Interfacial properties and interaction between beer wort protein fractions and iso-humulone

Comparison of recombinant protein Z with natural protein Z derived from malt: From structure to functional properties

Protein Z (PZ) is a prominent albumin found in the endosperm of barley seeds with a molecular weight of approximately 40 kDa. Its multifaceted functional attributes, including trypsin- and thrombin-inhibiting bioactivities and superior foaming properties, have garnered significant attention in research. Considering the post-translational modifications of PZ natural in barley malt, we tried to express recombinant protein Z (rPZ) in E. coli. The present study aims to undertake a comparative analysis between natural PZ and rPZ in order to elucidate their respective characteristics. After spectral analysis, there are significant differences in their secondary and tertiary structures. In addition, rPZ showed superior foamability and foam stability. As for the serpin-like activity, the inhibition rate of rPZ is much higher than that of PZ. In contrast with the inhibition activity, the digestability of rPZ is much lower than that of PZ. As for the cargo carrier properties, rPZ showed an excellent ability to stabilize astaxanthin at 37 °C. These results suggest that rPZ is more suitable as protein carrier, due to the high foamability, serpin-like activity and low digestive stability, which not only give a brief view of recombinant protein, but also give a direction for PZ in cargo delivery.

Unlocking hot trub's potential: a simple method for extracting bitter acids and xanthohumol

BACKGROUND

Hot trub is a macronutrient- and micronutrient-rich by-product generated in the brewing industry, which is still underrated as a raw material for reprocessing purposes. In this context, this study aimed to investigate the extraction of bitter acids' and xanthohumol from hot trub as well as identify the significance of parameters for the process. The research assessed various extraction parameters, such as pH, ethanol concentration, temperature, and solid-to-liquid ratio, using a Plackett-Burman design.

RESULTS

Ethanol concentration and pH were the most significant parameters affecting extraction yield. β-acids were found to be the principal components of the bitter acids, with a maximum concentration near 16 mg g-1, followed by iso-α-acids and α-acids achieving 6 and 3.6 mg g-1, respectively. The highest yields of bitter acids were observed in the highest ethanol concentration, while pH was relevant to extraction process in treatments with low ethanol ratios. Concerning the xanthohumol extraction, the approach achieved maximum concentration (239 μg g-1) in treatments with ethanol concentration above 30%. Despite their variances, the phytochemicals exhibited comparable extraction patterns, indicating similar interactions with macromolecules. Moreover, the characterization of the solid residues demonstrated that the extraction process did not bring about any alterations to the chemical and total protein profiles.

CONCLUSION

Ethanol concentration was found to have the most significant impact on the extraction of bitter acids and xanthohumol, while temperature had no significant effect. The solid remains resulting from the extraction showed potential for use as a protein source. © 2024 Society of Chemical Industry.

A Review of N-Heterocycles: Mousy Off-Flavor in Sour Beer

Beer has over 600 flavor compounds and creates a positive tasting experience with acceptable sensory properties, which are essential for the best consumer experience. Spontaneous and mixed-culture fermentation beers, generally classified as sour beers, are gaining popularity compared to typical lager or ale styles, which have dominated in the USA for the last few decades. Unique and acceptable flavor compounds characterize sour beers, but some unfavorable aspects appear in conjunction. One such unfavorable flavor is called "mousy". This description is usually labeled as an unpleasant odor, identifying spoilage of fermented food and beverages. It is related as having the odor of mouse urine, cereal, corn tortilla chips, or freshly baked sour bread. The main compounds responsible for it are N-heterocyclic compounds: 2-acetyltetrahydropyridine, 2-acetyl-1-pyrroline, and 2-ethyltetrahydropyridine. The most common beverages associated with mousy off-flavor are identified in wines, sour beers, other grain-based beverages, and kombucha, which may contain heterofermentative lactic acid bacteria, acetic acid bacteria, and/or yeast/fungus cultures. In particular, the fungal species Brettanomyces bruxellensis are associated with mousy-off flavor occurrence in fermented beverages matrices. However, many factors for N-heterocycle formation are not well-understood. Currently, the research and development of mixed-cultured beer and non/low alcohol beverages (NABLAB) has increased to obtain the highest quality, sensory, functionality, and most notably safety standards, and also to meet consumers' demand for a balanced sourness in these beverages. This paper introduces mousy off-flavor expression in beers and beverages, which occurs in spontaneous or mixed-culture fermentations, with a focus on sour beers due to common inconsistency aspects in fermentation. We discuss and suggest possible pathways of mousy off-flavor development in the beer matrix, which also apply to other fermented beverages, including non/low alcohol drinks, e.g., kombucha and low/nonalcohol beers. Some precautions and modifications may prevent the occurrence of these off-flavor compounds in the beverage matrix: improving raw material quality, adjusting brewing processes, and using specific strains of yeast and bacteria that are less likely to produce the off-flavor. Conceivably, it is clear that spontaneous and mixed culture fermentation is gaining popularity in industrial, craft, and home brewing. The review discusses important elements to identify and understand metabolic pathways, following the prevention of spoilage targeted to off-flavor compounds development in beers and NABLABs.

