Dilatational rheological and nuclear magnetic resonance characterization of oil-water interface: Impact of pH on interaction of soy protein isolated and soy hull polysaccharides

Interfacial engineering of Pickering emulsions stabilized by pea protein-alginate microgels for encapsulation of hydrophobic bioactives

This study aims to investigate the effects of interfacial layer composition and structure on the formation, physicochemical properties and stability of Pickering emulsions. Interfacial layers were formed using pea protein isolate (PPI), PPI microgel particles (PPIMP), a mixture of PPIMP and sodium alginate (PPIMP-SA), or PPIMP-SA conjugate. The encapsulation and protective effects on different hydrophobic bioactives were then evaluated within these Pickering emulsions. The results demonstrated that the PPIMP-SA conjugate formed thick and robust interfacial layers around the oil droplet surfaces, which increased the resistance of the emulsion to coalescence, creaming, and environmental stresses, including heating, light exposure, and freezing-thawing cycle. Additionally, the emulsion stabilized by the PPIMP-SA conjugate significantly improved the photothermal stability of hydrophobic bioactives, retaining a higher percentage of their original content compared to those in non-encapsulated forms. Overall, the novel protein microgels and the conjugate developed in this study have great potential for improving the physicochemical stability of emulsified foods.

Effects of compound emulsifiers on the characteristics and stability of nano-emulsions from pollock bones

To improve the stability of pollock bone broth, compound emulsifiers were employed and evaluated in nano-emulsions from pollock bones (PBNs). The microstructure, creaming index, particle size, zeta potential, and viscosity of PBNs were characterized and the stability of PBNs was investigated. It revealed that the concentration of compound emulsifiers is one of the principal factors for particle size, zeta potential, and viscosity of PBNs, and 0.9% of sodium caseinate and sucrose fatty acid ester (CS-SE) can make the PBN display good stability. Its particle size changed from 81.17 ± 1.33 nm to 19.62 ± 0.21 nm when the temperature ranged from 40 °C to 80 °C, and its creaming index could reach a maximum (90.83%) among all PBNs in 4 months of freeze-thaw assays. PBN stability could be improved by the compound emulsifier (CS-SE), which offers a theoretical basis for the application of pollock bone broth.

Synergistic stabilization of a menthol Pickering emulsion by zein nanoparticles and starch nanocrystals: Preparation, structural characterization, and functional properties

A Pickering emulsion was synergistically stabilised with zein nanoparticles (ZNPs) and starch nanocrystals (SNCs) to prepare it for menthol loading. After response surface optimisation of the emulsion preparation conditions, a Pickering emulsion prepared with a ZNPs:SNCs ratio of 1:1, a particle concentration of 2 wt% and a water:oil ratio of 1:1 provided the highest menthol encapsulation rate of the emulsions tested (83%) with good storage stability within 30 days. We examined the bilayer interface structure of the emulsion by optical microscopy, scanning electron microscopy, and confocal laser scanning microscopy. The results of simulated digestion experiments showed that the release rate of free fatty acid was 75.06 ± 1.23%, which ensured bioavailability. At the same time, the emulsions facilitated the slow release of menthol. Bacteriostatic studies revealed that the Pickering emulsion had a protective effect on menthol, with the most significant inhibitory effects on Escherichia coli and Staphylococcus aureus under the same conditions. Overall, this study proposes a novel approach for the application and development of l-menthol by combining it with Pickering emulsion.

