Effect of pH on the mechanical, interfacial, and emulsification properties of chitosan microgels

Mechanisms of slow-release antibacterial properties in chitosan‑titanium dioxide stabilized perilla essential oil Pickering emulsions: Focusing on oil-water interfacial behaviors

Perilla essential oil (PLEO) offers benefits for food preservation and healthcare, yet its instability restricts its applications. In this study, chitosan (CS) and TiO2 used to prepare composite particles. TiO2, after being modified with sodium laurate (SL), was successfully introduced at 0.1 %-3 % into the CS matrix. The resulting CS-SL-TiO2 composite particles can be formed by intertwining and rearranging through intramolecular and intermolecular interactions, and form an O/W interface with stability and viscoelasticity. The Pickering emulsions stabilized by these particles exhibit non-Newtonian pseudoplastic behavior, shear-thinning properties, and slow-release characteristics, along with antibacterial activity. Emulsions with 0.5 % and 1 % CS-SL-TiO2 composites demonstrated superior antibacterial effects against Escherichia coli and Staphylococcus aureus. The study revealed that all emulsions undergo Fickian diffusion and a sustained release of PLEO, with the Ritger-Peppas model best describing this release mechanism. The slow-release behaviors positively correlates with interfacial pressure, composite particle size, composite particle potential, composite contact angle, emulsion particle size and emulsion potential, but negatively correlates with diffusion rate, penetration rate, release kinetics and release rate. The findings lay groundwork for developing slow-release antimicrobial emulsions within polysaccharide matrices, showcasing promise for antimicrobial packaging solutions and enhanced food preservation techniques.

Effect of cross-linking density on the rheological behavior of ultra-soft chitosan microgels at the oil-water interface

In this paper, microgels with uniform particle size were prepared by physically cross-linking the hydrophobically modified chitosan (h-CS) with sodium phytate (SP). The effects of cross-linking density on the interfacial adsorption kinetics, viscoelasticity, stress relaxation, and micorheological properties of the hydrophobically modified chitosan microgels (h-CSMs) at the oil-water interface were extensively investigated by the dilatational rheology, compressional rheology, and particle tracing microrheology. The results were correlated with the particle size, morphology, and elasticity of the microgels characterized by dynamic light scattering and atomic force microscopy. It was found that with the increase of cross-linking density, the h-CSMs changed from a polymer-like state to ultra-soft fussy spheres with higher elastic modulus. The compression isotherms demonstrated multi-stage increase caused by the interaction between the shells and that between the cores of the microgels successively. As the increase of cross-linking density, the h-CSMs diffused slower to the oil-water interface, but demonstrating faster permeation adsorption and rearrangement at the oil-water interface, finally forming interfacial layers of higher viscoelastic modulus due to the core-core interaction. Both the initial tension relaxation and the microgel rearrangement after interface expansion became faster as the microgel elasticity increased. The interfacial microrheology demonstrated dynamic caging effect caused by neighboring microgels. This article provides a more comprehensive understanding of the behaviors of polysaccharide microgels at the oil-water interface.

Preparation, structural characterization, and functional properties of wheat gluten amyloid fibrils-chitosan double network hydrogel as delivery carriers for ferulic acid

It has been demonstrated that ferulic acid (FA) can be effectively encapsulated using wheat gluten amyloid fibrils (AF) and chitosan (CS) in a double network hydrogel (DN) form, with cross-linking mediated by Genipin (GP). Within this system, the DN comprising gluten AF-FA and CS-FA exhibited optimal loading metrics at a formulation designated as DN8, achieving a load efficiency of 88.5 % and a load capacity of 0.78 %. Analysis through fluorescence quenching confirmed that DN8 harbored the highest quantity of FA. Fourier-transform infrared spectroscopy (FTIR) further verified a significant increase in β-sheet content post-hydrogel formation, enhancing the binding capacity for FA. Rheological assessments indicated a transition from solution to gel, delineating the phase state of the DN. Comprehensive in vitro digestion studies revealed that DN8 provided superior sustained release properties, exhibited the highest total antioxidant capacity, and displayed potent inhibitory activities against angiotensin I converting enzyme (ACE) and acetylcholinesterase (Ach-E). Additionally, the DN significantly bolstered the stability of FA against photothermal degradation. Collectively, these findings lay foundational insights for the advancement of the wheat gluten AF-based delivery system for bioactive compounds and provided a theoretical basis for the development of functional foods.

