The role of glycinin in the formation of gel-like soy protein-stabilized emulsions

Effect of heat treatment on the physical stability, interfacial composition and protein-lipid co-oxidation of whey protein isolate-stabilised O/W emulsions

This work aimed to investigate the effects of heat treatments at different temperatures (60, 70 and 90 °C, expressed as HT-60, HT-70 and HT-90) on interfacial composition and protein-lipid co-oxidation in whey protein isolate (WPI)-stabilised O/W emulsions during storage. Compared with control group, all heated emulsions exhibited weaker physical stability over 10 days of storage, which verified by the increased droplet size, as well as decreased adsorbed protein levels and absolute ζ-potential values. Moreover, proteins recovered from the HT-90 emulsion showed the highest fluorescence intensity and red-shift of the maximum emission wavelength, indicating partial unfolding of the protein structure. Meanwhile, severe changes in protein structure were also observed in the HT-70 and HT-90 emulsions, which clearly verified by the degradation of bovine serum albumin, α-lactalbumin and β-lactoglobulin. Furthermore, HT-70 and HT-90 emulsions showed lower levels of lipid hydroperoxides and thiobarbituric acid reactive substances. In contrast, the recovered proteins were subject to severe oxidative stress as indicated by carbonyl and N'-formyl-L-kynurenine. Hierarchical cluster and correlation analysis implied that the process of protein-lipid co-oxidation is inevitable, but it can be retarded by heat treatment. Our results clearly revealed the relevance among heat treatment, interfacial adsorption property, and the protein-lipid co-oxidation of O/W emulsions.

Low oil Pickering emulsion gels stabilized by bacterial cellulose nanofiber/soybean protein isolate: An excellent fat replacer for ice cream

Food-grade Pickering emulsion gels with different oil phase fractions stabilized by Bacterial cellulose nanofibers/Soy protein isolate complex colloidal particles were prepared by one-step method. The properties of Pickering emulsion gels with different oil phase fractions (5 %, 10 %, 20 %, 40 %, 60 %, 75 %, v/v) and their applications in ice cream were investigated in the present study. The microstructural results showed that Pickering emulsion gels with the low oil phase fractions (5 %-20 %) were an emulsion droplet-filled gel, where the oil droplets were embedded in the network structure of cross-linked polymer, while Pickering emulsion gels with higher oil phase fractions (40 %-75 %) were an emulsion droplet-aggregated gel, which formed a network structure by flocculated oil droplets. The rheology result showed that the low oil Pickering emulsion gels had the same excellent performance as the high oil Pickering emulsion gels. Furthermore, the low oil Pickering emulsion gels showed good environmental stability under harsh conditions. Consequently, Pickering emulsion gels with 5 % oil phase fraction were used as fat replacers in ice cream and ice cream with different fat replacement rates (30 %, 60 % and 90 %, w/w) was prepared in this work. The results showed the appearance and texture of the ice cream with low oil Pickering emulsion gels as fat replacers was similar to that of the ice cream with no fat replacers, and the melting rate of the ice cream with low oil Pickering emulsion gels as fat replacers showed the lowest value of 21.08 % during the 45 min of melting experiment, as the fat replacer rate in the ice cream reached to 90 %. Therefore, this study demonstrated that low oil Pickering emulsion gels were excellent fat replacers and had great potential application in low calorie food production.

Heat treatment in the presence of arginine increases the emulsifying properties of soy proteins

This study aimed to improve the emulsifying properties of commercial soy protein isolates (CSPIs). CSPIs were thermally denatured without additives (CSPI_H) and with arginine (CSPI_A), urea (CSPI_U), and guanidine hydrochloride (CSPI_G), which improve protein solubility to prevent aggregation. These additives were removed by dialysis, and the samples were lyophilized. CSPI_A resulted in high emulsifying properties. FT-IR analysis showed that the β-sheet content in CSPI_A was reduced compared to that of untreated CSPI (CSPI_F). Fluorescence analysis showed that the tryptophan-derived emission peak of CSPI_A shifted between CSPI_F and CSPI_H which was exposed to hydrophobic amino acid chains with aggregation. As a result, the structure of CSPI_A became moderately unfolded and exposed the hydrophobic amino acid chains without aggregation. The CSPI_A solution had a more reduced oil-water interface tension than other CSPIs. These results support that CSPI_A attaches efficiently to the oil-water interface and produces small, less flocculated emulsions.

Physicochemical, structural and functional properties of protein isolates and major protein fractions from common vetch (Vicia sativa L.)

Common vetch (CV), a leguminous crop cultivated for green manure and fodder rich in protein and starch, is widespread over much area of the northern hemisphere. Its seeds can be used as a protein source to human consumption. CV protein isolates (CVPI) and major protein fractions (CV albumin protein, CVAP; CV globulin protein, CVGP; CV glutelin protein, CVGTP) from 4 samples were investigated the properties to facilitate full use of protein resources. Protein comprises 27.70 %-32.14 % of the dry CV seed weight, which is mainly composed by CVAP (26.79 %-56.12 %) and CVGP (22.78 %-52.42 %). CVPI, CVAP and CVGP mainly presented 7S and 11S components. CVGTP mainly contained the 11S component. They showed difference in thermal properties and surface hydrophobicity. Circular dichroism data showed that α-helix was their major secondary structure. CVPI and major protein fractions exhibited a U-shape protein solubility. CVPI and CVAP had advantages in emulsifying and foaming properties. This study provided novel insights on unexploited sources of CV proteins with interesting characteristics in terms of potential uses as protein-based foods.

