Specific ratio of A-to B-type wheat starch granules improves the quality of gluten-free breads: Optimizing dough viscosity and pickering stabilization

Effects of wheat starch content on its flour and frozen dough bread

The refined wheat flour was mixed with different types of wheat starch in different addition levels, their microstructure, chemical bonds in the dough and baking characteristics of 0-8 weeks frozen dough bread were studied. With the increase of A-Type starch granules and whole wheat starch, the pores of gluten network first decreased and then increased. Conversely, an increase in B-Type starch granules consistently reduced gluten network porosity. With the increase of whole wheat starch, the content of free sulfhydryl group and hydrophobic interaction decreased gradually. Minimal additions of B-Type granules were found to enhance the specific volume of fresh bread, whereas increased quantities improved the specific volume of frozen dough bread. The addition of a small quantity of A- or B-Type granules enhances the freezing stability of bread. This study provides effective information for elucidating the effects of wheat starch on the frozen dough and bread properties in protein-starch matrix.

Moderate regulation of wheat B-starch ratio: Improvement of molecular structure, spatial conformation, aggregation behavior of reconstituted fermented doughs and its processing suitability

Aiming to investigate the changes and effects of different particle sizes of wheat A/B starch during dough fermentation, the present study reconstituted A/B starch fractions in ratios of 100:0, 75:25, 50:50, 25:75, and 0:100, further blended with gluten and subjected to slight (20 min), medium (30 min), and high (60 min) fermentation processes by yeasts. Results showed that fermentation gas production promoted gluten network extension, inducing starch granule exposure and dough surface roughness. Also, fermentation fractured protein intermolecular disulfide bonds and decreased α-helix and β-folded structure content, contributing to GMP, LPP, and SPP content decreases. Moreover, moderately increasing the B-starch ratio in the dough can improve gluten network stability, continuity, and air-holding capacity. The 25A-75B steam bread exhibited optimal processing suitability (better morphology, texture, and quality) due to its higher GMP and polymer protein content with lower free sulfhydryl and monomeric protein content. Further, conformational relationships indicated the key indicators influencing dough products' properties were free sulfhydryl content, GMP content, protein molecular weight distribution, and secondary structure. The obtained findings contributed to understanding the effect of wheat starch granule size distribution on dough processing behavior, and future targeted breeding for wheat cultivars with high B-starch content for improved fermentation pasta product qualities.

Effect of starch granule size on the properties of dough and the oil absorption of fried potato crisps

Starch is a key element in fried potato crisps, however, the effect of starch granule size on oil absorption of the product have yet to be fully investigated. The study explored the impact of starch granule size on both the dough characteristics and oil absorption in potato crisps. The dough composed of small-sized potato granules showed more compact and uniform network system. Additionally, X-ray Microscope analysis showed that potato crisps prepared with small-sized potato granules had limited matrix expansion and fewer pores, cracks, and voids. The small-sized potato and small-sized wheat starches granule addition crisps displayed a significantly greater average cell thickness (52.05 and 53.44 μm) than other samples, while exhibiting notably lower average porosity (61.37 % and 60.28 %) compared to other samples. Results revealed that potato crisps with medium and small potato granules had 12.91 % and 21.92 % lower oil content than those containing large potato starch. Potato crisps with B-type wheat starch showed 16.36 % less oil absorption than those with A-type wheat starch. Small-sized starches significantly influence the dough structure and contribute to the reduction of oil absorption in fried products. The generated insights may provide monitoring indexes for cultivating potato varieties with low oil absorption.