A Pickering emulsion stabilized by Chitosan-g-Poly(N-vinylcaprolactam) microgels: Interface formation, stability and stimuli-responsiveness

Pickering emulsions stabilized by solid particles are more stable and environmentally friendly compared to traditional surfactants. Herein, a series of Chitosan-g-Poly(N-vinylcaprolactam) (CS-g-PNVCL) microgel particles were synthesized via a free radical surfactant-free emulsion copolymerization and the obtained particles were used to stabilize Pickering emulsions. It is found that the ratio (CS/PNVCL = 60 wt%) was optimal to produce Pickering emulsions. The microstructures of Pickering emulsions can maintain for 60 days at room temperature and this long-term stability is attributed to the CS-g-PNVCL microgel particles adsorbed at the oil-water interface. The Pickering emulsions displayed thermo-responsive characteristics when exposed to environmental stimuli. The emulsions became destabilized with an increase in pH and temperature. The droplets turned unstable and irregular due to excessive NaCl concentration, caused by electrostatic repulsion between the microgel particles. This study presents a novel way to form smart and uniform Pickering emulsions with the application potential in food, cosmetics, and drug delivery, etc.

Lysozyme amyloid fibril-chitosan double network hydrogel: Preparation, characterization, and application on inhibition of Nε-(carboxyethyl)lysine

Nε-(carboxyethyl)lysine (CML), a typical advanced glycosylation end product produced during the processing of meat under high temperature, poses health risks. Active substances like polyphenols are known to inhibit the formation of harmful products during the processing of food. In this study, our objective was to prepare a double network hydrogel (DN) loaded with gallic acid using amyloid fibers and chitosan as a rigid and flexible network, respectively. The network as well as the interactions between the two networks were observed and analyzed. Chitosan concentration was the key factor regulating the structure and properties of the DN. At a chitosan concentration of 0.7%wt, the structure of DN became dense and its mechanical properties were improved, with the loading capacity and loading efficiency being increased by 143.79 % and 128.21 %, compared with those of amyloid fibril alone. Furthermore, the digestibility of gallic acid in simulated intestinal fluid was increased by 215.10 %. Moreover, adding DN to the beef patties effectively inhibited the formation of CML in a dose-response dependent manner. Addition of 3 wt% DN resulted in the inhibitory rate of CML in roast beef patties reaching a high 73.09 %. The quality and palatability of beef patties were improved. These findings suggest that DN shows great potential as an application that may be utilized to deliver active substances aimed at inhibiting CML in the meat processing industry.

Recent developments in chitosan based microgels and their hybrids

Chitosan based microgels have gained great attention because of their chemical stability, biocompatibility, easy functionalization and potential uses in numerous fields. Production, properties, characterization and applications of chitosan based microgels have been systematically reviewed in this article. Some of these systems exhibit responsive behavior towards external stimuli like pH, light, temperature, glucose, etc. in terms of swelling/deswelling in an aqueous medium depending upon the functionalities present in the network which makes them a potential candidate for various applications in the fields of biomedicine, agriculture, catalysis, sensing and nanotechnology. Current research development and critical overview in this field accompanying by future possibilities is presented. The discussion is concluded with recommended possible future works for further progress in this field.

Synthetic and biopolymeric microgels: Review of similarities and difference in behaviour in bulk phases and at interfaces

This review discusses the current knowledge of interfacial and bulk interactions of biopolymeric microgels in relation to the well-established properties of synthetic microgels for applications as viscosity modifiers and Pickering stabilisers. We present a timeline showing the key milestones in designing microgels and their bulk/ interfacial performance. Poly(N-isopropylacrylamide) (pNIPAM) microgels have remained as the protagonist in the synthetic microgel domain whilst proteins or polysaccharides have been primarily used to fabricate biopolymeric microgels. Bulk properties of microgel dispersions are dominated by the volume fraction (ϕ) of the microgel particles, but ϕ is difficult to pinpoint, as addressed by many theoretical models. By evaluating recent experimental studies over the last five years, we find an increasing focus on the analysis of microgel elasticity as a key parameter in modulating their packing at the interfaces, within the provinces of both synthetic and biopolymeric systems. Production methods and physiochemical factors shown to influence microgel swelling in the aqueous phase can have a significant impact on their bulk as well as interfacial performance. Compared to synthetic microgels, biopolymer microgels show a greater tendency for polydispersity and aggregation and do not appear to have a core-corona structure. Comprehensive studies of biopolymeric microgels are still lacking, for example, to accurately determine their inter- and intra- particle interactions, whilst a wider variety of techniques need to be applied in order to allow comparisons to real systems of practical usage.

