Emulsifying stability properties of octenyl succinic anhydride (OSA) modified waxy starches with different molecular structures

Effect of wet media milling on starch-quercetin complex: Enhancement of Pickering emulsifying ability and oxidative resistance

This research explored the effect of media milling on complexation of corn starch (CS) and quercetin (QC), interaction mechanism and Pickering emulsifying ability of corn-quercetin (CS-QC) complex. CS-QC with QC/CS ratio of 1:24 had the highest encapsulation efficiency of 76.00 ± 1.30 %. Average volume-mean diameter, average whole molecular size (Rh) and debranchedamylopectinchain length of CS-QC were significantly decreased after milling. Attenuated Total Reflectance-Fourier Transform Infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS) spectra confirmed the complexation between CS and QC. Emulsifying capacity and emulsion stability of Pickering emulsion stabilized by 5 % CS-QC complex particles after 120 min milling reached 100.00 % and 100.00. Pickering emulsions stabilized by these complex particles demonstrated superior oxidative stability. These results demonstrated that media milling could be an efficient physical approach to obtain starch-polyphenol complex by enhancing non-covalent interactions, which could not only be used as food-grade Pickering emulsifiers, but also retard lipid oxidation.

Citrus oil gland and cuticular wax inspired multifunctional gelatin film of OSA-starch nanoparticles-based nanoemulsions for preserving perishable fruit

Inspired by the citrus oil gland and cuticular wax, a multifunctional material that stably and continuously released the carvacrol and provided physical defenses was developed to address issues of fresh-cut fruits to microbial infestation and moisture loss. The results confirmed that low molecular weight and loose structure of starch nanoparticles prepared by the ultrasound-assisted Fenton system were preferable for octenyl succinic anhydride modification compared to native starch, achieving a higher degree of substitution (increased by 18.59 %), utilizing in preparing nanoemulsions (NEs) for encapsulating carvacrol (at 5 % level: 81.58 %). Furthermore, the NEs-based gelatin (G) film improved with surface hydrophobic modification by myristic acid (MA) successfully replicated the citrus oil gland and cuticular wax, providing superior antioxidant (enhanced by 3-4 times) and antimicrobial properties (95.99 % and 84.97 % against Staphylococcus aureus and Escherichia coli respectively), as well as the exceptional UV shielding (nearly 0 transmittance in the UV region), mechanical (72 % increase in tensile strength), and hydrophobic (WCA 133.63°). Moreover, the 5%NE-G@MA film inhibited foodborne microbial growth (reduced by 50 %) and water loss (controlled below 15 %), extending the shelf life of fresh-cut navel orange and kiwi. Thus, the multifunctional film was a potential shield for preserving perishable fresh-cut products.

Frontier in gellan gum-based microcapsules obtained by emulsification: Core-shell structure, interaction mechanism, intervention strategies

As a translucent functional gel with biodegradability, non-toxicity and acid resistance, gellan gum has been widely used in probiotic packaging, drug delivery, wound dressing, metal ion adsorption and other fields in recent years. Because of its remarkable gelation characteristics, gellan gum is suitable as the shell material of microcapsules to encapsulate functional substances, by which the functional components can improve stability and achieve delayed release. In recent years, many academically or commercially reliable products have rapidly emerged, but there is still a lack of relevant reports on in-depth research and systematic summaries regarding the process of microcapsule formation and its corresponding mechanisms. To address this challenge, this review focuses on the formation process and applications of gellan gum-based microcapsules, and details the commonly used preparation methods in microcapsule production. Additionally, it explores the impact of factors such as ion types, ion strength, temperature, pH, and others present in the solution on the performance of the microcapsules. On this basis, it summarizes and analyzes the prospects of gellan gum-based microcapsule products. The comprehensive insights from this review are expected to provide inspiration and design ideas for researchers.

