Formulation and characterization of chitosan hydrochloride and carboxymethyl chitosan encapsulated quercetin nanoparticles for controlled applications in foods system and simulated gastrointestinal condition

Influence of chitosan-capped quercetin nanoparticles on chitosan/poly(vinyl) alcohol multifunctional films: A sustainable approach for bread preservation

Food packaging industries are growing to meet consumer demand and prevent pollution by adopting significant biopolymer advancements. Therefore, this study aimed to develop functionally active chitosan (CS)/polyvinyl alcohol (PVA)-based biopolymer films and evaluate the effect of Justicia Adhatoda extract (JAE), pure quercetin (Q), and CS-capped quercetin nanoparticles ((Q)CS NPs) on sustainable bread packaging. CS was successfully loaded onto (Q) by the one-pot method, which was confirmed by light absorption spectroscopy (UV), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). The fabricated films were examined using different analytical techniques. FTIR and XRD patterns confirmed that the CS/PVA matrix had molecular interactions through hydrogen bonds with JAE, (Q), and (Q)CS NPs. SEM micrograms revealed a uniform distribution and denser surface with small aggregations by adding (Q)CS NPs. The (Q)CS NPs added CPE(Q)CS nanocomposite exhibited excellent UV light shielding (99.99 % UV-A and UV-B blocking), water resistance ability (contact angle:99.44°, WVP:3.68×10-7 gh-1m-1Pa-1), and oxygen (0.614×10-6gh-1 m-1 atm-1) barrier properties. Adding (Q)CS NPs enhanced the antimicrobial properties of CPE(Q)CS against foodborne microbes (E. coli:15.45 mm, P. aeruginosa:14.50 mm, B. subtilis:14.25 mm, S. aureus:13.52 mm, and C. albicans:15.16 mm). In addition, incorporating (Q)CS NPs, increased the shelf life of bread compared to unpacked and polyethylene-packed bread samples.

Curcumin- and quercetin-functionalized polypropylene membranes as active food packaging material

A wide range of active agents, synthetic and natural agents such as essential oils, chitosan and polyphneols consisting of curcumin, gallic acid, anthocyanins, and catechins have been used in order to develop antimicrobial packaging systems, and among them, natural polyphenolic compounds, specially curcumin (Cur) has great potential due to effective biological activities in developing food packaging material. Quercetin (Quer) is also the mostly studied flavonol as a color-changing indicator in the food industry and has been already developed as a realistic alternative for smart and active food packaging. The reason for choosing these two polyphenolic compounds is that they simultaneously possess many beneficial properties such as antioxidant, antibacterial, antiviral, antitumoral, and anti-inflammatory effects. Additionally, the main objective of the study is to combine polypropylene (PP), which is the most preferred and cost-effective polymer in the packaging industry, with these active ingredients, rather than using more expensive polymer types. In this context, PP-Quer or PP-Cur membranes, which are new experiences based on these literatures were chemically characterized by Fourier transform infrared spectroscopy, and the surface morphology of these composite membranes was characterized by scanning electron microscopy. The antibacterial response against gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) bacteria species was investigated. Furthermore, the reactive oxygen species generation and anticancer activity of these composite membranes using human colorectal adenocarcinoma (HT-29) were observed. We proposed that PP-Quer or PP-Cur composite membranes can be a potential candidate as active packaging material in the food industry.

Porous Starch-inulin Loaded Quercetin Microcapsules: Characterization, Antioxidant Activity, in-vitro Release, and Storage Stability