Interactions between humulinone derived from aged hops and protein Z enhance the foamability and foam stability

Foam is one of the important characteristics of beer, including foamability, foam stability and foam texture. Protein Z (PZ) is considered to be an important component of beer foam. In this study, the interaction between PZ and humulinone, a widespread compound in aged hops, and the effect on foam properties of PZ were investigated. The fluorescence spectra showed that the stoichiometric ratio of humulinone to PZ was 4.25 ± 0.48: 1, and the binding constant was (1.64 ± 0.17) × 105 M-1. MD and FTIR results showed that the main force of interaction between PZ and humulinone was hydrogen bond, and the possible sites were Asn-37, Ser-292, Lys-290 and Pro-395. Moreover, the addition of humulinone greatly reduced the surface tension of PZ solution, and changed the secondary structure of PZ, which is beneficial for the foam stability. Under the influence of humulinone, the foamability, foam stability and foam texture of PZ all increased.

Addition of Hop (Humulus Lupulus L.) Bitter Acids Yields Modification of Malt Protein Aggregate Profiles during Wort Boiling

Hop bitter acids are used in the brewing industry to give beer bitterness. However, much of this bitterness is lost during processing, specifically during the wort boiling step. One of the major causes might be the interaction with protein-protein complexes. Therefore, the aim of this study was to clarify the role of hop bitter acids in protein aggregate formation using a proteomic approach. The effect of hop addition on protein composition was analyzed by liquid chromatography-mass spectrometry/MS (LC-MS/MS), and further analyses were performed to characterize the wort before and after boiling. Addition of hop bitter acids yielded a change in wort protein profiles, and hop bitter acids were found to bind primarily to less abundant proteins which are not related to beer quality traits, such as foam or haze. Wort protein aggregate profiles were revealed, and findings from this study suggested the precipitation of particular proteins in the aggregates during boiling when hops were added.

The Phenolic Compounds' Role in Beer from Various Adjuncts

BACKGROUND

The present article considers the influence of malt with various adjuncts on beer organic compounds and taste profile composition, with more attention paid to the phenol complex change. The topic under consideration is relevant since it studies the interactions of phenolic compounds with other biomolecules, and expands the understanding of the adjuncts organic compounds contribution and their joint effect on beer quality.

METHODS

Samples of beer were analyzed at a pilot brewery using barley and wheat malts, barley, rice, corn and wheat, and then fermented. The beer samples were assessed by industry-accepted methods and using instrumental analysis methods (high-performance liquid chromatography methods-HPLC). The obtained statistical data were processed by the Statistics program (Microsoft Corporation, Redmond, WA, USA, 2006).

