Emulsions stabilization by lactoferrin nano-particles under in vitro digestion conditions

Sex-Based Differences in the In Vitro Digestibility of MCT Emulsions Stabilized by Various Emulsifiers

Consumer sex influences phenotypic differences in digestive functions that may underlie variations in food disintegration. This study used an in vitro digestion model to test the hypothesis that emulsions follow distinct digestive pathways in men and women. Model emulsions were prepared using medium-chain triglycerides stabilized by beta-lactoglobulin, alpha-lactalbumin, or lactoferrin, and by three non-protein emulsifiers: Tween 80, lecithin, and sucrose esters. All emulsions were produced by high-pressure homogenization (0.57 MPa, 5 passes) and then subjected to in vitro digestion under simulated conditions of the male or female gastrointestine. Digesta samples were analyzed via confocal microscopy and laser-based particle sizing, revealing that protein-stabilized emulsions were responsive to physiological differences between males and females, whereas emulsions stabilized by non-protein emulsifiers remained mostly unaffected by sex-based differences. Absolute differential analyses of emulsion droplet size-distribution curves showed that changes in breakdown trajectories for emulsions were pronouncedly noticeable in gastric effluents. Further, SDS-PAGE analysis of digesta showed that breakdown patterns of protein-stabilized emulsions are consistent with prior evidence found for healthy adults; however, results under female gut conditions indicated variations in protein clotting that may alter bioaccessible levels of bioactive peptides. Thus, this study underscores the importance of considering consumer biological sex in food design, especially regarding emulsion-based products for targeted digestive responses.

Stabilization of Oil-in-Water Pickering Emulsions by Surface-Functionalized Cellulose Hydrogel

An amphiphilic cellulose (CLH) hydrogel was synthesized via grafting of quaternary ammonium groups onto cellulose. The structural properties of CLH were characterized via Fourier transform infrared (FTIR)/13C solid-state NMR spectroscopy, elemental (CHN) analysis, particle size distribution (PSD), thermogravimetric analysis (TGA), and wettability was assessed through contact angle measurements. Pickering emulsions of apolar oils in water were prepared using variable weights of the CLH hydrogel as the stabilizing agent, along with different methods of agitation (mechanical shaking and sonication). The characterization results for CLH provide support for the successful grafting of quaternary ammonium groups onto cellulose to produce hydrogels. Different methods of agitation of an oil/water mixture revealed the formation of an oil-in-water (O/W) Pickering emulsion that was stable to coalescence for over 14 days. The resulting emulsions showed variable droplet sizes and stability according to the dosage of CLH in the emulsion and the agitation method, where the emulsion droplet size is related to the particle size of CLH. The addition of methyl orange (MO), a probe to evaluate the phase partitioning of the dye, had minor effects on the emulsion droplet size, and the emulsion prepared with 0.8 wt.% of CLH and agitated via sonication exhibited the smallest droplet size and greatest stability. This study is anticipated to catalyze further research and the development of low-cost and sustainable biopolymer hydrogels as stabilizers for tunable Pickering emulsion. Grafted cellulose materials of this type represent versatile stabilizing agents for foods, agrochemicals, and pharmaceutical products and technologies.

Construction of highly stable, monodisperse water-in-water Pickering emulsions with full particle coverage using a composite system of microfluidics and helical coiled tube

Water-in-water (W/W) Pickering emulsions, exhibit considerable potential in the food and pharmaceutical fields owing to their compartmentalization and high biocompatibility. However, constrained by the non-uniform distribution of shear forces during emulsification or the spatial obstruction in polydimethylsiloxane (PDMS) passive microfluidic platform, the existing methods cannot generate monodisperse W/W Pickering emulsions with high particle coverage rate, thereby limiting their applications. Herein, a novel microfluidic system is designed for the preparation of monodisperse and highly particle-covered W/W Pickering emulsions under mild conditions. pH-responsive Polyethylene glycol (PEG)/phosphate aqueous two-phase system (ATPS) is used for the emulsions' preparation. Notably, a coverage rate of 96 ± 3 % is obtained by adjusting the length of the helical coiled tube, as well as the size and contact angle of genipin cross-linked BSA (BSA-GP) particles. Moreover, these W/W Pickering emulsions, with surfaces almost completely covered, can maintain monodisperse (Ncoal = 1.18 ± 0.03) for one day. Furthermore, the results of ranitidine hydrochloride (RH) release demonstrated that the drug release rate of W/W Pickering emulsions in the simulated gastric fluid (SGF) was 10 times faster than that in the neutral solution. We believe that the highly particle-covered monodisperse W/W Pickering emulsions possess great potential applications in bioencapsulation for foods and drug delivery.