Formation mechanism of quinoa protein hydrolysate-EGCG complexes at different pH conditions and its effect on the protein hydrolysate-lipid co-oxidation in emulsions

This study aimed to investigate the interaction, structure, antioxidant, and emulsification properties of quinoa protein hydrolysate (QPH) complexes formed with (-)-epigallocatechin gallate (EGCG) at pH 3.0 and 7.0. Additionally, the effect of pH conditions and EGCG complexation on protein hydrolysate-lipid co-oxidation in QPH emulsions was explored. The results indicated that QPH primarily interacted with EGCG through hydrophobic interactions and hydrogen bonds. This interaction led to alterations in the secondary structure of QPH, as well as a decrease in surface hydrophobicity and free SH content. Notably, the binding affinity between QPH and EGCG was observed to be higher at pH 7.0 compared to pH 3.0. Consequently, QPH-EGCG complexes exhibited more significant enhancement in antioxidant and emulsification properties at pH 7.0 than pH 3.0. The pH level also influenced the droplet size, ζ-potential, and interfacial composition of emulsions formed by QPH and QPH-EGCG complexes. Compared to QPH stabilized emulsions, QPH-EGCG stabilized emulsions were more capable of mitigating destabilization during storage and displayed fewer lipid oxidation products, carbonyl generation, and sulfhydryl groups and fluorescence loss, which implied better oxidative stability of the emulsions. Furthermore, the QPH-EGCG complexes formed at pH 7.0 exhibited better inhibition of protein hydrolysate-lipid co-oxidation. Overall, these findings provide valuable insights into the potential application of QPH and its complexes with EGCG in food processing systems.

Acid-induced conformation regulation of peanut polysaccharide and its effect on stability and digestibility of oil-in-water emulsion

BACKGROUND

Developing the stable and healthy emulsion-based food is in accord with the needs of people for health. In the present study, acidification at pH 3.0 of peanut polysaccharide (APPSI) was employed to regulate its conformation and further improve its advantages in preparing oil-in-water emulsion.

RESULTS

The results indicated that acidification induced conversion of PPSI aggregates into linear chains. Increasing concentration promoted formation of cross-linked network structure shown in transmission electron microscopy images. Consequently, the viscosity, yield stress, storage modulus and flow activation energy significantly increased, further fabricating gel structure. Moreover, aggregation behavior suggested that more exposed proteins were involved in gel structure, thereby forming many hydrophobic cores as verified by fluorescence spectroscopy of pyrene. Afterwards, emulsion characteristics indicated that APPSI produced strong and thick steric hindrance around oil droplets and the coil-like interweaved chains locked the continuous phase, bringing strong elasticity and resistance to stress and creaming. Meanwhile, the lower fatty acid in APPSI-emulsion was released after simulated gastrointestinal digestion, mainly as a result of the high retention ratio of emulsion droplets. Furthermore, the elastic and viscous Lissajous curves suggested that the structure strength of APPSI-emulsion was similar to that of the salad dressing within the strain 53.22%.

CONCLUSION

The conformation of PPSI after acidification at pH 3.0 was suitable for preparing the stable emulsion. The obtained emulsion could resist digestion and maintain a strong structure, comprising a cholesterol-free and low-fat salad dressing substitute. © 2023 Society of Chemical Industry.

Effects of extraction methods on the physicochemical properties and functionalities of pectic polysaccharides from burdock (Arctium lappa L.)

In this work, the effects of four different extraction methods, acid (HCl), alkali (NaOH), enzymes (cellulase/pectinase), and buffer (pH 7.0) on the physicochemical properties and functionalities of burdock pectin were systematically investigated and compared. Buffer extraction gave a low yield (2.8 %) and is therefore limited in its application. The acid treatment hydrolyzed the neutral sidechains and gave a homogalacturonan content of 72.6 %. By contrast, alkali and enzymes preserved the sidechains while degrading the polygalacturonan backbone, creating a rhamnogalacturonan-I dominant structure. The branched structure, low molecular weight, and high degree of methylation (42.3 %) contributed to the interfacial adsorption, emulsifying capacity, and cellular antioxidant activity of the enzyme-extracted product. For the acid-extracted product, the strong intramolecular electrostatic repulsion restricted the formation of a contact interface to prevent coalescence of the emulsion. In addition, they did not have sufficient reducing ends to scavenge free radicals. Although a high branching size (5.0) was adopted, the low degree of methylation (19.5 %) affected the emulsifying capacity of the alkali-extracted products. These results provide useful information for pectic polysaccharides production with tailored properties.

