Effect of vacuum combined ultrasound treatment on the fine structure and physiochemical properties of rice starch

Citrus oil gland and cuticular wax inspired multifunctional gelatin film of OSA-starch nanoparticles-based nanoemulsions for preserving perishable fruit

Inspired by the citrus oil gland and cuticular wax, a multifunctional material that stably and continuously released the carvacrol and provided physical defenses was developed to address issues of fresh-cut fruits to microbial infestation and moisture loss. The results confirmed that low molecular weight and loose structure of starch nanoparticles prepared by the ultrasound-assisted Fenton system were preferable for octenyl succinic anhydride modification compared to native starch, achieving a higher degree of substitution (increased by 18.59 %), utilizing in preparing nanoemulsions (NEs) for encapsulating carvacrol (at 5 % level: 81.58 %). Furthermore, the NEs-based gelatin (G) film improved with surface hydrophobic modification by myristic acid (MA) successfully replicated the citrus oil gland and cuticular wax, providing superior antioxidant (enhanced by 3-4 times) and antimicrobial properties (95.99 % and 84.97 % against Staphylococcus aureus and Escherichia coli respectively), as well as the exceptional UV shielding (nearly 0 transmittance in the UV region), mechanical (72 % increase in tensile strength), and hydrophobic (WCA 133.63°). Moreover, the 5%NE-G@MA film inhibited foodborne microbial growth (reduced by 50 %) and water loss (controlled below 15 %), extending the shelf life of fresh-cut navel orange and kiwi. Thus, the multifunctional film was a potential shield for preserving perishable fresh-cut products.

Ultrasonication: An Efficient Alternative for the Physical Modification of Starches, Flours and Grains

Ultrasonic (USC) treatments have been applied to starches, flours and grains to modify their physicochemical properties and improve their industrial applicability. The extent of the modification caused by USC treatment depends on the treatment conditions and the natural characteristics of the treated matter. Cavitation leads to structural damage and fragmentation and partial depolymerization of starch components. The amorphous regions are more susceptible to being disrupted by ultrasonication, while the crystalline regions require extended USC exposure to be affected. The increased surface area in USC-treated samples has a higher interaction with water, resulting in modification of the swelling power, solubility, apparent viscosity, pasting properties and gel rheological and textural properties. Starch digestibility has been reported to be modified by ultrasonication to different extents depending on the power applied. The most important treatment variables leading to more pronounced modifications in USC treatments are the botanical origin of the treated matter, USC power, time, concentration and temperature. The interaction between these factors also has a significant impact on the damage caused by the treatment. The molecular rearrangement and destruction of starch structures occur simultaneously during the USC treatment and the final properties of the modified matrix will depend on the array of treatment parameters. This review summarizes the known effects of ultrasonic treatments in modifying starches, flours and grains.

Improving physicochemical and nutritional attributes of rice starch through green modification techniques

Rice, has long been an inseparable part of the human diet all over the world. As one of the most rapidly growing crops, rice has played a key role in securing the food chain of low-income food-deficit countries. Starch is the main component in rice granules which other than its nutritional essence, plays a key role in defining the physicochemical attributes of rice-based products. However, rice starch suffers from weak techno-functional characteristics (e.g., retrogradability of pastes, opacity of gels, and low shear/temperature resistibility. Green modification techniques (i.e. Non-thermal methods, Novel thermal (e.g., microwave, and ohmic heating) and enzymatic approaches) were shown to be potent tools in modifying rice starch characteristics without the exertion of unfavorable chemical reagents. This study corroborated the potential of green techniques for rice starch modification and provided deep insight for their further application instead of unsafe chemical methods.

Effects of cooking methods on the physical properties and in vitro digestibility of starch isolated from Chinese yam

The objective of this study was to compare the structural and functional attributes of Chinese yam starches obtained via different domestic cooking methods. Cooking changed the crystalline type from the C type to the CB type, and disrupted the short- and long-range molecular order of Chinese yam starch. The average chain length of amylopectin in BOS (boiling starch) was the smallest at 22.78, while RWS had the longest average chain length, reaching 24.24. These alterations in molecular structure resulted in variations in functional properties such as solubility, swelling power (SP), pasting characteristics, and rheological properties. Among these alterations, boiling was the most effective method for increasing the water-binding capacity and SP of starch. Specifically, its water holding capacity was 2.12 times that of RWS. In vitro digestion experiments indicated that BOS has a higher digestion rate (k = 0.0272 min-1) and lower RDS (rapidly digestible starch), which may be related to its amylopectin chain length distribution. This study can guide us to utilize yam starch through suitable cooking methods, which is relevant for the processing and application of Chinese yam starch.