Multiphoton microscopy is a nondestructive label-free approach to investigate the 3D structure of gas cell walls in bread dough

During the different steps of bread-making, changes in the microstructure of the dough, particularly in the gas cell walls (GCW), have a major influence on the final bread crumb texture. Investigation of the spatial conformation of GCWs is still a challenge because it requires both high resolutions and 3D depth imaging. The originality of the present work lies in the use of label-free non-destructive multiphoton microscopy (NLOM) to image the 3D structure of GCWs, shedding light on their behavior and organization in wheat bread dough. We demonstrated that second and third harmonic generation (SHG, THG) allow imaging, respectively, of starch granules and interfaces in bread dough, while the gluten matrix was detected via two-photon excitation fluorescence (TPEF). Last, a distinction between the gluten network and starch granules was achieved using gluten endogenous fluorescence (EF) imaging, while the position, size, and 3D orientation of starch granules in GCWs were determined from harmonic imaging, made possible by the acquisition of backward and forward SHG with linear polarization. These innovative experiments highlight the strengths of NLOM for a label-free characterization of bread dough microstructure for the first time, in order to understand the role of starch granules in dough stabilization.

Starch granules and their size distribution in wheat: Biosynthesis, physicochemical properties and their effect on flour-based food systems

Starch is a vital component of wheat grain and flour, characterized by two distinct granule types: A-type starch (AS) with granules larger than 10 µm in diameter, and B-type starch (BS) with granules measuring no more than 10 µm in diameter. This review comprehensively evaluates the isolation, purification, and biosynthesis processes of these types of granules. In addition, a comparative analysis of the structure and properties of AS and BS is presented, encompassing chemical composition, molecular, crystalline and morphological structures, gelatinization, pasting and digestive properties. The variation in size distribution of granules leads to differences in physicochemical properties of starch, influencing the formation of polymeric proteins, secondary and micro-structures of gluten, chemical and physical interactions between gluten and starch, and water absorption and water status in dough system. Thus, starch size distribution affects the quality of dough and final products. In this review, we summarize the up-to-date knowledge of AS and BS, and propose the possible strategies to enhance wheat yield and quality through coordinated breeding efforts. This review serves as a valuable reference for future advancements in wheat breeding.

Wheat starch particle size distribution regulates the dynamic transition behavior of gluten at different stages of dough mixing

This study investigated the morphology distribution, molecular structure, and aggregative properties variation of gluten protein during dough mixing stage and interpreted the interaction between starch with different sizes and protein. Research results indicated that mixing process induced glutenin macropolymer depolymerization, and promoted the monomeric protein conversion into the polymeric protein. Appropriate mixing (9 min) enhanced the interaction between wheat starch with different particle sizes and gluten protein. Confocal laser scanning microscopy images showed that a moderate increase in B-starch content in the dough system contributed to forming a more continuous, dense, and ordered gluten network. The 50A-50B and 25A-75B doughs mixed for 9 min exhibited a dense gluten network, and the arrangement of A-/B-starch granules and gluten was tight and ordered. The addition of B-starch increased α-helixes, β-turns, and random coil structure. Farinographic properties indicated that 25A-75B composite flour had the highest dough stability time and the lowest degree of softening. The 25A-75B noodle displayed maximum hardness, cohesiveness, chewiness, and tensile strength. The correlation analysis indicated that starch particle size distribution could influence noodle quality by changing the gluten network. The paper can provide theoretical support for regulating dough characteristics by adjusting the starch granule size distribution.

Superior gluten structure and more small starch granules synergistically confer dough quality for high amylose wheat varieties

High amylose wheat (HAW) has potential health benefits but its dough structure is usually inferior. Wheat dough is a complex mixture and its structure is influenced by the physicochemical properties of gluten and starch. In this study, we investigated the starch granule development, gluten structure, starch properties, pasting, and thermal properties of flour, as well as the rheological properties of dough in wheat variety Xinong 836 with high amylose content (33.57%) and its parents. The results showed that Xinong 836 wheat starch contained more small starch granules, which was consistent with the microstructural results of starch granules in grain filling stage. Moreover, Xinong 836 wheat starch showed highest swelling power and water solubility. Importantly, the flour of Xinong 836 wheat had the highest protein content and wet gluten content and Xinong 836 wheat gluten showed highest β-sheets content and disulfide bond content than its parents Zhengmai 7698 and Xinong 979, which conferring to more compact microscopic networks of dough, thereby contributing to the higher peak viscosity (PV), final viscosity (FV), and setback viscosity (SB) in the flour of Xinong 836. Our finding elucidated that the stability of gluten and properties of starch synergistically affected the pasting and thermal properties of the flour paste, and the presence of more small starch granules contributed to dough with a rather dense structure in HAW Xinong 836. Thus, superior gluten structure and more small starch granules have synergistic effects on enhancing the gluten-starch interaction, thereby contributing to better dough quality.

