Antifungal starch-based edible films containing Aloe vera

Fabrication and characterization of talipot starch-based biocomposite film using mucilages from different plant sources: A comparative study

Biocomposite films were prepared by formulating talipot starch with plant mucilage derived from shoeblack leaves, okra, and seeds of basil, fenugreek, and flax, which were identified as SBM-TSF, OKM-TSF, BSM-TSF, FGM-TSF, and FXM-TSF, respectively. The plant mucilages enhanced the crosslinking of the filmogenic solutions, which increased the film's relative crystallinity. Upon topographical investigation, the biocomposite films exhibited the same compact and homogeneous structures as the native talipot starch film (NTSF), but with finer corrugations. When compared to NTSF, the addition of plant mucilage decreased the moisture content while increasing the thickness and opacity. SBM-TSF showed significantly reduced (p ≤ 0.05) solubility and water vapor permeability, indicating that increased crosslink formation in the film obstructed the water vapor passage. Among all the biocomposite films, the BSM-TSF had the greatest tensile strength, making it more resistant to stretching. Among the studied biocomposite films, SBM-TSF and BSM-TSF demonstrated improved thermal and biodegradation stability.

Recent advances in starch-based coatings for the postharvest preservation of fruits and vegetables

Efficient and low-cost postharvest preservation of fruits and vegetables has always been one of the urgent problems to be solved in the food field. Due to the wide sources, good environmental and human safety, and high biodegradability, starch-based coating preservation method has great application prospects in the postharvest preservation of fruits and vegetables. However, starch materials also have the disadvantages of poor mechanical properties and easy water absorption performance, which makes it difficult to fully meet the requirements in practical production. Therefore, starch is often used in combination with other components to form composite materials. This paper began with an introduction to the preservation principles of edible starch-based coatings, including inherent properties and extra functional properties. Besides, the preservation principles of edible coatings and the recent advances in the field of fruit and vegetable preservation were also comprehensively reviewed, focusing on the preparation and application of starch-based coatings. The information will contribute to the further development of starch-based coatings to improve the postharvest preservation effect of fruits and vegetables.

Tissue succulence in plants: Carrying water for climate change

Tissue succulence in plants involves the storage of water in one or more organs or tissues to assist in maintaining water potentials on daily or seasonal time scales. This drought-avoidance or drought-resistance strategy allows plants to occupy diverse environments including arid regions, regions with rocky soils, epiphytic habitats, and saline soils. Climate-resilient strategies are of increasing interest in the context of the global climate crisis, which is leading to hotter and drier conditions in many regions throughout the globe. Here, we describe a short history of succulent plants, the basic concepts of tissue succulence, the anatomical diversity of succulent morphologies and associated adaptive traits, the evolutionary, phylogenetic, and biogeographical diversity of succulent plants, extinction risks to succulents due to poaching from their natural environments, and the myriad uses and applications of economically important succulent species and the products derived from them. Lastly, we discuss current prospects for engineering tissue succulence to improve salinity and drought tolerance in crops.

Composite films of sodium alginate and konjac glucomannan incorporated with tea polyphenols for food preservation

At present, food waste has become a serious issue and the use of petroleum-based food packaging films has resulted in a series of potential hazards. Therefore, more attention has been focused on the development of new food packaging materials. The polysaccharide-based composite film loaded with active substances considered to be an excellent preservative material. A novel packaging film based on sodium alginate and konjac glucomannan (SA-KGM) blended with tea polyphenols (TP) was prepared in the present study. The excellent microstructure of films was shown by atomic force microscopy (AFM). It was indicated by FTIR spectra that the components could interact with each other through hydrogen bonds, which was also confirmed by molecular docking simulation. Meanwhile, the mechanical properties, barrier property, oxidation property, antibacterial activity, and stability of the structure of the TP-SA-KGM film were significantly improved. The AFM images and results of molecular docking simulation indicated that TP could affect the cell wall of bacteria by acting with peptidoglycan. Finally, the film showed excellent preservation effects in both beef and apples, which suggested that TP-SA-KGM film could be a novel bioactive packaging material with wide application potential in food preservation.

