Citric acid and heating on gelatin hydrolysis and gelation in confectionery gels

Novel nutraceutical delivery system utilizing a bigel formulated with sesame oil, kokum butter, and pectin

This study delineates biobased foods. Curcumin (CRU) delivery modules were studied using pectin gel, Sesame oil (SO), and Kokum butter (KB) oleogel (OG). SB1, the control, has 10% OG. The pectin gel between 10 and 50% oleogel were emulsified by 2.5% tween 80. Surface, physical, chemical, and physiochemical properties of prepared bigels were examined. Microscopic studies show biphasic feature. With OG content, FTIR shows hydrogen bonding increasing and decreasing. XRD confirmed gel amorphousness. Stress relaxation indicated 10% control bigel had considerably less strength. Bigel impedance factors increased considerably with OG content, according to impedance profiles. The moisture study found that replacing hydro phase with OG phase in formulations reduced moisture content from 10 to 50%. Less CRU released from 20 to 50% bigel matrices than 10% during in vitro studies. Acidic pH hindered polymer relaxation, altering release behaviour. Overall, the bigels were studied and shown to regulate oral CRU administration.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-024-01559-3.

Characterization of Prototype Gummy Formulations Provides Insight into Setting Quality Standards

Gummy formulations are considered suitable alternatives to traditional oral dosage forms like tablets and capsules due to their merits that include chewability, softness/flexibility, improved drug release, administration without water, appealing organoleptic properties, better patient compliance, easy preparation and usefulness for persons of different ages (e.g. children). Though there is increasing interest in gummy formulations containing drugs, measurable parameters, and specification limits for evaluating their quality are scarce. Quality check forms an essential part of the pharmaceutical development process because drug products must be distributed as consistently stable, safe, and therapeutically effective entities. Consequently, some quality parameters that could contribute to the overall performance of typical gummy formulations were investigated employing six brands of non-medicinal gummies as specimens. Accordingly, key physicochemical and micromechanical characteristics namely adhesiveness (0.009 - 0.028 mJ), adhesive force (0.009 - 0.055 N), chewiness (2.780 - 6.753 N), cohesiveness (0.910 - 0.990), hardness (2.984 - 7.453 N), springiness (0.960 - 1.000), and resilience (0.388 - 0.572), matrix firmness - compression load (2.653 - 6.753 N) and work done (3.288 - 6.829 mJ), rupture (5.315 - 29.016 N), moisture content (< 5%), weight uniformity (< 2.5 g; < 7.5% deviation), and intraoral dissolution pH (≥ 3.5 ≤ 6.8) were quantified to identify measures that may potentially function as specification limits and serve as prospective reference points for evaluating the quality of gummy formulations. Findings from this work contribute to ongoing efforts to standardize the quality control strategies for gummy formulations, particularly those intended for oral drug delivery.

The formation mechanism and textural properties of a complex gel based on soybean glycinin-chitosan complex coacervates: Effects of pH, heat treatment temperature and centrifugation

The soybean glycinin (11S)-chitosan (CS) complex gels with various textural properties were successfully constructed. The process involved the initial formation of 11S-CS coacervates through electrostatic interactions, followed by a heating treatment to obtain the final complex gels. The impacts of pH, heating temperature, and centrifugation on 11S-CS complex gel properties were investigated. The results indicated that the pore arrangement of the gel formed at pH 7.3 was more tightly and uniformly packed than those formed at pH 6.8 and 7.8. Centrifugation facilitated denser and more ordered gel structures at the three pH values, while increasing the heating temperature exhibited the opposite trend at pH 6.8 and 7.8. These structural differences were also reflected in the rheological and textural properties of the gel. The 11S-CS complex gels exhibited an elasticity-based gel property. The textural properties of gels formed at pH 6.8 were stronger compared to those formed at pH 7.3 and 7.8. However, when the 11S-CS coacervates were heated without centrifugation, the resulting gels were weak. This study emphasizes the potential of using protein/polysaccharide associative interactions during gel formation to alter the microstructure of the gel, meeting various production requirements.

Effect of peach gum polysaccharide on the rheological and 3D printing properties of gelatin-based functional gummy candy

Excellent 3D printing materials must exhibit good extrudability and supportability, but these two characteristics are often contradictory. In this study, peach gum polysaccharide (PGP) was added to gelatin to prepare a 3D-printed functional gummy candy encapsulating curcumin. Rheology tests indicated that adding PGP could effectively improve the apparent viscosity and thermal stability and consequently improve the 3D printability and supportability of the products. When PGP addition was 6 %, the printing accuracy was higher than 90 %. Texture and microstructure analysis further revealed that PGP addition promoting a dense gel structure formed and the water holding capacity and supportability of gel materials were enhanced. Furthermore, the in vitro gastrointestinal digestion tests showed that after 6 h of simulated gastrointestinal fluid digestion, the retention rate of curcumin was nearly 80 %. The above results indicated that the composite gel of PGP and gelatin is a good 3D printing base material for nutrient delivery.

