Effects of wheat gluten modified by deamidation-heating with three different acids on the microstructure of model oil-in-water emulsion and rheological–physical property of ice cream

Improved toughening attributes of coix seed oil high internal phase Pickering emulsion gel via the carrageenan and super-deamidated wheat gluten microparticles interfacial network fotified by the acid-heat induction strategy

The toughening coix seed oil (CSO) high internal phase Pickering emulsion (CSO-HIPES) and gel (CSO-HIPESG) comprised of carrageenan (CR)/super-deamidated-gluten (SDG) micro-particles (CR/SDG) were investigated via acid-heat induction. Results showed polysaccharide natural deep eutectic solvent (P-NADES) by citric acid-glucose-carrageenan ((CGCR), molar ratio at 1:1:0.035) was the crucial for the preparation of SDG (deamidation degree, 99.38 %). P-NADES super-deamidation significantly enhanced emulsifying properties of SDG, increased the exposure of cysteine residues (26.77 μM/g) and strengthened hydrogen bonding interactions between SDG protein molecules. Confocal laser scanning microscope displayed the embedded CSO formed uniformly distributed emulsion droplets of smaller size (from 1253.97 to 253.35 nm) along with increased electrostatic repulsion (from 8.72 to 21.03 mV) of CSO-HIPES. It had excellent interfacial stability for the storage of 90 d under the optimized conditions at pH 5. CSO-HIPESG displayed exceptional stability towards heat (70-78 °C, 20-40 min), NaCl (20-40 mol/L), storage (90 d) upon acid-heat induction of CSO-HIPES, in coordination with the retarded oxidation process of CSO. The texture and stability of CSO-HIPESG were determined superior to commercially cream, especially for plasticity and water retention capacity. These findings further validated the potential of CR/SDG-encapsulated CSO as an exceptional interfacial stabilizer for HIPESG applications.

Prolamin-pectin complexes: Structural properties, interaction mechanisms and food applications

Prolamin, a class of plant protein mainly derived from grains, and pectins, complex-structured polysaccharides, are natural biological macromolecules with versatile functional properties. The interactions between prolamins and pectin have been widely studied and applied, demonstrating that both covalent and non-covalent interactions play pivotal roles in the formation of prolamin-pectin complexes. These interactions impart exceptional physicochemical and functional properties to the complexes. This review also details the main applications of prolamin-pectin complexes, including emulsions, nanoparticles, hydrogels and films. The similarities in their reaction principles are based on the interaction of complexes that improve their physicochemical and functional properties, while the difference lies in the specific modes of action, involving the emulsifying properties, self-assembly properties, gelling properties and film-forming properties of prolamin and pectin. By delving into the intricate mechanisms underlying prolamin-pectin interactions and their diverse applications in the food industry, this review offers valuable insights for advancing the development and utilization of these complexes.

Insight into the solubilization mechanism of wheat gluten by protease modification from conformational change and molecular interaction perspective

The low solubility limits the utilization of other functional characteristics of wheat gluten (WG). This study effectively improved the solubility of WG through protease modification and explored the potential mechanism of protease modification to enhance the solubility of WG, further stimulating the potential application of WG in the food industry. Solubility of WG modified with alkaline protease, complex protease, and neutral protease was enhanced by 98.99%, 54.59%, and 51.68%, respectively. Notably, the content of β-sheet was reduced while the combined effect of hydrogen bond and ionic bond were increased after protease modification. Meanwhile, the reduced molecular size and viscoelasticity as well as the elevated surface hydrophobicity, thermostability, water absorption capacity, and crystallinity were observed in modified WG. Moreover, molecular docking indicated that protease was specifically bound to the amino acid residues of WG through hydrogen bonding, hydrophobic interaction, and salt bridge.

Wheat gluten deamidation: structure, allergenicity and its application in hypoallergenic noodles

BACKGROUND

Wheat gluten (WG) containing gliadin and glutenin are considered the main allergens in wheat allergy as a result of their glutamine-rich peptides. Deamidation is a viable and efficient approach for protein modifications converting glutamine into glutamic acid, which may have the potential for allergenicity reduction of WG.