Quercetin (Q) has many potential health benefits, but its low stability limits its use in functional foods and pharmaceuticals. The low stability of quercetin is a challenge that needs to be addressed to fully realize its therapeutic potential. The purpose of this study was therefore to design a proper carrier based on porous starch (PS) and inulin (IN) in order to improve the stability of Q. The scanning electron microscopy (SEM) images denoted that the Q molecules were adsorbed in the PS pores and partially adhered to the surface of the granules. Both types of the wall material could remarkably enhance the protection of Q against thermal and light degradation. The retention index of Q under different environmental conditions was higher for the PS:IN-Q than PS-Q. The results of Fourier transform infrared spectroscopy (FT-IR) revealed that Q interacted with the wall materials through non-covalent bonds. X-ray diffraction (XRD) also confirmed the encapsulation of Q in the wall materials. The bonding between Q and the hydrogen groups of starch compacted the crystalline regions and increased the relative crystallinity in PS-Q and PS:IN-Q. The DPPH and ABTS scavenging activities of the microcapsules containing the PS and IN were higher than those of free Q. Examination of the in-vitro release profile indicated that the Q release rate was lower from the PS:IN-Q microcapsules (21.6%) than from the PS-Q ones (33.7%). Our findings highlight the significant potential of this novel biopolymer mixture (PS/IN) as a promising wall material for the protection and delivery of bioactive compounds.

Chitosan/konjac glucomannan bilayer films: Physical, structural, and thermal properties

To overcome the limitations of chitosan (CS) and konjac glucomannan (KGM), the bilayer films of CS and KGM were prepared by layer-by-layer (LBL) casting method, and the effects of different mass ratios (i.e., C5: K0, C4:K1, C3:K2, C1:K1, C2:K3, C1:K4, and C0:K5) on the microstructures and physicochemical properties of bilayer films were examined to evaluate their applicability in food packaging. The results revealed that the bilayer films had uniform microstructures. When compared with pure films, the bilayer films displayed lower swelling degrees and water vapor permeability. However, the tensile tests revealed a reduction in the mechanical properties of the bilayer films, which was nonetheless superior to that of the pure KGM film. In addition, the intermolecular interactions between the CS and KGM layers were observed through FTIR and XRD analyses. Finally, TGA and DSC analyses demonstrated a decrease in the thermal stability of the bilayer films. Our cumulative results verified that CS-KGM bilayer films may be a promising material for use in food packaging and further properties of the bilayer films can be supplemented in the future through layer-by-layer modification and the addition of active ingredients.

Ultrasound-assisted formation of chitosan-glucose Maillard reaction products to fabricate nanoparticles with enhanced antioxidant activity

The influence of ultrasonic processing parameters including reaction temperature (60, 70 and 80 °C), time (0, 15, 30, 45 and 60 min) and amplitude (70, 85 and 100%) on the formation and antioxidant activity of Maillard reaction products (MRPs) in a solution of chitosan and glucose (1.5 wt% at mass ratio of 1:1) was investigated. Selected chitosan-glucose MRPs were further studied to determine the effects of solution pH on the fabrication of antioxidative nanoparticles by ionic crosslinking with sodium tripolyphosphate. Results from FT-IR analysis, zeta-potential determination and color measurement indicated that chitosan-glucose MRPs with improved antioxidant activity were successfully produced using an ultrasound-assisted process. The highest antioxidant activity of MRPs was observed at the reaction temperature, time and amplitude of 80 °C, 60 min and 70%, respectively, with ∼ 34.5 and ∼20.2 μg Trolox mL^-1 for DPPH scavenging activity and reducing power, respectively. The pH of both MRPs and tripolyphosphate solutions significantly influenced the fabrication and characteristics of the nanoparticles. Using chitosan-glucose MRPs and tripolyphosphate solution at pH 4.0 generated nanoparticles with enhanced antioxidant activity (∼1.6 and ∼ 1.2 μg Trolox mg^-1 for reducing power and DPPH scavenging activity, respectively) with the highest percentage yield (∼59%), intermediate particle size (∼447 nm) and zeta-potential ∼ 19.6 mV. These results present innovative findings for the fabrication of chitosan-based nanoparticles with enhanced antioxidant activity by pre-conjugation with glucose via the Maillard reaction aided by ultrasonic processing.