Effect of Insoluble Dietary Fiber Extracted from Feijoa (Acca sellowiana (O. Berg) Burret.) Supplementation on Physicochemical and Functional Properties of Wheat Bread

This study aimed to assess the effects of insoluble dietary fiber (IDF) from feijoa supplementation on the physicochemical and functional properties of wheat bread. The results showed that feijoa IDF (FJI) had the typical structures of hydrolysis fiber, polysaccharide functional groups, and crystal structure of cellulose. The gradual increase of FJI levels (from 2 to 8%) in wheat bread resulted in increased total DF, ash, and protein contents, accompanied by a reduction in moisture, carbohydrates, and energy value. The inclusion of FJI in the bread crumb caused a rise in both redness (a*) and yellowness (b*) values while decreasing the brightness (L*) relative to the control specimen. In addition, adding FJI up to 2% significantly increased total phenolic and flavonoid contents and antioxidant activity, as well as flavor score of supplemented bread samples, while additions above 2% resulted in undesirable taste and texture. FJI addition caused higher bile acid, NO^2-, and cholesterol adsorption capacities. Moreover, FJI addition up to 4% significantly reduced glucose adsorption capacities at different in vitro starch digestion intervals. The findings revealed that FJI offers great potential as an ideal functional ingredient in food processing.

Starch physical treatment, emulsion formation, stability, and their applications

Pickering emulsions are increasingly preferred over typical surfactant-based emulsions due to several advantages, such as lower emulsifier usage, simplicity, biocompatibility, and safety. These types of emulsions are stabilized using solid particles, which produce a thick layer at the oil-water interface preventing droplets from aggregating. Starch nano-particles (SNPs) have received considerable attention as natural alternatives to synthetic stabilizers due to their unique properties. Physical formulation processes are currently preferred for SNP production since they are environmentally friendly procedures that do not require the use of chemical reagents. This review provides a thorough overview in a critical perspective of the physical processes to produce starch nano-particles used as Pickering emulsion stabilizers, fabricated by a 2-step process. Specifically, the reviewed physical approaches for nano-starch preparation include high hydrostatic pressure, high pressure homogenization, ultrasonication, milling and antisolvent precipitation. All the essential parameters used to evaluate the effectiveness of particles in stabilizing these systems are also presented in detail, including the hydrophobicity, size, and content of starch particles. Finally, this review provides the basis for future research focusing on physical nano-starch production, to ensure the widespread use of these natural stabilizers in the ever-evolving field of food technology.

Dry Heating of Cowpea Flour below Biopolymer Melting Temperatures Improves the Physical Properties of Bread Made from Climate-Resilient Crops