Zein-yeast carboxymethyl glucan particles formed by anti-solvent precipitation for encapsulating resveratrol

In the work, zein-yeast carboxymethyl glucan (ZY) particles were fabricated by a novel ultrasonic assisted anti-solvent precipitation (ASP) method, which was a good delivery system for resveratrol. The particle size and zeta-potential of ZY samples were detected by Zetasizer Pro analyzer, they gradually increased as the mass ratio of zein and yeast carboxymethyl glucan (YCG) changed from 10:1 to 10:5. The intermolecular interactions were investigated by zeta-potentiometric analyzer, Fourier transform infrared spectroscopy and fluorescence spectroscopy. Electrostatic interaction, hydrogen bonding and hydrophobic effects between zein and YCG molecules were identified as the main driving forces in the formation of ZY particles. The optimized ZY (10:3) binary particles were used as delivery system for encapsulating and protecting resveratrol. They had high encapsulation efficiency (85.4 %) and loading capacity (6.1 %), and increased the retention rate of resveratrol by 2.10 and 1.21 folds after exposure to light and heat conditions, effectively protect resveratrol against light and thermal degradation. These particles also delayed the release of resveratrol in simulated gastrointestinal digestion, which might improve its oral bioavailability. In conclusion, ZY binary particles could be regarded as a useful and promising delivery vehicle, which might contribute to the application of hydrophobic bioactive ingredients in functional foods.

Study on the Stability Mechanism of Peanut OBs Extracted with the Aqueous Enzymatic Method

In this study, the internal relationships among oil bodies (OBs), the protein-phospholipid interactions in aqueous phase, oil-water interface behavior, and the stability of reconstituted OBs were analyzed from the bulk phase, interface, and macro perspectives, and the stability mechanism of OBs was discussed. OB proteins and phospholipids were combined through hydrophobic and electrostatic interactions, resulting in the stretching of protein conformation. OB proteins and phospholipids act synergistically to increase interface pressure and the rate of increase in interface pressure with relatively stable elastic behavior, which is beneficial to the formation and stability of interfacial films. When OBs were reconstituted by an OB protein-phospholipid complex system, phospholipids bound to OB proteins through hydrophobic and electrostatic interactions. OB proteins and phospholipids uniformly covered the oil droplet surface of reconstituted OBs to form a stable interfacial film, which maintained the stability of OBs. The addition of phospholipids significantly reduced the particle size of OBs prepared by OB proteins in a dose-dependent manner, and particle size decreased with the increase in phospholipid content (p < 0.05). Phospholipids increased the net surface charge, enhanced electrostatic repulsion, and improved the physicochemical stability of reconstituted OBs. The stability mechanism elucidated in this study provides a theoretical basis for the demulsification of peanut OBs.

Construction and characterization of Pickering emulsions stabilized by soy protein hydrolysate microgel particles and quercetin-loaded performance in vitro digestion

Food-grade Pickering emulsions stabilized by protein microgel particles have received increasing attentions owing to their potential applications in the food industry. Herein, soy protein hydrolysate microgel particles (SPHMs) produced at various pH (3, 5, 7, and 9) with and without ultrasonication were used to stabilize Pickering emulsions. Compared with those prepared using ultrasonication at pH 3-7, SPHMs prepared using ultrasonication at pH 9 showed excellent amphiphility at the oil-water interface and a superior ability to reduce interfacial tension. The Pickering emulsion stabilized by the latter SPHMs displayed a small particle size and a high net charge on the droplet surface, formed a dense honeycomb network interfacial layer with high viscoelasticity and adsorbed protein content, and experienced no visually detectable creaming during storage for 21 days, i.e., exhibited optimum colloidal stability. Furthermore, the above emulsion featured a quercetin encapsulation efficiency of 89.45 % and was capable of sustainable release, achieving a low free fatty acid release efficiency of 61 % and a relatively high quercetin bioaccessibility of 65 % in in vitro simulated digestion experiments. Thus, this work inspires the use of SPHMs in emulsion-based functional foods.