Advances of protein-based emulsion gels as fat analogues: Systematic classification, formation mechanism, and food application

Fat plays a pivotal role in the appearance, flavor, texture, and palatability of food. However, excessive fat consumption poses a significant risk for chronic ailments such as obesity, hypercholesterolemia, and cardiovascular disease. Therefore, the development of green, healthy, and stable protein-based emulsion gel as an alternative to traditional fats represents a novel approach to designing low-fat food. This paper reviews the emulsification behavior of proteins from different sources to gain a comprehensive understanding of their potential in the development of emulsion gels with fat-analog properties. It further investigates the emulsifying potential of protein combined with diverse substances. Then, the mechanisms of protein-stabilized emulsion gels with fat-analog properties are discussed, mainly involving single proteins, proteins-polysaccharides, as well as proteins-polyphenols. Moreover, the potential applications of protein emulsion gels as fat analogues in the food industry are also encompassed. By combining natural proteins with other components such as polysaccharides, polyphenols, or biopolymers, it is possible to enhance the stability of the emulsion gels and improve its fat-analog texture properties. In addition to their advantages in protecting oil oxidation, limiting hydrogenated oil intake, and delivering bioactive substances, protein-based emulsion gels have potential in food 3D printing and the development of specialty fats for plant-based meat.

Digestive Profiles of Human Milk, Recombinant Human and Bovine Lactoferrin: Comparing the Retained Intact Protein and Peptide Release

Lactoferrin (LF) is a major component of human milk. LF supplementation (currently bovine) supports the immune system and helps maintain iron homeostasis in adults. No recombinant human lactoferrin (rhLF) is available for commercial food use. To determine the extent to which rhLF (Effera™) produced by Komagataella phaffii digests similarly to hmLF, a validated in vitro digestion protocol was carried out. Bovine LF (bLF) was used as an additional control, as it is approved for use in various food categories. This study compared the extent of intact protein retention and the profile of peptides released in hmLF, bLF and rhLF (each with low and high iron saturation) across simulated adult gastric and intestinal digestion using gel electrophoresis, ELISA and LC-MS. Intact LF retention across digestion was similar across LF types, but the highest iron-saturated hmLF had greater retention in the simulated gastric fluid than all other sample types. Peptides identified in digested hmLF samples strongly correlated with digested rhLF samples (0.86 < r < 0.92 in the gastric phase and 0.63 < r < 0.70 in the intestinal phase), whereas digested bLF samples were significantly different. These findings support the potential for rhLF as a food ingredient for human consumption.

Encapsulated Mn-Saturated Lactoferrin as a Safe Source of Manganese Ions for Restoring Probiotic Lactobacillus plantarum

The growth of Lactobacillus plantarum, a member of the Lactobacillus genus, which plays a crucial role in the bacterial microbiome of the gut, is significantly influenced by manganese ions. They can be safely delivered to the intestines by exploiting the chelating abilities of lactoferrin. The aim of this work was to encapsulate lactoferrin saturated with manganese ions (MnLf) in a system based on the Eudragit® RS polymer to protect protein from degradation and manganese release in the gastric environment. The entrapment efficiency was satisfactory, reaching about 95%, and most importantly, manganese ions were not released during microparticles (MPs) formation. The release profile of the protein from the freshly prepared MPs was sustained, with less than 15% of the protein released within the first hour. To achieve similar protein release efficiency, freeze-drying was carried out in the presence of 10% (w/v) mannitol as a cryoprotectant for MPs frozen at -20 °C. MPs with encapsulated MnLf exhibited prebiotic activity towards Lactobacillus plantarum. More importantly, the presence of equivalent levels of manganese ions in free form in the medium, as well as chelating by lactoferrin encapsulated in MPs, had a similar impact on stimulating bacterial growth. This indicates that the bioavailability of manganese ions in our prepared system is very good.

Impact of Incorporating Free Calcium and Magnesium on the Heat Stability of a Dairy- and Soy-Protein-Containing Model Emulsion

This study investigated the impact of calcium chloride (CaCl2) and magnesium chloride (MgCl2) at varying concentrations on a model milk formulation's physical and chemical properties after thermal treatment. The model milk was subjected to two-stage homogenization and pasteurization before being supplemented with different concentrations of CaCl2 or MgCl2. The findings revealed that elevating the concentration of either calcium or magnesium resulted in the milk emulsion having a higher viscosity and median particle size following heating. CaCl2 had a slightly stronger impact than MgCl2, particularly at higher concentrations. The milk samples also exhibited a reduction in the zeta potential as the ionic strength of the salt solution increased, with the CaCl2-fortified milk displaying a slightly lower negative surface charge than the MgCl2-fortified milk at the same dose. The model milk's viscosity was evaluated after adding various salt concentrations and a temperature ramp from 20 to 80 °C. Notably, the viscosity and particle size changes demonstrated a non-linear relationship with increasing mineral levels, where a significant increase was observed at or above 5.0 mM. An emulsion stability analysis also revealed that the de-stabilization pattern of the high salt concentration sample differed significantly from its low salt concentration counterparts. These findings could serve as a basis for the future development of fortified UHT milk with nutritionally beneficial calcium and magnesium in industrial applications.

