Thermal analysis of β-lactoglobulin complexes with pectins or carrageenan for production of stable biopolymer particles

Improving the efficacy of phenolic extract from Pimpinella affinis in edible oils through nanoencapsulation: Utilizing chitosan and Salvia macrosiphon gum as coating agents

In the present study, a phenolic extract derived from the Pimpinella affinis plant underwent nanoencapsulation. The nanoencapsulation process employed chitosan, Salvia macrosiphon gum (SMG), and a chitosan-SMG complex (1:1) (CCS) as coating agents. The evaluation of nanoemulsions encompassed measurements of particle size, polydispersity index (PDI), ζ-potential, encapsulation efficiency, and intensity distribution parameters. The overall results of these assessments indicated that the nanoemulsion coated with CCS exhibited the most favorable characteristics when compared to other treatments. Subsequently, this specific nanoencapsulated sample was utilized to enhance the oxidative stability of canola oil at concentrations of 100, 200, and 300 ppm (parts per million). Oxidative stability tests, assessed through the total oxidation value (TOTOX) index, highlighted the superior performance of the nanoencapsulated extract, particularly at a concentration of 300 ppm. This enhancement can be attributed to the increased release of phenolic compounds from the CCS coating into the canola oil. The findings illustrate that the nanoencapsulation process can significantly enhance the efficacy of P. affinis extract in improving the oxidative stability of canola oil.

Effects of κ-carrageenan on the emulsifying ability and encapsulation properties of pea protein isolate-grape seed oil emulsions

This work investigated the characteristics of pea protein isolate and κ-carrageenan complexes in stabilizing curcumin-loaded emulsions. The complexes structured by electrostatic attraction exhibited biphasic wettability with increased three-phase contact angles close to 90°. Morphological differences in the complexes were the critical factor influencing their emulsifying ability at various pH. As a steric barrier via increasing net negative charge (up to -54.7 ± 2.4 mV) and adsorbed protein content (92.57 %-97.61 %), the interfacial layer could retard droplet coalescence and improve emulsions stability. Rheological tests verified the higher viscoelasticity of emulsions by raising the oil fraction. After 4 weeks of heating treatment, the chemical stability of curcumin was prominently enhanced from 18.6 ± 0.2 % to 64.3 ± 5.7 %. The confirmed synergistic antioxidant activity between grape seed oil and curcumin in emulsions might facilitate the development of specific functional delivery systems in foods.

Enhancing canola oil's shelf life with nano-encapsulated Mentha aquatica extract for optimal antioxidant performance

Incorporation of antioxidants, such as phenolic compounds into edible oils has limitations such as rapid release of phenolic compounds, low solubility, low penetration, low accessibility, and rapid degradation by environmental compounds. To solve this problem, the nano-encapsulation process is offering promising opportunities. In this research, for the first time, the phenolic extract of Mentha aquatica was nano-encapsulated in nano-emulsions coated with chitosan, Lepidium perfoliatum gum (LPG), and complex of chitosan and LPG (CCL) (1:1 ratio). Based on various tests (particle size measurement, ζ-potential, polydispersity index, encapsulation efficiency index, and intensity curve), the LPG coating was the most optimum option for nano-encapsulation compared to the other coatings. Thus, the LPG-assisted nano-encapsulated phenolic extract of M. aquatica was used to improve the oxidative stability of canola oil at three concentrations (100, 200, and 300 ppm). The results of peroxide value and anisidine index tests (as initial and secondary oxidation indicators, respectively) showed that the nano-encapsulation improved the antioxidant effect of M. aquatica when compared with free extract in canola oil. In a comparative approach, the best sample was obtained from the LPG-assisted nano-encapsulated extract (200 ppm) due to the release of more phenolic compounds. The findings from this study showcase how nano-encapsulation enhances the efficacy of antioxidants in edible oils.