Differences in the structural properties of three OSA starches and their effects on the performance of high internal phase Pickering emulsions

The emulsifying properties of emulsions are significantly influenced by the structural properties of octenyl succinic anhydride (OSA) starch. The purpose of this work was to elucidate the effect of the structure of OSA starch on its performance as an emulsifier to stabilize Pickering high-internal-phase emulsions (HIPEs). The degrees of substitution (DS) of the three OSA starches were 0.0137, 0.0177 and 0.0236, and their degrees of branching (DB) were 13.96 %, 14.20 % and 14.32 % measured by 1H NMR, which were sequentially labeled as OSA1, OSA2, and OSA3. The OSA3 starch with higher DS and DB had a lower critical micelle concentration (CMC) (0.11 mg/mL). Its emulsification activity (EAI) and emulsion stability (ES) were 61.8 m2/g and 72.5 min, respectively, which were higher than OSA1 and OSA2 starches. The contact angle of the three OSA starches increased from 45.35° to 80.03° with increasing DS and DB. Therefore, it is hypothesized that OSA3 starches have better emulsification properties. The results of physical stability of HIPEs confirmed the above results. These results indicated that DS and DB have a synergistic effect on emulsion properties, and OSA starch with higher DS and DB values were more conducive to the construction of stable HIPEs systems.

Developing biopolymer-stabilized emulsions for improved stability and bioaccessibility of lutein

Lutein is essential for infant visual and cognitive development but has low stability and solubility. This study aimed to enhance the stability and bioaccessibility of lutein using oil-in-water emulsions stabilized with biopolymers. Commercially available octenylsuccinylated (OS) starches, including capsule TA® (CTA), HI-CAP®100 (HC), and Purity Gum® 2000 (PG), along with gum Arabic (GA) variants Ticaloid acacia Max® (TAM), TICAmulsion® 3020 (TM), and pre-hydrate gum Arabic (PHGA), were chosen as emulsifiers. By screening the effect of biopolymer concentration and oil volume fraction (Φ), emulsions stabilized with CTA, HC, or TM at 20% and 30% (w/v) concentration and 70% Φ exhibited a gel-like structure and were selected for further assessments. After a week at 25 °C, emulsions stabilized by CTA and HC showed no significant change in droplet size, while TM emulsion exhibited a 1.58-fold increase. At 45 °C, all emulsions exhibited increase in droplet size. Lutein retention is higher in CTA emulsions at both storage temperatures than free lutein. In vitro bioaccessibility of all lutein emulsions was higher than that of free lutein. These findings highlight the superior stability and bioaccessibility of the lutein emulsion stabilized by OS starch, positioning it as a promising carrier to broaden lutein applications in infant foods.

Utilization of Biopolymer-Based Lutein Emulsion as an Effective Delivery System to Improve Lutein Bioavailability in Neonatal Rats

Newborns' eyes and brains are prone to oxidative stress. Lutein has antioxidant properties and is the main component of macular pigment essential for protecting the retina, but has low bioavailability, thereby limiting its potential as a nutritional supplement. Oil-in-water emulsions have been used as lutein delivery systems. In particular, octenylsuccinated (OS) starch is a biopolymer-derived emulsifier safe to use in infant foods, while exhibiting superior emulsifying capacity. This study determined the effects of an OS starch-stabilized lutein emulsion on lutein bioavailability in Sprague-Dawley neonatal rats. In an acute study, 10-day-old pups received a single oral dose of free lutein or lutein emulsion, with subsequent blood sampling over 24 h to analyze pharmacokinetics. The lutein emulsion group had a 2.12- and 1.91-fold higher maximum serum lutein concentration and area under the curve, respectively, compared to the free lutein group. In two daily dosing studies, oral lutein was given from postnatal day 5 to 18. Blood and tissue lutein concentrations were measured. The results indicated that the daily intake of lutein emulsion led to a higher lutein concentration in circulation and key tissues compared to free lutein. The OS starch-stabilized emulsion could be an effective and safe lutein delivery system for newborns.

