Adsorption of microgel aggregates formed by assembly of gliadin nanoparticles and a β-lactoglobulin fibril-peptide mixture at the air/water interface: Surface morphology and foaming behavior

Soft gliadin nanoparticles at air/water interfaces: The transition from a particle-laden layer to a thick protein film

HYPOTHESIS

Protein-based soft particles possess a unique interfacial deformation behavior, which is difficult to capture and characterize. This complicates the analysis of their interfacial properties. Here, we aim to establish how the particle deformation affects their interfacial structural and mechanical properties.

EXPERIMENTS

Gliadin nanoparticles (GNPs) were selected as a model particle. We studied their adsorption behavior, the time-evolution of their morphology, and rheological behavior at the air/water interface by combining dilatational rheology and microstructure imaging. The rheology results were analyzed using Lissajous plots and quantified using the recently developed general stress decomposition (GSD) method.

FINDING

Three distinct stages were revealed in the adsorption and rearrangement process. First, spherical GNPs (∼105 nm) adsorbed to the interface. Then, these gradually deformed along the interface direction to a flattened shape, and formed a firm viscoelastic 2D solid film. Finally, further stretching and merging of GNPs at the interface resulted in rearrangement of their internal structure to form a thick film with lower stiffness than the initial film. These results demonstrate that the structure of GNPs confined at the interface is controlled by their deformability, and the latter can be used to tune the properties of prolamin particle-based multiphase systems.

Understanding the foam stability mechanisms of complex formed by soy protein isolate and different charged polysaccharides: Air/water interfacial behavior and rheological characteristics

This study evaluated the foaming properties, the dynamic adsorption behavior at the air/water (A/W) interface and the foam rheological characteristics of complexes formed by soy protein isolate (SPI) and different charged polysaccharides, including chitosan (CS), guar gum (GUG) and gellan gum (GEG). The results showed that the SPI/CS10 had the highest initial foam volume (26.67 mL), which were 3.89 %, 100.08 % and 70.19 % higher than that of single SPI, SPI/GUG and SPI/GEG complexes, respectively. Moreover, three charged polysaccharides could all significantly improve the foam stability of complexes. Among them, foams stabilized by SPI/GEG10 were the most stable that the foam volume slightly changed (approximately 1 mL) and no drainage occurred throughout the whole recording process. The interfacial behavior analysis showed that SPI/CS10 had higher diffusion (Kdiff) and rearrangement rate (KR) but lower penetration rate (KP) at the A/W interface compared with single SPI, while SPI/GUG10 and all SPI/GEG complexes showed higher KR and KP but lower Kdiff. In addition, SPI/CS10 was beneficial to concurrently enhance the elastic strength and solid-like behavior of foam system, while all SPI/GEG complexes could improve the elastic strength of foam system but was not conducive to the solid-like behavior.

Effect of different salts on the foaming properties of model protein systems for infant formula

This multiscale study aimed to evaluate the effects of different salts (NaCl, KCl, MgCl2, and CaCl2) on the foaming capacity (FC) and foam stability (FS) of model protein systems (MPS) for infant formula via changes in surface and structural properties. Our results showed that the FC and FS of MPS were increased with the addition of NaCl, KCl, and MgCl2, whereas CaCl2 significantly decreased FC (79.5 ± 10.6%) and increased FS (93.2 ± 2.2%). The surface hydrophobicity was increased and the net charge and surface tension were reduced after the addition of salts. Structural analysis revealed the reduction of intensity of intrinsic fluorescence spectroscopy and UV absorption, and the conversion of α-helix into β-strand, which was attributed to protein agglomeration. Additionally, MgCl2 and CaCl2 exhibited larger size and lower net charge compared with NaCl and KCl, indicating a greater ability to bind to charged amino acids and form larger aggregates. Correlation analysis indicated that FC was positively related to adsorbed protein and β-turn and negatively correlated with particle size. In addition, FS showed a positive correlation with β-strand, apparent viscosity, and zeta potential. However, it exhibited a negative correlation with β-turn, α-helix, and sulfhydryl content. These results provide a theoretical reference for further understanding of the effect of salts on the foaming properties of MPS.

Regulation of interfacial mechanics of soy protein via co-extraction with flaxseed protein for efficient fabrication of foams and emulsions

Enrichment of plant proteins with functionality is of great importance for expanding their application in food formulations. This study proposed an innovation to co-enrich soy protein and flaxseed protein to act as efficient interfacial stabilizers for generating foams and emulsions. The structure, interfacial properties, and functionalities of the soy protein-flaxseed protein natural nanoparticles (SFNPs) obtained by alkali extraction-isoelectric precipitation (AE) and salt extraction-dialysis (SE) methods were investigated. Overall, the foamability of AE-SFNPs (194.67 %) was 1.45-fold that of SE-SFNPs, due to their more flexible structure, smaller particle size, and suitable surface wettability, promoting diffusion and adsorption at the air-water interface. AE-SFNPs showed higher emulsion stability (140.89 min), probably because the adsorbed AE-SFNPs with smaller size displayed soft particle-like properties and stronger interfacial flexibility, and therefore could densely and evenly arrange at the interface, facilitating the formation of a stiff and solid-like interfacial layer, beneficial for more stable emulsion formation. The findings may innovatively expand the applications of SFNPs as food ingredients.