Esterified Soy Proteins with Enhanced Antibacterial Properties for the Stabilization of Nano-Emulsions under Acidic Conditions

Soy protein isolate (SPI), including β-conglycinin (7S) and glycinin (11S), generally have low solubility under weakly acidic conditions due to the pH closed to their isoelectric points (pIs), which has limited their application in acidic emulsions. Changing protein pI through modification by esterification could be a feasible way to solve this problem. This study aimed to obtain stable nano-emulsion with antibacterial properties under weakly acidic conditions by changing the pI of soy protein emulsifiers. Herein, the esterified soy protein isolate (MSPI), esterified β-conglycinin (M7S), and esterified glycinin (M11S) proteins were prepared. Then, pI, turbidimetric titration, Fourier transform infrared (FTIR) spectra, intrinsic fluorescence spectra, and emulsifying capacity of esterified protein were discussed. The droplet size, the ζ-potential, the stability, and the antibacterial properties of the esterified protein nano-emulsion were analyzed. The results revealed that the esterified proteins MSPI, M7S, and M11S had pIs, which were measured by ζ-potentials, as pH 10.4, 10.3, and 9.0, respectively, as compared to native proteins. All esterified-protein nano-emulsion samples showed a small mean particle size and good stability under weakly acidic conditions (pH 5.0), which was near the original pI of the soy protein. Moreover, the antibacterial experiments showed that the esterified protein-based nano-emulsion had an inhibitory effect on bacteria at pH 5.0.

The droplet breakup model and characteristics of pH-shifted peanut protein isolate-high methoxyl pectin stabilised emulsions under ultrasound

The effect of pH on the occurrence states of peanut protein isolate (PPI) and high methoxyl pectin (HMP), and droplet breakup model of the emulsions under ultrasound were studied. Particle size distribution and scanning electron microscopy results showed that PPI-HMP existed a soluble complex at pH 5.0, had no interaction at pH 7.0, and was co-soluble at pH 9.0. Droplet breakup model results revealed that the characteristics of emulsion stabilised by PPI-HMP treated at pH 5.0 was different from that at pH 7.0 and 9.0. The average diameter of the droplet well satisfied the model. According to rheological properties, interface tension, and microstructure, the formation mechanism and characteristics of emulsion stabilised by PPI-HMP treated at pH 5.0 was different from that at pH 7.0 and pH 9.0. The research provided a reference for constructing emulsions using pH-shifted PPI-HMP under ultrasound.

Characterization of bacterial cellulose nanofibers/soy protein isolate complex particles for Pickering emulsion gels: The effect of protein structure changes induced by pH

In this work, the influence of soy protein isolated at different pH values (1-9) on the self-assembly behaviors of bacterial cellulose nanofibers/soy protein isolate (BCNs/SPI) colloidal particles via anti-solvent precipitation were investigated. The results showed that the formation of BCNs/SPI at pH values of 1-5 was mainly driven by electrostatic interaction, while the formation of those at pH values of 5-9 was driven by weak molecular interactions including hydrogen bonding and steric-hindrance effect. The FTIR demonstrated that the conformation of protein involved a transition from order to disorder at the level of secondary structure as pH values were away from the isoelectric point. The fluorescence spectroscopy and UV-vis adsorption spectroscopy indicated that hydrophobic region of SPI at pH value of 5 displayed more exposed as compared with that at pH values away from the isoelectric point. The changes in structure conformation of SPI induced by pH values led to the changes in properties of the BCNs/SPI colloidal particles including particle size, microstructure, crystallinity, hydrophily, thermal stability, and rheological properties. Furthermore, the structures of BCNs/SPI colloidal particles at different pH values significantly affected the stability of Pickering emulsion gels stabilized by the corresponding complex colloidal particles. This study provided a theoretical basis for the design of food-grade Pickering emulsion gels stabilized by BCNs/SPI complex colloidal particles.