Structure and surface properties of ozone-conjugated octenyl succinic anhydride modified waxy rice starch: Towards high-stable Pickering emulsion

In the present work, a dual-modified waxy rice starch (OOWRS) fabricated with OSA and ozone was successfully used to stabilize the O/W Pickering emulsion. The molecular structure, surface properties, and underlying stabilizing mechanism were systematically investigated. The results showed that oxidation occurring on the surface of OSA-modified waxy rice starch (OSAWRS) resulted in the presence of indentations and cracks. The relative crystallinity of starch was generally decreased with increasing degree of oxidation. Due to the introduction of carbonyl and the variation in surface structure, the hydrophobicity and acidity of OSAWRS were significantly enhanced after the ozone treatment. Remarkably, OOWRS stabilized Pickering emulsion exhibited a feature of typical O/W emulsion, and the 0.5 h and 1 h OOWRS emulsion exhibited a more uniform droplet size as well as a higher surface potential. We also noted that a weak-gel network was formed within the OOWRS emulsion system as the hydrophilic starch chains played a bridging role. Two reasons for the improved stability of the emulsion were the special gel structure and the enhanced electrical repulsion among the droplets. This research provides that ozone-conjugated OSA modification is a promising strategy for improving the emulsion ability of starch-based Pickering emulsions.

Correlation between interfacial layer properties and physical stability of food emulsions: current trends, challenges, strategies, and further perspectives

Emulsions are thermodynamically unstable systems that tend to separate into two immiscible phases over time. The interfacial layer formed by the emulsifiers adsorbed at the oil-water interface plays an important role in the emulsion stability. The interfacial layer properties of emulsion droplets have been considered the cutting-in points that influence emulsion stability, a traditional motif of physical chemistry and colloid chemistry of particular significance in relation to the food science and technology sector. Although many attempts have shown that high interfacial viscoelasticity may contribute to long-term emulsion stability, a universal relationship for all cases between the interfacial layer features at the microscopic scale and the bulk physical stability of the emulsion at the macroscopic scale remains to be established. Not only that, but integrating the cognition from different scales of emulsions and establishing a unified single model to fill the gap in awareness between scales also remain challenging. In this review, we present a comprehensive overview of recent progress in the general science of emulsion stability with a peculiar focus on interfacial layer characteristics in relation to the formation and stabilization of food emulsions, where the natural origin and edible safety of emulsifiers and stabilizers are highly requested. This review begins with a general overview of the construction and destruction of interfacial layers in emulsions to highlight the most important physicochemical characteristics of interfacial layers (formation kinetics, surface load, interactions among adsorbed emulsifiers, thickness and structure, and shear and dilatational rheology), and their roles in controlling emulsion stability. Subsequently, the structural effects of a series of typically dietary emulsifiers (small-molecule surfactants,proteins, polysaccharides, protein-polysaccharide complexes, and particles) on oil-water interfaces in food emulsions are emphasized. Finally, the main protocols developed for modifying the structural characteristics of adsorbed emulsifiers at multiple scales and improving the stability of emulsions are highlighted. Overall, this paper aims to comprehensively study the literature findings in the past decade and find out the commonality of multi-scale structures of emulsifiers, so as to deeply understand the common characteristics and emulsification stability behaviour of adsorption emulsifiers with different interfacial layer structures. It is difficult to say that there has been significant progress in the underlying principles and technologies in the general science of emulsion stability over the last decade or two. However, the correlation between interfacial layer properties and physical stability of food emulsions promotes revealing the role of interfacial rheological properties in emulsion stability, providing guidance on controlling the bulk properties by tuning the interfacial layer functionality.

Multiscale combined techniques for evaluating emulsion stability: A critical review

Emulsions are multiscale and thermodynamically unstable systems which will undergo various unstable processes over time. The behavior of emulsifier molecules at the oil-water interface and the properties of the interfacial film are very important to the stability of the emulsion. In this paper, we mainly discussed the instability phenomena and mechanisms of emulsions, the effects of interfacial films on the long-term stability of emulsions and summarized a set of systematic multiscale combined methods for studying emulsion stability, including droplet size and distribution, zeta-potential, the continuous phase viscosity, adsorption mass and thickness of the interfacial film, interfacial dilatational rheology, interfacial shear rheology, particle tracking microrheology, visualization technologies of the interfacial film, molecular dynamics simulation and the quantitative evaluation methods of emulsion stability. This review provides the latest research progress and a set of systematic multiscale combined techniques and methods for researchers who are committed to the study of oil-water interface and emulsion stability. In addition, this review has important guiding significances for designing and customizing interfacial films with different properties, so as to obtain emulsion-based delivery systems with varying stability, oil digestibility and bioactive substance utilization.

