Instantaneous characterization of crude vegetable oils via triacylglycerols fingerprint by atmospheric solids analysis probe tandem mass spectrometry with multiple neutral loss scans

Rapid and accurate detection of cinnamon oil adulteration in perilla leaf oil using atmospheric solids analysis probe-mass spectrometry

Perilla leaf oil (PLO) is a global premium vegetable oil with abundant nutrients and substantial economic value, rendering it susceptible to potential adulteration by unscrupulous entrepreneurs. The addition of cinnamon oil (CO) is one of the main adulteration avenues for illegal PLOs. In this study, new and real-time ambient mass spectrometric methods were developed to detect CO adulteration in PLO. First, atmospheric solids analysis probe tandem mass spectrometry combined with principal component analysis and principal component analysis-linear discriminant analysis was employed to differentiate between authentic and adulterated PLO. Then, a spectral library was established for the instantaneous matching of cinnamaldehyde in the samples. Finally, the results were verified using the SRM mode of ASAP-MS/MS. Within 3 min, the three methods successfully identified CO adulteration in PLO at concentrations as low as 5% v/v with 100% accuracy. The proposed strategy was successfully applied to the fraud detection of CO in PLO.

Quantitative Analysis of Blended Oils Based on Intensity Ratios of Marker Ions in MALDI-MS Spectra

Determination of quantitative compositions of blended oils is an essential but challenging step for the quality control and safety assurance of blended oils. We herein report a method for the quantitative analysis of blended oils based on the intensity ratio of triacylglycerol marker ions, which could be obtained from the highly reproducible spectra acquired by using matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) to directly analyze blended oils in their oily states. We demonstrated that this method could provide good quantitative results to binary, ternary, and quaternary blended oils, with simultaneous quantitation of multiple compositions, and was applicable for quantitative analysis of commercial blended oil products. Moreover, the intensity ratio-based method could be used to rapidly measure the proportions of oil compositions in blended oils, only based on the spectra of the blended oils and related pure oils, making the method as a high-throughput approach to meet the sharply growing analytical demands of blended oils.

Mass spectrometry of polymers: A tutorial review

Ever since the inception of synthetic polymeric materials in the late 19th century, the number of studies on polymers as well as the complexity of their structures have only increased. The development and commercialization of new polymers with properties fine-tuned for specific technological, environmental, consumer, or biomedical applications requires powerful analytical techniques that permit the in-depth characterization of these materials. One such method with the ability to provide chemical composition and structure information with high sensitivity, selectivity, specificity, and speed is mass spectrometry (MS). This tutorial review presents and exemplifies the various MS techniques available for the elucidation of specific structural features in a synthetic polymer, including compositional complexity, primary structure, architecture, topology, and surface properties. Key to every MS analysis is sample conversion to gas-phase ions. This review describes the fundamentals of the most suitable ionization methods for synthetic materials and provides relevant sample preparation protocols. Most importantly, structural characterizations via one-step as well as hyphenated or multidimensional approaches are introduced and demonstrated with specific applications, including surface sensitive and imaging techniques. The aim of this tutorial review is to illustrate the capabilities of MS for the characterization of large, complex polymers and emphasize its potential as a powerful compositional and structural elucidation tool in polymer chemistry.

Shotgun-Based Mass Spectrometry Analysis of Phospholipid and Triacylglycerol Molecular Species and Eicosanoids in Salmon Muscle Tissue on Feeding Microbial Oil

The continuous growth of aquaculture places a growing demand on alternative sources of fish oil (FO). Certain microorganisms provide a sustainable replacement for FO due to their content of EPA and DHA, which are essential for fish health. Appreciable evidence shows that changes in feeding sources may alter the nutritional components of salmon; however, the influence of diets on lipid species remains unclear. In this study, the identification and semi-quantification of lipid molecular species in salmon muscle during feeding with a microbial oil (MO) were carried out by focusing on triacylglycerol (TAG) and diacyl-phospholipid using shotgun-based mass spectrometry analysis. DHA in the MO diet was efficiently incorporated into phospholipid structures on feeding, followed by accumulation in salmon muscle. The MO diet elevated the level of certain EPA-containing TAGs, such as TAG C52:5 (16:0_16:0_20:5) and TAG C54:6 (16:0_18:1_20:5), indicating that the MO diet may be an excellent source for enhancement of the abundance of ω3 lipids. Further, prostaglandins (PGs) PGE2 and PGF3α were identified and quantified for the first time in salmonid tissue.

