Suitability of β-lactoglobulin micro- and nanostructures for loading and release of bioactive compounds

Assessment of In Vitro Release Testing Methods for Colloidal Drug Carriers: The Lack of Standardized Protocols

Although colloidal carriers have been in the pipeline for nearly four decades, standardized methods for testing their drug-release properties remain to be established in pharmacopeias. The in vitro assessment of drug release from these colloidal carriers is one of the most important parameters in the development and quality control of drug-loaded nano- and microcarriers. This lack of standardized protocols occurs due to the difficulties encountered in separating the released drug from the encapsulated one. This review aims to compare the most frequent types of release testing methods (i.e., membrane diffusion techniques, sample and separate methods and in situ detection techniques) in terms of the advantages and disadvantages of each one and of the key parameters that influence drug release in each case.

Inhibitory mechanism of carboxymethyl chitosan-lotus seedpod oligomeric procyanidin nanoparticles on dietary advanced glycation end products released from glycated casein during digestion

Lotus seedpod oligomeric procyanidins (LSOPC) are potent inhibitors of advanced glycation end products (AGEs), whose gastrointestinal susceptibility to degradation limits their use in vivo. In this study, carboxymethyl chitosan-lotus seedpod oligomeric procyanidin nanoparticles (CMC-LSOPC NPs) were constructed with a binding ratio of 1:6.51. CMC-LSOPC NPs significantly inhibited the release of AGEs from glycated casein (G-CS) during digestion, increasing the inhibition rate by 25.76% in the gastric phase and by 14.33% in the intestinal phase compared with LSOPC alone. To further investigate the inhibition mechanism, fluorescence microscopy, scanning electron microscopy and FTIR were used to find that CMC-LSOPC NPs could form cohesions to encapsulate G-CS in the gastric phase and hinder G-CS hydrolysis. In the intestinal phase, LSOPC was targeted for release and bound to trypsin through hydrophobic interactions and hydrogen bonding, resulting in protein peptide chain rearrangement, changes in secondary structure and significant reduction in trypsin activity. In addition, CMC-LSOPC NPs increased the antioxidant capacity of digestive fluid and could reduce the oxidative stress in the gastrointestinal tract caused by the release of AGEs. It's the first time that CMC-LSOPC NPs were constructed to enhance the stability of LSOPC during digestion and explain the mechanism by which CMC-LSOPC NPs inhibit the release of AGEs from G-CS in both stomach and intestine. This finding will present a novel approach for reducing AGEs during gastrointestinal digestion.

Combination of α-lactalbumin and gum Arabic for microencapsulation of L-menthol: The effects on flavor release during storage and rehydration

L-menthol-containing food products generally show the flavor loss during storage due to their high volatility. The hydrophobicity of L-menthol also causes the inadequate flavor release during rehydration. In this study, the stability of L-menthol was enhanced by microencapsulation and the effect of different powder drying techniques was also investigated. The highest efficiency (76.58-78.66 %) and loading content (18.58-28.35 mg/g) of encapsulations were obtained by using a mass ratio of 2:1(α-LA: GA). Then they were dried by non-thermal spray freeze drying (SFD) technique compared to spray drying (SD) and freeze-drying (FD) process. The SFD particles were shown to be spherical and porous with the highest porosity (86.82 %). α-LA/GA based microparticles with spherical shapes were demonstrated to largely enhance flavor retention during high humidity storage. In addition, the porous structures of SFD powders could cause rapid rehydration in liquid models, and the release behaviors of loaded L-menthol followed the Fickian diffusion. Consequently, the SFD technique shows great potential to produce microparticles by regulating the release behaviors of L-menthol during storage and rehydration.