Starch Janus Particles: Bulk Synthesis, Self-Assembly, Rheology, and Potential Food Applications

Although incredible progress in the field of Janus particles over the last three decades has delivered many promising smart-material prototypes, from cancer-targeting drug delivery vehicles to self-motile nanobots, their real-world applications have been somewhat tempered by concerns over scalability and sustainability. In this study, we adapt a simple, scalable 3D mask method to synthesize Janus particles in bulk using starch as the base material: a natural biopolymer that is safe, biocompatible, biodegradable, cheap, widely available, and versatile. Using this method, starch granules are first embedded on a wax droplet such that half of the starch is covered; then, the uncovered half is treated with octenyl succinic anhydride, after which the wax coating is removed. Janus particles with 49% Janus balance can be produced in this way and were observed to self-assemble into wormlike strings in water due to their hydrophobic/hydrophilic nature. Our Janus starch granules outperform the non-Janus controls as thickening and gelling agents: they exhibit a fourfold increase in water-holding capacity, a 30% lower critical caking concentration, and a viscosity greater by orders of magnitude. They also form gels that are much firmer and more stable. Starch Janus particles with these functional properties can be used as novel, lower-calorie, highly efficient, plant-based super-thickeners in the food industry, potentially reducing starch use in food by 55%.

A review on octenyl succinic anhydride modified starch-based Pickering-emulsion: Instabilities and ingredients interactions

Pickering emulsions endow attractive features and a wide versatility in both food and nonfood fields. In the last decades, a noticeable interest has emerged toward the use of octenyl succinic anhydride (OSA)-starch to improve the long-term stability in such systems. In this review, instabilities were pointed out, where a new kinetic equilibrium was observed in Pickering emulsions assigned to migration and size variations of particles. These features were monitored using rheological measurements to understand microstructure and droplets mobility. The elastic modulus (G'), the viscous modulus (G″), and tan(δ) values were attributed to the transition from solid to fluid and assigned to the instability of the formulation regardless of the type of the system configuration. The novelties in using OSA-modified starch, were also exposed. The chemical modification of starch decreased creaming for months. Interaction between OSA-modified starches and some ionic components (potassium, magnesium, and calcium) as well as hydrocolloids and proteins reduced creaming and coalescence due to dense interfacial film. Furthermore, the key parameters (oil fraction, fatty acids composition, oxidative stress oil polarity, and oil viscosity) that govern oil phase in Pickering emulsion, were analyzed. These parameters were found to be positively correlated to the stability of Pickering emulsions.

Effects of beeswax emulsified by octenyl succinate starch on the structure and physicochemical properties of acid-modified starchfilms

This work aimed to develop a novel strategy to modulate the distribution of beeswax in acid-modified starch films via tuning octenyl succinate starch (OSS) ratios and to elucidate their structure-property relationships. The apparent viscosity and storage modulus of the film-forming solution decreased with the increase of OSS ratio. Attenuated total reflectance-fourier transform infrared (ATR-FTIR) spectroscopy revealed that the hydrogen bond in the film-forming network was cleaved with the presence of OSS. Scanning electron microscope (SEM), atomic force microscope (AFM), and X-ray diffraction (XRD) demonstrated that OSS ratio had an obvious effect on the formation and distribution of beeswax crystal particles. Uniform distribution of beeswax effectively enhanced the hydrophobicity and water barrier properties of films and performed preferable elongation at break but at the expense of tensile strength and optical properties. The films with higher OSS ratio (>12 %) presented higher thermal stability. This study provides new information on the rational design of emulsified films to obtain desirable physicochemical properties by tuning the distribution of beeswax.