Impact of starch chain length distributions on physicochemical properties and digestibility of starches

Changing starch structure at different levels is a promising approach to promote desirable metabolic responses. Chain length distribution (CLD) is among the starch structural characteristics having a potential to determine properties of starch-based products. Therefore, the objective of the current review is to summarize recent findings on CLD and its impact on physicochemical properties and digestion. Investigations undertaken to enhance understanding of starch structure have shown clearly that CLD is a significant determining factor in modulating starch digestibility. Enzymatic modifications and processing treatments alter the CLD of starch, which in turn affects the rate of digestion, but the underlying molecular mechanisms have yet to be fully elucidated. Even though advances have been made in manipulating CLD using different methods and to correlate the changes with various functional properties, in general the area needs further investigations to open new awareness for enhancing healthiness of starchy foods.

Structure, properties, and resistant starch content of modified rice flour prepared using dual hydrothermal treatment

In this study, modified rice flour with high resistant starch (RS) content was prepared by dual hydrothermal treatment, which combined the heat-moisture treatment with the pressure-heat treatment method. The effects of dual hydrothermal treatment on the structure and properties of modified rice flour and their relationship with RS content were further discussed. The results showed that the RS content of modified rice flour was higher than that of rice flour (RF), and dual hydrothermal treatment was more effective than single hydrothermal treatment. Adhesion and aggregation occurred between the particles of modified rice flour. Both crystallinity and short-range ordering were increased in modified rice flour compared to RF. Moreover, the modified rice flour of dual hydrothermal treatment had higher crystallinity and a more ordered short-range structure of starch, which improved RS content to a certain extent. Compared to single hydrothermal treatment, the modified rice flour of dual hydrothermal treatment had a lower viscoelasticity and a better thermal stability. Both RF and modified rice flour gels were composed mainly of free water, with minimal amounts of bound and immobile water. The study may provide a reference for the production and application of modified rice flour.

Starch molecular structure, physicochemical properties and in vitro digestibility of Ethiopian malt barley varieties

Characterization of local varietal barley quality diversity can help boost further development of novel value-added utilization of the grain. Therefore, in this study starch was isolated from 11 Ethiopian malting barley varieties to determine starch structural, pasting, thermal and digestibility characteristics, and their inter-relationships. The varieties showed significant differences in all amylopectin chain length fractions, and the A, B1, B2 and B3 chains ranged from 25.4 to 30.1, 47.4-50.1, 14.3-16.0 and 7.8-9.0 %, respectively. The varieties also exhibited significant variation in amylose content, relative crystallinity, absorbance peak ratios, pasting and thermal properties. Moreover, on average about 83 % raw starch of the varieties was classified as slowly digestible and resistant, whereas after gelatinization this was reduced to 9 %. Molecular and crystalline structures were strongly related to pasting properties, thermal characteristics and in vitro digestibility of the starches. The study provides information on some starch quality characteristics and the inter-relationships among the parameters, and might inspire further studies to suggest possible target-based starch modifications, and future novel utilization of barley. More studies are required to investigate the association of starch quality parameters with malting quality attributes.

Lotus starch/bamboo shoot polysaccharide composite system treated via ultrasound: Pasting, gelling properties and multiscale structure

This study investigated the effects of ultrasound treatment on the physicochemical properties, digestion properties, and multiscale structure of a lotus root starch (LS) and bamboo shoot polysaccharide (BSP) composite system. It also preliminarily revealed the mechanism underlying the modification effect of ultrasound treatment. After 180-360 W ultrasound treatment, the viscosity, thixotropy, and gel viscoelasticity of the LS/BSP paste increased. However, treatment with the ultrasound power of 540 and 720 W decreased viscoelasticity. After 14 days of retrogradation, the hardness and cohesiveness of the LS/BSP gel increased under 180 and 360 W ultrasound treatment but decreased under 540 and 720 W ultrasound treatment. After 540 W ultrasound treatment, RDS content decreased by 17.2 % and resistant starch content increased by 32.5 %. After 180 min of in vitro digestion, the hydrolysis rate of LS/BSP decreased from 97.82 % to 93.13 % as the ultrasound power increased to 540 W. Ultrasound promoted the uniform dispersion of BSP in the starch paste and the movement, orientation, rearrangement, and aggregation of starch and BSP molecular chains. These effects further enhanced the interaction between BSP and starch, resulting in the formation of a dense paste structure with strong resistance to digestive enzymes. This work revealed the mechanism of the effects of ultrasound treatment on LS/BSP and found that 360-540 W ultrasound treatment could improve the physicochemical properties and digestion properties of LS/BSP.