Recent advances of antibacterial starch-based materials

Starch has attracted a lot of attention because it is biodegradable, renewable, nontoxic and low cost. By adding antibacterial substances to starch, starch-based materials have antibacterial properties. The composite with other materials can improve the comprehensive performance of starch-based materials, thus broadening the application field of the material. In this paper, we focus on antibacterial starch-based materials and review their preparation and applications. It was found that antibacterial starch-based materials were most widely used in packaging, followed by medicine, and the research on smart starch-based materials was relatively less. This review may provide some reference value for subsequent studies of starch-based materials.

Production of Thermoplastic Starch-Aloe vera Gel Film with High Tensile Strength and Improved Water Solubility

Biodegradable film packaging made from thermoplastic starch (TPS) has low mechanical performance and high water solubility, which is incomparable with synthetic films. In this work, Aloe vera (AV) gel and plasticized soluble potato starch were utilised to improve the mechanical stability and water solubility of TPS. Dried starch was mixed with glycerol and different AV gel concentrations (0% to 50%). The TPS + 50% AV gel (30 g TPS + 15 g AV gel) showed the best improvement compared to TPS alone. When compared to similar TPS films with AV gel added, this film is stronger and dissolves better in water. Mechanical qualities improved the tensile strength and Young's modulus of the TPS film, with 1.03 MPa to 9.14 MPa and 51.92 MPa to 769.00 MPa, respectively. This was supported by the improvement of TPS water solubility from 57.44% to 46.6% and also by the increase in decomposition temperature of the TPS. This promises better heat resistance. The crystallinity percentage increase to 24.26% suggested that the formation of hydrogen bonding between TPS and AV gel enhanced crosslinking in the polymeric structure. By adding AV gel, the TPS polymeric structure is improved and can be used as a biodegradable food-packaging film.

Influence of corn starch based bio-active edible coating containing fumaric acid on the lipid quality and microbial shelf life of silver pomfret fish steaks stored at 4 °C

The present study aimed at assessing the impact of addition of fumaric acid (0.5%), as an active agent, in a corn starch (2%) based edible coating, on the lipid quality and microbial shelf life of silver pomfret (Pampus argenteus) fish steaks stored at 4 °C. Treating fish steaks with FA resulted in a bacteriostatic effect leading to reduced counts of total mesophilic and psychrotrophic bacteria, H2S producing bacteria and Pseudomonas spp. The total mesophilic bacterial count of uncoated control sample exceeded the permissible limit of 7 log cfu g-1 on 6th day and had the lowest microbial shelf life. FA incorporation in the CS coating improved the microbial stability of fish steaks resulting in a shelf life of 15 days. The outcomes of the study suggest that CS based coating is beneficial in delaying lipid oxidation as displayed by the lower TBA and PV values while FA is an effective agent for further increasing the preservative action of CS coating by significantly inhibiting microbial growth as well as lipid quality deterioration, which could be exploited by the seafood industry as an active packaging component.

Development of Aloe Vera-Green Banana Saba-Curcumin Composite Film for Colorimetric Detection of Ferrum (II)

This study was performed to develop and characterize a bio-film composed of Aloe vera (Aloe barbadensis), green banana Saba (Musa acuminata x balbisiana), and curcumin for the detection of Fe²⁺ ions. Cross-linking interaction between banana starch-aloe vera gel and banana starch-curcumin enhanced l the sensing performance of the composite film towards divalent metal ions of Fe²⁺. The morphological structure of the Aloe vera-banana starch-curcumin composite revealed a smooth and compact surface without cracks and some heterogeneity when observed under Scanning Electron Microscopy (SEM). The thickness, density, color property, opacity, biodegradation, moisture content, water-solubility, water absorption, swelling degree, and water vapor permeability of bio-films were measured. The incorporation of aloe vera gel and curcumin particles onto the banana starch film has successfully improved the film properties. The formation of the curcumin-ferrum (II) complex has triggered the film to transform color from yellow to greenish-brown after interaction with Fe²⁺ ions that exhibit an accuracy of 101.11% within a swift reaction time. Good linearity (R² = 0.9845) of response on colorimetric analysis was also obtained in Fe²⁺ ions concentration that ranges from 0 to 100 ppm, with a limit of detection and quantification found at 27.84 ppm and 92.81 ppm, respectively. In this context, the film was highly selective towards Fe²⁺ ions because no changes of color occur through naked eye observation when films interact with other metal ions, including Fe³⁺, Pb²⁺, Ni²⁺, Cd²⁺, and Cu^2+. Thus, these findings encourage curcumin-based starch films as sensing materials to detect Fe²⁺ ions in the field of food and agriculture.