Optimization of oil-in-water emulsion capacity and stability of octenyl succinic anhydride-modified porang glucomannan (Amorphophallus muelleri Blume)

Surfactants are used to reduce surface and interfacial tension to form emulsions. Polysaccharides such as Porang Glucomannan (PG) with high viscosity can be used as surfactants. This research aimed to optimize the concentration of sodium carbonate (Na₂CO₃) and octenyl succinic anhydride (OSA) in modifying PG using a microwave. The optimization process is carried out using response surface methodology (RSM) with a two-factor central composite design (CCD), namely concentration of Na₂CO₃ (0.17–5.834%) and OSA (2.17–7.83%). The result showed that the concentration of Na₂CO₃ and OSA strongly influences emulsion capacity and stability. The optimum conditions that resulted in the highest emulsion capacity and stability were obtained at concentrations of Na₂CO₃ and OSA which were 2.25% and 6.19%, respectively. Degree of Substitution (DS), FTIR analysis, contact angle, and increased viscosity confirmed that OSA substitution occurred in PG. The characteristics of OSA-modified porang glucomannan (PGOS) such as: emulsion capacity and stability, Degree of Substitution (DS), contact angle, and viscosity increased to 34.6% and 32.5%, 1.02%, 92^o, 5720 cP, respectively. FT-IR analysis confirmed the presence of OSA substitution at 1734 cm⁻¹. PGOS can be used as a surfactant or gelator in oleogel production.

Revealing substitution priority and pattern of octenylsuccinic groups along the starch chain under a continuous mode

Octenylsuccinic (OS) groups distribution was considered random under traditional batch mode (BM) process due to excessive available octenyl succinic anhydride (OSA) at early stage, making the functionality optimization of OSA starch under restricted substitution degree (DS) difficult. To reveal the priority rule of substituent position at starch molecular level, a continuous mode (CM, dropwise OSA addition) was applied for OSA starch preparation. Initial OSA substitution was predominately at the branching points of amylopectin backbone, then successive at the branching points of shorter and longer chains with increasing DS. As DS increased over 1.49%, substitution started occurring along the chains and moved towards the non-reducing ends until DS reached 6.65%. At similar DS, more branching point substitutions occurred at CM starch, showing superior emulsifying property over BM starch. OSA substitution priority rule does exist under controlled OSA supply, which would facilitate OSA starch design with specific substitution pattern and favored functionality.

Octenyl Succinate Modification of Starch Enhances the Formation of Starch-Lipid Complexes

The present study investigated the effect of octenyl succinic anhydride (OSA) modification of starch on the formation of starch-lipid complexes. The complexing index (CI) showed that native maize starch (NMS) formed more complexes with monopalmityl glycerol (MPG) than with palmitic acid (PA), whereas dipalmityl glycerol (DPG) was not effective in forming complexes with NMS. After OSA modification, the complexation between OSA-starch and lipids was greatly enhanced, especially for PA and DPG, and the CI values increased from 79.6 to 93.3% for OSA-starch-PA and from 80.3 to 93.2% for OSA-starch-DPG complexes with increasing DS of OSA-starch. Structural analyses showed that OSA-starch-lipid complexes had higher degrees of long- and short-range molecular orders than the corresponding NMS-lipid complexes. This study showed for the first time that DPG can form complexes with OSA-starch, which was attributed to the increased dispersion of DPG in water by the emulsifying ability of OSA-starch. The finding is of great significance for a better understanding of the formation of starch-lipid complexes.

Recent Developments in the Formulation and Use of Polymers and Particles of Plant-based Origin for Emulsion Stabilizations

The main scope of this Review was the recent progress in the use of plant-based polymers and particles for the stabilization of Pickering and non-Pickering emulsion systems. Due to their availability and promising performance, it was discussed how the source, modification, and formulation of cellulose, starch, protein, and lignin-based polymers and particles would impact their emulsion stabilization. Special attention was given toward the material synthesis in two forms of polymeric surfactants and particles and the corresponding formulated emulsions. Also, the effects of particle size, degree of aggregation, wettability, degree of substitution, and electrical charge in stabilizing oil/water systems and micro- and macro-structures of oil droplets were discussed. The wide range of applications using such plant-based stabilizers in different technologies as well as their challenge and future perspectives were described.

