Foaming and surface rheological behaviors of gliadin particles: Effect of solvent and concentration of gliadin stock solution

Soft gliadin nanoparticles at air/water interfaces: The transition from a particle-laden layer to a thick protein film

HYPOTHESIS

Protein-based soft particles possess a unique interfacial deformation behavior, which is difficult to capture and characterize. This complicates the analysis of their interfacial properties. Here, we aim to establish how the particle deformation affects their interfacial structural and mechanical properties.

EXPERIMENTS

Gliadin nanoparticles (GNPs) were selected as a model particle. We studied their adsorption behavior, the time-evolution of their morphology, and rheological behavior at the air/water interface by combining dilatational rheology and microstructure imaging. The rheology results were analyzed using Lissajous plots and quantified using the recently developed general stress decomposition (GSD) method.

FINDING

Three distinct stages were revealed in the adsorption and rearrangement process. First, spherical GNPs (∼105 nm) adsorbed to the interface. Then, these gradually deformed along the interface direction to a flattened shape, and formed a firm viscoelastic 2D solid film. Finally, further stretching and merging of GNPs at the interface resulted in rearrangement of their internal structure to form a thick film with lower stiffness than the initial film. These results demonstrate that the structure of GNPs confined at the interface is controlled by their deformability, and the latter can be used to tune the properties of prolamin particle-based multiphase systems.

Recent advances in nanomaterial-stabilized pickering foam: Mechanism, classification, properties, and applications

Pickering foam is a type of foam stabilized by solid particles known as Pickering stabilizers. These solid stabilizers adsorb at the liquid-gas interface, providing superior stability to the foam. Because of its high stability, controllability, versatility, and minimal environmental impact, nanomaterial-stabilized Pickering foam has opened up new possibilities and development prospects for foam applications. This review provides an overview of the current state of development of Pickering foam stabilized by a wide range of nanomaterials, including cellulose nanomaterials, chitin nanomaterials, silica nanoparticles, protein nanoparticles, clay mineral, carbon nanotubes, calcium carbonate nanoparticles, MXene, and graphene oxide nanosheets. Particularly, the preparation and surface modification methods of various nanoparticles, the fundamental properties of nanomaterial-stabilized Pickering foam, and the synergistic effects between nanoparticles and surfactants, functional polymers, and other additives are systematically introduced. In addition, the latest progress in the application of nanomaterial-stabilized Pickering foam in the oil industry, food industry, porous functional material, and foam flotation field is highlighted. Finally, the future prospects of nanomaterial-stabilized Pickering foam in different fields, along with directions for further research and development directions, are outlined.

Regulation of interfacial mechanics of soy protein via co-extraction with flaxseed protein for efficient fabrication of foams and emulsions

Enrichment of plant proteins with functionality is of great importance for expanding their application in food formulations. This study proposed an innovation to co-enrich soy protein and flaxseed protein to act as efficient interfacial stabilizers for generating foams and emulsions. The structure, interfacial properties, and functionalities of the soy protein-flaxseed protein natural nanoparticles (SFNPs) obtained by alkali extraction-isoelectric precipitation (AE) and salt extraction-dialysis (SE) methods were investigated. Overall, the foamability of AE-SFNPs (194.67 %) was 1.45-fold that of SE-SFNPs, due to their more flexible structure, smaller particle size, and suitable surface wettability, promoting diffusion and adsorption at the air-water interface. AE-SFNPs showed higher emulsion stability (140.89 min), probably because the adsorbed AE-SFNPs with smaller size displayed soft particle-like properties and stronger interfacial flexibility, and therefore could densely and evenly arrange at the interface, facilitating the formation of a stiff and solid-like interfacial layer, beneficial for more stable emulsion formation. The findings may innovatively expand the applications of SFNPs as food ingredients.

Surface stress decomposition in large amplitude oscillatory interfacial dilatation of complex interfaces

HYPOTHESIS

Multiphase materials are often subjected to large deformations during processing, but the rheological responses of complex interfaces (e.g. stabilized by proteins) in this nonlinear deformation regime are still poorly understood. We expect nonlinearities in the response to be introduce by changes of the interfacial network and surface density of the emulsifier.

EXPERIMENTS

Large amplitude oscillatory dilatation (LAOD) experiments were performed on WPI-, pea albumin-, pea globulin- and rapeseed lecithin-stabilized interfaces and analyzed with a general stress decomposition (GSD). With GSD, the stress response was decomposed into the four stress terms (τ₁-τ₄). Here, τ₁ and τ₂ represent, the elastic and viscous contribution of the odd Fourier harmonics, and τ₃ and τ₄ represent the dissipative and recoverable contribution of the even harmonics.