Thermo-/pH-responsive preservative delivery based on TEMPO cellulose nanofiber/cationic copolymer hydrogel film in fruit packaging

Hydrogels have great potential in food packaging. However, stimuli-responsive preservative delivery-based hydrogels for emerging active packaging have not yet been explored. Herein, Unprecedented pH/temperature-responsive hydrogel films for emerging active climacteric fruit packaging were developed based on TEMPO-oxidized nanofibrillated cellulose (TOCNFs) from wheat straw with food-grade cationic-modified poly(N-isopropyl acrylamide-co-acrylamide) (CP_NIPAM-AM). TOCNF incorporation into CP_NIPAM-AM revealed desirable enhancement of characterization, antimicrobial properties, and pH/thermal-responsive behaviour. In-vitro delivery and release mechanism studies with natamycin revealed the fastest release rates in preferred low pH media, up to 32.1 times higher than that under neutral conditions via anomalous diffusion. Applying a thermal stimulus increased natamycin release rates, providing 1.5-21% gradual-additional pulses by Fickian diffusion. The final hydrogel film showed efficient decay control in response to stimuli of the climacteric fruit environment with safe, recyclable, and feasible application demonstrating the significant potential to be used as an alternative-sustainable material for stimuli-triggered preservative delivery in climacteric fruit packaging.

Aloe Vera Gel Edible Coating for Shelf Life and Antioxidant Proprieties Preservation of Andean Blackberry

Andean blackberry is cultivated in Colombia due to its national and international commercial importance, in addition to its flavour and high nutritional value. Due to its physicochemical, morphological, and physiological characteristics, it constitutes one of the most unstable fruits in the Colombian fruit and vegetable supply chain, thereby generating economic losses. In this study, a polymer-based coating of Aloe vera and essential oil was designed, and its influence on the shelf life of Andean blackberry stored at 4 °C was studied. Once the appropriate composition was established according to the experimental design, Andean blackberries’ physicochemical parameters, the content of total phenols, and antioxidant activity were monitored over 19 days. The total soluble solids present a change between 5.2 and 5.6° Brix and 5.2 and 7.2° Brix for coated and uncoated fruits between 1 and 19 days, respectively. The coated fruits presented a lower loss compared to the uncoated fruits and the total phenol content presented a higher concentration on day 19 in the coated fruits (412.71 ± 37.5 mg Gallic Acid Equivalents L−1 sample). The coating enabled an increase in the shelf life of the blackberries, from 4 to 19 days, while preserving the physicochemical properties of the fruits. Therefore, the application of coating as a method for the post-harvest preservation of Andean blackberries represents a low-cost, easily available strategy.

A comprehensive overview of functional and rheological properties of aloe vera and its application in foods

Aloe vera catches attention of food industry due to its various health benefits like emollient, anti-inflammatory, purgative, anti-microbial, aphrodisiac, antifungal, and antioxidant. Aloe vera gel has excellent functional and nutritional properties and its incorporation into food can increase its functional and nutritional value of the food. However, both the pulp and aloe gel contain a lot of insoluble polymer particles, which affect the rheological behaviour and physical stability mechanisms of the suspensions during storage and processing. While many researchers have explored the application of aloe vera juice in the food products, no literature review of food applications of aloe vera along with their rheological properties have been complied. Hence, the present review aimed to focus on the utilization of aloe vera in the various sectors of food processing and gives insights on the rheological and flow behaviour of aloe vera juice which is a critical parameter for its food application.