Changes in the quality of flaxseed oil powder produced by incorporating with microcrystalline cellulose and thyme

Flaxseed oil is a high nutrition oil, rich in ω-3 fatty acid, tocopherols and phenolic compounds. However, it is prone to oxidation due to its high unsaturation which needs pretreatments to be easily introduce to the market. In this study, flaxseed oil was converted to powder form by mixing with microcrystalline cellulose (MC) and thyme powder to produce flaxseed oil powder. For this purpose, 3 different levels of thyme powder (5%, 10% and 15% of oil) were mixed with oil, followed by mixing with different proportions of MC (50:50, 50:75, 50:100 (oil:MC)) and stored for 90 days at 25 °C and 4 °C. Results indicated that the total phenolic compounds (23.2-91.2 mg GAE/100 g), chlorophyll (9-63.6 mg/kg), and carotenoid (4.4-9.9 mg/kg) contents increased with the incorporation of thyme powder into the flaxseed oil on the first day in 25 °C and 4 °C. Also during 90 days storage, phenolic compound (21.8%), chlorophyll (32.5%) and carotenoid (24%) decreased in both 25 °C and 4 °C temperatures. The results confirmed that adding thyme powder to samples decreased acidity and peroxide value in compare with control. Using thyme as a natural antioxidant and also transforming the oil to powder form by MC increased the oxidative stability in compare with control. The produced high stable flaxseed oil powder has the potential to be used directly on food products like salads or to be used in different food formulations to fortify them with natural antioxidants and ω-3 essential fatty acids.

Membrane Emulsification as an Emerging Method for Lacticaseibacillus rhamnosus GG® Encapsulation

Techniques capable of producing small-sized probiotic microcapsules with high encapsulation yields are of industrial and scientific interest. In this study, an innovative membrane emulsification system was investigated in the production of microcapsules containing Lacticaseibacillus rhamnosus GG® (Lr), sodium alginate (ALG), and whey protein (WPI), rice protein (RPC), or pea protein (PPC) as encapsulating agents. The microcapsules were characterized by particle size distribution, optical microscopy, encapsulation yield, morphology, water activity, hygroscopicity, thermal properties, Fourier-transform infrared spectroscopy (FTIR), and probiotic survival during in vitro simulation of gastrointestinal conditions. The innovative encapsulation technique resulted in microcapsules with diameters varying between 18 and 29 μm, and encapsulation yields > 93%. Combining alginate and whey, rice, or pea protein improved encapsulation efficiency and thermal properties. The encapsulation provided resistance to gastrointestinal fluids, resulting in high probiotic viability at the end of the intestinal phase (> 7.18 log CFU g-1). The proposed encapsulation technology represents an attractive alternative to developing probiotic microcapsules for future food applications.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s11947-023-03099-w.

Impact of Ambient Vapors on Spectra of 4-Nitroaniline Recorded under Atmospheric Solids Analysis Probe (ASAP) Mass Spectrometric Conditions

Thermally desorbed 4-nitroaniline (4-NA), upon atmospheric pressure chemical ionization (APCI), generates gaseous ions for its protonated species. The APCI mass spectrum recorded under mild in-source ion-activating conditions from 4-NA showed a peak at m/z 139, whereas that acquired under high ion-activating conditions showed two additional peaks at m/z 122 (^•OH loss) and 92 (^•NO loss). The spectrum changed instantaneously when acetonitrile vapor was introduced to the source. In the new spectrum, both m/z 122 and 92 peaks were absent, while a new peak appeared at m/z 93. Ion-mobility separation carried out with the m/z 139 ion revealed that the initial ion represented the thermodynamically favored nitro-protonated tautomer. The ion population changed to an ensemble dominated by the less-favored amino-protomer when acetonitrile vapor was introduced to the ion source. The amino-protomer, upon collisional activation, loses ^•NO₂ to generate an m/z 93 ion, which was confirmed to be the 4-dehydroanilinium ion. Ion mobility provided a practical way to monitor the changes secured by acetonitrile vapor because the two protomers showed different arrival times. Under spray-ionization conditions, the formation of the thermodynamically less favored protomer has been attributed to kinetic trapping. Our study demonstrated that the less favored amino-protomer could be generated by introducing acetonitrile vapor under nonspray conditions. Apparently, under APCI conditions, protonated water vapor attaches to the nitro group to generate a proton-bound heterodimer, which upon activation dissociates to yield the nitro-protomer. In contrast, protonated acetonitrile makes a tighter complex preferentially with the amino group, which upon activation breaks to the amino-protomer.

