher abundance of oxidized lipids, high abundance of oxidized bile derivatives, and lower levels of tocopherol isomers (Vitamin E) and retinol (Vitamin A) were captured in nonpigmented than in pigmented broilers. In addition, conventional rapid analyses were used: 1) color parameters of the tissues of pigmented and non-pigmented broilers were measured to rationalize the color differences in abdominal fat, leg skin and leg muscle, and 2) macronutrients were determined in broiler leg muscle, to capture a detailed picture of the pathology and exclude other possible causes. In this study, the DART-HRMS system performed well in retrieving valuable chemical information from broilers that explained the differences between the 2 groups of broilers in absorption of xanthophylls and the subsequent lack of proper broiler pigmentation in affected broilers. The results suggest this technology could be useful in providing near real-time feedback to aid in veterinary decision-making in poultry farming.

Intrinsic properties of chitosan on the characteristics of gold nanoparticles and its application as smart packaging device

Storage temperature fluctuation is a major problem faced in food and pharmaceutical industry, apart from prevailing fraud in marketing frozen products as fresh. The present work aimed to study the effect of intrinsic properties of chitosan on synthesis and performance of gold nanoparticles as smart packaging devices. Different types of Chitosan from shrimp waste were used as reducing and capping agent in the synthesis of metal nanoparticle. Time is taken to reduce gold atom to gold nanoparticles varied with the type of reducing agent, between 6 min 40 s to 15 min 02 s. The maximum absorbance (λmax) for AuNPs was observed between 517 and 530 nm. An increase in the concentration of chitosan resulted in smaller and uniform size AuNPs with size ranging from 8.09 to 9.95 nm compared with 14.44 to 19.88 nm for lower concentration of chitosan. Visible ruby red colour of AuNPs synthesised using trisodium citrate (TSC) and lower concentration of chitosan (0.1%) changed to colourless and grey to blue, respectively upon exposure to frozen condition (-18 °C ± 1 °C). UV Visible spectra indicated distinctly different (broader) spectrum with reduced peak intensity. A visible change in colour from ruby red to bluish and colourless state indicates that irrespective of the properties of available chitosan, it can be used for synthesis of gold nanoparticles as smart packaging to distinguish packed fresh/chilled/refrigerated products from frozen ones.

Multi-Omics Approaches for Freshness Estimation and Detection of Illicit Conservation Treatments in Sea Bass (Dicentrarchus Labrax): Data Fusion Applications

Fish freshness consists of complex endogenous and exogenous processes; therefore, the use of a few parameters to unravel illicit practices could be insufficient. Moreover, the development of strategies for the identification of such practices based on additives known to prevent and/or delay fish spoilage is still limited. The paper deals with the identification of the effect played by a Cafodos solution on the conservation state of sea bass at both short-term (3 h) and long-term (24 h). Controls and treated samples were characterized by a multi-omic approach involving proteomics, lipidomics, metabolomics, and metagenomics. Different parts of the fish samples were studied (muscle, skin, eye, and gills) and sampled through a non-invasive procedure based on EVA strips functionalized by ionic exchange resins. Data fusion methods were then applied to build models able to discriminate between controls and treated samples and identify the possible markers of the applied treatment. The approach was effective in the identification of the effect played by Cafodos that proved to be different in the short- and long-term and complex, involving proteins, lipids, and small molecules to a different extent.

Metabolic signature of Mycobacterium avium subsp. paratuberculosis infected and infectious dairy cattle by integrating nuclear magnetic resonance analysis and blood indices

The early diagnosis of Mycobacterium avium subsp. paratuberculosis (MAP) is one of the current challenges of farmers and veterinarians. This work aimed to investigate the changes in metabolic levels associated with natural MAP infection in infected and infectious dairy cattle. The study included sera from 23 infectious/seropositive, 10 infected but non-infectious/seronegative, and 26 negative Holstein Fresian cattle. The samples were selected from a collection of samples gathered during a prospective study. The samples were analyzed by quantitative nuclear magnetic resonance (NMR) spectroscopy and routine blood chemistry. The blood indices and the ¹H NMR data were concatenated by low-level data fusion, resulting in a unique global fingerprint. Afterwards, the merged dataset was statistically analyzed by the least absolute shrinkage and selection operator (LASSO), which is a shrinkage and selection method for supervised learning. Finally, pathways analysis was performed to get more insights on the possible dysregulated metabolic pathways. The LASSO model achieved, in a 10 time repeated 5-fold cross-validation, an overall accuracy of 91.5% with high values of sensitivity and specificity in classifying correctly the negative, infected, and infectious animals. The pathway analysis revealed MAP-infected cattle have increased tyrosine metabolism and enhanced phenylalanine, tyrosine and tryptophan biosynthesis. The enhanced synthesis and degradation of ketone bodies was observed both in infected and infectious cattle. In conclusion, fusing data from multiple sources has proved to be useful in exploring the altered metabolic pathways in MAP infection and potentially diagnosing negative animals within paratuberculosis-infected herds.