High Internal-Phase Pickering Emulsions Stabilized by Xanthan Gum/Lysozyme Nanoparticles: Rheological and Microstructural Perspective

Food-grade high internal-phase Pickering emulsions (HIPPEs) stabilized by solid or colloidal particles with different advantages have attracted extensive attention nowadays. However, looking for new appropriate particle stabilizers is the common practice for HIPPEs preparation. It is crucial to find a new strategy for the development of functional HIPPEs with controllable properties. In this study, a high concentration of xanthan gum/lysozyme nanoparticles (XG/Ly NPs) was used for the preparation of HIPPEs for the first time. Visual observations, creaming index (CI), microstructure, and rheology tests were carried out to investigate the potential of XG/Ly NPs as HIPPEs stabilizers. Results indicated that XG/Ly NPs could stabilize oil droplets in the concentration range of 0.5-4% (w/v). The HIPPEs with a minimal particle concentration of 1% exhibited remarkable physical stability. Rheological measurements showed that a high stability of solid-like HIPPEs was successfully obtained with a higher concentration of XG/Ly NPs. Overall, the HIPPEs stabilized by different concentrations of XG/Ly NPs exhibited excellent rheological and structural properties, which might provide a feasible strategy for the development of functional emulsion systems with controllable structures.

Protein-based hydrogelled emulsions and their application as fat replacers in meat products: A review

Recent consumers' concerns about diet and its health benefits has triggered a reduction in consumption of foods rich in sugar, fat, salt, and chemical additives. As a result, an expanded market for functional foods has arisen. In particular, high-fat foods normally composed by saturated fatty acids, cholesterol and trans-fatty acids have been reformulated to be healthier. The primary source of saturated fat ingested by humans includes meats and their by-products that have animal fat as lipid source. The reformulation of these products therefore represents an important strategy to make them healthier for human consumption. Substituting solid fat by unsaturated oils usually affects the texture of the products, and therefore, new structuring methods must be developed to provide vegetable oils a similar characteristic to solid fats and improve their functional and health-related properties. Among these structural models, gelled emulsions (GE) show great potential to be used as healthier lipid ingredients in low-calorie and reduced-fat products, including healthier meat products. This review addresses the GE properties to be used as structuring agent, their in vitro bioaccessibility in meat products and effect on technological, sensorial, microstructural and microbiological characteristics.

An Overview of Pickering Emulsions: Solid-Particle Materials, Classification, Morphology, and Applications

Pickering emulsion, a kind of emulsion stabilized only by solid particles locating at oil-water interface, has been discovered a century ago, while being extensively studied in recent decades. Substituting solid particles for traditional surfactants, Pickering emulsions are more stable against coalescence and can obtain many useful properties. Besides, they are more biocompatible when solid particles employed are relatively safe in vivo. Pickering emulsions can be applied in a wide range of fields, such as biomedicine, food, fine chemical synthesis, cosmetics, and so on, by properly tuning types and properties of solid emulsifiers. In this article, we give an overview of Pickering emulsions, focusing on some kinds of solid particles commonly serving as emulsifiers, three main types of products from Pickering emulsions, morphology of solid particles and as-prepared materials, as well as applications in different fields.

Emulsifying properties of soy protein nanoparticles: influence of the protein concentration and/or emulsification process

The interfacial and emulsifying properties of soy protein isolate nanoparticles formed by combined treatments of heating and electrostatic screening, as affected by variation of the protein concentration (c) and emulsification process, were investigated. These nanoparticles (with a z-average diameter of 103 nm at c = 0.1%, w/v) tended to aggregate at higher c values, and their internal structure was mainly maintained by hydrophobic interactions and disulfide bondings. In general, increasing c progressively favored diffusion and/or adsorption at the interface and formation of finer emulsions; increasing the energy input level of emulsification improved the emulsification efficiency and extent of droplet flocculation, as well as the emulsion coalescence and creaming stability. The rheological and creaming behavior of these emulsions was predominately determined by the amount of proteins adsorbed at the interface. The results confirmed that these nanoparticles can formulate Pickering emulsions with properties tailored by selecting c and the emulsification process.

Soy protein nanoparticle aggregates as pickering stabilizers for oil-in-water emulsions

In recent years, there have been increasing interests in developing food-grade Pickering stabilizers, due to their potential applications in formulations of novel functional foods. The present work was to investigate the potential of soy proteins to be developed into a kind of Pickering-like stabilizer for oil-in-water emulsions. The nanoparticle aggregates of soy protein isolate (SPI) were formed by sequential treatments of heating at 95 °C for 15 min and then electrostatic screening with NaCl addition. The particle size and microstructure of these aggregates were characterized using dynamic light scattering and atomic force microscopy, indicating that the fabricated nanoparticle aggregates were ∼100 nm in size with more surface hydrophobic nature (relative to unheated SPI). The influence of particle concentration (c; 0.5-6.0%, w/w) and increasing oil fraction (ϕ; in the range 0.2-0.6) on the droplet size and coalescence and/or creaming stability of the emulsions stabilized by these nanoparticle aggregates was investigated. The results showed that, at ϕ = 0.2, increasing the c resulted in a progressive but slight decrease in droplet size, and improved the stability against coalescence and creaming; at a specific c, the creaming stability was progressively increased by increasing the ϕ, with better improvement observed at a higher c (e.g., 6.0% vs 2.0%). The improvement of creaming stability was largely associated with the formation of a gel-like network that could entrap the oil droplets within the network. The observations are generally consistent with those observed for the conventional Pickering emulsions, confirming that soy proteins could be applied as a kind of effective Pickering-like stabilizer. The finding may have important implications for the design and fabrication of protein-based emulsion formulations, and even for the development of soy protein products with some unique functions. To the authors' knowledge, this is the first work to report that heat-induced soy protein aggregates exhibit a good potential to act as Pickering-type stabilizers.