Fabrication and characterisation of metal-doped pectin films

Tuning the mechanical properties of pectin films with polyphenol-rich plant extracts

The mechanical properties of pectin films enhanced with polyphenol-rich fruit extracts were investigated. The scavenging and reducing activity of plant extracts incorporated into the pectin films were determined using bench assays, and their antioxidant activity was correlated with a high presence of polyphenols, which were predominantly comprised of flavonoids and anthocyanins. The pectin films generated from the extracts exhibited a range of mechanical properties; tensile strength (4.99 MPa - 6.91 MPa), elongation at break (45.8 % - 52.3 %), and stiffness (1835 g mm-1 - 2765 g mm-1). To investigate the underlying relationships between plant extract composition and mechanical properties, Projection to Latent Structures (PLS) models were developed. The PLS models revealed that extracts containing high sugar and polyphenol content increase the tensile strength and moisture content of films. The elongation at break of the films was improved or diminished depending on the profile of sugar, acids, and polyphenols in the fruit extracts. Furthermore, the structures and concentration of anthocyanins and flavonoids were identified to strongly influenced the elongation at break differences. By modifying the concentration of sugars, organic acids, and polyphenols, the mechanical properties of pectin-based films can be tuned for tailored applications as food packaging materials.

Impact of light-activated curcumin and curcuminoids films for catheters decontamination

BACKGROUND

Biofilms are microbial communities protected by an extra polymeric matrix, which promotes a defense against antimicrobial agents. Cells attached in surfaces and promote infections. Photodynamic inactivation (PDI) is one of the strategies to eliminate infections due to the facility of use and the absence of resistance by bacteria. The study combines formulation with curcuminoids and with Photogem^(R), illuminating them with 450 nm and 630 nm, respectively.

METHODS

Films were prepared with pectin, glycerin, Sodium Lauryl Sulfate, curcumin, curcuminoids, or Photogem^(R) (0.75; 0.75 mg/mL and 0.03 mg/mL respectively). Bacterial biofilms were formed during 3, 4, or 7 days on catheters and illumination with LED devices at 450 nm and 630 nm.

RESULTS

The best PDI applied in S. aureus 7-days biofilm with curcuminoid film. Photogem film was the best strategy for PDI in E. coli 7-day biofilm. Curcumin film promoted similar results with S. aureus and E. coli. Light penetration demonstrated a similar decreased exponential curve along the increase of thickness of biofilm.

CONCLUSION

Curcuminoids, curcumin and Photogem® show efficient solubilization and availability in formulation with relevant results in PDI. S aureus biofilms were more susceptible to curcuminoid film. E coli biofilms were more susceptible to Photogem film.

Influence of cations, pH and dispersed phases on pectin emulsification properties

The cooperativity of six cations (Ca²⁺, Mg²⁺, Zn²⁺, Al³⁺, Cr³⁺ and Fe³⁺), three pectins (sugar beet, high and low methyl esterified), three dispersed phases (medium chain triglycerides (MCT), orange oil and hexadecane), time (30 days) and pH (2.0 and 6.0) has been investigated in the formation and stability against coarsening of oil-in-water emulsions. Cations generally influenced emulsion stability in the following order (most stable) Ca²⁺ ​> ​Mg²⁺ ​> ​Al³⁺ ​> ​Cr³⁺ ​> ​Zn²⁺ ​> ​Fe³⁺ (least stable). This order largely coincided with that of the strength of pectin-cation interactions showing that the higher the affinity of cation for pectin the less stable the emulsion. More stable emulsions were formed with sugar beet pectin, which was also unresponsive to the presence of cations, followed by high- and then low-methyl esterified samples. At pH 2.0 all pectins showed their best emulsification performance whereas shifting pH to 6.0 severely impaired emulsification capacity and longer term stability against droplet growth. Smaller droplets were created with hexadecane under all conditions studied followed by MCT and orange oil in agreement with their aqueous solubilities. The present results advance our understanding of the stabilisation of emulsions using pectin and allow us to tailor their functionality for applications in food, pharmaceutical and biomedical industries.

•

Cations influence stability in the order: Ca²⁺ ​> ​Mg²⁺ ​> ​Al³⁺ ​> ​Cr³⁺ ​> ​Zn²⁺ ​> ​Fe³⁺.

•

Pectins showed best emulsification performance at pH 2.0

•

Pectins showed poor emulsification performance at pH 6.0

•

Pectin stability order: sugar beet ​> ​high methoxy ​> ​low methoxy pectin.

•

Oil stability order at pH 2.0: hexadecane ​< ​medium chain triglycerides ​< ​orange oil.

Pectin-Based Films with Cocoa Bean Shell Waste Extract and ZnO/Zn-NPs with Enhanced Oxygen Barrier, Ultraviolet Screen and Photocatalytic Properties

In this work, pectin-based active films with a cocoa bean shell extract, obtained after waste valorisation of residues coming from the chocolate production process, and zinc oxide/zinc nanoparticles (ZnO/Zn-NPs) at different concentrations, were obtained by casting. The effect of the active additive incorporation on the thermal, barrier, structural, morphological and optical properties was investigated. Moreover, the photocatalytic properties of the obtained films based on the decomposition of methylene blue (MB) in aqueous solution at room temperature were also studied. A significant increase in thermal and oxidative stability was obtained with the incorporation of 3 wt% of ZnO/Zn-NPs compared to the control film. The addition of 5 wt% cocoa bean shell extract to pectin significantly affected the oxygen barrier properties due to a plasticizing effect. In contrast, the addition of ZnO/Zn-NPs at 1 wt% to pectin caused a decrease in oxygen transmission rate per film thickness (OTR.e) values of approximately 50% compared to the control film, resulting in an enhanced protection against oxidation for food preservation. The optical properties were highly influenced by the incorporation of the natural extract but this effect was mitigated when nanoparticles were also incorporated into pectin-based films. The addition of the extract and nanoparticles resulted in a clear improvement (by 98%) in UV barrier properties, which could be important for packaged food sensitive to UV radiation. Finally, the photocatalytic activity of the developed films containing nanoparticles was demonstrated, showing photodegradation efficiency values of nearly 90% after 60 min at 3 wt% of ZnO/Zn-NPs loading. In conclusion, the obtained pectin-based bionanocomposites with cocoa bean shell waste extract and zinc oxide/zinc nanoparticles showed great potential to be used as active packaging for food preservation.