Fabrication of Whey Protein Isolate-Pectin Nanoparticles by Thermal Treatment: Effect of Dynamic High-Pressure Treatment

This study investigated the impact of dynamic high-pressure (DHP) treatment on the ability of whey protein isolate (WPI) to form associative complexes with pectin and to form aggregate particles after their subsequent heat treatment. Light scattering showed that DHP treatments disrupted preexisting WPI aggregates and assembled pectin chains. Complexes formed from WPI/pectin mixtures at pH 4.5 were an order of magnitude smaller when formed after DHP treatment, regardless of the degree of esterification. WPI/pectin complexes formed after DHP treatment were more stable against subsequent pH neutralization than complexes formed without DHP treatment, and WPI/high-methoxyl pectin (HMP) complexes had greater stability than WPI/low-methoxyl pectin (LMP) complexes. WPI/pectin particles prepared by thermal treatment of complexes at pH 4.5 were also smaller when prepared after DHP treatment. WPI/HMP particles were stable to subsequent pH neutralization, while WPI/LMP particles became larger after neutralization.

Nanoencapsulation of Anthocyanins from Red Cabbage (Brassica oleracea L. var. Capitata f. rubra) through Coacervation of Whey Protein Isolate and Apple High Methoxyl Pectin

Encapsulation is a valuable strategy to protect and deliver anthocyanins (ACNs), phenolic compounds with outstanding antioxidant capacity but limited stability. In this study, coacervation was used to encapsulate an ACN-rich red cabbage extract (RCE). Two agri-food by-product polymers, whey protein isolate (WPI) and apple high-methoxyl pectin (HMP), were blended at pH 4.0 in a specific ratio to induce the formation of nanoparticles (NPs). The process optimisation yielded a monodispersed population (PDI < 0.200) of negatively charged (-17 mV) NPs with an average diameter of 380 nm. RCE concentration influenced size, charge, and antioxidant capacity in a dose-dependent manner. NPs were also sensitive to pH increases from 4 to 7, showing a progressive breakdown. The encapsulation efficiency was 30%, with the retention of ACNs within the polymeric matrix being influenced by their chemical structure: diacylated and/or C3-triglucoside forms were more efficiently encapsulated than monoacylated C3-diglucosides. In conclusion, we report a promising, simple, and sustainable method to produce monodispersed NPs for ACN encapsulation and delivery. Evidence of differential binding of ACNs to NPs, dependent on specific acylation/glycosylation patterns, indicates that care must be taken in the choice of the appropriate NP formulation for the encapsulation of phenolic compounds.

Encapsulation of Orange Peel Oil in Biopolymeric Nanocomposites to Control Its Release under Different Conditions

Orange peel oil (OPO) is one of the most common flavorings used in the food industry, but it is volatile under environmental conditions (the presence of light, oxygen, humidity, and high temperatures). Encapsulation by biopolymer nanocomposites is a suitable and novel strategy to improve the bioavailability and stability of OPO and its controlled release. In this study, we investigated the release profile of OPO from freeze-dried optimized nanocomposite powders as a function of pH (3, 7, 11) and temperature (30, 60, and 90 °C), and within a simulated salivary system. Finally, its release kinetics modelling was performed using experimental models. The encapsulation efficiency of OPO within the powders, along with the morphology and size of the particles, were also evaluated by an atomic force microscopy (AFM) analysis. The results showed that the encapsulation efficiency was in the range of 70-88%, and the nanoscale size of the particles was confirmed by AFM. The release profile showed that the lowest and the highest release rates were observed at the temperatures of 30 and 90 °C and in the pH values of 3 and 11, respectively, for all three samples. The Higuchi model provided the best model fitting of the experimental data for the OPO release of all the samples. In general, the OPO encapsulates prepared in this study showed promising characteristics for food flavoring applications. These results suggest that the encapsulation of OPO may be useful for controlling its flavor release under different conditions and during cooking.