FINDINGS

Analysis of WPI-, pea albumin-, pea globulin- and rapeseed lecithin-stabilized interfaces revealed that higher odd harmonics (k≥3) describe in-plane network responses and that even harmonics describe surface density changes. Analysis of these complex interfaces showed that GSD is a valuable tool for (quantitative) description of interfacial responses in LAOD, providing new insights into the origin of asymmetric nonlinear stress responses.

Co-Extraction of Flaxseed Protein and Polysaccharide with a High Emulsifying and Foaming Property: Enrichment through the Sequence Extraction Approach

A new focus with respect to the extraction of plant protein is that ingredient enrichment should target functionality instead of pursuing purity. Herein, the sequence aqueous extraction method was used to co-enrich five protein-polysaccharide natural fractions from flaxseed meal, and their composition, structure, and functional properties were investigated. The total recovery rate of flaxseed protein obtained by the sequence extraction approach was more than 80%, which was far higher than the existing reports. The defatted flaxseed meal was soaked by deionized water to obtain fraction 1 (supernatant), and the residue was further treated to get fraction 2 (supernatant) and 3 (precipitate) through weak alkali solubilization. Part of the fraction 2 was taken out, followed by adjusting its pH to 4.2. After centrifuging, the albumin-rich supernatant and precipitate with protein content of 73.05% were gained and labeled as fraction 4 and fraction 5. The solubility of fraction 2 and 4 exceeded 90%, and the foaming ability and stability of fraction 5 were 12.76 times and 9.89 times higher than commercial flaxseed protein, respectively. The emulsifying properties of fractions 1, 2, and 5 were all greater than that of commercial sodium caseinate, implying that these fractions could be utilized as high-efficiency emulsifiers. Cryo-SEM results showed that polysaccharides in fractions were beneficial to the formation of network structure and induced the formation of tighter and smoother interfacial layers, which could prevent emulsion flocculation, disproportionation, and coalescence. This study provides a reference to promote the high-value utilization of flaxseed meals.

Relevance of the air-water interfacial and foaming properties of (modified) wheat proteins for food systems

A shift from animal protein- to plant protein-based foods is crucial in transitioning toward a more sustainable global food system. Among food products typically stabilized by animal proteins, food foams represent a major category. Wheat proteins are ubiquitous and structurally diverse, which offers opportunities for exploiting them for food foam and air-water interface stabilization. Notably, they are often classified into those that are soluble in aqueous systems (albumins and globulins) and those that are not (gliadins and glutenins). However, gliadins are at least to an extent water extractable and thus surface active. We here provide a comprehensive overview of studies investigating the air-water interfacial and foaming properties of the different wheat protein fractions. Characteristics in model systems are related to the functional role that wheat proteins play in gas cell stabilization in existing wheat-based foods (bread dough, cake batter, and beer foam). Still, to further extend the applicability of wheat proteins, and particularly the poorly soluble glutenins, to other food foams, their modification is required. Different physical, (bio)chemical, and other modification strategies that have been utilized to alter the solubility and therefore the air-water interfacial and foaming properties of the gluten protein fraction are critically reviewed. Such approaches may open up new opportunities for the application of (modified) gluten proteins in other food products, such as plant-based meringues, whippable drinks, or ice cream. In each section, important knowledge gaps are highlighted and perspectives for research efforts that could lead to the rational design of wheat protein systems with enhanced functionality and overall an increased applicability in food industry are proposed.

Spread Layers of Lysozyme Microgel at Liquid Surface

The spread layers of lysozyme (LYS) microgel particles were studied by surface dilational rheology, infrared reflection–absorption spectra, Brewster angle microscopy, atomic force microscopy, and scanning electron microscopy. It is shown that the properties of LYS microgel layers differ significantly from those of ß-lactoglobulin (BLG) microgel layers. In the latter case, the spread protein layer is mainly a monolayer, and the interactions between particles lead to the increase in the dynamic surface elasticity by up to 140 mN/m. In contrast, the dynamic elasticity of the LYS microgel layer does not exceed the values for pure protein layers. The compression isotherms also do not exhibit specific features of the layer collapse that are characteristic for the layers of BLG aggregates. LYS aggregates form trough three-dimensional clusters directly during the spreading process, and protein spherulites do not spread further along the interface. As a result, the liquid surface contains large, almost empty regions and some patches of high local concentration of the microgel particles.