Food metabolomics: Latest hardware-developments for nontargeted food authenticity and food safety testing

The analytical requirements for food testing have increased significantly in recent years. On the one hand, because food fraud is becoming an ever-greater challenge worldwide, and on the other hand because food safety is often difficult to monitor due to the far-reaching trade chains. In addition, the expectations of consumers on the quality of food have increased, and they are demanding extensive information. Cutting-edge analytical methods are required to meet these demands. In this context, non-targeted metabolomics strategies using mass and nuclear magnetic resonance spectrometers (mass spectrometry [MS]) have proven to be very suitable. MS-based approaches are of particular importance as they provide a comparatively high analytical coverage of the metabolome. Accordingly, the efficiency to address even challenging issues is high. A variety of hardware developments, which are explained in this review, have contributed to these advances. In addition, the potential of future developments is highlighted, some of which are currently not yet commercially available or only used to a comparatively small extent but are expected to gain in importance in the coming years.

The use of various statistical methods for authenticity and detection of adulteration in fish and seafood

Various methodologies including genetic analyses, morphometrics, proteomics, lipidomics, metabolomics, etc. are now used or being developed to authenticate fish and seafood. Such techniques usually lead to the generation of enormous amounts of data. The analysis and interpretation of this information can be particularly challenging. Statistical techniques are therefore commonly used to assist in analyzing these data, visualizing trends and differences and extracting conclusions. This review article aims at presenting and discussing statistical methods used in studies on fish and seafood authenticity and adulteration, allowing researchers to consider their options based on previous successes/failures but also offering some recommendations about the future of such techniques. Techniques such as PCA, AMOVA and FST statistics, that allow the differentiation of genetic groups, or techniques such as MANOVA that allow large data sets of morphometric characteristics or elemental differences to be analyzed are discussed. Furthermore, methods such as cluster analysis, DFA, CVA, CDA and heatmaps/Circos plots that allow samples to be differentiated based on their geographical origin are also reviewed and their advantages and disadvantages as found in past studies are given. Finally, mathematical simulations and modeling are presented in a detailed review of studies using them, together with their advantages and limitations.

Rapid, novel screening of toxicants in poison baits, and autopsy specimens by ambient mass spectrometry

Animal poisoning and dissemination of baits in the environment have public health and ethological implications, which can be followed by criminal sanctions for those responsible. The reference methods for the analysis of suspect baits and autopsy specimens are founded on chromatographic-based techniques. They are extremely robust and sensitive, but also very expensive and laborious. For this reason, we developed an ambient mass spectrometry (AMS) method able to screen for 40 toxicants including carbamates, organophosphate and chlorinated pesticides, coumarins, metaldehyde, and strychnine. Spiked samples were firstly purified and extracted by dispersive solid phase extraction (QuEChERS) and then analyzed by direct analysis in real time high-resolution mass spectrometry (DART-HRMS). To verify the performance of this new approach, 115 authentic baits (n = 59) and necropsy specimens (gastrointestinal content and liver, n = 56) were assessed by the official reference methods and combined QuEChERS-DART-HRMS. The agreement between the results allowed evaluation of the performances of the new screening method for a variety of analytes and calculation of the resultant statistical indicators (the new method had overall accuracy 89.57%, sensitivity of 88.24%, and a specificity of 91.49%). Taking into account only the baits, 96.61% of overall accuracy was achieved with 57/59 samples correctly identified (statistical sensitivity 97.50%, statistical specificity 94.74%). Successful identification of the bitter compound, denatonium benzoate, in all the samples that contained rodenticides (28/28) was also achieved. We believe initial screening of suspect poison baits could guide the choice of reference confirmatory methods, reduce the load in official laboratories, and help the early stages of investigations into cases of animal poisoning.

Food traceability 4.0 as part of the fourth industrial revolution: key enabling technologies

Food Traceability 4.0 (FT 4.0) is about tracing foods in the era of the fourth industrial revolution (Industry 4.0) with techniques and technologies reflecting this new revolution. Interest in food traceability has gained momentum in response to, among others events, the outbreak of the COVID-19 pandemic, reinforcing the need for digital food traceability that prevents food fraud and provides reliable information about food. This review will briefly summarize the most common conventional methods available to determine food authenticity before highlighting examples of emerging techniques that can be used to combat food fraud and improve food traceability. A particular focus will be on the concept of FT 4.0 and the significant role of digital solutions and other relevant Industry 4.0 innovations in enhancing food traceability. Based on this review, a possible new research topic, namely FT 4.0, is encouraged to take advantage of the rapid digitalization and technological advances occurring in the era of Industry 4.0. The main FT 4.0 enablers are blockchain, the Internet of things, artificial intelligence, and big data. Digital technologies in the age of Industry 4.0 have significant potential to improve the way food is traced, decrease food waste and reduce vulnerability to fraud opening new opportunities to achieve smarter food traceability. Although most of these emerging technologies are still under development, it is anticipated that future research will overcome current limitations making large-scale applications possible.