Multiscale combined techniques for evaluating emulsion stability: A critical review

Emulsions are multiscale and thermodynamically unstable systems which will undergo various unstable processes over time. The behavior of emulsifier molecules at the oil-water interface and the properties of the interfacial film are very important to the stability of the emulsion. In this paper, we mainly discussed the instability phenomena and mechanisms of emulsions, the effects of interfacial films on the long-term stability of emulsions and summarized a set of systematic multiscale combined methods for studying emulsion stability, including droplet size and distribution, zeta-potential, the continuous phase viscosity, adsorption mass and thickness of the interfacial film, interfacial dilatational rheology, interfacial shear rheology, particle tracking microrheology, visualization technologies of the interfacial film, molecular dynamics simulation and the quantitative evaluation methods of emulsion stability. This review provides the latest research progress and a set of systematic multiscale combined techniques and methods for researchers who are committed to the study of oil-water interface and emulsion stability. In addition, this review has important guiding significances for designing and customizing interfacial films with different properties, so as to obtain emulsion-based delivery systems with varying stability, oil digestibility and bioactive substance utilization.

Light-dimerization telechelic alginate-based amphiphiles reinforced Pickering emulsion for 3D printing

Functional Pickering emulsions that depend on the interparticle interactions hold promise for building template materials. A novel coumarin-grafting alginate-based amphiphilic telechelic macromolecules (ATMs) undergoing photo-dimerization enhanced particle-particle interactions and changed the self-assembly behavior in solutions. The influence of self-organization of polymeric particles on the droplet size, microtopography, interfacial adsorption and viscoelasticity of Pickering emulsions were further determined by multi-scale methodology. Results showed that stronger attractive interparticle interactions of ATMs (post-UV) endowed Pickering emulsion with small droplet size (16.8 μm), low interfacial tension (9.31 mN/m), thick interfacial film, high interfacial viscoelasticity and adsorption mass, and well stability. The high yield stress, outstanding extrudability (n₁ < 1), high structure maintainability, and well shape retention ability, makes them ideal inks for direct 3D printing without any additions. The ATMs provides an increased capacity to produce stable Pickering emulsions with tailoring their interfacial performances and, providing a platform for fabricating and developing alginate-based Pickering emulsion-templated materials.

Formation and stability of Pickering emulsion gels by insoluble soy peptide aggregates through hydrophobic modification

In this work, a highly stable food-grade Pickering emulsion gels was successfully prepared by hydrophobically modified insoluble soybean peptide aggregates. The relationships between the surface properties of insoluble soybean peptide aggregates and Pickering emulsion gels characteristics were clarified. After modification, the insoluble soybean peptide aggregates with high surface hydrophobicity had small particle size (377 nm), near-neutral wettability (θo/w = 92°) and strong interfacial adsorption capability. These allowed the modified insoluble soybean peptide aggregates to stabilize the oil-water interface and form continuous network surrounding oil droplets, leading to the formation of stable Pickering emulsion gels. Besides, Pickering emulsion gels prepared by insoluble soybean peptide aggregates with higher surface hydrophobicity had smaller droplet size and higher gel strength, and remained stable even after 60 days of storage. The findings suggest a preferable plant protein particle for the preparation of stable Pickering emulsion gels in food industry.