Protein-polysaccharides based nanoparticles for loading with Malus baccata polyphenols and their digestibility in vitro

The poor solubility, instability and low absorption rate obstruct the bioavailability of polyphenols isolated from Malus baccata (MBP) during gastrointestinal digestion. In order to solve the limitable problems, the food-grade nanoparticles were fabricated by mucin (MC) and Hohenbuehelia serotina polysaccharides (HSP) for delivery of MBP (MBP-NPs). The physicochemical properties and morphology of MBP-NPs prepared by different condition were respectively characterized. During gastrointestinal digestion in vitro, the release characteristic and variation in phenolic composition of MBP-NPs were evaluated. The results showed that MBP-NPs formed by hydrogen bonding and hydrophobic interaction possessed the regularly spherical shapes and smooth surfaces and semi-crystalline properties. Moreover, MBP-NPs presented the excellent physicochemical stability. During simulated gastrointestinal digestion in vitro, MBP-NPs exhibited the sustained release characteristics of phenolic compounds, which were confirmed by SDS-PAGE measurement. Compared with that of unencapsulated MBP, the significant variation was occurred in the phenolic composition of MBP-NPs, indicating that MBP-NPs could prevent the degradation and transformation of phenolic compounds. This study provides a novel strategy to improve the bioavailability of polyphenols.

Micro-/Nano-Carboxymethyl Cellulose as a Promising Biopolymer with Prospects in the Agriculture Sector: A Review

The increase in the population rate has increased the demand for safe and quality food products. However, the current agricultural system faces many challenges in producing vegetables and fruits. Indiscriminate use of pesticides and fertilizers, deficiency of water resources, short shelf life of products postharvest, and nontargeted delivery of agrochemicals are the main challenges. In this regard, carboxymethyl cellulose (CMC) is one of the most promising materials in the agriculture sector for minimizing these challenges due to its mechanical strength, viscosity, wide availability, and edibility properties. CMC also has high water absorbency; therefore, it can be used for water deficiency (as superabsorbent hydrogels). Due to the many hydroxyl groups on its surface, this substance has high efficacy in removing pollutants, such as pesticides and heavy metals. Enriching CMC coatings with additional substances, such as antimicrobial, antibrowning, antioxidant, and antisoftening materials, can provide further novel formulations with unique advantages. In addition, the encapsulation of bioactive materials or pesticides provides a targeted delivery system. This review presents a comprehensive overview of the use of CMC in agriculture and its applications for preserving fruit and vegetable quality, remediating agricultural pollution, preserving water sources, and encapsulating bioactive molecules for targeted delivery.

Recent development in nanoencapsulation and delivery of natural bioactives through chitosan scaffolds for various biological applications

Nowadays, nano/micro-encapsulation as a pioneering technique may significantly improve the bioavailability and durability of Natural bioactives. For this purpose, chitosan as a bioactive cationic natural polysaccharide has been frequently used as a carrier because of its distinct chemical and biological properties, including polycationic nature, biocompatibility, and biodegradability. Moreover, polysaccharide-based nano/micro-formulations are a new and extensive trend in scientific research and development in the disciplines of biomedicine, bioorganic/ medicinal chemistry, pharmaceutics, agrochemistry, and the food industry. It promises a new paradigm in drug delivery systems and nanocarrier formulations. This review aims to summarize current developments in approaches for designing innovative chitosan micro/nano-matrix, with an emphasis on the encapsulation of natural bioactives. The special emphasis led to a detailed integrative scientific achievement of the functionalities and abilities for encapsulating natural bioactives and mechanisms regulated in vitro/in vivo release in various biological/physiological environments.

Recent Advances of Stimuli-Responsive Polysaccharide Hydrogels in Delivery Systems: A Review