Anti-Cancer Pectins and Their Role in Colorectal Cancer Treatment

A class of plant polysaccharides, pectin is known to display several medicinal properties including in cancer. There is some evidence that pectin from some fruits can reduce the severity of colorectal cancer (CRC) due to its antiproliferative, anti-inflammatory, antimetastatic and pro-apoptotic properties. Pectin fermentation in the colon induces antiproliferative activity via butyrate. Research also showed that pectin acts as a potent inducer of programmed cell death and cell-cycle arrest, thereby selectively targeting cancer cells. Pectin can limit oxidative stress to maintain cellular homeostasis while increasing reactive oxygen species damage to activate cancer cell death. Pectin regulates various signaling cascades, e.g., signal transduction and transcriptional activator and mitogen-activated protein kinase signaling, that contribute to its anticancer activity. By curbing inflammation-activated signaling and bolstering immune-protective mechanisms pectin can eradicate CRC. Due to its chemical structure, pectin can also inhibit galectin-3 and suppress tumor growth and metastasis. Prior reports also suggested that pectin is beneficial to use alongside the CRC standard care. Pectin can increase sensitivity to conventional CRC drugs, alleviate unwanted side effects and reduce drug resistance. Although some preclinical studies are promising, early clinical trials are showing some evidence for pectin's efficacy in tumor growth inhibition and preventing metastasis in some cancers; however, the clinical use of pectin in CRC therapy is not yet well established. Further studies are needed to confirm the efficacy of pectin treatment as a valid clinical therapy for CRC in humans.

Polysaccharide Nanoparticles from Isatis indigotica Fort. Root Decoction: Diversity, Cytotoxicity, and Antiviral Activity

It has been revealed that numerous nanoparticles are formed during the boiling preparation of traditional Chinese medical decoctions and culinary soups. They may possess physiological effects different from those of constituent components and are worth paying attention to but are barely noticed and investigated as of yet. In this study, six groups of nanoparticles, whose size ranged from 57 to 300 nm, were successfully isolated from the decoction of Isatis indigotica Fort. root, according to their particle size by the means of size-exclusive chromatography. All of the obtained nanoparticles have a high content of polysaccharides, which distinguishes them from the disclosed BLG protein nanoparticles. They also have high similarities in other compositions, surface charge, and stimuli responses. However, four out of these six nanoparticles (F2, F3, F4, and F5) exhibited significant antiviral activity against influenza virus H1N1, and their antiviral activities and cytotoxicity towards MDCK cells varied with their sizes. It suggested that the antiviral efficacy of BLG decoction could also be from its nanoparticles besides its well-known antiviral phytochemicals. It also implied that the biological effects of these polysaccharide nanoparticles, including cytotoxicity and antiviral activity, may be correlative with the physicochemical properties, especially the particle size.

Interactions of the molecular assembly of polysaccharide-protein systems as encapsulation materials. A review

Studying the interactions of biopolymers like polysaccharides and proteins is quite important mainly due to the wide number of applications such as the stabilization and encapsulation of active compounds in complex systems. Complexation takes place when materials like proteins and polysaccharides are blended to promote the entrapment of active compounds. The interaction forces between the charged groups in the polymeric chains allow the miscibility of the components in the complex system. Understanding the interactions taking place between the polymers as well as between the wall material and the active compound is important when designing delivery systems. However, some features of the biopolymers like structure, functional groups, or electrical charge as well as extrinsic parameters like pH or ratios might affect the structure and the performance of the complex system when used in encapsulation applications. This work summarizes the recent progress of the polysaccharide/protein complexes for encapsulation and the influence of the pH on the structural modifications during the complexation process.

Development of astaxanthin-loaded layer-by-layer emulsions: physicochemical properties and improvement of LPS-induced neuroinflammation in mice

Astaxanthin (AST) has been shown to have neuroprotective effects; however, its bioavailability in vivo is low due to its hydrophobic properties. In this study, lactoferrin (LF) was prepared by heat-treatment at different temperatures, and on this basis, a layer-by-layer self-assembly method was used to construct double-layer emulsions with LF as the inner layer and polysaccharide (beet pectin, BP or carboxymethyl chitosan, CMCS) as the outer layer. Then AST was encapsulated in the emulsions and their physiochemical properties and function were investigated. The results indicated that high temperature heated LF (95 °C) showed a more stable structure than the lower temperature one, and the exposed internal nonpolar groups of LF could give the emulsion an enhanced stability. The rheology results showed that compared with CMCS, the double-layer emulsion formed by BP had a higher viscosity. In addition, the 95 °C LF-AST-BP emulsion showed the best stability among all the bilayer emulsions. The best emulsion was then used as a model drug to investigate its effects on lipopolysaccharide (LPS)-induced neuroinflammation and learning-memory loss in C57BL/6J mice. Through animal behavioral experiments, it was found that dietary supplementation with the AST emulsion could effectively improve the brain cognitive and learning memory impairment caused by inflammation. Transmission electron microscopy, mRNA and western blotting results also illustrated that the AST emulsion could alleviate neuroinflammation caused by LPS. This study provides a feasible scheme for exploring an AST loaded system and may be suitable for food and drug applications.