Encapsulation of Iron-Saturated Lactoferrin for Proteolysis Protection with Preserving Iron Coordination and Sustained Release

Lactoferrin (Lf) is a globular glycoprotein found mainly in milk. It has a very high affinity for iron(III) ions, and its fully saturated form is called holoLf. The antimicrobial, antiviral, anticancer, and immunomodulatory properties of Lf have been studied extensively for the past two decades. However, to demonstrate therapeutic benefits, Lf has to be efficiently delivered to the intestinal tract in its structurally intact form. This work aimed to optimize the encapsulation of holoLf in a system based on the versatile Eudragit® RS polymer to protect Lf against the proteolytic environment of the stomach. Microparticles (MPs) with entrapped holoLf were obtained with satisfactory entrapment efficiency (90-95%), high loading capacity (9.7%), and suitable morphology (spherical without cracks or pores). Detailed studies of the Lf release from the MPs under conditions that included simulated gastric or intestinal fluids, prepared according to the 10th edition of the European Pharmacopeia, showed that MPs partially protected holoLf against enzymatic digestion and ionic iron release. The preincubation of MPs loaded with holoLf under conditions simulating the stomach environment resulted in the release of 40% of Lf from the MPs. The protein released was saturated with iron ions at 33%, was structurally intact, and its iron scavenging properties were preserved.

A nano-Liposomal formulation potentiates antioxidant, anti-inflammatory, and fibrinolytic activities of Allolobophora caliginosa coelomic fluid: formulation and characterization

BACKGROUND

Coelomic fluid, a pharmacologically active compound in earthworms, exhibits a range of biological activities, including antioxidant, anti-inflammatory, and anticancer. However, the biological activities exerted by the coelomic fluid can be restrained by its low bioavailability and stability. Liposomes are progressively utilized as an entrapment system for natural bioactive compounds with poor bioavailability and stability, which could be appropriate for coelomic fluid. Thus, the present study was designed to fabricate, characterize, and evaluate the stability of liposomal formulation for Allolobophora caliginosa coelomic fluid (ACCF) as a natural antioxidant compound.

METHODS

The ACCF-liposomes were developed with a subsequent characterization of their physicochemical attributes. The physical stability, ACCF release behavior, and gastrointestinal stability were evaluated in vitro. The biological activities of ACCF and its liposomal formulation were also determined.

RESULTS

The liposomal formulation of ACCF had a steady characteristic absorption band at 201 nm and a transmittance of 99.20 ± 0.10%. Its average hydrodynamic particle size was 98 nm, with a PDI of 0.29 ± 0.04 and a negative zeta potential (-38.66 ± 0.33mV). TEM further confirmed the formation of vesicular, spherical nano-liposomes with unilamellar configuration. Additionally, a remarkable entrapment efficiency percent (77.58 ± 0.82%) with a permeability rate equal to 3.20 ± 0.31% and a high retention rate (54.16 ± 2.20%) for ACCF-liposomes were observed. The Fourier transform infrared spectroscopy (FTIR) result demonstrated that ACCF successfully entrapped inside liposomes. The ACCF-liposomes exhibited a slow and controlled ACCF release in vitro. Regarding stability studies, the liposomal formulation enhanced the stability of ACCF during storage and at different pH. Furthermore, ACCF-liposomes are highly stable in intestinal digestion conditions comparable to gastric digestion. The current study disclosed that liposomal formulation potentiates the biological activities of ACCF, especially antioxidant, anti-inflammatory, and thrombolytic activities.

CONCLUSION

These promising results offer a novel approach to increasing the bioaccessibility of ACCF, which may be crucial for the development of pharmaceuticals and nutraceutical-enriched functional foods.

In vitro digestion models for the design of safe and nutritious foods

Responsible development of future foods requires in depth understanding of food digestion in the human body based on robust research models, ranging from in vitro models to randomized controlled human trials. This chapter overviews fundamental aspects of food digestion, namely bioaccessibility and bioavailability, and models mirroring gastric, intestinal, and colonic conditions. Second, the chapter demonstrates the potential of in vitro digestion models to help screen adverse effects of food additives, such as Titanium dioxide or carrageenan, or underpin the determinants of macro- and micronutrient digestion in different strata of the population, for example digestion of emulsions. Such efforts support rationalized design of functional foods, such as infant formulae, cheese, cereals and biscuits which are validated in vivo or in randomized controlled trials.

