Catechin-loaded calcium pectinate microparticles reinforced with liposome and hydroxypropylmethylcellulose: Optimization and in vivo antioxidant activity

Synthesis and characterization of fucoidan/chitosan-coated nanoliposomes for enhanced stability and oral bioavailability of hydrophilic catechin and hydrophobic juglone

This study aimed to improve the thermodynamic performance of nanoliposomes (NLs) using fucoidan (F) as the second-layer coating biopolymer along with chitosan (CS), to control the delivery and bioavailability of catechin (C) and juglone (J). The stabilized liposomal carrier of F/CS-conjugated JC-NL (F-CS-JC-NL) was developed with optimum concentrations of CS (0.09 wt%) and F (0.10 wt%), with the highest encapsulation efficiency of juglone (95.47%) and catechin (90.88%). Physicochemical characterization revealed that F-CS-JC-NL disclosed improved stability under different pH and ionic strengths, with the maximum juglone/catechin retention under thermal, oxidative and storage conditions. In vitro digestion revealed that NL double-coating (F-CS-JC-NL) significantly reduced compound leakage in the gastrointestinal tract, providing a controlled release and better bioavailability of juglone/catechin compared to CS-JC-NL and JC-NL. Conclusively, this study provides a novel NL-based delivery carrier with enhanced physicochemical stability and controlled release that might have promising use in delivering functional ingredients.

Opportunities and challenges for the nanodelivery of green tea catechins in functional foods

Green tea, the least processed tea product, is scientifically known for its rich antioxidant content originating from polyphenols, especially catechins. The most potent green tea catechin is epigallocatechin-3-gallate (EGCG), which is responsible for a wide range of health benefits including anticancer, antidiabetics, and anti-inflammatory properties. However, green tea catechins (GTCs) are very labile under both environmental and gastrointestinal conditions; their chemical stability and bioavailability primarily depend on the processing and formulation conditions. Nanocarriers can protect GTCs against such conditions, and consequently, can be applicable for designing nanodelivery systems suitable for GTCs. In this review, the latest findings about both opportunities and limitations for the nanodelivery of GTCs and their incorporation into various functional food products are discussed. The scientific findings so far confirm that nanodelivery of GTCs can be an efficient approach towards the enhancement of their health-promoting effects with a minimal dose, controlled and targeted release, lessening the dose-related toxicity, and the efficient incorporation into functional foods. However, further investigation is yet needed to fully explain the cellular mechanisms of action of GTCs on human health and to elucidate the effect of encapsulation on their bioefficacy using well-designed, systematic, long-term, and large-scale clinical interventions. There also exists a substantial concern regarding the safety of the manufactured nanoparticles, their absorption, and the associated release mechanisms.

Catechins within the Biopolymer Matrix-Design Concepts and Bioactivity Prospects

Epidemiological studies and clinical investigations proposed that catechins extracts alone may not provide a sufficient level of bioactivities and promising therapeutic effects to achieve health benefits due to a number of constraints related to poor oral absorption, limited bioavailability, sensitivity to oxidation, etc. Modern scientific studies have reported numerous techniques for the design of micro- and nano-bio-delivery systems as novel and promising strategies to overcome these obstacles and to enhance catechins' therapeutic activity. The objective assessment of their benefits, however, requires a critical comparative estimation of the advantages and disadvantages of the designed catechins-biocarrier systems, their biological activities and safety administration aspects. In this respect, the present review objectively outlines, compares and assesses the recent advances related to newly developed design concepts of catechins' encapsulation into various biopolymer carriers and their release behaviour, with a special emphasis on the specific physiological biofunctionalities of the innovative bioflavonoid/biopolymer delivery systems.

Hypromellose - A traditional pharmaceutical excipient with modern applications in oral and oromucosal drug delivery

Hydroxypropylmethylcellulose (HPMC), also known as Hypromellose, is a traditional pharmaceutical excipient widely exploited in oral sustained drug release matrix systems. The choice of numerous viscosity grades and molecular weights available from different manufacturers provides a great variability in its physical-chemical properties and is a basis for its broad successful application in pharmaceutical research, development, and manufacturing. The excellent mucoadhesive properties of HPMC predetermine its use in oromucosal delivery systems including mucoadhesive tablets and films. HPMC also possesses desirable properties for formulating amorphous solid dispersions increasing the oral bioavailability of poorly soluble drugs. Printability and electrospinnability of HPMC are promising features for its application in 3D printed drug products and nanofiber-based drug delivery systems. Nanoparticle-based formulations are extensively explored as antigen and protein carriers for the formulation of oral vaccines, and oral delivery of biologicals including insulin, respectively. HPMC, being a traditional pharmaceutical excipient, has an irreplaceable role in the development of new pharmaceutical technologies, and new drug products leading to continuous manufacturing processes, and personalized medicine. This review firstly provides information on the physical-chemical properties of HPMC and a comprehensive overview of its application in traditional oral drug formulations. Secondly, this review focuses on the application of HPMC in modern pharmaceutical technologies including spray drying, hot-melt extrusion, 3D printing, nanoprecipitation and electrospinning leading to the formulation of printlets, nanoparticle-, microparticle-, and nanofiber-based delivery systems for oral and oromucosal application. Hypromellose is an excellent excipient for formulation of classical dosage forms and advanced drug delivery systems. New methods of hypromellose processing include spray draying, hot-melt extrusion, 3D printing, and electrospinning.