Liquid and Pressure-Sensitive Adhesives Based on Cassava Starch and Gelatin Capsule Residue: Green Alternatives for the Packaging Industry

Natural polymer-based adhesives are green alternatives, necessary to reduce the problems impacted by synthetic adhesives. Starch and gelatin have extraordinary potential for the synthesis of biobased adhesives. Citric acid (CA), a natural acid, induces the crosslinking and hydrolyzing of both gelatin and starch. In this sense, this work deals with the use of gelatin capsule residues as a promising material to produce biobased adhesives in combination with cassava starch in the presence of different CA concentrations characterizing their mechanical, physicochemical and microstructural properties. Depending on CA concentration, formulations adjusted to different applications can be obtained such as liquid and pressure-sensitive adhesive films. The inclusion of CA allows us not only to improve the applicability of the system since it modifies the flowability of the adhesives as evidenced by the observed changes in the viscosity (from 158.3 to 90.3 for formulations with 20 and 80% CA, respectively). In addition, mechanical profiles showed that the inclusion of CA increased the adhesive bond strength (from 2230.7 to 2638.7 for formulations with 20 and 80% CA, respectively). Structural modifications induced by CA in adhesive formulations were highlighted by ATR-FTIR analysis.

Effects of gelatin concentration, adding temperature and mixing rate on texture and quality characteristics of model gels

In this study, the effects of gelatin concentrations (GC) (5.0-10.0 g/100 g), mixing rate (MR) (100-1100 rpm), and gelatin addition temperature (GAT) (55, 60, and 65°C) were investigated on the main textural and various physicochemical properties of model gels (n = 72) prepared using sucrose and glucose syrup (40-42 DE). Considering the p-value of the F-statistic calculated by analysis of variance and the 5% significance level, the production parameters and their interactions had a significant effect on the quality parameters. The influence of the production parameters GC, MR, and GAT, and the interaction of these parameters, GC * MR, GC * GAT, MR * GAT, and GC * MR * GAT of the model gels on the quality characteristic were expressed by converting the Type III SS values into percent values. When all quality characteristics were considered together, MR was the most influential with a score of 58%. PCAmix, a combination of factorial analysis with PCA, was used to visualize the correlations between the production parameters and the quality characteristics of the modeled gels. A great influence was observed between MR and moisture content, color properties, and texture parameters, except springiness. A moderate effect of GC and a minor effect of GAT could be characterized. With the 2D-map of observations, the model gels could be clearly divided into two groups according to the MRs. In accordance with the observations diagram of PCAmix, the similarity dendrogram of AHC also formed two clusters, one cluster for the samples with MR 100 and 200 rpm and one cluster for the samples with MR 500 and 1100 rpm.

Changes in the Physicochemical Properties of Chia (Salvia hispanica L.) Seeds during Solid-State and Submerged Fermentation and Their Influence on Wheat Bread Quality and Sensory Profile

This study aimed at investigating the impacts of 24 h of either solid-state fermentation (SSF) or submerged fermentation (SMF) with Lactiplantibacillus plantarum strain No. 122 on the physico-chemical attributes of chia seeds (CS). Furthermore, this study examined how adding fermented chia seeds (10, 20, and 30% concentrations) affected the properties and sensory profile of wheat bread. Acidity, lactic acid bacteria (LAB) viable counts, biogenic amine (BA), and fatty acid (FA) profiles of fermented chia seeds were analysed. The main quality parameters, acrylamide concentration, FA and volatile compound (VC) profiles, sensory characteristics, and overall acceptability of the obtained breads, were analysed. A decline in the concentration of certain BA and saturated FA and an increase in polyunsaturated FA and omega-3 (ω-3) were found in fermented CS (FCS). The same tendency in the FA profile was observed in both breads, i.e., breads with non-fermented CS (NFCS) or FCS. The quality parameters, VC profile, and sensory attributes of wheat bread were significantly affected by the addition of NFCS or FCS to the main bread formula. All supplemented breads had reduced specific volume and porosity, but SSF chia seeds increased moisture and decreased mass loss after baking. The lowest acrylamide content was found in bread with a 30% concentration of SSF chia seeds (11.5 µg/kg). The overall acceptance of supplemented breads was lower than the control bread, but breads with 10 and 20% SMF chia seed concentrations were still well accepted (on average, 7.4 score). Obtained results highlight that fermentation with Lp. plantarum positively contributes to chia seed nutritional value, while incorporation of NFCS and FCS at certain levels results in an improved FA profile, certain sensory attributes, and reduced acrylamide content in wheat bread.