Effect of a multifunctional edible coating based on cassava starch on the shelf life of Andean blackberry

The blackberry is a fragile fruit with a high degree of decomposition, which limits its shelf life. The effect of an edible coating (EC) based on cassava starch, whey protein, beeswax, chitosan, glycerol, stearic acid, and glacial acetic acid on the shelf life of fruit stored at 4 °C was evaluated. The physical, chemical, physical, microbiological, and sensorial quality was evaluated, comparing with a fresh control fruit. The EC had a positive effect on the physicochemical and sensorial properties (mainly in texture, flavor, and aromas), due to the reduction of physiological processes, whereas the color changes are mainly due to anthocyanin losses. After 10 days of storage, weight losses were 39.6% lower and firmness was 81.4% higher; while chitosan reduced the mold and yeast count. The EC increased the useful life of the Andean blackberries by 100%.

Chemical Constituents, Antimicrobial Activity, and Food Preservative Characteristics of Aloe vera Gel

Edible coating gels developed from the Aloe vera plant have been used as a traditional medicine for about 3000 years. Aloe vera contains approximately 110 potentially active constituents from six different classes: chromone and its glycoside derivatives; anthraquinone and its glycoside derivatives; flavonoids; phenylpropanoids and coumarins; phenylpyrone and phenol derivatives; and phytosterols and others. Apart from medicinal uses, Aloe gels have an important role in food preservation as edible coatings. They provide an edible barrier for atmospheric gases and moisture and help to reduce the respiration and transpiration of fresh produce, which helps to preserve its postharvest quality. To date, numerous studies have been conducted on the postharvest use of Aloe vera gel. The present review article summarizes and discusses existing available information about the chemical constituents, antimicrobial activity, and food preservative characteristics of Aloe vera.

Characterization of compisote edible films from aloe vera gel, beeswax and chitosan

Environmental consciousness as well as individual’s demand for ready to eat food, recently, has changed the trends in food packaging leading to the development of biodegradable and edible packaging. Emulsified edible films have better transparency, superior mechanical properties and provide barriers to water and other atmospheric gases. Edible films if not consumed, biodegrad chemically. In present study, edible films were, initially, prepared using Chitosan and Aloe vera at different concentrations. Films were then subjected to physical and mechanical testing. Films with 20% Aloe vera had low thickness as compared to films with no Aloe vera. These films also had superior mechanical properties and lower water vapor permeability. Films with 20% Aloe vera were, then, selected and beeswax was dispersed in Chitosan-Aloe vera solution at concentration upto 2.0% followed by film preparation through casting technique. Thickness and water vapor permeability were observed to be improved with increase in concentration of beeswax. Tensile strength of edible films was also improved 1.3 times when concentration of beeswax increased from 0.5 to 2.0%. Percentage elongation decreased with increase in beeswax concentration in the emulsified films. No change in particle size was observed with change in concentration of beeswax. Emulsions were also stable at room temperatures. Decrease in transparency of emulsified edible films was observed with increase in beeswax content in the emulsified films. In addition, cost analysis of the films proved them reasonable to be used as an alternate of synthetic packaging materials.

Mechanical properties and antibacterial activities of novel starch-based composite films incorporated with salicylic acid