Nonlinear dilatational rheology of different protein aggregates at the oil-water interface

Proteins tend to self-assemble into different morphological aggregates such as nanoparticles or fibrils during heat treatment depending on the processing conditions. The protein aggregates exhibit excellent interfacial activity and even better ability to stabilize emulsions than native proteins. The interfacial rheological properties at the oil-water interface play a very important role in emulsion stability, among which the interfacial nonlinear rheology is closely related to their ability to resist large perturbation. However, there are very few studies reporting the nonlinear interfacial rheological behavior of protein aggregates at the oil-water interface. In this study, β-lactoglobulin fibrous aggregates (F) and nanoparticle aggregates (NP) were prepared, and the adsorption kinetics and dilatational nonlinear rheological behavior of β-lactoglobulin aggregates at the oil-water interface under large amplitude deformation were studied using a pendant drop tensiometer, and compared with those of native proteins. From the adsorption experiments, the adsorption of protein aggregates, especially fibrils, was faster than that of native proteins in the early stage, while in the late stage, the native proteins displayed a significantly higher degree of rearrangement than the fibrils. The surface hydrophobicity and the short fibrils present mainly determine the properties of the fibril interface, while the behavior of the nanoparticle interface was significantly influenced by the size and charge properties of the nanoparticles. From the dilatational experiment, the Lissajous plots revealed that the F interface at all pHs evaluated and the βlg interface at pH 5.8 displayed strain softening in both expansion and compression processes, while the NP interface at all pHs and βlg interface at pH 2 and pH 7 displayed strain softening in expansion and strain hardening in compression processes. The nonlinear response of the protein aggregates at the oil-water interface was more obvious at pH 5.8. The modulus change from frequency sweeps revealed that the fibril interface was strong but not very structured in contrast to that formed by the native proteins which displays high structuration although weak in strength, whereas the strength of the interface formed by protein nanoparticles is in between, but more sensitive to the surface charge.

Fabrication and characterization of superior stable Pickering emulsions stabilized by propylene glycol alginate gliadin nanoparticles

Gliadin, a kind of amphiphilic protein from wheat, has been widely used for stabilizing Pickering emulsions, which is easy to form colloidal particles. Herein, gliadin/propylene glycol alginate (PGA) colloidal particles (GPPs) with different gliadin/PGA ratios were developed and used as emulsifiers to prepare Pickering emulsions with an internal phase of 80% (v/v). The addition of PGA made the GPPs a tree-fruit-like morphology, increasing the particle size and changing the zeta-potential. Hydrogen bond and electrostatic interaction are the major forces between gliadin and PGA. The wettability of GPPs was improved significantly in the presence of PGA. The oil-water contact angle reached 89.5° when the gliadin/PGA ratio was 1 : 1. The emulsion could be maintained at room temperature for 6 months when the oil phase ratio (Φ) was 70%. The high stability of the Pickering emulsion could be attributed to the thin film formed by GPPs on the surface of oil droplets. The improved resistance of algal oil in emulsions against oxidation was proved as the induction time increased six times. In addition, the porous material prepared using GPPs-stabilized emulsion as the template displayed an oil absorption ability of 106.41 g g^-1 and heavy metal adsorption ability of 202.71 mg g^-1. Such performance implies that GPPs are highly efficient food-grade Pickering emulsifiers that may be applied in various fields.

Effect of ultrasonic pretreatment on the emulsification properties of Clanis Bilineata Tingtauica Mell protein

Clanis Bilineata Tingtauica Mell Protein (CBTMP) is a naturally high-quality insect protein resource, while its poor emulsification has limited its application in food industry. In order to change the present situation, in this research, the ultrasonic pretreatment (0 W, 200 W, 400 W, 600 W, and 800 W) method was used to improve the emulsification properties of CBTMP. Results indicated that ultrasound treatment especially at 400 W could significantly change the particle sizes, further increase the content of sulfhydryl group and surface hydrophobicity. The emulsification properties of emulsions were enhanced (from 4.16 ± 1.07 m²/g to 27.62 ± 2.20 m²/g) by sonicated CBTMP solution. Moreover, the physical stability of the emulsions to salt stress and centrifugation treatment was also promoted. Additionally, rheology revealed that a stronger network was formed at 400 W and all samples exhibited frequency-dependent and amplitude-dependent properties. The experiment demonstrated that ultrasound pretreatment was an effective means to improve the emulsification properties of CBTMP and it could provide a promising perspective for the application of CBTMP in food industry.