Mucoadhesive Chitosan-Gum Arabic Nanoparticles Enhance the Absorption and Antioxidant Activity of Quercetin in the Intestinal Cellular Environment

Quercetin (QUE)-loaded nanoparticles (QCG-NPs) were fabricated by ionic gelation between chitosan (CS) and gum arabic (GA) at pH 3.5. At constant CS (0.5 mg/mL) and QUE (60 μM) concentrations, QCG-NPs (260-490 nm) were prepared uniformly with 0.8-2.2 mg/mL GA and exhibited high QUE encapsulation efficiency (94.8-98.0%) and sustained QUE release (4.42-8.89% after 8 h). Because of the electrostatic interaction between QCG-NPs and the mucin layer, in vitro mucin and cell adhesion of QUE were significantly (p < 0.05) enhanced in QCG-NPs (0.44-0.48 mg/mL and 31.7-78.5%), respectively, and the adhesiveness was significantly (p < 0.05) increased with an increase of GA. Because particle size and adhesion properties affect the surface area and retention time of QCG-NPs at the absorption site, cell permeation of QUE through simple diffusion by QCG-NPs exhibited the same tendency as the adhesion results. These data were verified in cellular antioxidant and in vivo ferric reducing abilities of plasma assays that evaluated the antioxidant activities of QUE absorbed into an intestinal cell model and rat blood, respectively. The results provide a better understanding of QCG-NP absorption and indicate that QCG-NPs with mucoadhesion properties can be an effective delivery system for improving QUE absorption.

Preparation, Characterization, and Release Kinetics of Chitosan-Coated Nanoliposomes Encapsulating Curcumin in Simulated Environments

Curcumin, a natural polyphenol, has many biological properties, such as anti-inflammatory, antioxidant, and anti-carcinogenic properties, yet, its sensitivity to light, oxygen, and heat, and its low solubility in water renders its preservation and bioavailability challenging. To increase its bioaccessibility, we fabricated nanoliposomes and chitosan-coated nanoliposomes encapsulating curcumin, and we evaluated the systems in terms of their physicochemical characteristics and release profiles in simulated gastrointestinal mediums. Chitosan-coating enhanced the stability of nanoliposomes and slowed the release of curcumin in the simulated gastrointestinal (GI) environment. This study demonstrates that nanoliposomes and chitosan-coated nanoliposomes are promising carriers for poorly soluble lipophilic compounds with low oral bioavailability, such as curcumin.

Bioactive polymeric formulations for wound healing

Ricinoleic acid (RA) has potential to promote wound healing because of its analgesic and anti-inflammatory properties. This study investigates the synthesis and characterization of RA liposomes infused in a hydrogel for topical application. Lecithin liposomes containing RA were prepared and incorporated into a chitosan solution and were subsequently cross-linked with dialdehyde β-cyclodextrin (Di-β-CD). Chitosan/Di-β-CD concentrations and reaction temperatures were varied to alter gelation time, water content, and mechanical properties of the hydrogel in an effort to obtain a wide range of RA release profiles. Hydrogel cross-linking was confirmed by spectroscopy, and liposome and carrier hydrogel morphology via microscopy. Chitosan, Di-β-CD, and liposome concentrations within the formulation affected the extent of matrix swelling, mechanical strength, and pore and overall morphology. Higher cross-linking density of the hydrogel led to lower water uptake and slower release rate of RA. Optimized formulations resulted in a burst release of RA followed by a steady release pattern accounting for 80% of the encapsulated RA over a period of 48 hours. However, RA concentrations above 0.1 mg/mL were found to be cytotoxic to fibroblast cultures in vitro because of the oily nature of RA. These formulations promoted wound healing when used to treat full thickness skin wounds (2 cm²) in Wister male rats. The wound contraction rates were significantly higher compared to a commercially available topical cream after a time period of 21 days. Histopathological analysis of the RA-liposomal chitosan hydrogel group showed that the epidermis, dermis, and subcutaneous skin layers displayed an accelerated yet normal healing compared to control group.