Improving the technological functionality of climate-resilient crops (CRCs) to promote their use in staple foods, such as bread, is relevant to addressing food and nutrition security in Africa. Dry heating of cowpea flour (CPF) was studied as a simple technology to modulate CPF physicochemical properties in relation to bread applications. For this purpose, the melting behavior of cowpea starch and proteins in CPF was first studied and modeled using Flory–Huggins theory for polymer melting. Next, dry-heating conditions were investigated based on the predicted biopolymer melting transitions in CPF to be well below starch and protein melting. The pasting properties (i.e., peak viscosity, final viscosity, breakdown and setback) of CPF could be selectively modulated depending on temperature-time combinations without altering the thermal behavior (i.e., melting enthalpies) of CPF. Water-binding capacity and soluble solids decreased with the increased severity of the temperature-time combinations. Dry-heated CPF added to CRC-based bread significantly improved crumb texture. In particular, dry heating at 100 °C for 2 h provided bread with the highest crumb softness, cohesiveness and resilience. The positive effects on the crumb texture could be largely related to enhanced starch integrity, as indicated by a reduction in breakdown viscosity after treatment. Overall, dry heating of CPF under defined conditions is a promising technology for promoting the use of CPF as a techno-functional and protein-rich ingredient in bread-type products.

Rheological, microstructure and mixing behaviors of frozen dough reconstituted by wheat starch and gluten

The effects of starch and gluten on the physicochemical properties of frozen dough were studied using reconstituted flour. The profiles of frozen dough were studied by Mixolab, rheometer, scanning electron microscopy (SEM), confocal laser scanning microscopy (CLSM), differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). Results revealed that starch, rather than gluten, played a decisive role in mixing properties. The breakdown and aggregation of the gluten network structure as well as the formation of β-turns and β-sheets in the frozen dough would be aggravated by the freezing of wheat starch. Smaller wheat starch granules (B-Type granules) affected the secondary structure of gluten network more than larger granules (A-Type granules), resulting in greater rheological property changes. The viscoelastic properties and freezable water content of frozen dough were more influenced by the freezing of gluten.

Gluten-free bakery products: Ingredients and processes

There is an increasing demand for gluten-free products around the world because certain groups of people, which have increased in the last decades, need to eliminate gluten from their diet. A growing number of people consider gluten-free products to be healthier. However, making gluten-free products such as bread is a technological challenge due to the important role of the gluten network in their development. However, other products, such as cakes and cookies usually made with wheat flour, can easily be made with gluten-free starches or flours since gluten does not play an essential role in their production. To replace wheat flour in these elaborations it is necessary to resort to gluten-free starches and/or flours and to gluten substitutes. Additionally, it can be convenient to incorporate other ingredients such as proteins, fibers, sugars or oils, as well as to modify their quantities in wheat flour formulations. Regarding gluten-free flours, it will also be necessary to know the parameters that influence their functionality in order to obtain regular products. These problems have originated a lower availability of gluten-free products which have a worse texture and are less tasty and more expensive than their homologues with gluten. These problems have been partially solved thanks to research on these types of products, their ingredients and their production methods. In recent years, studies about the nutritional improvement of these products have increased. This chapter delves into the main ingredients used in the production of gluten-free products, the processes for making gluten-free breads, cakes and cookies, and the nutritional quality of these products.

Effects of Quinoa Flour on Wheat Dough Quality, Baking Quality, and in vitro Starch Digestibility of the Crispy Biscuits

Quinoa is a pseudo-cereal which has excellent nutritional and functional properties due to its high content of nutrients, such as polyphenols and flavonoids, and therefore quinoa serves as an excellent supplement to make healthy and functional foods. The present study was aimed to evaluate the quality characteristics of wheat doughs and crispy biscuits supplemented with different amount of quinoa flour. The results showed that when more wheat flour was substituted by quinoa flour, proportion of unextractable polymeric protein to the total polymeric protein (UPP%) of the reconstituted doughs decreased and the gluten network structure was destroyed at a certain substitution level. The content of B-type starch and the gelatinization temperature of the reconstituted flours increased. The storage modulus, loss modulus, development time, and stability time of the dough increased as well. Moreover, hardness and toughness of the formulated crispy biscuits significantly decreased. Analyses suggested that starch digestibility was reduced and resistant starch content increased significantly. Taken together, quinoa flour improved dough rheological properties, enhanced the textural properties, and increased resistant starch content in crispy biscuits, thus adding to high nutritional value.