Hydrogels obtained from natural polymers have received widespread attention for their excellent biocompatible property, nontoxicity, easy gelation, and functionalization. Polysaccharides can regulate the gut microbiota and improve the intestinal microenvironment, thus exerting the healthy effect of intestinal immunity. In an active substance delivery system, the extent and speed of the substance reaching its target are highly dependent on the carrier. Thus, the smart active substance delivery systems are gradually increasing. The smart polysaccharide-hydrogels possess the ability in response to external stimuli through changing their volume phase and structure, which are applied in various fields. Natural polysaccharide-based hydrogels possess excellent characteristics of environmental friendliness, good biocompatibility, and abundant sources. According to the response type, natural polysaccharide-based hydrogels are usually divided into stimulus-responsive hydrogels, including internal response (pH, temperature, enzyme, redox) and external response (light, electricity, magnetism) hydrogels. The delivery system based on polysaccharides can exert their effects in the gastrointestinal tract. At the same time, polysaccharides may also take part in regulating the brain signals through the microbiota-gut-brain axis. Therefore, natural polysaccharide-hydrogels are considered as promising biomaterials, which can be designed as delivery systems for regulating the gut-brain axis. This article reviews the research advance of stimulus-responsive hydrogels, which focus on the types, response characteristics, and applications for polysaccharide-based smart hydrogels as delivery systems.

Improving Physicochemical Stability of Quercetin-Loaded Hollow Zein Particles with Chitosan/Pectin Complex Coating

Hollow nanoparticles are preferred over solid ones for their high loading capabilities, sustained release and low density. Hollow zein particles are susceptible to aggregation with a slight variation in the ionic strength, pH and temperature of the medium. This study was aimed to fabricate quercetin-loaded hollow zein particles with chitosan and pectin coating to improve their physicochemical stability. Quercetin as a model flavonoid had a loading efficiency and capacity of about 86–94% and 2.22–5.89%, respectively. Infrared and X-ray diffraction investigations revealed the interaction of quercetin with zein and the change in its physical state from crystalline to amorphous upon incorporation in the composite particles. The chitosan/pectin coating improved the stability of quercetin-loaded hollow zein particles against heat treatment, sodium chloride and in a wide range of pH. The complex coating protected quercetin that was encapsulated in hollow zein particles from free radicals in the aqueous medium and enhanced its DPPH radical scavenging ability. The entrapment of quercetin in the particles improved its storage and photochemical stability. The storage stability of entrapped quercetin was enhanced both at 25 and 45 °C in hollow zein particles coated with chitosan and pectin. Therefore, composite hollow zein particles fabricated with a combination of polysaccharides can expand their role in the encapsulation, protection and delivery of bioactive components.

Research progress on polysaccharide/protein hydrogels: Preparation method, functional property and application as delivery systems for bioactive ingredients

Some bioactive ingredients in foods are unstable and easily degraded during processing, storage, transportation and digestion. To enhance the stability and bioavailability, some food hydrogels have been developed to encapsulate these unstable compounds. In this paper, the preparation methods, formation mechanisms, physicochemical and functional properties of some protein hydrogels, polysaccharide hydrogels and protein-polysaccharide composite hydrogels were comprehensively summarized. Since the hydrogels have the ability to control the release and enhance the bioavailability of bioactive ingredients, the encapsulation and release mechanisms of polyphenols, flavonoids, carotenoids, vitamins and probiotics by hydrogels were further discussed. This review will provide a comprehensive reference for the deep application of polysaccharide/protein hydrogels in food industry.

3D-PLA-experimental set up to display the electrical background of the so-called geometric factor of electrokinetic cells

The so-called geometric factor defined in electrokinetic cells, L/S (L being the length and S the cross-section of the channel), is relevant for providing the surface interaction electrical potential (zeta potential, ζ) of large surfaces, such as those used in the design of biomedical devices or water purification systems. Conversely, recent studies demonstrate that this factor is also employed to determine geometrical parameters, such as porosity in membrane-like systems. This factor, which has been attributed exclusively a geometrical character, can also be obtained from the electrical conductivity and resistance of the electrokinetic channel. In this work, we assess whether these two ways of obtaining the L/S factor are equivalent and how possible deviations can affect the value of the zeta potential. For this purpose, we work with channels of different geometries obtained by 3D printing using PLA (polylactic acid) as a polymer employed in biomedical applications. The discrepancies between the L/S factor obtained by electrical and purely geometrical measurements increase as the geometrical L/S factor becomes larger, reaching differences close to 80%. The results show that the so-called geometrical L/S factor also has an important electrical contribution and would be better denoted as electrogeometric factor. The differences found between the L/S factors are also propagated to the calculation of ζ but an optimum conductivity zone (from about 10 to 40 mS m-1) can be defined to obtain the zeta potential by selecting any of the L/S factors obtained from electrokinetic measurements. The results of this work should be taken into account in those investigations that use the L/S factor to obtain the geometry-porosity of permeable materials.