To control food contamination and meet the growing demand for high quality food, a novel and excellent starch composite film as packing material with optimized physical, mechanical properties and antimicrobial activity was produced in this paper. Starch-based composite films incorporated with salicylic acid (SA) and waxy maize starch nanoparticles/κ-carrageenan (WMSNs/KC) were used to achieve antimicrobial activity and improve the mechanical properties. WMSNs were fabricated through enzymolysis and recrystallisation method, followed by individually adding KC to form WMSNs/KC by self-assembly, and used as a nanofiller and stabilizer to be incorporated into hydroxypropyl tapioca starch-based films at a concentration of 0-9%. Characterization of macromorphology and scanning electron microscope indicated the starch composite films with WMSNs/KC were smooth, uniform, and transparent. X-ray diffraction pattern and Thermogravimetric analysis also showed strong interactions such as hydrogen bond formation among films, WMSNs/KC and SA. Compared with the pure starch-based films, the composite films reinforced by the addition of WMSNs/KC significantly increased the tensile strength, water vapor barrier and thermal stability, while the transparency and elongation at break decreased slightly. Moreover, the starch composite films showed excellent antimicrobial activity for three typical undesired microorganisms in foods, Escherichia coli, Staphylococcus aureus, and Bacillus subtilis.

Structural, Physical, and Antifungal Characterization of Starch Edible Films Added with Nanocomposites and Mexican Oregano (Lippia berlandieri Schauer) Essential Oil

The aim of this study was to evaluate the structural, physical, and antifungal characteristics of starch edible films added with nanocomposites and Mexican oregano (Lippia berlandieri Schauer) essential oil (EO). Starch edible films were formulated with Mexican oregano EO (0%, 1%, or 2% v/v) and bentonite or halloysite (2%). Physical properties such as L* (luminosity), hue, film thickness, and O₂ and CO₂ permeability were determined. Structural analysis was carried out via atomic force microscopy (AFM). Antifungal activity against Aspergillus niger, Fusarium spp., and Rhizopus spp. was evaluated. The addition of EO and nanocomposites reduced luminosity, providing color to the edible films. Film thickness increased through the addition of EO concentration. O₂ and CO₂ permeability was increased by bentonite/EO films, and for halloysite films, CO₂ permeability decreased as EO concentration increased. The addition of EO with both nanocomposites shows an evident morphological change in film structure, decreasing pore density and increasing pore size. In general, Mexican oregano EO added to edible starch films has an adequate fungicidal effect. The most sensitive microorganism tested was A. niger. Edible films added with Mexican oregano EO and nanocomposites show better physical and antifungal properties due to an adequate structural change in the biopolymer matrix.

Aloe Genus Plants: From Farm to Food Applications and Phytopharmacotherapy

Aloe genus plants, distributed in Old World, are widely known and have been used for centuries as topical and oral therapeutic agents due to their health, beauty, medicinal, and skin care properties. Among the well-investigated Aloe species are A. arborescens, A. barbadensis, A. ferox, and A. vera. Today, they account among the most economically important medicinal plants and are commonly used in primary health treatment, where they play a pivotal role in the treatment of various types of diseases via the modulation of biochemical and molecular pathways, besides being a rich source of valuable phytochemicals. In the present review, we summarized the recent advances in botany, phytochemical composition, ethnobotanical uses, food preservation, and the preclinical and clinical efficacy of Aloe plants. These data will be helpful to provide future directions for the industrial and medicinal use of Aloe plants.

Starch-Based Coatings for Preservation of Fruits and Vegetables

Considerable research has focused on the control of the physiological activity of fruits and vegetables in postharvest conditions as well as microbial decay. The use of edible coatings (ECs) carrying active compounds (e.g., antimicrobials) represents an alternative preservation technology since they can modify the internal gas composition by creating a modified atmosphere through the regulation of the gas exchange (oxygen, carbon dioxide, volatiles) while also limiting water transfer. Of the edible polymers able to form coating films, starch exhibits several advantages, such as its ready availability, low cost and good filmogenic capacity, forming colourless and tasteless films with high oxygen barrier capacity. Nevertheless, starch films are highly water sensitive and exhibit limited water vapour barrier properties and mechanical resistance. Different compounds, such as plasticizers, surfactants, lipids or other polymers, have been incorporated to improve the functional properties of starch-based films/coatings. This paper reviews the starch-based ECs used to preserve the main properties of fruits and vegetables in postharvest conditions as well as the different factors affecting the coating efficiency, such as surface properties or incorporation of antifungal compounds. The great variability in the plant products requires specific studies to optimize the formulation of coating forming products.