Dynamic Surface Properties of α-Lactalbumin Fibril Dispersions

The dynamic surface properties of aqueous dispersions of α-lactalbumin (ALA) amyloid fibrils differ noticeably from the properties of the fibril dispersions of other globular proteins. As a result, the protocol of the application of ALA fibrils to form stable foams and emulsions has to be deviate from that of other protein fibrils. Unlike the fibrils of β-lactoglobulin and lysozyme, ALA fibrils can be easily purified from hydrolyzed peptides and native protein molecules. The application of the oscillating barrier method shows that the dynamic surface elasticity of ALA fibril dispersions exceeds the surface elasticity of native protein solutions at pH 2. ALA fibrils proved to be stable at this pH, but the stability breaks at higher pH levels when the fibrils start to release small peptides of high surface activity. As a result, the dynamic surface properties of ALA coincide with those of native protein solutions. The ionic strength strongly influences the adsorption kinetics of both fibril dispersions and native protein solutions but have almost no impact on the structure of the adsorption layers.

Relevance of the air-water interfacial and foaming properties of (modified) wheat proteins for food systems

A shift from animal protein- to plant protein-based foods is crucial in transitioning toward a more sustainable global food system. Among food products typically stabilized by animal proteins, food foams represent a major category. Wheat proteins are ubiquitous and structurally diverse, which offers opportunities for exploiting them for food foam and air-water interface stabilization. Notably, they are often classified into those that are soluble in aqueous systems (albumins and globulins) and those that are not (gliadins and glutenins). However, gliadins are at least to an extent water extractable and thus surface active. We here provide a comprehensive overview of studies investigating the air-water interfacial and foaming properties of the different wheat protein fractions. Characteristics in model systems are related to the functional role that wheat proteins play in gas cell stabilization in existing wheat-based foods (bread dough, cake batter, and beer foam). Still, to further extend the applicability of wheat proteins, and particularly the poorly soluble glutenins, to other food foams, their modification is required. Different physical, (bio)chemical, and other modification strategies that have been utilized to alter the solubility and therefore the air-water interfacial and foaming properties of the gluten protein fraction are critically reviewed. Such approaches may open up new opportunities for the application of (modified) gluten proteins in other food products, such as plant-based meringues, whippable drinks, or ice cream. In each section, important knowledge gaps are highlighted and perspectives for research efforts that could lead to the rational design of wheat protein systems with enhanced functionality and overall an increased applicability in food industry are proposed.

Anthocyanin-Rich Jamun (Syzygium cumini L.) Pulp Transported on Protein-Coated Ionic Gelation Microparticles of Calcium Alginate: Production and Morphological Characteristics

Jamun (Syzygium cumini L.) is a fruit rich in anthocyanins, an important group of natural pigments, with color ranging from red to blue, soluble in water, highly antioxidant. Despite its great potential for use as a natural dye, its application is a challenge, due to the instability of these compounds in the environmental conditions of processing and storage commonly used by the food industry. Therefore, this study evaluated the microencapsulation of anthocyanin-rich jamun pulp by ionic gelation (IG) and its protein-coating by electrostatic interaction (PC). The effect of the ratio of sodium alginate solids and jamun pulp (1:0.40 to 1:2, w/w) and the concentration of gelatin coating solution (0% to 10%, w/w) on the morphology, water and total protein content and anthocyanins content in the microparticles were evaluated. Visually, the IG particles showed color tones ranging from reddish to purplish, which became less intense and opaque after being submitted to the gelatin coating process. Microscopic images demonstrated that microparticles formed had an irregular and heterogeneous shape with disorganized gel network formation is due to the presence of solid structures of jamun pulp, observed within the microparticles. The greater the concentration of gelatin in the coating solution, the greater the protein adsorption for the formation of the protective layer, ranging from 21.82 ± 0.72% (T1) to 55.87 ± 4.23% (T6). Protein adsorption on the GI resulted in a decrease in moisture content (ranging from 87.04 ± 0.22 to 97.06 ± 0.12%) and anthocyanins contents (ranging from 5.84 ± 0.62 to 0.78 ± 0.14%) in the PC microparticles.