Construction of carboxymethyl konjac glucomannan/chitosan complex nanogels as potential delivery vehicles for curcumin

Construction of nanoscale delivery systems from natural food biopolymer complexes have attracted increasing interests in the fields of food industries. In this study, novel carboxymethyl konjac glucomannan/ chitosan (CMKGM/CS) nanogels with and without 1-ethyl-3-(3-dimethylaminopropyl) /N-hydroxysuccinimide) (EDC/NHS)-initiated crosslinking were prepared. The physicochemical and structural properties of the CMKGM/CS nanogels and their potential to be a delivery vehicle for curcumin were investigated. Compared to original uncrosslinked nanogels, crosslinking did not alter particle size and morphology but decreased zeta potential of nanogels. Fourier transform infrared spectrum confirmed that the amide linkage was formed between CMKGM and CS, which obviously enhanced the stability of crosslinked nanogels under gastrointestinal conditions. Furthermore, the crosslinked nanogels not only had higher encapsulation efficiency of curcumin but also better sustained release behavior under simulated gastrointestinal conditions. These findings suggested that the crosslinked CMKGM/CS nanogels might be a promising delivery system for nutrients.

Antibacterial Films Based on Polylactide with the Addition of Quercetin and Poly(Ethylene Glycol)

A series of new films with antibacterial properties has been obtained by means of solvent casting method. Biodegradable materials including polylactide (PLA), quercetin (Q) acting as an antibacterial compound and polyethylene glycol (PEG) acting as a plasticizer have been used in the process. The effect of quercetin as well as the amount of PEG on the structural, thermal, mechanical and antibacterial properties of the obtained materials has been determined. It was found that an addition of quercetin significantly influences thermal stability. It should be stressed that samples containing the studied flavonoid are characterized by a higher Young modulus and elongation at break than materials consisting only of PLA and PEG. Moreover, the introduction of 1% of quercetin grants antibacterial properties to the new materials. Recorded results showed that the amount of plasticizer did not influence the antibacterial properties; it does, however, cause changes in physicochemical properties of the obtained materials. These results prove that quercetin could be used as an antibacterial compound and simultaneously improve mechanical and thermal properties of polylactide-based films.

A composite chitosan derivative nanoparticle to stabilize a W1/O/W2 emulsion: Preparation and characterization

For preparing stable water-in-oil-in-water emulsion, the role of nanoparticles in stabilizing the interface is very important. In this study, chitosan hydrochloride-carboxymethyl chitosan (CHC-CMC) nanoparticles were prepared considering electrostatic interactions; then the emulsion was prepared and the stability characteristics in presence of NaCl (0-200 mmol/L) and 30 d storage were studied. CHC-CMC nanoparticles (261 nm) were obtained when the CHC: CMC ratio was 1:2. CHC-CMC formation was verified by FT-IR when a new peak appeared at 1580 cm^-1; W₂ contained 2 wt % CHC-CMC and W₁ contained 1 wt % sodium alginate, the creaming index (81.6 %) was higher for the emulsions than Tween 80 (67.4 %) after 30 d. Confocal laser scanning microscopy confirmed the double microstructures, in contrast to the collapse with Tween 80, because the CHC-CMC nanoparticles were densely adsorbing on the oil-water interface. This indicates that CHC-CMC has a stronger ability to stabilize W₁/O/W₂ emulsion than Tween 80.