Pickering emulsions stabilized by β-cyclodextrin and cinnamaldehyde essential oil/β-cyclodextrin composite: A comparison study

Here, a cinnamaldehyde essential oil (CEO)/β-Cyclodextrin (β-CD) composite with a high embedding rate (91.74 ± 0.82%) was prepared. Its structure was characterized by Fourier transform infrared spectrometer (FT-IR) and X-ray diffractometer (XRD). Pickering emulsions prepared by β-CD and CEO/β-CD at different concentrations (1-5%) were comparatively investigated. The CEO/β-CD emulsions had better storage stability. Rheological results confirmed the emulsions were all gel-like elastic emulsions and had shear thinning phenomenon. Fluorescence microscopy and scanning electron microscopy (SEM) results confirmed that the most of excessive β-CD was adsorbed on the surface of emulsion droplets as crystals, formed thick protective shell in β-CD emulsions, while the most of excessive composites were distributed in the aqueous phase forming a stable network structure in CEO/β-CD emulsions. It caused these two emulsions had different rheological properties, and different changing trends in droplet size.

Protein-polysaccharide interactions for the fabrication of bioactive-loaded nanocarriers: Chemical conjugates and physical complexes

As unique biopolymeric architectures, covalently and electrostatically protein-polysaccharide (PRO-POL) systems can be utilized for bioactive delivery by virtue of their featured structures and unique physicochemical attributes. PRO-POL systems (i. e, microscopic /nano-dimensional multipolymer particles, molecularly conjugated vehicles, hydrogels/nanogels/oleogels/emulgels, biofunctional films, multilayer emulsion-based delivery systems, particles for Pickering emulsions, and multilayer coated liposomal nanocarriers) possess a number of outstanding attributes, like biocompatibility, biodegradability, and bioavailability with low toxicity that qualify them as powerful agents for the delivery of different bioactive ingredients. To take benefits from these systems, an in-depth understanding of the chemical conjugates and physical complexes of the PRO-POL systems is crucial. In this review, we offer a comprehensive study concerning the unique properties of covalently/electrostatically PRO-POL systems and introduce emerging platforms to fabricate relevant nanocarriers for encapsulation of bioactive components along with a subsequent sustained/controlled release.

Observation and Nursing of Adverse Reactions in Severe Patients with Enhanced MRI

In order to explore the observation and nursing of adverse reactions in severe patients with enhanced magnetic resonance imaging, a family nursing service model was proposed in patients with enhanced magnetic resonance imaging. 150 patients who underwent enhanced magnetic resonance imaging in a hospital were selected as the research objects. The patients were divided into two groups by random number table method. 75 patients in the control group received routine nursing intervention and 75 patients in the observation group received family nursing service intervention. The anxiety score, depression score, examination time, one-time success rate, comfort score, incidence of adverse reactions, excellent image quality rate and nursing satisfaction were compared between the two groups. The results showed that the anxiety score and depression score of the observation group were lower than those of the control group (P < 0.05), the examination time of the observation group was significantly shorter than that of the control group (P < 0.05), and the comfort score and one-time success rate of the observation group were significantly higher than those of the control group (P < 0.05). The incidence of adverse reactions was significantly lower than that in the control group (P < 0.05), the excellent and good image quality rate (95.00%) and nursing satisfaction (97.22%) were significantly higher than those in the control group (83.00%, 86.56%). This shows that the application effect of family nursing service mode in magnetic resonance enhanced scanning is remarkable. Therefore, the use of family care mode in MRI patient examination can effectively reduce patients' anxiety and depression scores, shorten examination time, reduce adverse reactions, improve the success rate of one-time examination, improve patients' comfort during examination and patients' evaluation of nursing services. The effect is ideal and worthy of clinical research and promotion.

Fabrication and emulsifying properties of non-covalent complexes between soy protein isolate fibrils and soy soluble polysaccharides