The effects of β-lactoglobulin on cyanidin-3-O-glucoside antioxidant activity and bioaccessibility after heat treatment

The impact of heat treatment at different temperatures on the interaction of β-lactoglobulin (β-Lg) and anthocyanin-3-O-glucoside (C3G) was studied. Heat treatment and the addition of C3G changed the secondary structure of β-Lg with decreasing β-sheets and increasing random coils. Interactions between C3G and β-Lg were mainly via hydrogen bonds and van der Waals forces at 25 °C. The elevated temperature promoted hydrophobic interactions between C3G and β-Lg due to an increase in the hydrophobic groups and amino groups on the surface of β-Lg molecules. The addition of β-Lg to the C3G eliminated heat-induced thermal degradation of C3G. The β-Lg-C3G interactions accompanied with increased particle size and constant zeta potential could increase the antioxidant capacity of C3G approximately by 4% to 10% and protect the colour of C3G from degradation under heat treatment. The C3G bioaccessibility with β-Lg addition increased by 26.08%, 33.45%, 83.09%, 72.27%, and 354.62% compared with C-25, C-60, C-85, C-100, and C-121, respectively. The protective effect of the non-covalent interactions on C3G at high temperatures (85 °C to 121 °C) was significantly stronger than at 25 °C and 60 °C. The application of β-Lg in foodstuffs could enhance the antioxidant activity and bioaccessibility of C3G.

Experimental and computational studies on the mechanism of the β-lactoglobulin-derived peptide inhibiting the antigenicity of β-lactoglobulin

In this study, through a combined simulated enzymolysis-molecular docking-molecular simulation-activity determination-action mechanism strategy, we screened a β-LG-derived peptide (VAGTWYSL) to inhibit the antigenicity of β-LG and explored its mechanism of action. Our results indicate that the inhibitory effect of the peptide on the antigenicity of β-LG is affected by different experimental conditions, including pH, reaction time and concentration. Three factors may contribute to the reduced allergenicity of β-LG. First, there must be sufficient forces between the peptide and β-LG, as a result, hydrophobic forces and hydrogen bonds are the main forces to maintain the structural stability of the complex. Second, the binding of the peptide changes the secondary structure of β-LG, especially with an increase in α-helices and a decrease in β-turns. Third, the peptide binds to the hydrophobic region of β-LG, involving the antigenic epitope region Val41-Lys60, which may reduce the antigenicity.

pH-Dependent complexation between β-lactoglobulin and lycopene: Multi-spectroscopy, molecular docking and dynamic simulation study

This study aims to investigate the effect of pH levels (pH 7.0 and pH 8.1) on binding ability of β-lactoglobulin (β-LG) with lycopene (LYC) and elucidate interaction mechanisms using multi-spectroscopy and molecular docking study. β-LG at pH 8.1 showed a stronger binding affinity to lycopene than that at pH 7.0 according to binding constant, binding number, energy transfer efficiency, and surface hydrophobicity. Lycopene bound to protein mainly by van der Waals force in the form of static quenching mode and preferred to interact with β-LG at the top of barrel for both pH levels. Molecular dynamic simulation revealed that β-LG/LYC complex at pH 8.1 was more stable than at pH 7.0. β-LG/LYC complexes formed at pH 8.1 showed significantly higher ABTS radical scavenging activity than samples at pH 7.0 (p < 0.05). Data obtained may contribute valuable information for preparing a whey protein-based delivery system for lycopene.

Characterization of interactions between whey protein isolate and hyaluronic acid in aqueous solution: Effects of pH and mixing ratio

Interactions between whey protein isolate (WPI) and hyaluronic acid (HA) were characterized as functions of pH (6.0-1.0) and protein to polysaccharide ratio (R, 1:4-10:1). Intramolecular soluble complexes formed at pH_c of 5.6-5.8, followed by intermolecular insoluble complexes formed at pH_Φ1 of 4.4-4.6. Complexes at ratios below 4:1 reached maximum optical value at pH 2.4 while samples above 4:1 peaked at pH 3-3.4 then precipitated. WPI/HA coacervates completely dissociated into soluble complex at pH 1.6-1.8 (pH_Φ2). WPI/HA mixtures showed shear thinning behavior and elastic property. Whey protein underwent significant α-helix structure change when interacting with HA in range of pH_Φ1>pH > pH_Φ2 and at low R values (1:4 and 1:2). Scanning electronic microscope (SEM) pictures showed pH and mixing ratio dependent microstructural changes corresponding with phase transition. Data may provide helpful information for further application of WPI/HA complexes in medical, food and cosmetic fields.