Morphology and microstructural analysis of bioactive-loaded micro/nanocarriers via microscopy techniques; CLSM/SEM/TEM/AFM

Efficient characterization of the physicochemical attributes of bioactive-loaded micro/nano-vehicles is crucial for the successful product development. The introduction of outstanding science-based strategies and techniques makes it possible to realize how the characteristics of the formulation ingredients affect the structural and (bio)functional properties of the final bioactive-loaded carriers. The important points to be solved, at a microscopic level, are investigating how the features of the formulation ingredients affect the morphology, surface, size, dispersity, as well as the particulate interactions within bioactive-comprising nano/micro-delivery systems. This review presents a detailed description concerning the application of advanced microscopy techniques, i.e., confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and atomic force microscopy (AFM) in characterizing the attributes of nano/microcarriers for the efficient delivery of bioactive compounds. Furthermore, the fundamental principles of these approaches, instrumentation, specific applications, and the strategy to choose the most proper technique for different carriers has been discussed.

Okra polysaccharides/gelatin complex coacervate as pH-responsive and intestine-targeting delivery protects isoquercitin bioactivity

Okra polysaccharides (OPs) belong to RG I pectin branched with neutral saccharide side chains, which possesses distinctive structure and physicochemical properties from the commonly used HG pectin. Until now, the application of RG I pectin as wall material of microcapsule remains unclear. Here, we obtained OPs/gelatin complex coacervate at the maximum yield of 86.8% (pH 3.5, gelatin/OPs ratio 9:1 and 2% (w/v) total polymer concentration) by response surface methodology. Isoquercitin (IQ)-loaded OPs/gelatin complex coacervate (OGIQ) showed porous spongy-like surface structure with average particle size, encapsulation efficiency and surface porosity at 334 nm, 81.6% and 31.9%, respectively. OGIQ was found to be pH-responsive and intestine-targeting. The IQ-release rate of OGIQ was assayed to be 89.4% in intestine fluid and below 2% in acidic and simulated gastric digestion, respectively. Accordingly, embedding in OGIQ protected IQ in digestion and improved its postdigestive α-glucosidase inhibitory rate by 88.7%. The differential scanning calorimetry curves showed that OGIQ effectively prevented IQ from thermal decomposition. The XRD, FT-IR and CD spectra indicated that IQ was embedded in OGIQ in amorphous state by hydrogen bonds and electrostatic interaction. Compared with HG, the neutral saccharide side chains of OPs could induce different secondary conformation change of gelatin during complex coacervation.

Celery cellulose hydrogel as carriers for controlled release of short-chain fatty acid by ultrasound

The feasibility of using celery cellulose hydrogels as carriers was explored for controlled release of short-chain fatty acids (SCFAs) triggered by ultrasound. The hydrogels were prepared with the phase inversion method and further characterized using FT-IR, SEM and XRD techniques. At the optimal cellulose concentration (8.33 and 6.25 mg/mL), the hydrogels (F₄ and F₅) exhibited the swelling ratio of 185%, and Young's modulus of the F₄ and F₅ was lower than that of others. The hydrogels were loaded with SCFAs owing to its hydrophilicity and swelling properties, and the maximum loading capacity of SCFAs achieved nearly 80%. Interestingly, the loaded SCFAs within hydrogel carrier could be readily released if an ultrasound trigger is exerted. Our results indicate that the ultrasound-triggered strategy for the SCFAs delivery system could provide a promising basis to achieve on-demand, reproducible, repeated, and tunable dosing of bioactive molecules.

Nanoemulsions and acidified milk gels as a strategy for improving stability and antioxidant activity of yarrow phenolic compounds after gastrointestinal digestion

The aim of this study was to improve the stability and antioxidant activity of yarrow phenolic compounds upon an in vitro simulated gastrointestinal digestion. Therefore, two types of caseins-based delivery systems, sodium caseinate stabilized nanoemulsions (NEs) and glucono delta-lactone acidified milk gels (MGs), were formulated containing an ultrasound-assisted yarrow extract (YE) at two concentrations (1 and 2.5 mg/mL). Formulations with 1 mg/mL of YE were chosen based on their higher encapsulation efficiency to perform the in vitro digestion experiments. After digestion, YE-loaded NEs only partially protected phenolic compounds from degradation; meanwhile the phenolic composition of YE including in MGs after digestion was quite similar to undigested YE. Moreover, the antioxidant activity of MGs after digestion was higher than NEs digested samples, which confirms the higher protection of YE phenolic compound by the milk gels systems. This research demonstrated the potential use of acidified MGs as carriers to improve the stability and antioxidant activity of yarrow phenolic compounds. Therefore, these matrices could be employed to develop new dairy products enriched with phenolic compounds.