Impact of long-term ultrasound treatment on structural and physicochemical properties of starches differing in granule size

Granule size is a critical parameter affecting starch processing properties. Ultrasound treatments of up to 22 h were applied on two starches differing in granule size (quinoa starch and maize starch). The two starches showed significantly different trends in both structural and physicochemical aspects affected by the ultrasound treatments. For the small granule starch (volume-weighted mean particle size of 1.79 μm), short-term ultrasonication caused an increase of swelling power. As the treatment time increased, the physicochemical properties were influenced by the degradation of amylopectin external chains. The X-ray diffraction results showed a decrease of relative crystallinity and changes of peak areas with long-term treatment. On the other hand, a balance between amylose leaching and surface damages was seen for the large granule starch (volume-weighted mean particle size of 18.3 μm). The effect of ultrasound modification on starches with different molecular and granular structures was discussed. A possible mechanism of the ultrasound effect was proposed.

How to effectively and greenly prepare multi-scale structural starch nanoparticles for strengthening gelatin film (ultrasound-Fenton system)

Ultrasound (US) assisted with Fenton (US-Fenton) reaction was developed to efficiently and greenly prepare starch nanoparticles (SNPs) that were employed as nanofillers to enhance gelatin (G) film properties. Compared to Fenton reaction alone, US-Fenton reaction significantly improved preparation efficiency and dispersion of SNPs (p < 0.05). An optimal US-Fenton reaction parameter (300 mM H2O2, ascorbic acid 55 mM, US 45 min) was found to prepare SNPs with uniform sizes (50-90 nm) and low molecular weight (Mn 7.91 × 105 Da). The XRD, FT-IR, and SAXS analysis revealed that the US-Fenton reaction degraded the amorphous and crystalline zones of starch from top to down, leading to the collapse of the original layered structure starch and the progressive formation of SNPs. The different sizes of SNPs were selected to prepare the composite films. The G-SNP3 film (with 50-90 nm SNPs) showed the most outstanding UV blocking, tensile, and barrier properties. Especially, the tensile strength of G-5%SNP3 film (containing 5 % SNPs) increased by 156 % and 6 % over that of G film and G-5%SNP2 film (containing 5%SNPs with 100-180 nm), respectively. Therefore, the nanomaterial was promisingly prepared by the US-Fenton system and provided a strategy for designing and producing nanocomposite films.

Multi-Scale Comparison of Physicochemical Properties, Refined Structures, and Gel Characteristics of a Novel Native Wild Pea Starch with Commercial Pea and Mung Bean Starch

In the present study, the morphology, refined structure, thermal properties, and dynamic rheological, texture, and digestive properties of common vetch starch, a potential new type of legume starch, were systematically investigated, and compared with commercially available pea and mung bean starch. The results showed that the composition and chemical structure of common vetch starch were similar to the pea and mung bean starch. However, the amylose content (35.69), A-chain proportion (37.62), and relative crystallinity (34.16) of common vetch starch were higher, and the particle size and molecular weight (44,042 kDa) were larger. The value of pasting properties and enthalpy change (ΔH) of gelatinization of common vetch starch was lower and higher than mung bean and pea starch, respectively, and a lower swelling power and pasting index indicate that common vetch starch had higher hot-paste and cold-paste stability. In addition, common vetch starch gel exhibited good rheology, cohesiveness, and anti-digestive properties. These results provide new insights into the broader application of common vetch starch.

Improving the swelling capacity of granular cold-water rice starch by ultrasound-assisted alcoholic-alkaline treatment

The aim of this study was to determine the ability to improve the capacity of cold swelling and cold-water solubility of rice starch by ultrasonic-assisted alcohol-alkaline and alcohol-alkaline methods. To achieve this, ultrasound powers (U) were varied (30%, 70%, 100%) under the granular cold-water swelling starch (GCWSS) preparation (GCWSS + 30 %U, GCWSS + 70 %U, and GCWSS + 100 %U). The effects of these methods on morphological, pasting properties, amylose content, ratio of 1047/1022 spectra by FTIR, turbidity, freeze-thaw stability, and gel texture were also studied and compared. The results showed that the surface of GCWSS granules presented a honeycomb especially GCWSS + U treatments exhibited more porous on the surface of starch granules. The cold swelling power and solubility of GCWSS + U samples were increased which confirmed by reducing ratio of ordered structure to amorphous structure of starch, and turbidity was also decreased. Moreover, pasting temperature, breakdown, final viscosity, and setback decreased while peak viscosity increased as measured using a Rapid Visco Analyzer. The freeze-thaw stability of GCWSS + U was more resistant to syneresis than GCWSS under repeated freeze-thaw cycles. The reduction of gel hardness and springiness was observed using Texture Analyzer. These changes were enhanced with increasing ultrasound powers. Thus, the results indicate that the different ultrasound-assisted alcohol-alkaline treatments for preparing GCWSS show an effective use in the preparation of GCWSS with improved cold-water swelling and reduced retrogradation of rice starch.