RESULTS

Deamidation by citric acid was performed to investigate the effects on structure, allergenicity and noodle textural properties of wheat gluten (WG). WG was heated at 100 °C in 1 m citric acid to yield deamidated WG with degrees of deamidation (DD) ranging from DWG-25 (25% DD) to DWG-70 (70% DD). Fourier-transform infrared and intrinsic fluorescence spectroscopy results suggested the unfolding of WG structure during deamidation, and sodium dodecyl sulphate-polyacrylamide gel electrophoresis showed molecular weight shifts at the 35-63 kDa region, suggesting that the deamidation mainly occurred on low molecular weight glutenin subunits and γ- gliadin of the WG. An enzyme-linked immunosorbent assay of deamidated WG revealed a decrease in absorbance and immunoblotting indicated that the intensities of protein bands at 35-63 kDa decreased, which suggested that deamidation of WG might have caused a greater loss of epitopes than the generation of new epitopes caused by unfolding of WG, and thereby reduction of the immunodominant immunoglobulin E binding capacity, ultimately leading to the decrease in allergenicity. DWG-25 was used in the preparation of recombinant hypoallergenic noodles, and the hardness, elasticity, chewiness and gumminess were improved significantly by the addition of azodicarbonamide.

CONCLUSION

The present shows the potential for deamidation of the WG products used in novel hypoallergenic food development. © 2023 Society of Chemical Industry.

Changes in the structure and functional properties of soybean isolate protein: Effects of different modification methods

Soybean protein isolate (SPI) is an important plant protein in food processing; however, its spherical structure prevents the exposure of its hydrophobic residues and affects its functional properties. In this study, we elucidate the effects of deamidation, phosphorylation, and glycosylation on the structure (Fourier-transform infrared spectroscopy, circular dichroism, fluorescence, and scanning electron microscopy) and functional properties (solubility, emulsifying activity index (EAI), and emulsifying stability index (ESI)) of SPI. The zeta potentials of the deamidated, phosphorylated, and glycosylated (DSPI, PSPI, and MSPI, respectively) samples decreased significantly (p < 0.05) relative to those of SPI. The functional properties of the modified SPI samples were improved, with MSPI-2 showing the best solubility (86.73 ± 0.34%), EAI (118.89 ± 0.73 m2/g), and ESI (273.33 ± 0.59 min). Moreover, the effects of the three modifications on the SPI functional properties increase in the order MSPI > PSPI > DSPI. These results provide a theoretical understanding the relationship between the modifications and SPI structure.

Enhancing the solubility and emulsion properties of rice protein by deamidation of citric acid-based natural deep eutectic solvents

The characteristics of rice protein deamidated (DRP) by choline chloride-citric acid and glucose-citric acid natural deep eutectic solvents (C-C NADES, G-C NADES) at different dilutions were investigated. Compared with the effect of citric acid deamidation on the structural and functional properties of the protein, the DRP from the NADESs led to remarkable differences in the degree of hydrolysis (DH), SDS-PAGE, morphology, surface hydrophobicity, average particle size, intrinsic fluorescence, amino acid compositions, and emulsion activity. The results of SDS-PAGE, DH, and SEM showed the NADESs reduced the occurrence of uncontrolled hydrolysis of protein during acid deamidation. DRP from C-C and G-C NADESs was found to significantly improve solubility. DRP prepared by C-C NADES showed a more than 40 % solubility over a wide pH range associated with its higher emulsifying activity (37.62-44.19 m2/g) and emulsifying stability (73.76-86.9 min), as well as a better deamidation effect while lower DH. Thus, these findings showed that acid-based NADESs had great potential as a deamidation solvent to expand the application of protein.

Citric Acid: Properties, Microbial Production, and Applications in Industries

Citric acid finds broad applications in various industrial sectors, such as the pharmaceutical, food, chemical, and cosmetic industries. The bioproduction of citric acid uses various microorganisms, but the most commonly employed ones are filamentous fungi such as Aspergillus niger and yeast Yarrowia lipolytica. This article presents a literature review on the properties of citric acid, the microorganisms and substrates used, different fermentation techniques, its industrial utilization, and the global citric acid market. This review emphasizes that there is still much to explore, both in terms of production process techniques and emerging new applications of citric acid.