Interfacial and Emulsion Characteristics of Oil-Water Systems in the Presence of Polymeric Lignin Surfactant

It is hypothesized that polymeric lignin surfactants have different affinities for stabilizing oil-water emulsions and that the emulsifying performance of these surfactants is highly affected by their adsorption performance at the oil-water interface. To validate this hypothesis, the adsorption performance of sulfethylated lignin (SEKL) surfactant at different oil-water interfaces was examined by assessing the contact angle, dynamic interfacial tension, and surface loading (Γ). Moreover, the interfacial adsorption kinetics of SEKL was comprehensively assessed in different oil-water systems to reveal the mechanisms of the SEKL adsorption at the interface. Also, the impacts of SEKL concentration and ionic strength on the performance of SEKL as an effective emulsifier for the emulsions were assessed. Furthermore, the droplet size and instability index of the emulsions were systematically correlated with the adsorption performance of SEKL at the interface of oil and water. For the first time, by implementing a modified Ward Toradai diffusion model, two distinct early stages of the adsorption of SEKL at the oil interface were identified. Interestingly, the second stage was the determining stage of adsorption with the diffusion-controlled mechanism when polymers reconfigured at the oil-water interface. Salt screening facilitated the clustering of SEKL upon charge repulsion elimination, which removed the energy barrier in the first stage of adsorption (ΔE_p→0 = 0), but it introduced a steric barrier upon the reconfiguration of polymers at the oil interfaces in the second stage of adsorption. In addition to the kinetics of adsorption, satisfactory correlations were observed between surface pressure (Δγ = γ_∞ - γ₀), surface loading (Γ) of polymers, and contact angle at oil interfaces on one hand and the oil droplet size and emulsion stability on the other hand.

Effects of the degree of substitution of OSA on the properties of starch microparticle-stabilized emulsions

An amphiphilic polymer of octenyl succinic anhydride (OSA)-modified starch microparticles (SMPs) was synthesized and used to stabilize emulsions. The effects of the degree of substitution (DS) on the physicochemical properties of OSA-modified SMPs and the stability of OSA-modified SMP-stabilized emulsions during a three-step in vitro digestion model were studied. The results showed that OSA esterification acted on the surface of SMPs and that the hydrophobicity of SMPs improved with increasing DS. In addition, the emulsion stability during storage and the changes in ionic strength were enhanced by increasing DS. Moreover, a higher DS also led to smaller oil droplets and more OSA-modified SMPs retained during intestinal digestion. Most importantly, the encapsulation efficiency and the bioaccessibility of curcumin in the emulsion during intestinal digestion were both enhanced significantly with the increase of DS.

Starch nanocrystals as the particle emulsifier to stabilize caprylic/capric triglycerides-in-water emulsions

Starch nanocrystals (SNCs) grafted with octenyl succinic anhydride (OSA) were used to stabilize caprylic/capric triglycerides (GTCC)-in-water emulsions. The morphology and viscoelasticity of emulsions were studied in terms of particle loadings and degrees of substitution (DSs). It is found that the emulsifying capacities of SNCs increase with increased DSs. Both the pristine SNC and modified ones can be well used to stabilize emulsions, whereas the emulsification follows different mechanisms. The platelet-like structure of SNCs, together with its improved amphiphilicity after surface treatments, are important to the formation and evolution of droplet clusters. The deformation and relaxation of those clusters result in weak flow overshoots and strong thixotropy in different shear flow fields, which favor storage and applications of GTCC-in-water emulsions as hydrocolloids. The mechanisms were then discussed in terms of rigidity of SNC and relaxations of clusters. This work proposes a promising application of SNC in food and cosmetic industries.