Chitosan particles modulate the properties of cellulose nanocrystals through interparticle interactions: Effect of concentration

The physical and chemical properties of cellulose nanocrystals (CNC) were regulated by physical crosslinking with chitosan particles (CSp). At a fixed concentration (0.5 wt%) of CNC, varying CSp concentration (0.02-0.5 wt%) influenced the morphologies and chemical properties of the obtained complex particles (CNC-CSp). The results of Fourier transform infrared spectroscopy (FTIR) and zeta potential confirmed the electrostatic and hydrogen bonding interactions between CSp and CNC. At a low CSp concentration (0.02-0.05 wt%), the charge shielding effect induced the formation of particle aggregation networks, thus showing increased viscosity, turbidity and size (153.4-2605.7 nm). At a higher CSp concentration (0.1-0.5 wt%), the hydrogen bonding interaction promoted CSp adsorption onto the surface of CNC, thus facilitating the dispersion of CNC-CSp due to electrostatic repulsion caused by surface-adsorbed CSp. In addition, CSp improved the thermal stability, hydrophobicity (41.87-60.02°) and rheological properties of CNC. Compared with CNC, CNC-CSp displayed a better emulsifying ability and emulsion stability, in which CSp could play a dual role (i.e., charge regulator and stabilizer). This study suggests that introducing CSp can improve the properties and application potentials of CNC as food colloids.

A review of oil and water retention in emulsified meat products: The mechanisms of gelation and emulsification, the application of multi-layer hydrogels

Emulsified meat products are key deep-processing products due to unique flavor and high nutritional value. Myosin dissolves, and protein aggregation and heat-induced gelation occur after myosin unfolds and hydrophobic groups are exposed. Myosin could form interfacial protein membranes and wrap fat globules. Emulsified fat globules may be filled in heat-induced gel networks. Therefore, this review intends to discuss the influences of heat-induced gelation and interfacial adsorption behavior on oil and water retention. Firstly, the mechanism of heat-induced gelation was clarified from the perspective of protein conformation and micro-structure. Secondly, the mechanism of emulsification stability and its factors affecting interfacial adsorption were demonstrated as well as limitations and challenges. Finally, the structure characteristics and application of multi-layer hydrogels in the gelation and emulsification were clarified. It could conclude that the characteristic morphology, spatial conformation and structure adjustment affected heat-induced gelation and interfacial adsorption behavior. Spatial conformation and microstructure were adjusted to improve the oil and water retention by pH, ionic strength, amino acid, oil phase characteristic and protein interaction. Multi-layer hydrogels facilitated oil and water retention. The comprehensive review of gelation and emulsification mechanisms could promote the development of meat products and improvement of meat processing technology.

Multiscale combined techniques for evaluating emulsion stability: A critical review

Emulsions are multiscale and thermodynamically unstable systems which will undergo various unstable processes over time. The behavior of emulsifier molecules at the oil-water interface and the properties of the interfacial film are very important to the stability of the emulsion. In this paper, we mainly discussed the instability phenomena and mechanisms of emulsions, the effects of interfacial films on the long-term stability of emulsions and summarized a set of systematic multiscale combined methods for studying emulsion stability, including droplet size and distribution, zeta-potential, the continuous phase viscosity, adsorption mass and thickness of the interfacial film, interfacial dilatational rheology, interfacial shear rheology, particle tracking microrheology, visualization technologies of the interfacial film, molecular dynamics simulation and the quantitative evaluation methods of emulsion stability. This review provides the latest research progress and a set of systematic multiscale combined techniques and methods for researchers who are committed to the study of oil-water interface and emulsion stability. In addition, this review has important guiding significances for designing and customizing interfacial films with different properties, so as to obtain emulsion-based delivery systems with varying stability, oil digestibility and bioactive substance utilization.