Self-Assembled Carbohydrate Polymers for Food Applications: A Review

The self-assembled natural and synthetic polymers are booming. However, natural polymers obtained from native or modified carbohydrate polymers (CPs), such as celluloses, chitosan, glucans, gums, pectins, and starches, have had special attention as raw material in the manufacture of self-assembled polymer composite materials having several forms: films, hydrogels, micelles, and particles. The easy manipulation of the architecture of the CPs, as well as their high availability in nature, low cost, and being sustainable and green polymers have been the main positive points in the use of them for different applications. CPs have been used as building blocks for composite structures, and their easy orientation and ordering has given rise to self-assembled CPs (SCPs). These macromolecules have been little studied for food applications. Nonetheless, their research has grown mainly in the last 5 years as encapsulated food additive wall materials, food coatings, and edible films. The multifaceted properties (systems sensitive to pH, temperature, ionic strength, types of ions, mechanical force, and enzymes) of these devices are leading to the development of advanced food materials. This review article focused on the analysis of SCPs for food applications in order to encourage other research groups for their preparation and implementation.

Progress in Conductive Polyaniline-Based Nanocomposites for Biomedical Applications: A Review

Inherently conducting polymers (ICPs) are a specific category of synthetic polymers with distinctive electro-optic properties, which involve conjugated chains with alternating single and double bonds. Polyaniline (PANI), as one of the most well-known ICPs, has outstanding potential applications in biomedicine because of its high electrical conductivity and biocompatibility caused by its hydrophilic nature, low-toxicity, good environmental stability, and nanostructured morphology. Some of the limitations in the use of PANI, such as its low processability and degradability, can be overcome by the preparation of its blends and nanocomposites with various (bio)polymers and nanomaterials, respectively. This review describes the state-of-the-art of biological activities and applications of conductive PANI-based nanocomposites in the biomedical fields, such as antimicrobial therapy, drug delivery, biosensors, nerve regeneration, and tissue engineering. The latest progresses in the biomedical applications of PANI-based nanocomposites are reviewed to provide a background for future research.

A novel and biocompatible Fe3O4 loaded chitosan polyelectrolyte nanoparticles for the removal of Cd2+ ion

In this work, Fe₃O₄ loaded chitosan (CS) nanoparticles (NPs) and microparticles (MPs) were synthesized based on ionic gelation technology for the removal of Cd²⁺ ion. The influencing parameters including initial concentration, pH, contact time and recycling was evaluated and optimized. The results showed that particle size of Fe₃O₄ loaded CS NPs and MPs was in the range of 164.05-768.69 nm, and the former showed relatively higher adsorption capacities (97.86 mg/g) on Cd²⁺ ion than the latter after 90 min at pH 5.0 for the solutions with initial Cd²⁺ ion of 100 mg/L, respectively. Brunauer, Emmett and Teller (BET) test illustrated 61.48 m²/g of specific surface area, 0.0274 cm³/g of pore volume and 6.03 nm average pore size. The results of FT-IR, TEM, EDS and XRD indicated that Fe₃O₄ was well incorporated into CS NPs and MPs. Moreover, the adsorption equilibrium data fitted well with Langmuir isotherm model and adsorption process followed the pseudo-second-order model. The adsorption mechanisms could be well explained though coordination and electrostatic attraction. Findings of this work highlighted the potential using Fe₃O₄ loaded CS NPs as an effective and recyclable adsorbent for the removal of heavy metal ions in industrial wastewater treatment.