Non-covalent complexes (SPIF/SSPS) of soy protein isolate fibrils (SPIF) and soy soluble polysaccharides (SSPS) were fabricated and used to stabilize oil-in-water (O/W) emulsions. FT-IR spectroscopy and zeta potential results demonstrated that the interactions between SPIF and SSPS mainly include hydrogen bonding and electrostatic interactions. The presence of SSPS decreased the particle size and surface hydrophobicity of SPIF, resulting in a decrease and redshift of the fluorescence intensity. During the interfacial adsorption process, SPIF/SSPS complexes had lower diffusion and penetration rates compared with pure SPIF because of their hydrophilic region, but the molecular reorganization rate increased. Emulsions stabilized with the SPIF/SSPS complex at 5 : 5 (i.e., 1 : 1) ratio had both an excellent emulsifying activity index (EAI) of 26.17 m2 g-1 and an excellent emulsifying stability index (ESI) of 93.01%, as well as the smallest emulsion droplet particle size of 1.74 μm. Meanwhile, no flocculation was observed in this emulsion which is attributed to the sufficient steric stabilization provided by the hydrophilic SSPS. After three weeks of storage, there was no phase separation observed in the emulsions stabilized by SPIF/SSPS complexes in 5 : 4 and 5 : 5 ratios and the Turbiscan stability indices were 17.86 and 15.14, respectively, much lower than the other emulsion formulations tested.

Regulation mechanism of myofibrillar protein emulsification mode by adding psyllium (Plantago ovata) husk

Psyllium husk (PH) is an excellent source of dietary fiber with strong water-absorption and viscosity. This work systemically investigated the regulation mechanism of myofibrillar protein (MP) emulsification mode by adding psyllium husk as composite emulsifiers to prepare O/W emulsions. The results showed that the physical stability of emulsions was improved by adding PH (0.1%-0.8%). The results of contact angle, interfacial tension and confocal laser scanning microscopy (CLSM) indicated that the stability mechanism of emulsions was affected by the addition of PH. At a low PH addition (0.1%), the adsorption of MP at the oil-water interface was enhanced, thus forming an elastic interfacial film that improves the stability of emulsions. However, when the PH addition increased to 0.8%, excess addition of pH even hindered the interfacial adsorption of MP. Notably, the pseudoplasticity and viscosity of emulsions increased due to the addition of PH, thus inhibiting the migration and aggregation of droplets.

Physicochemical Characterization of an Exopolysaccharide Produced by Lipomyces sp. and Investigation of Rheological and Interfacial Behavior

The present study aimed to evaluate the rheological and interfacial behaviors of a novel microbial exopolysaccharide fermented by L. starkeyi (LSEP). The structure of LSEP was measured by LC-MS, ¹H and ¹³C NMR spectra, and FT-IR. Results showed that the monosaccharide composition of LSEP was D-mannose (8.53%), D-glucose (79.25%), D-galactose (7.15%), and L-arabinose (5.07%); there existed the anomeric proton of α-configuration and the anomeric carbon of α- and β-configuration; there appeared the characteristic absorption peak of the phosphate ester bond. The molecular weight of LSEP was 401.8 kDa. The water holding capacity (WHC, 2.10 g/g) and oil holding capacity (OHC, 12.89 g/g) were also evaluated. The results of rheological properties showed that the aqueous solution of LSEP was a non-Newtonian fluid, exhibiting the shear-thinning characteristics. The adsorption of LSEP can reduce the interfacial tension (11.64 mN/m) well and form an elastic interface layer at the MCT–water interface. Such functional properties make LSEP a good candidate for use as thickener, gelling agent, and emulsifier to form long-term emulsions for food, pharmaceutical, and cosmetic products.

Characterization of the structure and properties of the isolating interfacial layer of oil-water emulsions stabilized by soy hull polysaccharide: Effect of pH changes

The effect of pH on the microstructure and properties of the soy hull polysaccharide interfacial layer was determined. The particle size at pH 2.0 was the largest (36.7 μm), whereas the absolute ζ-potential was the smallest. The protein content was the lowest at pH 2.0 and 9.0 and peaked around pH 4.0-5.0 (77.7%). The ordered secondary protein structure content under low pH conditions was greater than that under high pH conditions and the stability of the interfacial layer was higher at high pH, whereas the emulsion viscosity decreased by two orders of magnitude between pH 2.0 and 9.0. It appears that low pH reduced the thermal stability and increased the apparent viscosity of the emulsion by increasing the structural order of the protein in the interfacial layer. These findings lay the foundation for future work to reveal the key components and characteristic structures of soy hull polysaccharide that affect interfacial stability.