Collagen-Hydroxypropyl Methylcellulose Membranes for Corneal Regeneration

To improve intraocular transparency of collagen matrices, hydroxypropyl methylcellulose (HPMC) was introduced for the first time into cross-linked collagen to form collagen-HPMC composite membranes. Light transmittance and refractive indices of the membranes are enhanced by incorporation of HPMC in comparison to the control of cross-linked collagen membranes. Maximum light transmittance of the collagen-HPMC membrane was up to 92%. In addition, their permeability of nutrients such as glucose, tryptophan, and NaCl was superior or comparable to that of human corneas. In vitro results demonstrated that the collagen-HPMC membrane supported adhesion and proliferation of human corneal epithelial cells (HCECs), showing good cytocompatibility to HCECs. The corneas maintained a smooth surface and clear stroma postoperatively after 7 months of implantation of collagen-HPMC membranes into the corneas of rabbits. The good intraocular biocompatibility was verified by maintaining a high optical clarity for over 6 months after transplantation. Hematoxylin and eosin staining results showed the growth of stromal keratocytes into the collagen-HPMC implants, indicating the ability of the collagen-HPMC membrane to induce corneal cell regeneration. Taken together, the collagen-HPMC membrane might be a promising candidate for use in corneal repair and regeneration.

Nutriosomes: prebiotic delivery systems combining phospholipids, a soluble dextrin and curcumin to counteract intestinal oxidative stress and inflammation

Nutriosomes, new phospholipid nanovesicles specifically designed for intestinal protection were developed by simultaneously loading a water-soluble dextrin (Nutriose® FM06) and a natural antioxidant (curcumin). Nutriosomes were easily fabricated in a one-step, organic solvent-free procedure. The stability and delivery performances of the vesicles were improved by adding hydroxypropyl methylcellulose. All the vesicles were small in size (mean diameter ∼168 nm), negatively charged (zeta potential ∼-38 mV, irrespective of their composition), and self-assembled predominantly in unilamellar vesicles stabilized by the presence of Nutriose®, which was located in both the inter-lamellar and inter-vesicle media, as confirmed by cryo-TEM and SAXS investigation. The dextrin acted also as a cryo-protector, avoiding vesicle collapse during the lyophilization process, and as a protector against high ionic strength and pH changes encountered in the gastrointestinal environment. Thanks to the antioxidant properties of curcumin, nutriosomes provided an optimal protective effect against hydrogen peroxide-induced oxidative stress in Caco-2 cells. Moreover, these innovative vesicles showed promising efficacy in vivo, as they improved the bioavailability and the biodistribution of both curcumin and dextrin upon oral administration, which acted synergically in reducing colonic damage chemically induced in rats.

Nano- and micro-particles for delivery of catechins: Physical and biological performance

Catechins, present in many fruits and vegetables, have many health benefits, but they are prone to degradation. Nano- and micro-particle systems have been used to stabilise catechins when exposed to adverse environments and to improve their bioavailability after ingestion. This review discusses the inherent properties of various catechins, the design of delivery formulations and the properties of catechin-loaded nano- and micro-particles. The protection afforded to catechins during exposure to harsh environmental conditions and gastrointestinal tract transit is reviewed. The bioavailability and efficacy of encapsulated catechins, as assessed by various in vitro and in vivo conditions, are discussed. Bioavailability based on uptake in the upper gut alone underestimates the bioavailability as polyphenols. The caveats with interpretation of bioavailability based on various tests are discussed, when taking into consideration the pathways of catechin metabolism including the role of the gut microflora. However, taken together, the weight of the evidence suggests that there are potentially improved health benefits with the use of appropriately designed nano- and micro-particles for delivery of catechins. Further systematic studies on the metabolism and physiological effects of encapsulated catechins in vivo and clinical trials are needed to validate the bioefficacy of the encapsulated catechins.

Pyrazole-based compounds in chitosan liposomal emulsion for antimicrobial cotton fabrics

The chemistry of pyrazoles has gained increasing attention due to its diverse pharmacological properties such as antiviral, antagonist, antimicrobial, anticancer, anti-inflammatory, analgesic, anti-prostate cancer, herbicidal, acaricidal and insecticidal activities. 1-Phenyl pyrazole-3, 5-diamine, 4-[2-(4-methylphenyl) diazenyl] and 1H- pyrazole-3 (1), 5-diamine, 4-[2-(4-methylphenyl) diazenyl] (2) were synthesized, characterized and encapsulated into liposomal chitosan emulsions for textile finishing. The chemical modifications of cotton fabrics were demonstrated by infrared analysis. Retention of the fabric mechanical properties was investigated by reporting the tensile strength values. Synthesized pyrazole-based compounds were screened for cytotoxicity against skin fibroblast cell line and showed very limited toxicity for both compounds. Antimicrobial potentials of the treated cotton fabrics were tested against bacterial strains E. coli ATCC 8379 and Staphylococcus aureus ATCC 25923.