RESULTS

The study showed that at the stage of hopped wort organic compounds structure formation, there is a clear correlation between the content of organic compounds and dry substances, including phenolic compounds (quercetin, catechins), as well as isomerized hop bitter resines. It is shown that the riboflavin content increases in all adjunct wort samples, and mostly with the use of rice-up to 4.33 mg/L, which is 9.4 times higher than the vitamin levels in malt wort. The melanoidin content in the samples was in the range of 125-225 mg/L and its levels in the wort with additives exceeded the malt wort. Changes in β-glucan and nitrogen with thiol groups during fermentation occurred with different dynamics and depending on the adjunct's proteome. The greatest decrease in non-starch polysaccharide content was observed in wheat beer and nitrogen with thiol groups content-in all other beer samples. The change in iso-α-humulone in all samples at the beginning of fermentation correlated with a decrease in original extract, and in the finished beer there was no correlation. The behavior of catechins, quercetin, and iso-α-humulone has been shown to correlate with nitrogen with thiol groups during fermentation. A strong correlation was shown between the change in iso-α-humulone and catechins, as well as riboflavin and quercetin. It was established that various phenolic compounds were involved in the formation of taste, structure, and antioxidant properties of beer in accordance with the structure of various grains, depending on the structure of its proteome.

CONCLUSIONS

The obtained experimental and mathematical dependences make it possible to expand the understanding of intermolecular interactions of beer organic compounds and take a step toward predicting the quality of beer at the stage of using adjuncts.

Variations in foam collapse and thin film stability with constant interfacial and bulk properties

The stability of foams is commonly linked to the interfacial properties of the proteins and other surfactants used. This study aimed to use these relationships to explain differences in foam stability observed among similar beer samples from different breweries. The foam stability was different for each sample (Nibem foam stability ranged from 206 to 300 s), but ranking was similar for all three foaming methods used, thus independent of the method, gas, etc. Differences in foam stability were dominated by differences in coalescence, as illustrated by the correlation with the stability of single bubbles and thin liquid films. The differences in coalescence stability could not be explained by the measured interfacial properties (e.g. surface pressure, adsorption rate, dilatational modulus and surface shear viscosity), or the bulk properties (concentration, pH, ionic strength, viscosity), since they were similar for all samples. The drainage rates and disjoining pressure isotherms measured in thin liquid films were also similar for all samples, further limiting the options to explain the differences in foam stability using known arguments. The differences in coalescence stability of the thin films was shown to depend on the liquid in between the adsorbed layers of the thin film, using a modified capillary cell to exchange this liquid (to a buffer, or one of the other samples). This illustrates the need to review our current understanding and to develop new methods both for experimental study and theoretical description, to better understand foam stability in the future.

The Influence of Biomolecule Composition on Colloidal Beer Structure

Recent studies have revealed an interest in the composition of beer biomolecules as a colloidal system and their influence on the formation of beer taste. The purpose of this research was to establish biochemical interactions between the biomolecules of plant-based raw materials of beer in order to understand the overall structure of beer as a complex system of bound biomolecules. Generally accepted methods of analytical research in the field of brewing, biochemistry and proteomics were used to solve the research objectives. The studies allowed us to establish the relationship between the grain and plant-based raw materials used, as well as the processing technologies and biomolecular profiles of beer. The qualitative profile of the distribution of protein compounds as a framework for the formation of a colloidal system and the role of carbohydrate dextrins and phenol compounds are given. This article provides information about the presence of biogenic compounds in the structure of beer that positively affect the functioning of the body. A critical assessment of the influence of some parameters on the completeness of beer taste by biomolecules is given. Conclusion: the conducted analytical studies allowed us to confirm the hypothesis about the nitrogen structure of beer and the relationship of other biomolecules with protein substances, and to identify the main factors affecting the distribution of biomolecules by fractions.

Interaction of proteins and amino acids with iso-α-acids during wort preparation in the brewhouse

This paper investigates the binding behavior of iso-α-acids from hops on free wort amino acids and proteins concerning the wort production process in breweries. The studies were carried out with different amino acids, bovine serum albumin and wort. To identify the nature of reaction between iso-α-acids and these substances, analyses of free amino nitrogen, HPLC and isothermal titration calorimetry were performed. According to the results, the iso-α-acids do not form covalent bonds with free amino acids of wort. However, iso-α-acids, especially isohumulone and isoadhumulone, form ionic bonds with wort proteins. A distinction must be made between proteins that are present in the hot trub, and those that are still dissolved in the hot wort. Proteins that are already coagulated and precipitated no longer react with iso-α-acids. Future experiments will investigate whether the established ionic bonds between iso-α-acids and proteins from the wort preparation process are maintained during fermentation until the finished beer or beer foam. If this is the case, which is induced by the experiments, there is a measurable loss of iso-α-acids in the hot wort, but at the same time, a gain for the later beer foam retention, as the iso-α-acids will stabilize it.

