Protection mechanism of alginate microcapsules with different mechanical strength for Lactobacillus plantarum ST-III

Enhancing storage and gastroprotective viability of Lactiplantibacillus plantarum encapsulated by sodium caseinate-inulin-soy protein isolates composites carried within carboxymethyl cellulose hydrogel

Probiotics are subjected to various edible coatings, especially proteins and polysaccharides, which serve as the predominant wall materials, with ultrasound, a sustainable green technology. Herein, sodium caseinate, inulin, and soy protein isolate composites were produced using multi-frequency ultrasound and utilized to encapsulateLactiplantibacillus plantarumto enhance its storage, thermal, and gastrointestinal viability. The physicochemical analyses revealed that the composites with 5 % soy protein isolate treated with ultrasound at 50 kHz exhibited enough repulsion forces to maintain stability, pH resistance, and the ability to encapsulate larger particles and possessed the highest encapsulation efficiency (95.95 %). The structural analyses showed changes in the composite structure at CC, CH, CO, and amino acid residual levels. Rheology, texture, and water-holding capacity demonstrated the production of soft hydrogels with mild chewing and gummy properties, carried the microcapsules without coagulation or sedimentation. Moreover, the viability attributes ofL. plantarumevinced superior encapsulation, protecting them for at least eight weeks and against heat (63 °C), reactive oxidative species (H2O2), and GI conditions.

Improving the survival of Lactobacillus plantarum FZU3013 by phase separated caseinate/alginate gel beads

The phase separation behavior of mixed solution of caseinate (Cas) and alginate (Alg) was investigated. Lactobacillus plantarum FZU3013 was encapsulated using 4 % Cas/1 % Alg gel beads with a phase-separated structure. The bacteria were predominantly distributed in the Alg-rich continuous phase. The use of 4 % Cas/1 % Alg beads resulted in higher encapsulation efficiency for L. plantarum FZU3013 compared to 1 % Alg beads. After 5 weeks of storage at 4 °C, the viable count in 4 % Cas/1 % Alg beads was 8.3 log CFU/g, which was 1.1 log CFU/g higher than that of the 1 % Alg beads. When 1 % Alg beads of the smallest size were subjected to in vitro digestion, no viable bacteria could be detected at the end of the digestion, whereas the 4 % Cas/1 % Alg beads of the smallest size had a viable count of 3.9 log CFU/g. When the size of the 4 % Cas/1 % Alg beads was increased to 1000 μm, the viable count was 7.0 log CFU/g after digestion. The results of infrared spectroscopy and zeta potential indicated that hydrogen bonding and electrostatic interactions between caseinate and alginate reinforced the structure of the gel beads and improved the protection for L. plantarum FZU 3013.

Protective Effect of Alginate Microcapsules with Different Rheological Behavior on Lactiplantibacillus plantarum 299v

Alginate encapsulation is a well-known technique used to protect microorganisms from adverse conditions. However, it is also known that the viscosity of the alginate is dependent on its composition and degree of polymerization and that thermal treatments, such as pasteurization and sterilization, can affect the structure of the polymer and decrease its protection efficiency. The goal of this study was to evaluate the protective effect of encapsulation, using alginates of different viscosities treated at different temperatures, on Lactiplantibacillus plantarum 299v under in vitro gastrointestinal conditions and cold storage at 4 °C and -15 °C, respectively. Steady- and dynamic-shear rheological tests were used to characterize the polymers. Thermal treatments profoundly affected the rheological characteristics of alginates with high and low viscosity. However, the solutions and gels of the low-viscosity alginate were more affected at a temperature of 117 °C. The capsules elaborated with high-viscosity alginate solution and pasteurized at 63 °C for 30 min provided better protection to the cells of L. plantarum 299v under simulated gastrointestinal and cold storage conditions.

The Effect of Encapsulating a Prebiotic-Based Biopolymer Delivery System for Enhanced Probiotic Survival

Orally delivered probiotics must survive transit through harsh environments during gastrointestinal (GI) digestion and be delivered and released into the target site. The aim of this work was to evaluate the survivability and delivery of gel-encapsulated Lactobacillus rhamnosus GG (LGG) to the colon. New hybrid symbiotic beads alginate/prebiotic pullulan/probiotic LGG were obtained by the extrusion method. The average size of the developed beads was 3401 µm (wet), 921 µm (dry) and the bacterial titer was 109 CFU/g. The morphology of the beads was studied by a scanning electron microscope, demonstrating the structure of the bacterial cellulose shell and loading with probiotics. For the first time, we propose adding an enzymatic extract of feces to an artificial colon fluid, which mimics the total hydrolytic activity of the intestinal microbiota. The beads can be digested by fecalase with cellulase activity, indicating intestinal release. The encapsulation of LGG significantly enhanced their viability under simulated GI conditions. However, the beads, in combination with the prebiotic, provided greater protection of bacteria, enhancing their survival and even increasing cell numbers in the capsules. These data suggest the promising prospects of coencapsulation as an innovative delivery method based on the inclusion of probiotic bacteria in a symbiotic matrix.