Pickering Emulsions Based in Inorganic Solid Particles: From Product Development to Food Applications

Pickering emulsions (PEs) have attracted attention in different fields, such as food, pharmaceuticals and cosmetics, mainly due to their good physical stability. PEs are a promising strategy to develop functional products since the particles’ oil and water phases can act as carriers of active compounds, providing multiple combinations potentiating synergistic effects. Moreover, they can answer the sustainable and green chemistry issues arising from using conventional emulsifier-based systems. In this context, this review focuses on the applicability of safe inorganic solid particles as emulsion stabilisers, discussing the main stabilisation mechanisms of oil–water interfaces. In particular, it provides evidence for hydroxyapatite (HAp) particles as Pickering stabilisers, discussing the latest advances. The main technologies used to produce PEs are also presented. From an industrial perspective, an effort was made to list new productive technologies at the laboratory scale and discuss their feasibility for scale-up. Finally, the advantages and potential applications of PEs in the food industry are also described. Overall, this review gathers recent developments in the formulation, production and properties of food-grade PEs based on safe inorganic solid particles.

Gastrointestinal Fate and Fatty Acid Release of Pickering Emulsions Stabilized by Mixtures of Plant Protein Microgels + Cellulose Particles: an In Vitro Static Digestion Study

The present study aims to investigate the in vitro intestinal digestion fate of Pickering emulsions with complex dual particle interfaces. Pickering oil-in-water emulsions (PPM-E) stabilized by plant (pea) protein-based microgels (PPM), as well as PPM-E where the interface was additionally covered by cellulose nanocrystals (CNC), were designed at acidic pH (pH 3.0). The gastrointestinal fate of the PPM-E and free fatty acid (FFA) release, was tested via the INFOGEST static in vitro digestion model and data was fitted using theoretical models. Lipid digestion was also monitored using lipase alone bypassing the gastric phase to understand the impact of proteolysis on FFA release. Coalescence was observed in the PPM-stabilized emulsions in the gastric phase, but not in those co-stabilized by CNC. However, coalescence occurred during the intestinal digestion stage, irrespective of the CNC concentration added (1–3 wt % CNC). The presence of CNC lowered the lipolysis kinetics but raised the extent of FFA release as compared to in its absence (p < 0.05), due to lower levels of gastric coalescence, i.e., a higher interfacial area. The trends were similar when just lipase was added with no prior gastric phase, although the extent and rate of FFA release was reduced in all emulsions, highlighting the importance of prior proteolysis in lipolysis of such systems. In summary, an electrostatically self-assembled interfacial structure of two types of oppositely-charged particles (at gastric pH) might be a useful strategy to enable enhanced delivery of lipophilic compounds that require protection in the stomach but release in the intestines.

Preparation of soybean dreg fiber solid emulsifier and its effect on the stability of Pickering emulsion

High purity insoluble dietary fiber (HPIDF) was extracted from Okara by compound enzyme method, and solid emulsifiers with different particle sizes were prepared by wet grinding. Its composition, structure and physicochemical properties were studied, and the influence mechanism of solid emulsifiers with different particle sizes on emulsifying properties and interface stability of Pickering emulsion was systematically studied. The results showed that the particle size of HPIDF decreased significantly, the ζ-potential, contact Angle and swelling capacity of HPIDF ncrease significantly (p < 0.05). HPIDF forms an adsorption layer at the oil-water interface, and some of them are connected to form a bridge network structure, which plays a role of steric hindrance. And the emulsion has excellent stability under different environmental factors. HPIDF are suitable raw materials as natural food-grade solid emulsifiers. It is cost-effective and eco-friendly to realize the high-value utilization of Okara resources, reduce resource waste, and extend the industrial chain.

High internal phase emulsions stabilized by native and heat-treated lactoferrin-carboxymethyl chitosan complexes: Comparison of molecular and granular emulsifiers

While the high internal phase emulsions (HIPEs) have been formed by food-grade biopolymers and granules have been widely reported, it is not known which components are more effective. In this work, we first used heat-treated lactoferrin (LF)-carboxymethyl chitosan (CMCTS) granules and native LF-CMCTS physical mixtures as emulsifiers to form HIPEs. The results showed that the interfacial behavior and emulsifying properties of the two complexes were controlled by the ratio of LF-CMCTS and the optimal ratio of LF to CMCTS was 1:1. Heated LF-CMCTS granules anchored to the water-oil interface and formed an elastic shell to stabilize HIPEs, while unheated LF-CMCTS complexes formed a thick film layer to stabilize HIPEs. Both HIPEs could act as delivery systems loaded with curcumin, and they showed better protection of curcumin than Tween-80 under light. This study provides a new basis for the design of LF-based HIPEs systems loaded with lipophilic food functional ingredients.