Effect of heat treatment on the structure and stability of Grass pea (Lathyrus sativus) protein isolate/Alyssum homolocarpum seed gum nanoparticles

In the present study, Grass pea protein isolate (GPPI)- Alyssum homolocarpum seed gum (AHSG) complex nanoparticles were formed through two fabrication methods and their physicochemical properties, structure and stability against sodium chloride and different pHs were investigated. Type 1 particles were formed by creating GPPI nanoparticles, and then coating them with AHSG; while Type 2 particles were fabricated through the heat treatment of GPPI-AHSG complexes at 85 °C for 15 min. The preparation methods did not influence the magnitude of electrical charges on biopolymer particles. The particle size analysis revealed that Type 2 particles had lower mean diameter (d = 360.20 nm) compared to Type 1 particles (d = 463.22 nm). Structural properties of Type 1 and Type 2 particles were determined using Fourier transform infrared (FTIR) spectroscopy, X-ray diffractometry (XRD), Differential scanning calorimetry (DSC), Atomic force microscopy (AFM), and transmission electron microscopy (TEM). Hydrogen bonding, electrostatic and hydrophobic interactions were the main driving forces contributed to the formation of both GPPI-AHSG complex particles. Assessments of morphological and structural properties also indicated that both Type 1 and 2 particles had spherical shapes and heat treatment increased the ordered intermolecular structures in biopolymer particles. Type 2 particles had higher denaturation temperature and better pH and salt stability when compared to Type 1 particles. These results indicate that thermal treatment was effective for the fabrication of stable GPPI-AHSG complex nanoparticles.

Complexation of β-lactoglobulin with gum arabic: Effect of heat treatment and enhanced encapsulation efficiency

Heat treatment is widely used in food industry. Proteins and polysaccharides as important natural polymers in food, under heat treatment, the interactions between them could mediate the conformation and functional properties of proteins. Thermally induced β-lactoglobulin-gum arabic complexes (β-Lg-GA) were fabricated, and the effect of heat treatment on physicochemical properties of the complexes was systematically investigated. The average particle size of β-Lg-GA complexes decreased with temperature increased, at 85°C, a smaller size of 273 nm was obtained. A saturated adsorption of GA was found when mass ratio of β-Lg/GA was <1:2. At pH = 4.2-7.0, electrostatic attraction between β-Lg and GA was low and a fairly constant turbidity was observed, the formed composite particles had good stability to the pH value. Through UV, fluorescence, and FTIR spectroscopy, it was found that formation of the nanoparticles relied on thermal denaturation and aggregation of protein, the electrostatic, hydrophobic, and hydrogen bonding interactions between β-Lg and GA were also important. Scanning electron microscope further indicated β-Lg and GA had good compatibility, and the complexes had a spherical core-shell structure at molecular level. In addition, these prepared natural nanoparticles by heat treatment show significantly higher encapsulation efficiency for (-)-epigallocatechin-3-gallate (EGCG) than that of unheated, thus could be used as a promising carrier for biologically active substances.

Limited hydrolysis and conjugation of zein with chitosan oligosaccharide by enzymatic reaction to improve functional properties

In order to improve its aqueous solubility and emulsifying function, zein was partially hydrolyzed by trypsin and conjugated to chitosan oligosaccharide lactate by transglutaminase. Hydrolysis and covalent linkage to chitosan oligosaccharide was confirmed by free amine content, gel electrophoresis, and infrared spectroscopy. Enzymatic glycosylation was optimized at pH 6, 44 °C, and 4 h to bind approximately 95% of the free amines in the hydrolysates to chitosan oligosaccharide. Hydrolysis and conjugation increased solubility of zein by 47.60% and 72.93%. Hydrolysis and conjugation also decreased surface hydrophobicity by more than 20% and more than doubled emulsifying activity index, emulsion stability index, and foaming capacity. This enzymatic modification has potential to be applied to improve functional properties of other prolamins.