Toxicological and Epigenetic Studies of Two Types of Ale Beer, Tyrosol and Iso-Alpha Humulone

Although many benefits drawn from beer consumption are claimed, the epidemiological records are contradictory with respect to cancer prevention. The purpose of this study was to investigate the possible health-related activities involving genome safety and the ageing processes of two types of lyophilised ale beers (blond and stout), as well as two of their bioactive compounds (tyrosol and iso-alpha humulone). A multipurpose trial set of in vivo toxicity, antitoxicity, mutagenicity, antimutagenicity, lifespan and healthspan assays using Drosophila melanogaster were used. In parallel, several in vitro assays were designed using the cancer cell line HL-60 in order to establish the possible chemopreventive activity of the selected substances, where epigenetic modulation of DNA methylation changes, clastogenic activity and tumour cell inhibition growth were evaluated. The safety of the four substances was confirmed: lyophilised blond ale beer (LBAB), lyophilised stout ale beer (LSAB), tyrosol and iso-alpha humulone were neither toxic nor genotoxic. Moreover, all substances, except tyrosol, revealed the ability to protect individual genomes against oxidative radicals and to exert antimutagenic activity against the genotoxin hydrogen peroxide. With respect to the degenerative process indicators of lifespan and healthspan, tyrosol was the only compound that did not exert any influence on the life extension of Drosophila; LBAB induced a significant lifespan extension in D. melanogaster; LSAB and its distinctive compound iso-alpha humulone induced a reduction in longevity. The in vitro assays showed the cytotoxic activity of LBAB, LSAB and tyrosol against HL-60 cells. Moreover, proapoptotic DNA fragmentation or DNA strand breakage was observed for both types of beers and iso-alpha humulone at different concentrations. Furthermore, the lyophilised ale beers and tyrosol exhibited an increasing genome-wide methylation status, while iso-alpha humulone exhibited a demethylation status in repetitive cancer cell sequences. Although the biological activities assigned to beer consumption cannot be linked to any specific molecule/element due to the complexity of the phenolic profile, as well as the multifactor brewing process, the results obtained let us propose lyophilised ale beers as safe potential nutraceutical beverages when consumed in moderate amounts. The prevention of toxicity and genetic oxidative damage, as well as the induction of tumor cell death and modulation of the methylation status, are the key activities of beer that were shown in the present research.

Perspectives on protein biopolymers: miniaturized flow field-flow fractionation-assisted characterization of a single-cysteine mutated phaseolin expressed in transplastomic tobacco plants

The development of plant-based protein polymers to employ in biofilm production represents the promising intersection between material science and sustainability, and allows to obtain biodegradable materials that also possess excellent physicochemical properties. A possible candidate for protein biopolymer production is phaseolin, a storage protein highly abundant in P Vulgaris beans. We previously showed that transformed tobacco chloroplasts could be employed to express a mutated phaseolin carrying a signal peptide (directing it into the thylakoids) also enriched of a cysteine residue added to its C-terminal region. This modification allows for the formation of inter-chain disulfide bonds, as we previously demonstrated, and should promote polymerization. To verify the effect of the peptide modification and to quantify polymer formation, we employed hollow-fiber flow field-flow fractionation coupled to UV and multi-angle laser scattering detection (HF5-UV-MALS): HF5 allows for the selective size-based separation of phaseolin species, whereas MALS calculates molar mass and conformation state of each population. With the use of two different HF5 separation methods we first observed the native state of P.Vulgaris phaseolin, mainly assembled into trimers, and compared it to mutated phaseolin (P*) which instead resulted highly aggregated. Then we further characterized P* using a second separation method, discriminating between two and distinct high-molecular weight (HMW) species, one averaging 0.8 × 106 Da and the second reaching the tens of million Da. Insight on the conformation of these HMW species was offered from their conformation plots, which confirmed the positive impact of the Cys modification on polymerization.