Pickering emulsifiers based on enzymatically modified quinoa starches: Preparation, microstructures, hydrophilic property and emulsifying property

Quinoa starch was developed as a new kind of Pickering emulsifier by enzymatic modification. The morphological structure, crystalline structure, lamellar structure, fractal structure, particle size distribution, contact angle, emulsion index (EI), and emulsion micromorphology were studied to explore the relationship between structure characteristics, hydrophilic property, and emulsifying properties of enzymatically modified (EM) quinoa starches. With the increasing enzymatic hydrolysis time in the test range of 0-9 h, particle size of EM quinoa starch decreased, and the broken starch and contact angle of EM quinoa starch increased; the EI value of emulsions with EM quinoa starch increased, and the oil droplet size of emulsions with EM quinoa starch decreased. It suggested that both the smallest particle size and the closest extent of the contact angle to 90° derived the best emulsifying property of EM-9. The EM quinoa starch had higher emulsifying capacity at higher oil volume fraction (Φ) (50%) than at lower Φ (20%), proving that the EM starch has potential to be used as Pickering emulsifiers in higher oil products, such as salad dressing.

Biophysical insights into modulating lipid digestion in food emulsions

During the last decade, major scientific advances on understanding the mechanisms of lipid digestion and metabolism have been made, with a view to addressing health issues (such as obesity) associated with overconsumption of lipid-rich and sucrose-rich foods. As lipids in common foods exist in the form of emulsions, the structuring of emulsions has been one the main strategies for controlling the rate of lipid digestion and absorption, at least from a colloid science viewpoint. Modulating the kinetics of lipid digestion and absorption offers interesting possibilities for developing foods that can provide control of postprandial lipaemia and control the release of lipophilic compounds. Food emulsions can be designed to achieve considerable differences in the kinetics of lipid digestion but most research has been applied to relatively simple model systems and in in vitro digestion models. Further research to translate this knowledge into more complex food systems and to validate the results in human studies is required. One promising approach to delay/control lipid digestion is to alter the stomach emptying rate of lipids, which is largely affected by interactions of emulsion droplets with the food matrices. Food matrices with different responses to the gastric environment and with different interactions between oil droplets and the food matrix can be designed to influence lipid digestion. This review focuses on key scientific advances made during the last decade on understanding the physicochemical and structural modifications of emulsified lipids, mainly from a biophysical science perspective. The review specifically explores different approaches by which the structure and stability of emulsions may be altered to achieve specific lipid digestion kinetics.

Recent Innovations in Emulsion Science and Technology for Food Applications

Emulsion technology has been used for decades in the food industry to create a diverse range of products, including homogenized milk, creams, dips, dressings, sauces, desserts, and toppings. Recently, however, there have been important advances in emulsion science that are leading to new approaches to improving food quality and functionality. This article provides an overview of a number of these advanced emulsion technologies, including Pickering emulsions, high internal phase emulsions (HIPEs), nanoemulsions, and multiple emulsions. Pickering emulsions are stabilized by particle-based emulsifiers, which may be synthetic or natural, rather than conventional molecular emulsifiers. HIPEs are emulsions where the concentration of the disperse phase exceeds the close packing limit (usually >74%), which leads to novel textural properties and high resistance to gravitational separation. Nanoemulsions contain very small droplets (typically d < 200 nm), which leads to useful functional attributes, such as high optical clarity, resistance to gravitational separation and aggregation, rapid digestion, and high bioavailability. Multiple emulsions contain droplets that have smaller immiscible droplets inside them, which can be used for reduced-calorie, encapsulation, and delivery purposes. This new generation of advanced emulsions may lead to food and beverage products with improved quality, health, and sustainability.

Physiological fluid interfaces: Functional microenvironments, drug delivery targets, and first line of defense

Fluid interfaces, i.e. the boundary layer of two liquids or a liquid and a gas, play a vital role in physiological processes as diverse as visual perception, oral health and taste, lipid metabolism, and pulmonary breathing. These fluid interfaces exhibit a complex composition, structure, and rheology tailored to their individual physiological functions. Advances in interfacial thin film techniques have facilitated the analysis of such complex interfaces under physiologically relevant conditions. This allowed new insights on the origin of their physiological functionality, how deviations may cause disease, and has revealed new therapy strategies. Furthermore, the interactions of physiological fluid interfaces with exogenous substances is crucial for understanding certain disorders and exploiting drug delivery routes to or across fluid interfaces. Here, we provide an overview on fluid interfaces with physiological relevance, namely tear films, interfacial aspects of saliva, lipid droplet digestion and storage in the cell, and the functioning of lung surfactant. We elucidate their structure-function relationship, discuss diseases associated with interfacial composition, and describe therapies and drug delivery approaches targeted at fluid interfaces. STATEMENT OF SIGNIFICANCE: Fluid interfaces are inherent to all living organisms and play a vital role in various physiological processes. Examples are the eye tear film, saliva, lipid digestion & storage in cells, and pulmonary breathing. These fluid interfaces exhibit complex interfacial compositions and structures to meet their specific physiological function. We provide an overview on physiological fluid interfaces with a focus on interfacial phenomena. We elucidate their structure-function relationship, discuss diseases associated with interfacial composition, and describe novel therapies and drug delivery approaches targeted at fluid interfaces. This sets the scene for ocular, oral, or pulmonary surface engineering and drug delivery approaches.