Direct Simulations of Phase Behavior of Mixtures of Oppositely Charged Proteins/Nanoparticles and Polyelectrolytes

We use direct simulations of particle-polyelectrolyte mixtures using the single chain in mean field framework to extract the phase diagram for such systems. At high charges of the particles and low concentration of polymers, we observe the formation of a coacervate phase involving the particles and polyelectrolytes. At low particle charges and/or high concentration of polymers, the mixture undergoes a segregative phase separation into particle-rich and polymer-rich phases, respectively. We also present results for the influence of particle charge heterogeneity on the phase diagram.

Enhancing hygroscopic stability of agave fructans capsules obtained by electrospraying

In this work, different whey protein (WP) ratios (5, 10, 20, 30, 40 and 50% w/w) were added as stabilizers to high degree of polymerization Agave fructans (HDPAF) capsules to decrease the hygroscopicity. Results showed that the WP and HDPAF in 1:520:80 ratio (20/80 w/w) decreased significantly the hygroscopicity of capsules from 12.19 to 8.34%. Additionally, this polymeric mixture was assessed for the encapsulation of sea grape (Coccoloba uvifera L.) leaf extract was achieved by via electrospray, using this biopolymers mixture. Scanning electron microscopy (SEM) images exhibited spherical particles with sizes from 655 to 7250 nm. The thermal stability of encapsulated extract was demonstrated by via thermogravimetric analysis. The in vitro release study in simulated stomach (0-180 min) and intestine conditions (0-300 min) showed the controlled release of the controlled release of the encapsulated extract. The encapsulated extract and its bioavailability in simulating the stomach (0-180 min) and small intestine (0-300 min) Therefore, HDPAF-WP is a viable option as an encapsulating matrix susceptible to be used in the food, pharmaceutical, and cosmetic industries.

Formation of heated whey protein isolate-pectin complexes at pH greater than the isoelectric point with improved emulsification properties

In this study, heated whey protein isolate and pectin complexes (HCPX) formed at pH > isoelectric point (pI) were used to stabilize oil-in-water emulsions containing 5% oil and 1.5% (wt%) protein at pH 5.5. The effects of pectin concentration and heating temperature on emulsification and emulsion stabilization properties were determined. The HCPX were produced by heating mixed 3% (wt) whey protein isolate and pectin (0.1 or 0.3 wt%) at pH 6.2 and 75 or 85°C for 15 min. Aggregate sizes significantly increased with increasing heating temperature but decreased with the addition of pectin. The HCPX became more negatively charged with increasing pectin concentration; however, the effect of heating temperature was significant only at 0.1% pectin. Unheated complexes and HCPX successfully adsorbed at the oil-in-water interface and improved the emulsification properties as shown by higher negative charge and smaller droplet sizes. Despite the presence of pectin, rheological properties of the emulsions were not significantly different. All complexes showed increased emulsion stability; however, HCPX made at 85°C formed emulsions that were the most stable against creaming and heating.

Complexation between whey protein and octenyl succinic anhydride (OSA)-modified starch: Formation and characteristics of soluble complexes

Mixed systems of protein and polysaccharide are widely used in the food industry. It is important for food manufacturers to understand their interactions. In this study, the formation of complexes between whey protein isolate (WPI) and octenyl succinic anhydride (OSA)-modified starch was investigated as a function of pH and protein: starch ratio. OSA-modified starch tended to interact with heated WPI (HWPI) rather than non-heated WPI (NWPI), and the optimum conditions for their complexation were a protein: starch ratio of 1:10 and pH 4.5, probably driven by both electrostatic and hydrophobic interactions. The effects of the degree of substitution (DS) and molecular weight (Mw) of OSA-modified starch on the properties of the complexes formed under the optimum conditions were investigated using absorbance measurements (at 515 nm). Soluble complexes (HWPI-OSA SC) between 0.5% (w/v) HWPI and 5% (w/v) OSA-modified starch with a Mw of 19.24 ± 0.07 × 10⁴ g/mol and a DS of 4.29 ± 0.11% could be formed at pH 4.5. The structure of HWPI-OSA SC was examined using transmission electron microscopy (TEM), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). Characterization of the HWPI-OSA SC revealed that the intermolecular interactions between HWPI and OSA-modified starch led to their different characteristics from HWPI and OSA-modified starch alone.