Multifunctional Nutraceutical Composition Based on Fermented Spirulina, Apple Cider Vinegar, Jerusalem Artichoke, and Bovine Colostrum

The main purpose of this experiment was to develop a multifunctional nutraceutical composition based on ingredients of different origins (Spirulina powder (SP), bovine colostrum (BC), Jerusalem artichoke powder (JAP), and apple cider vinegar (ACV)) which possess different health benefits through their different mechanisms of action. In order to improve the functional properties of Spirulina and bovine colostrum, fermentation with the Pediococcus acidilactici No. 29 and Lacticaseibacillus paracasei LUHS244 strains, respectively, was carried out. These LAB strains were chosen due to their good antimicrobial properties. The following parameters were analysed: for Spirulina (non-treated and fermented)-pH, colour coordinates, fatty acid profile, and contents of L-glutamic and GABA acids; for bovine colostrum (non-treated and fermented)-pH, colour coordinates, dry matter, and microbiological parameters (total LAB, total bacteria, total enterobacteria, Escherichia coli, and mould/yeast counts); for the produced nutraceuticals-hardness, colour coordinates, and overall acceptability. It was established that fermentation reduced the pH of the SP and BC and affected their colour coordinates. Fermented SP contained a greater concentration of gamma-aminobutyric and L-glutamic acids (by 5.2 times and 31.4% more, respectively), compared to the non-treated SP and BC. In addition, the presence of gamma-linolenic and omega-3 fatty acids was observed in fermented SP. Fermentation of BC reduces Escherichia coli, total bacteria, total enterobacteria, and total mould/yeast counts in samples. The obtained three-layer nutraceutical (I layer-fermented SP; II-fermented BC and JAP; III-ACV) demonstrated a high overall acceptability. Finally, our finding suggest that the selected nutraceutical combination has immense potential in the production of a multifunctional product with improved functionality and a high acceptability.

Grafting of Methyl Methacrylate onto Gelatin Initiated by Tri-Butylborane-2,5-Di-Tert-Butyl-p-Benzoquinone System

Graft gelatin and poly(methyl methacrylate) copolymers were synthesized in the presence of the tributylborane—2,5-di-tert-butyl-p-benzoquinone (2,5-DTBQ) system. The molecular weight parameters and morphology of the polymer indicate that it has a cross-linked structure. Obtained data confirm the simultaneous formation of a copolymer in two ways: “grafting from” and “grafting to”. It leads to the cross-linked structure of a copolymer. This structure was not obtained for copolymers synthesized in the presence of other initiating systems: azobisisobutyronitrile; tributylborane; azobisisobutyronitrile and tributylborane; azobisisobutyronitrile, tributylborane, and 2,5-di-tert-butyl-p-benzoquinone. In these cases, the possibility of the formation of the copolymer, simultaneously in two ways, was excluded. Graft gelatin and poly(methyl methacrylate) copolymers synthesized in the presence of the tributylborane—2,5-di-tert-butyl-p-benzoquinone system are promising in terms of their use in scaffold technologies due to the three-dimensional mesh structure, providing a high regenerative potential of materials.

Physical Properties and Prebiotic Activities (Lactobacillus spp.) of Gelatine-Based Gels Formulated with Agave Fructans and Agave Syrups as Sucrose and Glucose Substitutes

This research developed model foods of gelatine-based gels, where carbohydrates from Agave tequilana Weber var. Azul (agave syrups or/and agave fructans) were incorporated into gel formulations as healthy sucrose and glucose substitutes. The sugars (sucrose and glucose) were substituted by agave carbohydrates (agave syrups and agave fructans), obtaining the subsequent gel formulations: 100% agave syrup (F2 gel), 100% agave fructan (F3 gel), and 50% agave syrup−50% agave fructan (F4 gel). The unsubstituted gel formulation was used as a control (F1 gel). The prebiotic activities, physical properties, thermal stability (HP-TLC), and texture of gelatine-based gels were evaluated. The gel formulations showed translucent appearances with approximately 36 g/100 g of water and water activities values between 0.823 and 0.929. The HP-TLC analysis validated that agave fructans did not hydrolyse during the thermal process of gels production. Gels produced with agave syrup and agave fructan (F2-F4 gels) provided higher hardness, gumminess, and springiness values (p < 0.05) than those produced with glucose and sucrose (F1 gel). Gelatine-based gel formulations displayed prebiotic activities correlated to the ability of Lactobacillus plantarum, Lactobacillus paracasei, and Lactobacillus rhamnosus to use agave carbohydrates as carbon sources. Based on the prebiotic effect and physical and textural properties, the F2 and F4 gel formulations displayed the best techno-functional properties to produce gel soft candies.