Clean-label techno-functional ingredients for baking products - a review

The increased awareness of consumers regarding unfamiliar labels speeded up the ongoing clean label trend. As baking products are widely consumed worldwide, the reduction of non-natural baking aids and improvers is of great interest for consumer's health but also representing a big challenge for food industries. Thus, this paper aims at describing new techno-functional clean label ingredients for baked products and their production processes conditions. Firstly, it includes ingredients such as sustainable protein sources, fat replacers and leavening alternatives. Then, it addresses new process alternatives for producing baking ingredients with natural claim as well as current concepts as the natural fermentation. In particular, molecular and functional modifications of the flour are discussed regarding malting and dry heat treatments. By being considered as green and emerging technologies that improve flour functionality, the resulting ingredients can replace additives. Changes in quality and technological attributes of breads and cakes will be discussed as a consequence of the partial to total replacement of conventional ingredients. This paper provides new alternatives for the baking industry to meet the demand of a growing health-concerned population. In addition, it focused on opening up new possibilities for the food industry to go in line with the consumers' expectations.

Interaction of B-type starch with gluten skeleton improves wheat dough mixing properties by stabilizing gluten micro-structure

Some recent studies have revealed individual and the combined interactions of gluten and starch affecting dough mixing properties. However, the combined influence of high-molecular-weight glutenin subunits (HMW-GS) and starch on dough mixing and rheological properties requires elucidation. Thus four recombinant inbred lines, SS 1, SS 2, ZZ 1 and ZZ 2, were selected based on their HMW-GSs compositions. Compared to ZZ 1 and ZZ 2, both SS 1 and SS 2 carried superior HMW-GS alleles, and exhibited extended dough development and stability time, indicating their significant dough mixing characteristics. The gluten skeleton of the wheat lines SS 2 and ZZ 2 with higher B-type starch proportions exhibited fewer breakages along with the rise of dough temperature during mixing. Higher content of B-type starch strengthens interaction between starch and gluten skeleton at the dough heating stage, suggesting a specific range of B-type starch proportion can improve dough mixing characteristics.

Normal rice flours perform better in gluten-free bread than glutinous rice flours

This study aims to determine gluten-free bread-making potential of different types of rice, particularly comparing normal rice versus glutinous rice flours. Proximate and chemical compositions, hydration, and dough mixing and pasting properties of ten rice cultivars (i.e., seven types of normal rice and three types of glutinous rice), and quality parameters (specific volume, texture profile, and crumb structure) of gluten-free bread from these flours were assessed. Significant differences were observed in flour properties among different types of rice. Significant correlations were observed between bread specific volume and rice amylose content (r = 0.91, p < 0.01), as well as pasting peak time (r = 0.86, p < 0.01) and final viscosity (r = 0.77, p < 0.01). Further, strong correlations were observed between bread resilience and properties of rice flour, such as amylose content (r = 0.91, p < 0.01), pasting peak viscosity (r = 0.83, p < 0.01), and final viscosity (r = 0.93, p < 0.01). In conclusion, the normal rice types exhibited much better gluten-free bread-making performances than glutinous flour. Important parameters of rice flour determining its gluten-free bread-making properties include amylose content, water retention capacity, and pasting properties. PRACTICAL APPLICATION: Compared with glutenous rice flour, normal rice flour leads to more viscous paste and gluten-free breads with larger volume, evener texture, and better resilience. This study provides guidance for practical uses of rice flours in improving gluten-free dough and bread quality.