Exceptional colloidal stability of acidified whey protein beverages stabilized by soybean soluble polysaccharide

Protein-rich beverages have gained significant attention in recent years. It is a challenge to produce whey protein beverages with high stability, good transparency, and a smooth mouthfeel. The polysaccharide (PS)-protein complex might help the food industry overcome these obstacles. In this study, soybean soluble polysaccharide (SSPS) and high methoxylated pectin (HMP, a traditional PS) are used, at different ratios to the protein, to improve the colloidal stability of the acidified whey protein solution. Both heated and unheated complexes were studied. SSPS-whey protein complexes have shown exceptional stabilities in all ratios while HMP-whey protein complexes revealed coacervation after 72 hr of storage. The prepared complexes exhibited comparable sizes and ζ-potentials. The SSPS-whey protein complexes were less turbid than HMP-whey protein complexes at similar PS to protein ratios. Results also show that greater repulsive interactions occurred in SSPS-whey protein complexes when compared to HMP-whey protein complexes, as examined by free thiol content and intrinsic fluorescence intensity measurements. PRACTICAL APPLICATION: It is a challenge to produce whey protein isolate (WPI) beverages with high stability, good transparency, and smooth mouthfeel. The polysaccharide (PS)-protein complex might help the food industry overcome these obstacles. We have demonstrated that soybean soluble polysaccharide (SSPS), at [SSPS]:[acWPI] ratios of 1:2 to 1:30, can significantly improve the colloidal stability of the acidified whey protein beverages. This SSPS-whey protein system could be used as a stable beverage base for a variety of beverages.

Food-Grade Emulsions and Emulsion Gels Prepared by Soy Protein-Pectin Complex Nanoparticles and Glycyrrhizic Acid Nanofibrils

Glycyrrhizic acid (GA) and GA nanofibrils (GN) have been shown to be efficient natural emulsifiers for formation and stabilization of food emulsions. In this work, the emulsion properties of GN in the presence of soy protein isolate-pectin complex nanoparticles (SPNPs) were studied to understand the impact of the nanofibril-nanoparticle interactions on emulsion stabilization. In the presence of low GN concentrations (0.1-0.5 wt %), the synergy in reducing the interfacial tension was observed due to SPNPs-GN complexation in the bulk and at the interface by hydrogen bonding, endowing the prepared emulsions with an overall smaller droplet size. However, obvious flocculation and clustering of oil droplets occurred in these emulsions (especially at 0.25 and 0.5 wt % GN), which are probably induced by a depletion mechanism. At high GN concentrations (1-2 wt %), due to the preferential adsorption, the GN mainly dominated the interface and the subsequent formation and properties of emulsions. Accordingly, the self-standing emulsion gels were obtained, showing a small droplet size with d₃₂ of about 1.0-1.5 μm, homogeneous appearance and microstructure, and encouraging rheological properties including high gel strength, shear sensitivity, and good thixotropic recovery. This is mainly attributed to the formation of a fibrillar hydrogel network in the continuous phase as well as around the droplet surfaces.

Structural and Functional Characterization of Laccase-Induced β-Lactoglobulin-Ferulic Acid-Chitosan Ternary Conjugates

The purpose of current research is to design and acquire novel biological macromolecule materials with enhanced functional properties. Chitosan-ferulic acid binary conjugate (CFC) was synthesized based on the carbodiimide-mediated coupling reaction, and then β-lactoglobulin-ferulic acid-chitosan ternary conjugate (BFCC) was fabricated by laccase induction. Furthermore, the impact of laccase concentration on the formation mechanism of BFCC was investigated by the analyses of reaction group content, ultraviolet-visible (UV-vis) absorption, circular dichroism (CD), and fluorescence spectroscopy. Results showed that hetero- and homo-conjugates between CFC and β-lactoglobulin (β-LG) were achievable at the low concentration (≤4 U/mL) and high concentration (≥6 U/mL) of laccase, respectively. The CD spectrum indicated that the interaction with CFC made β-LG more disorderly. Functional evaluation results revealed that the antioxidant activity and thermal stability of BFCC were improved compared with β-LG. The knowledge obtained in the present study provided an effective method to acquire innovative biological macromolecule materials with desirable functional characteristics.