Extraction of pectin from watermelon and pomegranate peels with different methods and its application in ice cream as an emulsifier

Pectin extraction from watermelon peel (WP) and pomegranate peel (PP) was carried out using three different extraction methods: classical solvent extraction (CSE), ultrasound-assisted extraction (UAE), and microwave-assisted extraction (MAE). Extraction parameters (pH, temperature, time, and speed/amplitude/power) were optimized to target maximum crude pectin yield (CPY), while the sample-to-solvent ratio (SS) was determined to be fixed at 1:10 w/v at all experiments. CPY was increased by low pH, high temperature, and long time. The pectins obtained at optimum conditions were characterized regarding the physicochemical and rheological properties, and the pectin solutions were found to be typical pseudoplastic fluids. WP pectin extracted with MAE and PP pectin extracted with UAE were determined to have the best emulsifying properties and added to the ice cream formulations. MAE had the maximum CPY of 9.40% for WP (pH = 1.3, 6 min, 596 W) and the best emulsifying properties. UAE had the best emulsifying properties for PP and the CPY was 11.56% in conditions of pH = 1.5, a temperature of 69°C, an extraction time of 29 min, and a 32% amplitude. The use of PP pectin resulted in a significant increase in the apparent viscosity of ice cream mix and also the first dripping time and the hardness of ice cream over commercial emulsifier. Melting properties and hardness values of ice cream with WP pectin were comparatively closer to those of ice cream with commercial emulsifier. On the other hand, the first dripping time and hardness value of ice cream with PP pectin having 60.25 min and 3.84 N, respectively, were higher than those of commercial ice cream having 53.75 min and 2.14 N, respectively. Practical Application: The utilization of WP and PP, which are good sources for pectin production, benefits both a sustainable environment and a sustainable food industry. Pectin extracted from WP and PP as an emulsifier in ice cream can ensure the production of ice creams with good melting properties. Pectin can be used as a healthy, sustainable, and economical alternative emulsifier in the ice cream industry.

Updates on Plant-Based Protein Products as an Alternative to Animal Protein: Technology, Properties, and Their Health Benefits

Plant-based protein products, represented by "plant meat", are gaining more and more popularity as an alternative to animal proteins. In the present review, we aimed to update the current status of research and industrial growth of plant-based protein products, including plant-based meat, plant-based eggs, plant-based dairy products, and plant-based protein emulsion foods. Moreover, the common processing technology of plant-based protein products and its principles, as well as the emerging strategies, are given equal importance. The knowledge gap between the use of plant proteins and animal proteins is also described, such as poor functional properties, insufficient texture, low protein biomass, allergens, and off-flavors, etc. Furthermore, the nutritional and health benefits of plant-based protein products are highlighted. Lately, researchers are committed to exploring novel plant protein resources and high-quality proteins with enhanced properties through the latest scientific and technological interventions, including physical, chemical, enzyme, fermentation, germination, and protein interaction technology.

Relevance of the air-water interfacial and foaming properties of (modified) wheat proteins for food systems

A shift from animal protein- to plant protein-based foods is crucial in transitioning toward a more sustainable global food system. Among food products typically stabilized by animal proteins, food foams represent a major category. Wheat proteins are ubiquitous and structurally diverse, which offers opportunities for exploiting them for food foam and air-water interface stabilization. Notably, they are often classified into those that are soluble in aqueous systems (albumins and globulins) and those that are not (gliadins and glutenins). However, gliadins are at least to an extent water extractable and thus surface active. We here provide a comprehensive overview of studies investigating the air-water interfacial and foaming properties of the different wheat protein fractions. Characteristics in model systems are related to the functional role that wheat proteins play in gas cell stabilization in existing wheat-based foods (bread dough, cake batter, and beer foam). Still, to further extend the applicability of wheat proteins, and particularly the poorly soluble glutenins, to other food foams, their modification is required. Different physical, (bio)chemical, and other modification strategies that have been utilized to alter the solubility and therefore the air-water interfacial and foaming properties of the gluten protein fraction are critically reviewed. Such approaches may open up new opportunities for the application of (modified) gluten proteins in other food products, such as plant-based meringues, whippable drinks, or ice cream. In each section, important knowledge gaps are highlighted and perspectives for research efforts that could lead to the rational design of wheat protein systems with enhanced functionality and overall an increased applicability in food industry are proposed.

Emulsifying and whipping properties of mixing polysaccharide dispersions: effect of ratio between insoluble soybean fiber and hydroxypropyl methylcellulose

BACKGROUND

The interactions between various food colloids in different systems (e.g., dispersions, emulsions, creams) have a bearing on the processing and characteristics of food systems. Hydrophilic polysaccharides have been proven to have the potential to fabricate the above systems. In the present work, hydroxypropyl methylcellulose (HPMC) was partially replaced by the insoluble soybean fiber (ISF) extracted from defatted okara to prepare mixing dispersions, oil-in-water emulsions and whipped creams.