Rheological behaviors and physicochemical changes of doughs reconstituted from potato starch with different sizes and gluten

The effects of different sizes of potato starch on the rheological and physiochemical properties of model doughs were investigated. Compared with those of model dough prepared from original starch, the strengths of model doughs prepared from fractionated starch were higher, which indicates that fractionated starch can positively influence the properties of doughs. Additionally, the model dough prepared using large size starch granules had higher storage modulus (G'), loss modulus (G''), and composite modulus (|G*|) values compared to those of other types of dough; it also had the highest elasticity, viscosity, and strength. This might be related to its high amylose content (20.28 ± 0.69%) and high 1045 cm^-1/1022 cm^-1 ratio (1.27 ± 0.17). The model dough (S) prepared from starch with small sizes had the highest contents of disulfide bonds (2.91 μmolg^-1), β-turn (33.92 ± 1.17%), and β-sheet (22.57 ± 0.54%); and it also had better network structure and dough stability. Thus, the stability of the S model dough was affected by phosphorus (1194.57 ± 25.32 ppm) and amylopectin (84.19 ± 1.88%) content, and, moreover, by the competition for water. Stability and network structure of dough are relative to the size distribution of starch granules. Finally, a schematic model showing the mechanism of the influence of phosphorus, sulfhydryl, and disulfide bonds in fractionated starch on the rheological properties of dough was developed.

Interaction between A-type/B-type starch granules and gluten in dough during mixing

To explore the interaction between A/B starch and gluten, the rheological and structural properties of starch-gluten dough with varied A/B starch ratios during mixing were investigated. The G' and G″ values of under- and overdeveloped dough with an A/B starch ratio of 5:5 were higher than those of dough with other ratios and decreased as the A/B starch ratio increased in optimized dough. B starch enhanced extension resistance and dough firmness. Small B starch granules promoted continuous gluten network formation, while large A starch granules readily separate from the gluten network. B starch promoted GMP polymerization. Covalent bonds were the main force involved in A starch-gluten interactions. Hydrophobic interactions were the main force in the under- to optimum-mixing stages, whereas hydrogen and covalent bonds were involved in B starch-gluten interactions from the optimum- to over-mixing stages. A model describing the interactions between gluten and starch components was proposed.

Effects of thermal properties and behavior of wheat starch and gluten on their interaction: A review

Starch and gluten, the most important macromolecules in wheat flour, vary in thermal properties. The thermal behavior of starch, gluten and their complexes during the manufacture and quality control of flour products need to be accurately understood. However, the high complexity of starch-gluten systems impedes the accurate description of their interactions. When heated within varying temperature ranges and when water molecules are involved, the behaviors of amylose and amylopectin change, and the properties of the starch are modified. Moreover, important indicators of starch granules such as gelatinization temperature, peak viscosity, and so on, which are encapsulated by the gluten matrix, are altered. Meanwhile, the high-temperature environment induces the opening of the intrachain disulfide bonds of gliadin, leading to an increase in the probability of interchain disulfide bond formation in the gluten network system. These behaviors are notable and may provide insights into this complex interaction. In this review, the relationship between the thermal behavior of wheat starch and gluten and the quality of flour products is analyzed. Several methods used to investigate the thermal characteristics of wheat and its flour products are summarized, and some thermal interaction models of starch and gluten are proposed.

Banana starch and molecular shear fragmentation dramatically increase structurally driven slowly digestible starch in fully gelatinized bread crumb

The role of native (NB) and extruded (EB) banana starch, and a 1:1 native:extruded banana starch composite (MB), in slowing down the starch digestibility of bread crumb and crust was investigated. During extrusion, the molecular weight of banana starch was reduced from 2.75 × 10⁸ to 4.48 × 10⁶ g/mol (HPSEC-MALS-RI). Results showed a slowly digestible starch (SDS) increase from 1.09% (control) to 4.2, 6.6, and 7.76% in NB, MB and EB crumbs (fully gelatinized), respectively. DSC data attributed this occurrence to the formation of supramolecular structures upon storage involving amylopectin branches (especially those from fragmented amylopectin in EB). The hedonic sensory test showed no differences in overall liking between MB, EB and control, validating feasibility of including banana in the formulation. For the first time, this study shows a molecular size reduction as a strategy to manufacture selected starches that result in highly gelatinized baked products rich in structurally driven SDS.