BSA Nanoparticles Modified with N-Acetylcysteine for Improving the Stability and Mucoadhesion of Curcumin in the Gastrointestinal Tract

A major obstacle to the clinical use of curcumin (CUR) is its reduced bioavailability because of the drug's hydrophobic nature, low intestinal absorption, and rapid metabolism. In this study, a novel oral drug delivery system was constructed for improving the stability and enhancing mucoadhesion of CUR in the gastrointestinal (GI) tract. First, CUR was encapsulated in the bovine serum albumin nanoparticles (CUR-BSA-NPs). Then, N-acetyl cysteine (NAC)-modified CUR-BSA-NPs (CUR-NBSA-NPs) were obtained. The average particle size and zeta potential of CUR-NBSA-NPs were 251.6 nm and -30.66 mV, respectively; encapsulation efficiency and drug loading were 85.79 and 10.9%, respectively. CUR-NBSA-NPs exhibited a sustained release property and prominently enhanced stability in simulated GI conditions. Additionally, enhanced mucoadhesion of CUR-NBSA-NPs was also observed. An MTT study showed that the CUR-NBSA-NPs were safe for oral administration. Overall, NAC-modified BSA-NPs may potentially serve as an oral vehicle for improving CUR stability in the GI tract and enhancing mucoadhesion.

Development and characterization of antioxidant active packaging and intelligent Al3+-sensing films based on carboxymethyl chitosan and quercetin

Different amounts of quercetin were mixed with carboxymethyl chitosan (CMCS) to develop novel antioxidant active packaging and intelligent Al³⁺-sensing films. The physical properties, structure, antioxidant and Al³⁺-sensing abilities of CMCS-quercetin composite films were investigated. Results showed CMCS-quercetin composite films presented a dark yellowish color. When compared with CMCS film, CMCS-quercetin composite films containing 5 and 7.5 wt% of quercetin on CMCS basis exhibited higher thicknesses, opacity and thermal stability; however, presented lower moisture contents, UV-vis light transmittance and elongation at break. Besides, the incorporation of quercetin could not significantly change the water solubility and water vapor barrier property of CMCS film. Morphological observation showed the surface of CMCS-quercetin composite film became coarse when 7.5 wt% of quercetin was incorporated. Infrared spectra and X-ray diffraction patterns of CMCS-quercetin composite films further indicated quercetin was compatible with CMCS. Importantly, CMCS-quercetin composite films could sustainably release antioxidant ability into aqueous and fatty food stimulants. Moreover, CMCS-quercetin composite films were sensitive to Al³⁺. The color and UV-vis absorption patterns of CMCS-quercetin composite films were changed by the addition of Al³⁺. Results suggested that CMCS-quercetin composite films could be used as novel antioxidant and intelligent Al³⁺-sensing materials in food packaging.

Fabrication of BSA-Pinus koraiensis polyphenol-chitosan nanoparticles and their release characteristics under in vitro simulated gastrointestinal digestion

BSA and chitosan were used to prepare nanoparticles of polyphenols from the pine cones of Pinus koraiensis (PKP-NPs).

Nano-in-Micro Delivery System Prepared by Co-Axial Air Flow for Oral Delivery of Conjugated Linoleic Acid

The preparation of a nano-in-micro delivery system (NiMDS) under mild conditions without using toxic organic solvents and expensive equipment still faces challenges. In this study, we introduced the co-axial air flow method to prepare NiMDS for the oral delivery of conjugated linoleic acid (CLA). The chitosan nanoparticles were prepared using the stearic-acid-modified chitosan through self-aggregation. Then, the chitosan nanoparticles were incorporated into alginate microparticles by the co-axial air flow method. The obtained chitosan nanoparticles and NiMDS were spherical in shape with the average sizes of 221⁻243 nm and 130⁻160 μm, respectively. Compared with alginate microparticles, the hybrid particles were of fewer fragments, were bigger in size, had a higher mechanical strength, and showed a controlled release in the phosphate buffer solution (pH 1.2 or 7.4). The release kinetics study showed that encapsulating the chitosan nanoparticles into the alginate microparticles inhibited the dissolution of alginate microparticles at the initial stage. These results revealed the potential of NiMDS as an ideal oral carrier for the sustained release of CLA in the gastrointestinal environment.