Comparison of binary cress seed mucilage (CSM)/β-lactoglobulin (BLG) and ternary CSG-BLG-Ca (calcium) complexes as emulsifiers: Interfacial behavior and freeze-thawing stability

Protein-polysaccharide complexes often exhibit amended techno-functional characteristics when compared to their individual participant biomolecules. In this study, a complex coacervation of cress seed mucilage (CSM)/β-lactoglobulin (Blg) was used for stabilizing oil-in-water emulsions; they were characterized in terms of physical properties, droplet-size distribution and microstructure. Also, a comprehensive study was carried out on interfacial rheological responses and on the corresponding emulsion stability of different complexes. Freeze-thaw stability of the produced emulsions which had from mixtures of CSM-Blg was also evaluated. More than the size of droplets, interfacial rheological characteristics were associated with the properties of the adsorbed layers and with the stability of emulsions in storage. Using the CSM-Blg-Ca ultimately resulted in emulsions that proved stable against creaming, with no sign of phase separation over 3 weeks. These results show protein-polysaccharide complexes as appropriate emulsifiers that can make emulsion-based products resistant to unwanted changes caused by freeze-thawing.

Synergistic Interactions of Plant Protein Microgels and Cellulose Nanocrystals at the Interface and Their Inhibition of the Gastric Digestion of Pickering Emulsions

It is possible that Pickering emulsions can optimize the transport of nutraceuticals, pharmaceuticals, and other bioactive compounds in human physiology. So-called ultrastable Pickering emulsions are often destabilized in the gastric digestion regime if the particles are proteinaceous in nature. The present study seeks to test how the interfacial structure can be engineered via synergistic particle-particle interactions to impact the gastric coalescence of Pickering emulsions. In this study, we designed plant-based protein-particle-stabilized oil-in-water emulsions (PPM-E, with 20 wt % sunflower oil) via pea protein microgels (PPM at 1 wt %). The PPM hydrodynamic diameter is ∼250 nm. In vitro gastric digestion of PPM-E confirmed droplet coalescence within 30 min of pepsin addition. Supposedly surface-active cellulose nanocrystals (CNCs, 1-3 wt %) were added to PPM-E at pH 3.0 to determine if they could act as a barrier to interfacial pepsinolysis due to the CNC and PPM being oppositely charged at this gastric pH value. A combination of confocal microscopy, zeta potential, and Langmuir trough measurements suggested that CNCs and PPMs might form a combined layer at the O/W interface, owing to the electrostatic attraction between them. CNCs at >2 wt % inhibited the pepsinolyis of the adsorbed PPM film and thus droplet coalescence. However, increasing concentrations of CNC also increased the bulk viscosity of the PPM-E and eventually caused gelation of the emulsions, which would also delay their gastric breakdown. In conclusion, tuning the bulk and interfacial structure of Pickering emulsions via synergistic interactions between two types of particles could be an effective strategy to modify the enzymatic breakdown of such emulsions, which would have important applications in pharmaceuticals, foods, and other soft-matter applications.

Comparison of Different Protein Emulsifiers on Physicochemical Properties of β-Carotene-Loaded Nanoemulsion: Effect on Formation, Stability, and In Vitro Digestion

In this study, β-carotene-loaded nanoemulsions are emulsified using four biomacromolecular proteins-peanut protein isolate (PPI), soy protein isolate (SPI), rice bran protein isolate (RBPI), and whey protein isolate (WPI)-in order to explore their emulsion stability and in vitro digestion characteristics. All four nanoemulsions attained high encapsulation levels (over 90%). During the three-stage in vitro digestion model (including oral, gastric, and small intestine digestion phases), the PPI-emulsified nanoemulsion showed the highest lipolysis rates (117.39%) and bioaccessibility (37.39%) among the four nanoemulsions. Moreover, the PPI-emulsified nanoemulsion (with the smallest droplet size) also demonstrated the highest stability during storage and centrifugation, while those for the RBPI-emulsified nanoemulsion (with the largest droplet size) were the lowest. In addition, all four nanoemulsions showed superior oxidation stability when compared with the blank control of corn oil. The oxidation rates of the PPI- and WPI-stabilized groups were slower than the other two groups.