Chitosan-coated nano-liposomes for the oral delivery of berberine hydrochloride

Berberine hydrochloride (BH) possesses various pharmacological properties including anticancer; unfortunately, it has low oral bioavailability and potential side effects for its parenteral administration. Nanoscale delivery carriers can increase the oral bioavailability of BH. Chitosan has interesting biopharmaceutical properties such as nontoxicity, biocompatibility, biodegradability, and mucoadhesiveness, and the ability to open epithelial tight junctions. This study aims to engineer a chitosan-coated nano-liposomal carrier for the oral delivery of BH. The engineered formulation had a size in the nanoscale range. Chitosan-coated nano-liposomes displayed better stability and slower BH release in the simulated gastrointestinal (GI) environment as compared to the uncoated ones. All values of pharmacokinetic analysis for chitosan-coated nano-liposomes were higher than for uncoated ones. These findings demonstrate that chitosan-coated nano-liposomes are more efficient than uncoated ones for the oral delivery of BH. It can be concluded that the stability and delayed BH release in the simulated GI environment were improved with engineered chitosan-coated nano-liposomes. Moreover, since desirable in vitro and in vivo characteristics were achieved, they are promising release devices for the oral delivery of BH increasing the bioavailability of the drug.

Improved physical and in vitro digestion stability of a polyelectrolyte delivery system based on layer-by-layer self-assembly alginate-chitosan-coated nanoliposomes

To improve lipid membrane stability and prevent leakage of encapsulated food ingredients, a polyelectrolyte delivery system (PDS) based on sodium alginate (AL) and chitosan (CH) coated on the surface of nanoliposomes (NLs) has been prepared and optimized using a layer-by-layer self-assembly deposition technique. Morphology and FTIR observation confirmed PDS has been successfully coated by polymers. Physical stability studies (pH and heat treatment) indicated that the outer-layer polymers could protect the core (NLs) from damage, and PDS showed more intact structure than NLs. Further enzymic digestion stability studies (particle size, surface charge, free fatty acid, and model functional component release) demonstrated that PDS could better resist lipolytic degradation and facilitate a lower level of encapsulated component release in simulated gastrointestinal conditions. This work suggested that deposition of polyelectrolyte on the surface of NLs can stabilize liposomal structure, and PDS could be developed as a formulation for delivering functional food ingredients in the gastrointestinal tract.

Preparation of a tea polyphenol nanoliposome system and its physicochemical properties

Tea polyphenol is rich in green tea with diverse biological activities. However, its application in the food industry is limited due to its instability toward oxygen and light. In this study, the preparation of tea polyphenol liposome by the thin film ultrasonic dispersion method was performed in order to enhance the bioavailability of tea polyphenol. The process conditions were optimized using response surface analysis, and the optimal parameters were as follows: ratio of tea polyphenol to lecithin, 0.125:1; ratio of lecithin to cholesterol, 4:1; phosphate buffered saline (PBS) pH, 6.62; ultrasonic time, 3.5 min. The theoretical and practical entrapment efficiency were 60.36% and 60.09 ± 0.69%, respectively. Furthermore, physicochemical properties including size distribution, zeta potential, permeability, infrared spectrum and in vitro release of liposomal formulations were determined. The mean size of tea polyphenol liposome was 160.4 nm, and the ζ-potential value was -67.2. The tea polyphenol liposome was formed by physical interaction, and the in vitro release process followed a first-order equation. The results indicated that the prepared tea polyphenol liposome was stable and suitable for more widespread application.

Characteristics and antioxidant activity of Elsholtzia splendens extract-loaded nanoparticles

Elsholtzia splendens extract-loaded chitosan nanoparticles prepared by ionic gelation were characterized by particle size, zeta potential, entrapment efficiency, and loading efficiency. As the initial concentration of E. splendens extract was increased, the loading efficiency and zeta potential significantly increased, whereas the entrapment efficiency and particle size significantly decreased. The optimum concentration of E. splendens extract for maximum loading efficiency was found to be 0.8 mg/mL. Both free E. splendens extract and E. splendens extract-loaded chitosan nanoparticles showed concentration-dependent antioxidant activity. However, the lipid peroxidation inhibitory activity of E. splendens extract was effectively enhanced when it was entrapped within chitosan nanoparticles. Chitosan nanoparticle encapsulation is therefore a potentially valuable technique for improving the antioxidant activity of E. splendens extract.