Structural, physicochemical and digestive properties of rice starch modified by preheating and pullulanase treatments

The structural, physicochemical and digestive properties of rice starch modified by the combination of different temperature (60, 70, 80, 90 and 100 °C) preheating and pullulanase (PUL60, PUL70, PUL80, PUL90 and PUL100) treatments were investigated. The PUL60 treatment mainly modified the surface layer of starch granules, which increased the amylose content and damaged some ordered structures, resulting in slight decreases of gel strength and estimated glycemic index (eGI). With the increase of preheating temperature, PUL could act on more enzymatic sites to release a large amount of linear chains, reduce the ordered degree, and transform the A-type crystalline structure into B-type. The low molecule interaction strength between linear chains weakened the gel network structure, and some stable crystal structures formed by longer chains resisted the enzyme digestion. The gel strength and eGI value of PUL70 starch decreased significantly, and the properties of PUL80-100 starches tended to be stable, showing a further significant decrease of gel strength and a slight reduction of eGI value. Therefore, the preheating treatments at 60, 70 and 80 °C were suitable for the PUL modification of rice starch to obtain strong, medium and weak gel strength respectively, and the digestibility decreased with increasing preheating temperature.

Understanding the texture and digestibility attributes of rice noodles supplemented with common vetch starch

The effects of common vetch starch (CVS) substitution on rice noodle quality were investigated, aiming to improve their texture and reduce starch digestibility. The CVS had larger granule sizes, higher amylose content and more long branch chains compared with rice starch (RS). When the CVS substitution level was 20 %, the rice noodles had the best texture quality, as the mixtures with more total starch and amylose could form denser gel structures. Moreover, the starch chains were easier to rearrange to form double helix ordered structures, resulting in a slower digestion rate. With the further increase of CVS, the noodle structure weakened and the starch digestion rate increased. This was due to the formation of looser gel structures and less ordered structures as RS granules could be easily separated into different parts by large amount of CVS with larger granule sizes, and RS with more short chains tended to be cross-linked with RS during retrogradation. With increasing CVS substitution level, the estimated glycemic index (eGI) of rice noodles decreased and then tended to be stable. Therefore, appropriate CVS substitution could improve the texture quality of rice noodles and reduce the eGI value, and the best substitution level was 20 %.

Preparation of starch-based functional food nano-microcapsule delivery system and its controlled release characteristics

Most of the functional substances in food are absorbed in the small intestine, but before entering the small intestine, the strong acid and enzymes in the stomach limit the amount that can reach the small intestine. Therefore, in this paper, to develop a delivery system for functional food ingredients, maintain the biological activity of the ingredients, and deliver them to the target digestive organs, preparation of starch-based functional food nano-microcapsule delivery system and its controlled release characteristics were reviewed. Embedding unstable food active ingredients in starch-based nano-microcapsules can give the core material excellent stability and certain functional effects. Starch-based wall materials refer to a type of natural polymer material that uses starch or its derivatives to coat fat-soluble components with its hydrophobic cavities. The preparation methods of starch-based wall materials mainly include spray drying, extrusion, freeze drying, ultra-high pressure, coagulation, fluidized bed coating, molecular inclusion, chemical, and enzymic methods. The controlled release of functional food can be achieved by preparing starch-based nano-microcapsules to encapsulate the active agents. It has been reported that that compared with traditional embedding agents such as gelatin, acacia gum, and xanthan gum, starch-based functional food nano-microcapsule delivery system had many good properties, including improving antioxidant capacity, bioavailability, probiotics, and concealing bad flavors. From this review, we can learn which method should be chosen to prepare starch-based functional food nano-microcapsule delivery system and understand the mechanism of controlled release.

Ultrasound Treatment Enhanced Semidry-Milled Rice Flour Properties and Gluten-Free Rice Bread Quality

The structural and functional properties of physical modified rice flour, including ultrasound treated rice flour (US), microwave treated rice flour (MW) and hydrothermal treated rice flour (HT) were investigated with wet-milled rice flour (WF) used as a positive control. The results showed the presence of small dents and pores on the rice flour granules of US and MW while more fragments and cracks were showed in HT. XRD and FTIR revealed that moderate ultrasonic treatment promoted the orderly arrangement of starch while hydrothermal treatment destroyed the crystalline structure of rice flour. In addition, the significant decrease of gelatinization enthalpy and the narrowing gelatinization temperature were observed in US. Compared to that of SF, adding physical modified rice flour led to a batter with higher viscoelasticity and lower tan δ. However, the batter added HT exhibited highest G' and G″ values and lowest tan δ, which led to a harder texture of bread. Texture analysis demonstrated that physical modified rice flour (except HT) reduced the hardness, cohesion, and gumminess of rice bread. Especially, the specific volume of bread with US increased by 15.6% and the hardness decreased by 17.6%. This study suggested that ultrasound treatment of rice flour could improve texture properties and appearance of rice bread.