Investigation on the interaction of acrylamide with soy protein isolate: Exploring the binding mechanism in vitro

Acrylamide (AA), which is a carcinogen in humans, has been a research focus in terms of food risk assessment. However, few published studies have explored protein strategies to reduce the health risks of AA. The objective of this study was to investigate the binding of AA with soy protein isolate (SPI) and elucidate the binding mechanism. The results showed that AA could bind with nontreated, heat-treated, high-pressure homogenization-treated, and ultrasound-treated SPI in vitro. Fourier-transform infrared spectroscopy suggested that secondary structure of SPI changed significantly after binding with AA in the nontreated and different treated groups. Moreover, fluorescence quenching experiments suggested that the quenching of SPI by AA was static quenching and hydrogen bonds, hydrophobic interactions, and van der Waals forces were involved in this process. PRACTICAL APPLICATION: The study of SPI and AA binding could provide a new perspective for reducing the bioaccessibility of AA in human body by using protein. The results showed that SPI could potentially be used as a novel health strategy to reduce the harm of AA in the human body.

Interfacial dilatational and emulsifying properties of ultrasound-treated pea protein

In this study, the structural, interfacial, and emulsifying properties of high-intensity ultrasound (HUS)-treated pea protein isolate (PPI_US) were investigated. HUS at 50% amplitude and 57-60 W·cm^-2 for 5 min markedly improved protein solubility (by 132%), surface hydrophobicity (by 173%), and reduced particle size (by 52%). These physicochemical changes in PPI_US led to more rapid protein adsorption at the oil-water interface, improved emulsifying activity (by 18-27%) and capacity (by 11%), and enhanced emulsion physical stability. The multilayer nature, albeit less elastic, of the interfacial membrane formed by PPI_US when compared to control protein (PPI_C), based on dilatational testing, contributed to the above results. Moreover, PPI_US-stabilized emulsions exhibited a tendency of being less susceptible to lipid oxidation during storage. Thus, structure-modifying HUS may be a valuable processing technology for the manufacture of pea protein-based emulsion foods.

Soy/whey protein isolates: interfacial properties and effects on the stability of oil-in-water emulsions

BACKGROUND

The adsorption of proteins at oil/water interfaces can reduce interfacial tension and increase emulsion stability. However, emulsions stabilized by soy protein isolate (SPI) are not sufficiently stable. Using SPI as a control, a theoretical basis for the adsorption behavior of mixed SPI and whey protein isolate (WPI) at the oil/water interface was established and the effects of the protein ratio and content on the emulsion stability were studied.

RESULTS

Compared to SPI solution, SPI-WPI mixed solutions were found to reduce the size distribution of emulsion droplets and significantly improve the emulsion stability. Among the studied protein contents and ratios, the protein content of 0.2 g kg^-1 and SPI/WPI mass ratio of 1:9 offered the lowest creaming stability index (15%), the smallest droplet size (278 nm), and the largest absolute value ζ-potential (35 mV), i.e. the emulsion stability was excellent. The largest dilatational modulus (10.08 mN m^-1 ), dilatational elasticity (10.01 mN m^-1 ), and dilatational viscosity (1.18 mN m^-1 ), were observed with a protein content of 0.15 g kg^-1 (SPI/WPI ratio of 1:9), along with a high interfacial protein adsorption capacity (47.33%). SPI-WPI complexes form a thick adsorption layer around oil droplets, resulting in an increase of the expansion modulus of the interfacial layer.

CONCLUSION

SPI-WPI complexes can form a thick adsorption layer around oil droplets, resulting in increased expansion modulus of the interfacial layer, which improves emulsion stability. © 2020 Society of Chemical Industry.