A decade of developing applications exploiting the properties of polyelectrolyte multilayer capsules

Transferring the layer-by-layer (LbL) coating approach from planar surfaces to spherical templates and subsequently dissolving these templates leads to the fabrication of polyelectrolyte multilayer capsules. The versatility of the coatings of capsules and their flexibility upon bringing in virtually any material into the coatings has quickly drawn substantial attention. Here, we provide an overview of the main developments in this field, highlighting the trends in the last decade. In the beginning, various methods of encapsulation and release are discussed followed by a broad range of applications, which were developed and explored. We also outline the current trends, where the range of applications is continuing to grow, including addition of whole new and different application areas.

Biodegradable Polymers for Microencapsulation Systems

Environmentally friendly alternatives have become sought after upon the development of scientific research and industrial processes. Recent trends suggest biodegradable polymers as the most promising solution for synthetic microcapsule systems. Safety, efficiency, biocompatibility, and biodegradability are some of the properties that biodegradable systems in microencapsulation can provide for a broad spectrum of applications. The controlled release of encapsulated active agents is a research field that, over the years, has been constantly innovating due to the promising applications in the areas of pharmaceutical, cosmetic, textile industry, among others. This article presents an overview of different polymers with potential for microcapsule synthesis, namely, biodegradable polymers. First, natural polymers are discussed, which are divided into two categories: polysaccharide-based polymers (cellulose, starch, chitosan, and alginate) and protein polymers (gelatin). Second, synthetic polymers are described, where biodegradable polymers such as polyesters, polyamides, among others appear as examples. For each polymer, this review presents its origin, relevant properties, applications, and examples found in the literature regarding its use in biodegradable microencapsulation systems.

In vitro digestion of sodium alginate/pectin co-encapsulated Lactobacillus bulgaricus and its application in yogurt bilayer beads

The purpose of this study was to prepare sodium alginate (SA)/pectin (PE) hydrogel microspheres using the extrusion method to encapsulate Lactobacillus bulgaricus. Microscopic observation showed that the beads were spherical with a smooth and uniform surface. For microspheres with a diameter range of 140-156 μm, the encapsulation efficiency reached 85.67%. After simulating saliva, gastric juice, and intestinal juice, the activity of the microcapsules was estimated to be 5.78 × 10⁴ log colony forming unit (CFU)/mL. These data show that the use of SA and PE encapsulated probiotics exhibit enhanced viability. In addition, double-layer beads containing probiotic microspheres and yogurt were prepared, and physical and chemical analysis was performed using scanning electron microscopy, Fourier-transform infrared spectroscopy, and differential scanning calorimetry. Texture and sensory property analysis revealed that the beads had good elasticity, chewiness, and high commercial value. Collectively, these findings indicate that SA and PE can be used for the encapsulation, protection, and gastrointestinal delivery of probiotics. Moreover, these microcapsules exhibit good stability in vitro and improve yogurt characteristics by increasing the survival rate of encapsulated probiotics, thus demonstrating their commercial application potential.

Poly(γ-glutamic acid) Nanocoating To Enhance the Viability of Pseudomonas stutzeri NRCB010 through Cell Surface Engineering

Microbial inoculants can enhance soil quality, promote plant nutrient acquisition, and alleviate problems caused by the excessive use of chemical fertilizers. However, susceptibility to harsh conditions during transport and storage, as well as the short shelf-life of plant growth-promoting rhizobacteria (PGPR), limit industrial application. Herein, a novel strategy to form nanocoating on bacterial surfaces to enhance viability was proposed. The nanocoating was composed of N-hydroxysuccinimide (NHS)-modified poly (γ-glutamic acid) (γ-PGA) and calcium ions, which could adhere to the surface of bacteria by forming covalent bonds and ionic bonds with the bacteria. The bacteria encapsulated in the coating had better resistance against harsh conditions than bare bacteria. The viability of coated bacteria was also increased by 2.38 times compared with bare bacteria after 4 weeks of storage. The pot experiment showed that coated Pseudomonas stutzeri NRCB010 had better growth-promoting properties compared with free P. stutzeri NRCB010. These results indicate that cell surface engineering is an effective method to enhance the resistance of bacteria against harsh conditions and is expected to promote the widespread use of PGPR.

Fundamentals of composites containing fibrous materials and hydrogels: A review on design and development for food applications

The combination of fiber and hydrogel in a system can provide substantial benefits for both components, including the development of three-dimensional structures for the fiber, followed by modifications in the rheological and mechanical properties of the hydrogel. Despite a large increase in the use of fiber-hydrogel composites (FHCs) in various sciences and industries such as biomedicine, tissue engineering, cosmetics, automotive, textile, and agriculture, there is limited information about FHCs in the realm of food application. In this regard, this study reviews the mechanism of FHCs. The force transmission between fiber and hydrogel, which depends on the interactions between them during loading, is the main reason to enhance the mechanical properties of FHCs. Moreover, articles about such FHCs that have the potential for foods or food industries have been described. Additionally, the information gaps about edible FHCs were highlighted for further research. Finally, the methods of fiber formation have been summarized.