Authentication of Edible Insects’ Powders by the Combination of DART-HRMS Signatures: The First Application of Ambient Mass Spectrometry to Screening of Novel Food

This feasibility study reports the use of direct analysis in real-time high-resolution mass spectrometry (DART-HRMS) in profiling the powders from edible insects, as well as the potential for the identification of different insect species by classification modeling. The basis of this study is the revolution that has occurred in the field of analytical chemistry, with the improved capability of ambient mass spectrometry to authenticate food matrices. In this study, we applied DART-HRMS, coupled with mid-level data fusion and a learning method, to discriminate between Acheta domesticus (house cricket), Tenebrio molitor (yellow mealworm), Locusta migratoria (migratory locust), and Bombyx mori (silk moth). A distinct metabolic fingerprint was observed for each edible insect species, while the Bombyx mori fingerprint was characterized by highly abundant linolenic acid and quinic acid; palmitic and oleic acids are the statistically predominant fatty acids in black soldier fly (Hermetia illucens). Our chemometrics also revealed that the amino acid proline is a discriminant molecule in Tenebrio molitor, whereas palmitic and linoleic acids are the most informative molecular features of the house cricket (Acheta domesticus). Good separation between the four different insect species was achieved, and cross-validation gave 100% correct identification for all training samples. The performance of the random forest classifier was examined on a test set and produced excellent results, in terms of overall accuracy, sensitivity, and specificity. These results demonstrate the reliability of the DART-HRMS as a screening method in a future quality control scenario to detect complete substitution of insect powders.

A feasibility study on nondestructive classification of frozen Atlantic salmon (Salmo salar) fillets based on temperature history at the logistics using NIR spectroscopy

Temperature fluctuation commonly occurs in the cold chain leading to complete or partial thawing and refreezing of frozen products resulting in a multifrozen product. Such oscillation of temperature could cause significant quality reduction compared to single frozen products. This study was designed to differentiate frozen Atlantic salmon fillets based on the level of temperature fluctuation. Near-infrared spectroscopy (NIRS) coupled with chemometrics was used to classify the frozen fillets stored at no fluctuation (NF), low fluctuation (LF), high fluctuation (HF), and very high fluctuation (VF) temperature. Using spectral profiles obtained at both frozen and thawed states, fillets were classified based on the level of temperature fluctuation by partial least squares discriminant analysis (PLS-DA). The thawed samples showed better classification accuracy (71%) than frozen samples (66%) in a four-class model. Considering the small variation within the first two (NF, LF) and the last two (HF, VF) groups, a two-class classification model was developed using thawed samples, and the obtained model correctly classified the two groups ([NF, LF] and [HF, VF]) with 100 % classification accuracy. Protein- and water-related changes were found important to distinguish the fillets. Based on these findings, the four-class prediction model is found insufficient to be used for nondestructive determination of temperature history of frozen fillets. However, the two-class prediction model with further external validation can be applied to determine the level of temperature fluctuation particularly using fillets scanned at thawed state. PRACTICAL APPLICATION: NIR spectroscopy can be used to evaluate the degree of temperature fluctuation and thus related quality loss throughout the logistics of frozen Atlantic salmon fillets. Researchers, food control authorities, and the retail industry could be the primary beneficiaries of this research output.

Seafood Processing, Preservation, and Analytical Techniques in the Age of Industry 4.0

Fish and other seafood products are essential dietary components that are highly appreciated and consumed worldwide. However, the high perishability of these products has driven the development of a wide range of processing, preservation, and analytical techniques. This development has been accelerated in recent years with the advent of the fourth industrial revolution (Industry 4.0) technologies, digitally transforming almost every industry, including the food and seafood industry. The purpose of this review paper is to provide an updated overview of recent thermal and nonthermal processing and preservation technologies, as well as advanced analytical techniques used in the seafood industry. A special focus will be given to the role of different Industry 4.0 technologies to achieve smart seafood manufacturing, with high automation and digitalization. The literature discussed in this work showed that emerging technologies (e.g., ohmic heating, pulsed electric field, high pressure processing, nanotechnology, advanced mass spectrometry and spectroscopic techniques, and hyperspectral imaging sensors) are key elements in industrial revolutions not only in the seafood industry but also in all food industry sectors. More research is still needed to explore how to harness the Industry 4.0 innovations in order to achieve a green transition toward more profitable and sustainable food production systems.