RESULTS

The presented work showed that as the proportion of ISF increased, the foaming properties of ISF/HPMC dispersions were enhanced, the absolute value of the ζ-potential and the particle size of the emulsions increased, while the heat stability and centrifugal stability first increased and then decreased. Upon whipping, the loss angle (tan δ) decreased first and then increased, while the overrun, foam stability and cream stability, as well as the elastic modulus (G'), presented the opposite trend.

CONCLUSION

These results indicated that an appropriate amount (40-60%) of ISF in the ISF/HPMC systems enhanced the foaming and emulsifying capacities of mixtures and the stability of the resultant emulsion; subsequently, the whipping performance and whipped cream network structure were strengthened, suggesting that ISF has great potential for application in whipped cream as a 'green' and safe food ingredient. © 2022 Society of Chemical Industry.

Effect of subfreezing storage on the qualities of dough and bread containing pea protein

BACKGROUND

In this paper, -6, -9 and -12 °C were selected as subfreezing temperatures of dough containing pea protein based on the results of low-field nuclear magnetic relaxation time. The effect of storage at subfreezing temperatures on dough properties was then investigated and compared with sample storage at -18 °C.

RESULTS

The pH value, springiness, resilience, cohesiveness of dough and sensory score of bread gradually decreased and the hardness and water loss rate of dough gradually increased with the extension of storage time. However, dough hardness, viscoelasticity and fermentation volume were maintained more effectively in subfreezing storage than in -18 °C storage. The subfreezing temperature could alleviate the damage of gluten network structure in frozen dough by ice crystals and was beneficial in maintaining the elasticity of gluten proteins. The network system of pea protein, gluten protein and starch granules in dough storage at -9 and -12 °C was more tightly connected and the microstructure was similar to that at -18 °C. There was no significant difference between the quality of bread made from the dough stored at subfreezing temperature and that stored at -18 °C for 1-6 weeks, and the preservation effect at -12 °C was closer to that at -18 °C.

CONCLUSION

Subfreezing storage can keep the stability of dough containing pea protein close to traditional frozen storage (-18 °C), which provides a new method for storage and transportation of frozen dough. © 2022 Society of Chemical Industry.

Effects of Yam (Dioscorea rotundata) Mucilage on the Physical, Rheological and Stability Characteristics of Ice Cream

In the present investigation, yam mucilage was evaluated as a stabilizer and emulsifier in the formulation of vanilla flavored ice cream; physicochemical, rheological, and stability characteristics were determined. A completely randomized bifactorial design was used (yam mucilage: Carboxymethylcellulose ratio with the following levels: 100:0, 80:20, 50:50, and 20:80, and stabilizers concentration with levels of 0.4 and 0.8%). Results showed an increase in the protein content present in ice cream mixture as the amount of mucilage increases. Rheologically, it was found that ice cream has the characteristic behavior of a pseudoplastic fluid, presenting a viscoelastic structure where elastic behavior predominates. In addition, ratios with a higher content of mucilage incorporated a greater volume of air and presented the longest melting times, delaying drops falling time; in the same way mucilage gives ice cream a freezing temperature between −6.1 to −2.8 °C, indicating that the application of mucilage in food industry is possible due to its nutritional value, and it gives ice cream stability properties.

Protein deamidation to produce processable ingredients and engineered colloids for emerging food applications

With the ever-increasing demands for functional and sustainable foods from the general public, there is currently a paradigm shift in the food industry toward the production of novel protein-based diet. Food scientists are therefore motivated to search for natural protein sources and innovative technologies to modify their chemical structure for desirable functionality and thus utilization. Deamidation is a viable, efficient, and attractive approach for modifying proteins owing to its ease of operating, specificity, and cost-effective processes. Over the past three decades, the knowledge of protein deamidation for food applications has evolved drastically, including the development of novel approaches for deamidation, such as protein-glutaminase and ion exchange resin, and their practices in new protein substrate. Thanks to deamidation, enhanced functionalities of food proteins from cereals, legumes, milk, oil seeds and others, and thereby their processabilities as food ingredients have been achieved. Moreover, deamidated proteins have been used to fabricate engineered food colloids, including self-assembled protein particles, protein-metallic complexes, and protein-carbohydrate complexes, which have demonstrated tailored physicochemical properties to modulate oral perception, improve gastrointestinal digestion and bioavailability, and protect and/or deliver bioactive nutrients. Novel bioactivity, altered digestibility, and varied allergenicity of deamidated proteins are increasingly recognized. Therefore, deamidated proteins with novel techno-functional and biological properties hold both promise and challenges for future food applications, and a comprehensive review on this area is critically needed to update our knowledge and provide a better understanding on the protein deamidation and its emerging applications.