Characterization, techno-functional properties, and encapsulation efficiency of self-assembled β-lactoglobulin nanostructures

Whey is a cheese co-product with high protein content used in the food industry due to its techno-functional properties and nutritive value. This study aims to optimize the production of β-lactoglobulin (β-lg) nanostructures, to characterize their techno-functional properties and stability, and to apply them as a carrier of bioactive molecules. Box-Behnken planning was applied to determine the best conditions to obtain the β-lg nanostructure, which consists in treatment at 100 °C in NaCl 50 mmol·L^-1 for 60 min. TEM analysis showed a fibril structure in the observed nanostructures. The nanostructured systems formed foam and emulsion with higher stability than the systems composed of the native protein. The results for encapsulation efficiency of bioactive compounds were 96.50%, 89.04%, 67.78%, and 36.39% for quercetin, rutin, naringin, and vitamin B_2, respectively. Thus, β-lg nanostructure's great capacity to encapsulate hydrophobic molecules was verified.

Isolation and Self-Association Studies of Beta-Lactoglobulin

The aim of this study was to investigate isolated β-lactoglobulin (β-LG) from the whey protein isolate (WPI) solution using the column chromatography with SP Sephadex. The physicochemical characterization (self-association, the pH stability in various salt solutions, the identification of oligomeric forms) of the protein obtained have been carried out. The electrophoretically pure β-LG fraction was obtained at pH 4.8. The fraction was characterized by the matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF/TOF MS) technique. The use of the HCCA matrix indicated the presence of oligomeric β-LG forms, while the SA and DHB matrices enabled the differentiation of A and B isoforms in the sample. The impact of sodium chloride, potassium chloride, ammonium sulfate, and sodium citrate in dispersion medium on β-LG electrophoretic stability in solution was also studied. Type of the dispersion medium led to the changes in the isoelectric point of protein. Sodium citrate stabilizes protein in comparison to ammonium sulfate. Additionally, the potential of capillary electrophoresis (CE) with UV detection using bare fused capillary to monitor β-LG oligomerization was discussed. Obtained CE data were further compared by the asymmetric flow field flow fractionation coupled with the multi-angle light scattering detector (AF4-MALS). It was shown that the β-LG is a monomer at pH 3.0, dimer at pH 7.0. At pH 5.0 (near the isoelectric point), oligomers with structures from dimeric to octameric are formed. However, the appearance of the oligomers equilibrium is dependent on the concentration of protein. The higher quantity of protein leads to the formation of the octamer. The far UV circular dichroism (CD) spectra carried out at pH 3.0, 5.0, and 7.0 confirmed that β-sheet conformation is dominant at pH 3.0, 5.0, while at pH 7.0, this conformation is approximately in the same quantity as α-helix and random structures.

Bio-Based Nanoparticles as a Carrier of β-Carotene: Production, Characterisation and In Vitro Gastrointestinal Digestion

β-carotene loaded bio-based nanoparticles (NPs) were produced by the solvent-displacement method using two polymers: zein and ethylcellulose. The production of NPs was optimised through an experimental design and characterised in terms of average size and polydispersity index. The processing conditions that allowed to obtain NPs (<100 nm) were used for β-carotene encapsulation. Then β-carotene loaded NPs were characterised in terms of zeta potential and encapsulation efficiency. Transmission electron microscopy, Fourier transform infrared spectroscopy and X-ray diffraction analysis were performed for further morphological and chemical characterisation. In the end, a static in vitro digestion following the INFOGEST protocol was performed and the bioaccessibility of β-carotene encapsulated in both NPs was determined. Results show that the best conditions for a size-controlled production with a narrow size distribution are lower polymer concentrations and higher antisolvent concentrations. The encapsulation of β-carotene in ethylcellulose NPs resulted in nanoparticles with a mean average size of 60 ± 9 nm and encapsulation efficiency of 74 ± 2%. β-carotene loaded zein-based NPs resulted in a mean size of 83 ± 8 nm and encapsulation efficiency of 93 ± 4%. Results obtained from the in vitro digestion showed that β-carotene bioaccessibility when encapsulated in zein NPs is 37 ± 1%, which is higher than the value of 8.3 ± 0.1% obtained for the ethylcellulose NPs.