Curcumin-loaded core-shell biopolymer nanoparticles produced by the pH-driven method: Physicochemical and release properties

In this study, core-shell biopolymer nanoparticles were fabricated for the encapsulation and delivery of curcumin using a pH-driven method. The influences of the coating composition on the physicochemical properties and curcumin release characteristics of the core-shell nanoparticles were studied. Fourier transform infrared spectroscopy and X-ray diffraction analyses indicated that curcumin was encapsulated in an amorphous state inside the nanoparticles. Particle size and ζ-potential measurements indicated that the biopolymer nanoparticles were relatively stable under different environmental conditions: long term storage, heating, pH changes and salt. The DPPH radical scavenging activity of the curcumin was increased after encapsulation within the nanoparticles, whereas the gastrointestinal release of curcumin was prolonged. These results were attributed to the ability of alginate and NaCas to form a thick layer around the nanoparticles, which increased the steric and electrostatic repulsion between them, as well as inhibiting the release of curcumin.

Membrane shell permeability of Rs-198 microcapsules and their ability for growth promoting bioactivity compound releasing

Microencapsulation of bacteria is an alternative technology to enhance viability during processing and application.

The effectiveness of plant hydrocolloids at maintaining the quality characteristics of the encapsulated form of L-phenylalanine-ammonia-lyase

The effect of three types of polysaccharides (agar-agar, carrageenan, hydroxypropyl methylcellulose) on the activity and stability during storage at given temperature conditions of the enzyme preparation L-phenylalanine ammonia-lyase was studied. It was found that the most suitable storage temperature for encapsulated L-phenylalanine-ammonia-lyase is room temperature up to 25 °C for all samples of capsules from plant polysaccharides. Samples of capsules with agar-agar and hydroxypropyl methylcellulose under different temperature conditions inhibited the decrease in enzyme activity, which in other samples of capsules reached 90% in 6 months of storage. In samples of capsules with carrageenan at temperatures of 4 °C and 30 °C, there was a significant decrease in the activity of the enzyme preparation. Selection of capsule samples from plant polysaccharides suitable for L-phenylalanine-ammonia-lyase replacement therapy is done after studying the mechanisms of capsule destruction under conditions close to the conditions of the gastrointestinal tract, to which the next stage of our research will be devoted.

Evaluation of Lactobacillus plantarum encapsulated with Eleutherine americana oligosaccharide extract as food additive in yoghurt

This study aimed to determine the survival and antibacterial activity of Lactobacillus plantarum TISTR1465 encapsulated with Eleutherine americana oligosaccharide extract. Capsules were stored at 4 °C for 0, 2, and 4 weeks. The encapsulated cells were evaluated for their survival after sequential exposure to simulated gastric and intestinal juices, then evaluated in terms of their antibacterial activity. Survival of the encapsulated cells was higher than that of free cells at weeks 2 and 4. Highest levels of viable cells were observed with encapsulation in E. americana oligosaccharide extract. No surviving free cells were found in week 4. Yoghurt prepared with encapsulated cells showed less acidification than with free cells. Antibacterial activity of L. plantarum TISTR1465 before pH neutralisation against Clostridium perfringens ATCC13124, Staphylococcus aureus ATCC 25923, Escherichia coli ATCC 25922, and Salmonella Typhimurium ATCC13311 was higher than after pH neutralisation. Encapsulation by extrusion enhanced antibacterial activity of the cells against enteropathogenic bacteria. The antibacterial activity of encapsulated cells against Gram-positive bacteria was higher than that against Gram-negative bacteria. Results indicates that L. plantarum TISTR1465 encapsulated with E. americana oligosaccharide extract showed potential for application as a functional food additive.

Preparation and characterization of alginate and gelatin microcapsules containing Lactobacillus rhamnosus

This paper describes the preparation and characterization of alginate beads coated with gelatin and containing Lactobacillus rhamnosus. Capsules were obtained by extrusion method using CaCl2 as cross linker. An experimental design was performed using alginate and gelatin concentrations as the variables investigated, while the response variable was the concentration of viable cells. Beads were characterized in terms of size, morphology, scanning electron microscopy (SEM), moisture content, Fourier Transform Infrared Spectrometry (FTIR), thermal behavior and cell viability during storage. The results showed that the highest concentration of viable cells (4.2 x 109 CFU/g) was obtained for 1 % w/v of alginate and 0.1 % w/v of gelatin. Capsules were predominantly spherical with a rough surface, a narrow size distribution ranging from 1.53 to 1.90 mm and a moisture content of 97.70 ± 0.03 %. Furthermore, FTIR and thermogravimetric analysis indicated an interaction between alginate-gelatin. Cell concentration of alginate/gelatin microcapsules was 105 CFU/g after 4 months of storage at 8 oC.