Assembly of Oil-Based Microcapsules Coated with Proanthocyanidins as a Novel Carrier for Hydrophobic Active Compounds

Proanthocyanidins are sustainable materials with amphiphilic characteristic, network-forming capacity, and health benefits, which give them possibility as encapsulating biomaterials. We found that proanthocyanidins from Chinese bayberry leaves and grape seeds (BLPs and GSPs) were able to encapsulate oil to form spherical microcapsules of controlled size and architecture. Microcapsules encapsulated with BLPs and GSPs (BMs and GMs) exhibited different physical stability when subjected to environmental stresses. BMs showed higher physical stability to environmental stresses than GMs. The proanthocyanidin shell could protect β-carotene from chemical degradation. Subsequently, varied gastrointestinal behaviors of the microcapsules were observed in simulated digestion. GMs with low stability reduced the lipid digestion and β-carotene bioaccessibility. BMs with high stability retarded lipid digestion but did not change the amount of hydrolyzed lipids and β-carotene bioaccessibility. Our study demonstrates that BLPs rather than GSPs can be used alone as encapsulating material for protection and targeted delivery of lipophilic bioactive compounds.

Pickering emulsions stabilized by colloidal gel particles complexed or conjugated with biopolymers to enhance bioaccessibility and cellular uptake of curcumin

The aim of this study was to investigate the fate of curcumin (CUR)-loaded Pickering emulsions with complex interfaces during in vitro gastrointestinal transit and test the efficacy of such emulsions on improving the bioaccessibility and cellular uptake of CUR. CUR-loaded Pickering emulsions tested were whey protein nanogel particle-stabilized Pickering emulsions (CUR-E_WPN) and emulsions displaying complex interfaces included 1) layer-by-layer dextran sulphate-coated nanogel-stabilized Pickering emulsions (CUR-DxS+E_WPN) and 2) protein+dextran-conjugated microgel-stabilized Pickering emulsions (CUR-E_WPDxM). The hypothesis was that the presence of complex interfacial material at the droplet surface would provide better protection to the droplets against physiological degradation, particularly under gastric conditions and thus, improve the delivery of CUR to Caco-2 intestinal cells. The emulsions were characterized using droplet sizing, apparent viscosity, confocal and cryo-scanning electron microscopy, zeta-potential, lipid digestion kinetics, bioaccessibility of CUR as well as cell viability and uptake by Caco-2 cells. Emulsion droplets with modified to complex interfacial composition (i.e. CUR-DxS+E_WPN and CUR-E_WPDxM) provided enhanced kinetic stability to the Pickering emulsion droplets against coalescence in the gastric regime as compared to droplets having unmodified interface (i.e. CUR-E_WPN), whereas droplet coalescence occurred in intestinal conditions irrespective of the initial interfacial materials. A similar rate and extent of free fatty acid release occurred in all the emulsions during intestinal digestion (p > 0.05), which correlated with the bioaccessibility of CUR. Striking, CUR-DxS+E_WPN and CUR-E_WPDxM significantly improved cellular CUR uptake as compared to CUR-E_WPN (p < 0.05). These results highlight a promising new strategy of designing gastric-stable Pickering emulsions with complex interfaces to improve the delivery of lipophilic bioactive compounds to the cells for the future design of functional foods.

Effect of thymol and Pickering stabilization on in-vitro digestion fate and oxidation stability of plant-derived flaxseed oil emulsions

The aim of this study was to evaluate the effect of Pickering stabilization by biopolymer-based particles (bioparticles), consisting of flaxseed protein and polysaccharides, and of the addition of thymol to the oil phase on the oxidation stability, and digestion fate of flaxseed oil (FO) emulsions, compared to bulk FO and conventional emulsions stabilized by polysorbate 80 (PS80). Applying Pickering stabilization and thymol simultaneously was a successful approach to retard FO oxidation. Moreover, lipid digestion was slower in bioparticle-stabilized emulsions compared to PS80 stabilized emulsions. The thymol bioaccessibility increased after incorporation into FO Pickering emulsions in comparison to the bulk oil. The results suggested that the combination of Pickering stabilization and thymol addition to the oil phase can be used as a promising way of protecting highly unsaturated oils such as FO against oxidation. These emulsions are also applicable for designing functional foods with controlled lipid digestion.

Cellulose nanocrystals from ultrasound process stabilizing O/W Pickering emulsion

Cellulose nanocrystals (CNC) are bio-based solid particles arisen as promising stabilizers for Pickering emulsions in food, pharmaceutical and cosmetics industries. This study aimed to understand the stabilization mechanism of oil-in-water emulsion using CNC as stabilizing particles. CNC were obtained from cellulose microcrystalline after acid hydrolysis, dialysis, ultrasound treatment and vacuum filtration. Atomic force microscopy (AFM) showed needle-shaped CNC. The CNC presented good stability against agglomeration due to the high electrostatic repulsion between particles, making them feasible to be used in O/W emulsions. O/W emulsions were stabilized by CNC and prepared using rotor-stator and ultrasound as mechanical processes. Emulsions stabilized by CNC were opaque, homogeneous and kinetically stable during few days. Small droplets generated during the ultrasound process, could be covered by cellulose nanoparticles that acted as an effective mechanical barrier against droplets coalescence in a Pickering mechanism. The mechanism of droplets stabilization was associated with electrostatic and steric repulsion between droplets. Emulsions were evaluated varying the proportion between flaxseed oil and cellulose nanocrystals (CNC). Emulsions with a lower proportion of CNC showed better kinetic stability compared to emulsions with higher CNC proportion. After 7 days of storage, the viscosity of emulsions with a higher proportion of CNC particles decreased, which was associated to the emulsion destabilization. Our results improved the understanding of the relationship between the proportions of oil and particles for emulsion properties by evaluating the potential application of CNC as a food emulsifier.