Freezing kinetics and microstructure of ice cream from high-pressure-jet processing of ice cream mix

The effect of high-pressure-jet (HPJ) processing (0-500 MPa) on low-fat (6% fat) ice cream was studied by evaluating physiochemical properties before freezing, during dynamic freezing, and after hardening. An HPJ treatment ≥400 MPa decreased the density, increased the apparent size of colloidal particles, and altered rheological behavior (increased non-Newtonian behavior and consistency coefficients) of low-fat ice cream mix before freezing. During dynamic freezing, the particle size and consistency coefficient decreased but remained higher in 400 MPa-treated samples vs. non-HPJ-treated controls at the conclusion of freezing. The resulting ice creams (400 and 500 MPa-treated) had similar hardness values (3,372 ± 25 and 3,825 ± 14 g) and increased melting rates (2.91 ± 0.13 and 2.61 ± 0.31 g/min) compared with a control sample containing polysorbate 80 (3,887 ± 2 and 1.62 ± 0.25 g/min). Visualization of ice cream samples using transmission electron microscopy provided evidence of casein micelle and fat droplet disruption by HPJ treatment ≥400 MPa. In the 400 MPa-treated samples, a unique microstructure consisting of dispersed protein congregated around coalesced fat globules likely contributed to the altered physiochemical properties of this ice cream. High-pressure-jet processing can alter the microstructure, rheological properties, and hardness of a low-fat ice cream, and further modification of the formulation and processing parameters may allow the development of products with enhanced properties.

Phosvitin-wheat gluten complex catalyzed by transglutaminase in the presence of Na2SO3: Formation, cross-link behavior and emulsifying properties

Phosvitin (PSV) is considered as a good emulsifier, although it has a low proportion of hydrophobic regions and steric hindrance. Wheat gluten (WG) possesses excellent hydrophobicity and macromolecular network structure. In this work, WG was subjected to a series of Na₂SO₃ solution, followed by cross-linking with PSV under transglutaminase (TGase) catalyzation. The results showed that Na₂SO₃ could break disulfide bonds of WG and increase its solubility from 7.33% to 42.82% with 1200 mg/L of Na₂SO₃. Correspondingly, the cross-linking degree was significantly enhanced. Compared to PSV, the cross-linked PSV-WG exhibited a higher surface hydrophobicity and thermal stability, with a lower zeta potential and apparent viscosity. The emulsifying activity of PSV-WG reached 17.42, 20.63 and 20.28 m²/g with Na₂SO₃ concentration of 300, 600 and 900 mg/L, which were all higher than that of PSV (15.19 m²/g). This work provided a novel strategy to elevate emulsifying properties of PSV by cross-link reaction.

Effect of high-pressure-jet processing on the physiochemical properties of low-fat ice cream mix

The objective of this study was to use high-pressure-jet (HPJ) processing to produce functional properties in a low-fat (4.5% fat) ice cream mix similar to those seen when emulsifiers are used. Ice cream mix or serum (nonfat portion of the ice cream mix) were subjected to 200 or 400 MPa HPJ processing and compared with a non-HPJ-treated control. A similar non-HPJ-treated formulation but containing polysorbate 80 (0.075% wt/wt) was also used as a control. The mix samples were characterized in terms of their particle size, density, flow properties, stability, crystallization kinetics, and fat-protein interactions. The sample from the mix subjected to 400 MPa HPJ processing (HPJ-M-400) had increased consistency coefficient (5°C; 228 ± 102.7 mPa·s) and particle size (D[4,3]; 16.0 ± 2.5 μm) compared with the non-HPJ-treated control sample, with viscosity and particle size (volume-moment mean diameter, D[4,3]) values of 7.5 ± 0.4 mPa·s and 0.50 ± 0.1 μm, respectively. These differences were attributed to an increase in casein-fat interactions and casein-casein interactions caused by the 400 MPa HPJ treatment, which were observed using confocal scanning laser microscopy and inferred from an increase in protein and fat concentrations in the sediment after ultracentrifugation. Interestingly, the density of HPJ-M-400 was also lower (0.79 ± 0.17 g/mL) than that of the control (1.04 ± 0.00 g/mL) because bubbles were trapped within these complexes. The large casein-fat complexes formed in the HPJ-M-400 sample also appeared to act as steric barriers that slowed ice crystal growth during quiescent freezing. The alterations in physiochemical properties and apparent ice crystal growth induced by the 400 MPa treatment of low-fat ice cream mix have many potential applications, including clean-label confections.