Exploring the effect of OSA-esterified waxy corn starch on naringin solubility and the interactions in their self-assembled aggregates

Octenyl succinic anhydride esterified waxy corn starches (OSAS) with five different molecular weights (MWs) were prepared by enzymatic hydrolysis and their effects on naringin solubility were studied. The MW of OSAS was found to significantly influence the amount of naringin embedded in the complex formed by self-aggregation. OSAS with medium MW (M-OSAS) formed complex with the highest naringin entrapment. This system showed an A_L type water phase solubility curve (indicating a 1:1 stoichiometric inclusion complex) and an increase of 848.83 folds in naringin solubility. Further investigation on the interactions between M-OSAS and naringin using FTIR, XRD, DSC and NMR confirmed the encapsulation of naringin into the inner cavity of M-OSAS. TEM and particle size analysis indicated the complex was spherical in shape, having a mean particle size of 257.07 nm and size distribution of 10-1000 nm. This study has provided a basis for solubility enhancement of citrus flavonoids using OSAS.

Construction of octenyl succinic anhydride modified porous starch for improving bioaccessibility of β-carotene in emulsions

Modified porous starch (PS), by introducing octenyl succinic anhydride (OSA) moieties, was synthesized successfully, which was applied as an emulsion of β-carotene for the first time. The pores and channels within porous starch provided more possibilities for OSA to modify starch. The ester linkage of OSA modified PS with different degrees of substitution (DS) were confirmed by both ¹³C solid-state NMR and Fourier transform-infrared spectroscopy (FT-IR). The hydrophobic octenyl succinic and hydrophilic hydroxyl groups of OSA modified PS showed the good emulsifying capability, which could be utilized to prepare β-carotene emulsions. And the bioaccessibility of β-carotene was also enhanced with increasing DS of OSA modified starch. This study not only paves a new way using porous starches for modification of starch, but also offers an attractive alternative for obtaining emulsion-based delivery systems for bioactive components.

The synthesis and application of OSA modified porous starch.

Effect of octenyl succinic anhydride starch ester by semi-dry method with vacuum-microwave assistant

Corn starch was esterified with octenyl succinic anhydride (OSA), in which semidry method assisted with vacuum-microwave treatment was used under the alkalescent condition. The effect of vacuum treatment on esterification was studied. The products were characterized by Fourier transform infrared (FT-IR) spectroscopy, ¹H nuclear magnetic resonance (NMR), scanning electron microscopy (SEM) and X-ray diffraction. And the emulsifying properties were investigated with the emulsifying capacity (EC), emulsion droplet size and confocal laser scanning microscopy (CLSM). The degree of substitution (DS) of OSA starch increased significantly (ρ < 0.05) assisted by the vacuum-microwave treatment with the same dosage of reactant compared with the microwave only. The results confirmed the formation of OSA starch prepared by the method, all reactions occurred mainly on the surface of granules, and had no significant effect on the starch crystallinity. The OSA starch was a good polymeric surfactant with good abilities both in hydrophilic and lipophilic. The emulsifying capacity, degree of substitution of the OSA starch prepared by the method attractively showed vast potential for scale production.

Polysaccharides at fluid interfaces of food systems

Fabrication of next generation polysaccharides with interfacial properties is driven by the need to create high performance surfactants that operate at extreme environments, as for example in complex food formulations or in the gastrointestinal tract. The present review examines the behaviour of polysaccharides at fluid food interfaces focusing on their performance in the absence of any other intentionally added interfacially active components. Relevant theoretical principles of colloidal stabilisation using concepts that have been developed for synthetic polymers at interfaces are firstly introduced. The role of protein that in most cases is present in polysaccharide preparations either as contaminant or as integral part of the structure is also discussed. Critical assessment of the literature reveals that although protein may contribute to emulsion formation mostly as an anchor for polysaccharides to attach, it is not the determinant factor for the long-term emulsion stability, irrespectively of polysaccharide structure. Interfacial performance of key polysaccharides is also assessed revealing shared characteristics in their modes of adsorption. Conformation of polysaccharides, as affected by the composition of the aqueous solvent needs to be closely controlled, as it seems to be the underlying fundamental cause of stabilisation events and appears to be more important than the constituent polysaccharide sugar-monomers. Finally, polysaccharide adsorption is better understood by regarding them as copolymers, as this approach may assist to better control their properties with the aim to create the next generation biosurfactants.