Quantitative analysis of binding affinities and characterization of β-lactoglobulin and λ-carrageenan as a function of pH

λ-Carrageenan (λcar) interacted with β-lactoglobulin (βlg) immediately to form βlg-λcar complexes when used as an additive in milk. The formation of complexes is the key process through which to explore the bioapplication of λcar, which is a complicated process and influenced by many factors. In this study, the formation process and effect of pH were ascertained by the binding affinity, hydrodynamic diameter, and secondary structure. Results showed that the interaction was spontaneously exothermic and the complexes were soluble. The binding affinities (Ka) decreased from 9.0 ± 1.3 × 10⁵ to 1.3 ± 0.8 × 10⁵  M^-1 , and the stoichiometry also decreased as the pH was increased from 4 to 7. Furthermore, DLS showed a larger hydrodynamic diameter of the complexes at lower pH. Moreover, the complexes induced a change in the secondary structural components of βlg at lower pH. PRACTICAL APPLICATIONS: The secondary structure of βlg was changed by the interaction of λcar, which resulted in βlg-λcar complexes under acidic conditions. The soluble βlg-λcar complexes showed a good stability against aggregation. Thus, they can enhance the textural properties and stability of acidic dairy drinks, and can be used to accurately formulate ingredients in the food ingredient industry.

Physico-Chemical Properties of Sugar Beet Pectin-Sodium Caseinate Conjugates via Different Interaction Mechanisms

Polysaccharides and proteins are frequently conjugated through electrostatic attraction, enzymatic cross-linking, and heat treatment (Maillard reaction) to obtain food structuring ingredients, mostly for their application as emulsifiers. The conjugate partners and their interaction type affect performance at acidic or neutral pH and during thermal processing, thus requiring careful selection. Here, the aggregate properties (particle size, conjugate charge, shear viscosity) of three types of sugar beet pectin (SBP)-sodium caseinate (SC) 1:1 conjugates, at acidic and neutral pH (4.5; 7), as well as their thermal processing stability (80 °C), were investigated. The enzymatically cross-linked SBP:SC was more acid tolerant than the electrostatically interacting conjugates. Maillard cross-linked conjugates aggregated at pH 4.5, suggesting poor emulsifier performance in acidic conditions. At pH 7, the three conjugate types showed similar aggregate properties. The results are discussed in terms of structural re-arrangement.

Selenious-β-lactoglobulin induces the apoptosis of human lung cancer A549 cells via an intrinsic mitochondrial pathway

In this study, the cytotoxic activity of selenious-β-lactoglobulin (Se-β-Lg) and the anticancer mechanism were investigated in human lung cancer A549 cells in vitro. MTT assay showed that Se-β-Lg at 200 μg/mL exhibited a significant suppression effect on A549 cells and the maximum inhibition rate reached 90% after 72 h treatment. Flow cytometry analysis revealed that 200 μg/mL of Se-β-Lg induced cell cycle arrest at G0/G1 phase. Cell apoptosis was induced via the generation of reactive oxygen species (ROS) and the decrease of mitochondrial membrane potential (ΔΨm) in a time-dependent manner. Furthermore, Se-β-Lg suppressed the expression of Bcl-2 and improved the level of Bax, leading to the release of cytochrome c and a higher expression of caspase-3 in A549 cells. In summary, Se-β-Lg could induce apoptosis in A549 cells via an intrinsic mitochondrial pathway and it might serve as a potential therapeutic agent for human lung cancer.

Protein-polysaccharide nanohybrids: Hybridization techniques and drug delivery applications

Complex nanosystems fabricated by hybridization of different types of materials such as lipids, proteins, or polysaccharides are usually superior to simple ones in terms of features and applications. Proteins and polysaccharides hold great potential for development of nanocarriers for drug delivery purposes based on their unique biocompatibility, biodegradability, ease of functionalization, improved biodistribution and minimal toxicity profiles. Protein-polysaccharide nanohybrids have gained a lot of attention in the past few years particularly for drug delivery applications. In this review, different hybridization techniques utilized in the fabrication of such nanohybrids including electrostatic complexation, Maillard conjugation, chemical coupling and electrospinning were thoroughly reviewed. Moreover, various formulation factors affecting the characteristics of the formed nanohybrids were discussed. We also reviewed in depth the outcomes of such hybridization ranging from stability enhancement, to toxicity reduction, improved biocompatibility, and drug release modulation. We also gave an insight on their limitations and what hinders their clinical translation and market introduction.