A sub-freshness monitoring chitosan/starch-based colorimetric film for improving color recognition accuracy via controlling the pH value of the film-forming solution

The demand for intelligent packaging in food sub-freshness monitoring is increasing. Herein, a pH and NH3 responsing colorimetric film (PS-CH-LCA) was fabricated based on potato starch (PS), chitosan (CH) and Lonicera caerulea L. anthocyanins (LCA) via controlling the pH value of the film-forming solution, and was applied to the real-time monitoring of shrimp freshness. The PS-CH-LCA pH 2.5 film exhibited the highest tensile strength (6.43 MPa), the lowest water solubility (33.11%) and the most sensitive color responsiveness. Morphological and structural results revealed that CH was attached to the surface of PS via hydrogen bond, and anthocyanins were well immobilized in the film-forming matrix. The sensitive color change and its high correlation with spoilage indices demonstrated the PS-CH-LCA pH 2.5 film well indicated fresh, sub-fresh, spoiled level of shrimp. The results solved the limitation of chitosan-based packaging films in undistinguishable colorimetric endpoints, providing a new strategy for indicating the sub-freshness of food packaging.

Contribution of polysaccharides from crustacean in fermented food products

Fermented foods are of great importance for their role in preserving nutrients and enriching the human diet. Fermentation ensures longer shelf life and microbiological safety of food. Natural bioactive compounds have been paid attention as nutraceuticals or functional ingredients, which have health-promoting components since polysaccharides, especially chitosan, chitin and their derivatives, are biocompatible and biodegradable, biorenewable, without toxic properties and environmentally friendly. They have been applied in several fields such as medicine, agriculture, and food industry. This chapter provides information on polysaccharides obtained from crustacean as bioactive compounds as well as their effects in fermented foods.

Nonlinear dilatational rheology of different protein aggregates at the oil-water interface

Proteins tend to self-assemble into different morphological aggregates such as nanoparticles or fibrils during heat treatment depending on the processing conditions. The protein aggregates exhibit excellent interfacial activity and even better ability to stabilize emulsions than native proteins. The interfacial rheological properties at the oil-water interface play a very important role in emulsion stability, among which the interfacial nonlinear rheology is closely related to their ability to resist large perturbation. However, there are very few studies reporting the nonlinear interfacial rheological behavior of protein aggregates at the oil-water interface. In this study, β-lactoglobulin fibrous aggregates (F) and nanoparticle aggregates (NP) were prepared, and the adsorption kinetics and dilatational nonlinear rheological behavior of β-lactoglobulin aggregates at the oil-water interface under large amplitude deformation were studied using a pendant drop tensiometer, and compared with those of native proteins. From the adsorption experiments, the adsorption of protein aggregates, especially fibrils, was faster than that of native proteins in the early stage, while in the late stage, the native proteins displayed a significantly higher degree of rearrangement than the fibrils. The surface hydrophobicity and the short fibrils present mainly determine the properties of the fibril interface, while the behavior of the nanoparticle interface was significantly influenced by the size and charge properties of the nanoparticles. From the dilatational experiment, the Lissajous plots revealed that the F interface at all pHs evaluated and the βlg interface at pH 5.8 displayed strain softening in both expansion and compression processes, while the NP interface at all pHs and βlg interface at pH 2 and pH 7 displayed strain softening in expansion and strain hardening in compression processes. The nonlinear response of the protein aggregates at the oil-water interface was more obvious at pH 5.8. The modulus change from frequency sweeps revealed that the fibril interface was strong but not very structured in contrast to that formed by the native proteins which displays high structuration although weak in strength, whereas the strength of the interface formed by protein nanoparticles is in between, but more sensitive to the surface charge.

Electrospinning of Chitosan for Antibacterial Applications—Current Trends

Chitosan is a natural biopolymer that can be suitable for a wide range of applications due to its biocompatibility, rigid structure, and biodegradability. Moreover, it has been proven to have an antibacterial effect against several bacteria strains by incorporating the advantages of the electrospinning technique, with which tailored nanofibrous scaffolds can be produced. A literature search is conducted in this review regarding the antibacterial effectiveness of chitosan-based nanofibers in the filtration, biomedicine, and food protection industries. The results are promising in terms of research into sustainable materials. This review focuses on the electrospinning of chitosan for antibacterial applications and shows current trends in this field. In addition, various aspects such as the parameters affecting the antibacterial properties of chitosan are presented, and the application areas of electrospun chitosan nanofibers in the fields of air and water filtration, food storage, wound treatment, and tissue engineering are discussed in more detail.