Recent advances of characterization techniques for the formation, physical properties and stability of Pickering emulsion

Recently, there have been increasing demand for the application of Pickering emulsions in various industries due to its combined advantage in terms of cost, quality and sustainability. This review aims to provide a complete overview of the available methodology for the physical characterization of emulsions that are stabilized by solid particles (known as Pickering emulsion). Current approaches and techniques for the analysis of the formation and properties of the Pickering emulsion were outlined along with the expected results of these methods on the emulsions. Besides, the application of modelling techniques has also been elaborated for the effective characterization of Pickering emulsions. Additionally, approaches to assess the stability of Pickering emulsions against physical deformation such as coalescence and gravitational separation were reviewed. Potential future developments of these characterization techniques were also briefly discussed. This review can act as a guide to researchers to better understand the standard procedures of Pickering emulsion assessment and the advanced methods available to date to study these emulsions, down to the minute details.

Assessment of dynamic bioaccessibility of curcumin encapsulated in milled starch particle stabilized Pickering emulsions using TNO's gastrointestinal model

Pickering emulsions stabilized by milled starch particles have been developed as a novel food-grade formulation to enhance the bioaccessibility of poorly soluble bioactive compounds (i.e., curcumin) by controlling the digestion of lipids in the human gastrointestinal (GI) tract. The dynamic bioaccessibilities of curcumin with and without encapsulation in the Pickering emulsion were evaluated using the dynamic TNO's gastrointestinal (TIM-1) model. For comparison, their digestion profiles were also studied using the in vitro pH-stat lipolysis model. With the combination of two in vitro models, the effect of the milled starch particle stabilized Pickering emulsions on the bioaccessibility of curcumin was fully revealed. There are large differences between the bioaccessibility values of curcumin samples obtained by these two models. Simulated small intestinal lipolysis in the pH-stat model revealed that the bioaccessibility of curcumin encapsulated in the Pickering emulsion was 27.6%, which was larger than 22.1% for free curcumin suspended in the bulk oil phase. The bioaccessibility of curcumin was 50.7% in the emulsion system and 7.8% in the bulk oil when using the TIM-1 model, which simulated the digestion conditions of the entire human GI tract. The digestion mechanism of the milled starch particle stabilized Pickering emulsions in the upper GI tract was well elucidated by the TIM-1 model. The gradual release and improved dissolution profile of the milled starch particle stabilized Pickering emulsions highlighted their potential as delivery systems for lipophilic bioactive compounds.

Comparison of protein hydrolysates against their native counterparts in terms of structural and antioxidant properties, and when used as emulsifiers for curcumin nanoemulsions

The stability and in vitro digestion of nanoemulsions stabilized by natural protein hydrolysates (PPI, SPI and WPI) are discussed.

Combining in vitro digestion model with cell culture model: Assessment of encapsulation and delivery of curcumin in milled starch particle stabilized Pickering emulsions

To investigate the encapsulation and oral delivery efficiency of milled starch particles stabilized Pickering emulsions for lipophilic bioactive compounds, in vitro digestion model coupled with Caco-2 cells models were used. Physicochemical and biological properties of curcumin encapsulated Pickering emulsions were analyzed regarding to emulsion structure, curcumin retention, in vitro digestion, in vitro anti-proliferate ability and cellular uptake. Milled starch particles stabilized Pickering emulsion system was able to protect curcumin against harsh gastric conditions. Around 80% of the encapsulated curcumin was retained after 2 h of simulated gastric digestion. By being encapsulated in Pickering emulsion, the bioaccessibility of curcumin was increased from 11% for curcumin in bulk oil phase to 28% under simulated intestinal digestion process. The resulting curcumin-loaded micelle phase from digested emulsion exhibited significant anti-cancer ability and enhanced cellular uptake. This research provides an exploratory study on the possible future application of milled starch particles stabilized Pickering emulsions as nutraceutical delivery vehicles in the creation of novel functional foods.

Fabrication and characterization of functional protein–polysaccharide–polyphenol complexes assembled from lactoferrin, hyaluronic acid and (−)-epigallocatechin gallate

Functional lactoferrin–EGCG–hyaluronic acid complexes could be conditionally assembled at different pH values.