Spread Layers of Lysozyme Microgel at Liquid Surface

The spread layers of lysozyme (LYS) microgel particles were studied by surface dilational rheology, infrared reflection–absorption spectra, Brewster angle microscopy, atomic force microscopy, and scanning electron microscopy. It is shown that the properties of LYS microgel layers differ significantly from those of ß-lactoglobulin (BLG) microgel layers. In the latter case, the spread protein layer is mainly a monolayer, and the interactions between particles lead to the increase in the dynamic surface elasticity by up to 140 mN/m. In contrast, the dynamic elasticity of the LYS microgel layer does not exceed the values for pure protein layers. The compression isotherms also do not exhibit specific features of the layer collapse that are characteristic for the layers of BLG aggregates. LYS aggregates form trough three-dimensional clusters directly during the spreading process, and protein spherulites do not spread further along the interface. As a result, the liquid surface contains large, almost empty regions and some patches of high local concentration of the microgel particles.

Ultrasonic-assisted pH shift-induced interfacial remodeling for enhancing the emulsifying and foaming properties of perilla protein isolate

In order to expand the applications of plant protein in food formulations, enhancement of its functionalities is meaningful. Herein, the effects of ultrasonic (20 KHz, 400 W, 20 min)-assisted pH shift (pH 10 and 12) treatment on the structure, interfacial behaviors, as well as the emulsifying and foaming properties of perilla protein isolate (PPI) were investigated. Results showed that the solubility of PPI treated by ultrasonic-assisted pH shift (named UPPI-10/12) exceeded 90 %, which was at least 2 and 1.4 times that of untreated PPI and ultrasound-based PPI. Meanwhile, UPPI-10/12 possessed higher foamability (increasing by at least 1.2 times) and good emulsifying stability. Ultrasonic-assisted pH shift treatment decomposed large PPI aggregates into tiny particles, evident from the dynamic light scattering (DLS) and atomic force microscopy results. Besides, this approach induced a decrease in α-helix of PPI and an increase in β-sheet, which might result in the exposure of the hydrophobic group on the structural surface of PPI, thus leading to the increase of surface hydrophobicity. The smaller size and higher hydrophobicity endowed UPPI-10/12 faster adsorption rate, tighter interfacial structure, and higher elastic modulus at the air- and oil-water interfaces, evident from the cryo-SEM and interfacial dilatational rheological results. Thus, the emulsifying and foaming properties could evidently enhance. This study demonstrated that ultrasonic-assisted pH shift technique was a simple approach to effectively improve the functional performance of PPI.

Effect of Fibril Entanglement on Pickering Emulsions Stabilized by Whey Protein Fibrils for Nobiletin Delivery

The aim of the study was to investigate the effects of whey protein isolate (WPI) fibrils entanglement on the stability and loading capacity of WPI fibrils-stabilized Pickering emulsion. The results of rheology and small-angle X-ray scattering (SAXS) showed the overlap concentration (C*) of WPI fibrils was around 0.5 wt.%. When the concentration was higher than C*, the fibrils became compact and entangled in solution due to a small cross-sectional radius of gyration value (1.18 nm). The interfacial behavior was evaluated by interfacial adsorption and confocal laser scanning microscopy (CLSM). As the fibril concentration increased from 0.1 wt.% to 1.25 wt.%, faster adsorption kinetics (from 0.13 to 0.21) and lower interfacial tension (from 11.85 mN/m to 10.34 mN/m) were achieved. CLSM results showed that WPI fibrils can effectively absorb on the surface of oil droplets. Finally, the microstructure and in vitro lipolysis were used to evaluate the effect of fibrils entanglement on the stability of emulsion and bioaccessibility of nobiletin. At C* concentration, WPI fibrils-stabilized Pickering emulsions exhibited excellent long-term stability and were also stable at various pHs (2.0–7.0) and ionic strengths (0–200 mM). WPI fibrils-stabilized Pickering emulsions after loading nobiletin remained stable, and in vitro digestion showed that these Pickering emulsions could significantly improve the extent of lipolysis (from 36% to 49%) and nobiletin bioaccessibility (21.9% to 62.5%). This study could provide new insight into the fabrication of food-grade Pickering emulsion with good nutraceutical protection.

Smart ultra-stable foams stabilized using cellulose nanocrystal (CNC) gels via noncovalent bonding

Smart ultra-stable foams stabilized by cellulose nanocrystal (CNC)-based gels were fabricated. The stabilization is ascribed to the dense films and three-dimensional networks at the interface and in the bulk induced by the charge shielding effect and electrostatic attraction between protonated bis(2-hydroxyethyl)oleylamine (BOA-H⁺) micelles and negatively charged CNC colloids. The as-prepared foam could maintain its morphology without breaking or drainage for two months, showing high stability. Outstanding CO₂/N₂ reversibility endows the system with on-demand control of foaming/defoaming, which is necessary in many aspects. The functionalized foam is expected to open up an opportunity for the design of intelligent oilfield chemicals and extinguishant systems.