Microwave-assisted extraction of cellulose nanocrystals from almond (Prunus amygdalus) shell waste

Almond (Prunus amygdalus) is one of the most common tree nuts on a worldwide basis. This nut is highly regarded in the food and cosmetic industries. However, for all these applications, almonds are used without their shell protection, which is industrially removed contributing approximately 35-75% of the total fruit weight. This residue is normally incinerated or dumped, causing several environmental problems. In this study, a novel cellulose nanocrystal (CNCs) extraction procedure from almond shell (AS) waste by using microwave-assisted extraction was developed and compared with the conventional approach. A three-factor, three-level Box-Behnken design with five central points was used to evaluate the influence of extraction temperature, irradiation time, and NaOH concentration during the alkalization stage in crystallinity index (CI) values. A similar CI value (55.9 ± 0.7%) was obtained for the MAE process, comprising only three stages, compared with the conventional optimized procedure (55.5 ± 1.0%) with five stages. As a result, a greener and more environmentally friendly CNC extraction protocol was developed with a reduction in time, solvent, and energy consumption. Fourier transform infrared (FTIR) spectra, X-ray diffractogram (XRD), atomic force microscopy (AFM), and scanning electron microscopy (SEM) images, and thermal stability studies of samples confirmed the removal of non-cellulosic components after the chemical treatments. TEM images revealed a spherical shape of CNCs with an average size of 21 ± 6 nm, showing great potential to be used in food packaging, biological, medical, and photoelectric materials. This study successfully applied MAE for the extraction of spherical-shaped CNCs from AS with several advantages compared with the conventional procedure, reducing costs for industry.

First report on quality and purity assessment of sweet almond oil in Brazilian body oils by gas chromatography and mass spectrometry

Sweet almond oil is a raw material with high-added value used in different products. Then, the aim of this study is to evaluate the quality and purity of 10 body oils based on sweet almond oils currently available in the Brazilian market. Fatty acid composition and triacylglycerol (TAG) profile were determined by gas chromatography with flame ionization detector (GC-FID) and atmospheric solids analysis probe mass spectrometry (ASAP-MS), respectively. The authenticity of samples was assessed using an analytical curve equation. Soybean oil was chosen as the adulterant because it is the cheapest vegetable oil commercialized in Brazil. Hierarchical clustering analysis (HCA) in conjunction with ASAP-MS classified product samples according to the type of vegetable oil (soybean and sweet almond oils). The addition of soybean oil (8.79% to 99.70%) was confirmed in samples. However, only two samples stated in their label the presence of soybean oil as an ingredient. These findings highlight the need for better oversight by regulatory bodies to ensure that consumers acquire high quality and authentic products based on equally high quality and purity of sweet almond oils.

Food metabolomics: Latest hardware-developments for nontargeted food authenticity and food safety testing

The analytical requirements for food testing have increased significantly in recent years. On the one hand, because food fraud is becoming an ever-greater challenge worldwide, and on the other hand because food safety is often difficult to monitor due to the far-reaching trade chains. In addition, the expectations of consumers on the quality of food have increased, and they are demanding extensive information. Cutting-edge analytical methods are required to meet these demands. In this context, non-targeted metabolomics strategies using mass and nuclear magnetic resonance spectrometers (mass spectrometry [MS]) have proven to be very suitable. MS-based approaches are of particular importance as they provide a comparatively high analytical coverage of the metabolome. Accordingly, the efficiency to address even challenging issues is high. A variety of hardware developments, which are explained in this review, have contributed to these advances. In addition, the potential of future developments is highlighted, some of which are currently not yet commercially available or only used to a comparatively small extent but are expected to gain in importance in the coming years.

Fast and eco-friendly method using atmospheric solids analysis probe mass spectrometry to characterize orange varieties

Orange fruit is one of the most popular types of fruit in the world, and its juice is the main product of its processing. This study aimed to evaluate a simple, fast, and eco-friendly methodology, atmospheric solids analysis probe mass spectrometry (ASAP-MS), to assess the chemical profile of four oranges varieties (Valencia, Folha Murcha, Pera, and Iapar). The oranges' varieties were evaluated for the physicochemical composition (extraction yield, pH, total titratable acidity, total soluble solids [TSS], °Brix), ratio (TSS/TA), and bioactive compounds (ASAP-MS analysis). The characterization of oranges resulted in great values of oranges yield according to the varieties (44.00-48.10% [w/w], adequate and characteristic acidity [0.73-1.35%], soluble solids content (10.24-13.80°Brix), pH (3.30-3.96), and ratio (7.59-19.90) level for this fruit. This powerful method showed that all analysis procedures were simple, fast, and easy because there is no need to prepare the sample and the analysis time lasted 2 min. Besides, results obtained exhibited a vast array of chemical groups. Principal component analysis (PCA) defined and distinguished the varieties of the orange. Therefore, ASAP-MS and PCA showed that they are very attractive candidates for routine analysis to monitor the varieties of the orange with its pronounced advantages, besides being contributing to the environment because it does not use any quantities of organic solvents. This methodology was applied for the first time to this type of sample.