Fucoidan improves the structural integrity and the molecular stability of β-lactoglobulin

β-lactoglobulin (β-lg) was covalently bonded with fucoidan through Maillard reaction at 60 °C for 96 h under 79% RH condition. The molecular characters of the conjugate were investigated using fourier transform infrared spectroscopy (FT-IR), atomic force microscopy (AFM), and circular dichroism (CD) spectroscopy. And, its thermal properties, surface activity, and zeta-potential were compared with intact β-lg, β-lg-fucoidan mixture, and fucoidan under different pH conditions. AFM indicated that the conjugate was nano-structured, regular spherical-shaped and generally large sized compared to β-lg-fucoidan mixture. CD spectra and FT-IR showed that tertiary structure of β-lg slightly unfolded, but little change in secondary structure occurred. This explained that glycation under Maillard condition resulted in a molten globule state of β-lg. Differential scanning calorimetry (DSC) data exhibited that fucoidan shifted the temperature of phase transition and improved thermal stability of β-lg molecule. In addition, the conjugate prominently decreased the surface tension with pH-dependency.

Complex Coacervation of Milk Proteins with Sodium Alginate

Beta-lactoglobulin (BLG) and bovine serum albumin (BSA) coacervate formation with sodium alginate (ALG) was investigated by turbidimetric analysis, zeta potential, particle size, viscosity, transmission electron microscopy (TEM) and isothermal titration calorimetric (ITC) measurements as a function of pH (1.0-7.0) and protein/alginate mixing ratio (1:1, 1.5:1, 2:1, 1:0, and 0:1 wt.). Critical pH values of phase transitions for BSA-ALG complexes (pH_C, pH_φ1, and pHφ_φ2) representing the formation of soluble and insoluble complexes of a protein-ALG mixture (2:1) at pH 4.8, 4.2, and 1.8, respectively. In the case of BLG-ALG, critical pH values (pH_C, pH_φ1, and pH_φ2) were found to be 4.8, 4.2, and 1.6, respectively. The pH_opt values, expressed by the highest optical density, were pH 2.8 for BSA-ALG and 2.4 for BLG-ALG. TEM and zeta-potential results showed that maximum coacervate formation occurred at pH 4.2 for both protein-polysaccharide solutions. The interaction between BLG-ALG and BSA-ALG was spontaneously exothermic at pH 4.2 according to ITC measurements. The findings of this study provide insights to a thorough understanding about the nature of interactions between milk proteins and ALG and formulate new applications for food, pharmaceutical, nutraceutical, and cosmetics applications.

Ultrasound impact on whey protein concentrate-pectin complexes and in the O/W emulsions with low oil soybean content stabilization

Consumers' preference for products with reduced levels of fat increased in the last years. Proteins and polysaccharides have an important role due to their functional and interaction properties because, when combined in ratios and pH of higher potential for electrostatic interactions they may act as emulsifiers or stabilizers. This study evaluated the ultrasound impact on the electrostatic interaction between pectin (PEC) and whey protein concentrate (WPC) at different WPC:PEC ratios (1:1 to 5:1), and its effect on the emulsification and stability of emulsions formulated with WPC:PEC blends (1:1, 4:1) at low soybean oil contents (5 to 15%). Zeta potential analysis showed greater interactions between biopolymers at pH 3.5, which was proven in FTIR spectra. Rheology and turbidimetry showed that the ultrasound reduced the suspension viscosity and the size of the biopolymer complexes. Suspensions were Newtonian, whereas the emulsions showed shear-thinning behavior with slight increase in apparent viscosity as a function of oil content, and remained stable for seven days, with small droplets (<8 μm) stabilized and entrapped in a pectin network evidenced by confocal laser microscopy. Sonication was successfully applied to emulsion stabilization, improving the functional properties of WPC:PEC blends and enabling their application as low-fat systems, providing healthier products to consumers.