Effect of freezing-thawing pre-treatment on enzymatic modification of corn and potato starch treated with activated α-amylase: Investigation of functional properties

Effect of freezing rates on α-amylase enzymatic susceptibility, in vitro digestibility, and technological properties of starch microparticles

The aim of this study was to evaluate the effect of freezing rates using direct (LF: Liquid nitrogen) and indirect (RF: Cryogenic refrigerator and UF: ultra-freezer) methods at temperatures of (-20, -80, and - 196 °C) on the enzymatic susceptibility with α-amylase for microparticles. In vitro digestibility parameters and technological properties were also analyzed. Lower rates resulted in larger ice crystals, damaging the starch structure. Hydrolysis was more pronounced at slower rates RF: 0.07 °C/min and UF: 0.14 °C/min, yielding maximum values of RDS: 37.63% and SDS: 59.32% for RF. Type A crystallinity remained unchanged, with only a noted increase in crystallinity of up to 6.50% for FR. Starch pastes were classified as pseudoplastic, with RF exhibiting superior textural parameters and apparent viscosity. (RF: 7.18 J g-1 and UF: 7.34 J g-1) also showed lower values of gelatinization enthalpy. Freezing techniques were viable in facilitating the diffusion of α-amylase and reducing RS by up to 81%.

Heat moisture treatment and ultrasound-induced hydrothermal wheat starch modification: Techno-functional, microstructural and quality 3D printed characteristics

In this study, the effect of hydrothermal process, ultrasound and combined freezing-ultrasound process on the physical and structural characteristics of wheat starch (Triticum aestivum) was investigated. Two heat-moisture treatments for 2 h (HMT2) and 4 h (HMT4), high-intensity, high-frequency ultrasound under two treatment times (10 to 20 min) (UT10 and UT20) as pre-treatment and sonication after freezing as post-treatment (FUT) on wheat starch suspension was applied. The modifications of starch crystallinity, chemical bonds of starch treated, morphology, thermal, swelling, pasting, and physicochemical characteristics were evaluated. Finally, the starches treated under these conditions were used as ink for a 3D printer, and the characteristics of the printed product were evaluated. The results demonstrate that heat-moisture modified starch increased swelling and size of granules and lowered syneresis values. Sonication promoted molecular depolymerization and reduction of starch swelling and crystallinity. Combined treatment (Sonication and freezing) showed higher peak apparent viscosity during gelatinization and pasting, and the FUT starch-based hydrogels showed the best printability (better ability to stack layers on top of each other and build the desired 3D shape), indicating better reproducibility of this ink. These results showed that FUT is a suitable process for improving the synergy and properties of wheat starch-based hydrogels, which are suitable as inks for use in 3D printers.

Impact of freeze-thaw cycles on the physicochemical properties and structure-function relationship of potato starch with varying granule sizes in frozen dough

Starch, as a critical component of dough, significantly influences quality preservation during the freezing process. In particular, the fine structure of potato (B-type) starch in frozen processing is a subject of considerable interest. This study aims to investigate the intrinsic differences of B-type starch and the impact of freeze-thaw (F/T) treatment on its molecular structure and physicochemical properties. Chain length distribution and X-ray photoelectron spectroscopy were utilized to examine the structural characteristics of natural potato starch with different granule sizes. Furthermore, the fine structure, thermal properties, and rheological properties of the isolated starches after F/T treatment were analyzed. The results indicate that potato starch with smaller particle sizes exhibits higher surface CC and PO content along with a higher proportion of very short chains (DP < 6, 8.17 %) and long B chains (DP > 25, 20.68 %). The study found that after F/T treatment, the surface of small-sized starch granules was initially damaged, exhibiting threads on the surface centered on the umbilical point. Following F/T treatment, both the crystallinity (very large (VL): 24.52-18.36 %; small (S): 17.03-16.69 %) and short-range order (VL: 2.97-2.61; S: 2.71-2.35) of starch particle size decreased. Both the amylose content (20.88-14.57 %) and ΔH (10.15-8.62 J/g) of isolated starch after freeze-thaw-treated dough exhibited a decrease to varying degrees. With the exception of the fifth cycle, small-size starch particles exhibited relatively higher G' and G" values and showed significant changes as a result of F/T treatment, demonstrating high hardness and complex viscosity. Clarifying the physicochemical properties of potato starches with different granule sizes is expected to expand their applications in frozen dough.

Study on the gelatinization and digestive characteristics of wheat starch and potato starch under low moisture conditions

This study explored the gelatinization and digestive characteristics of wheat and potato starches under low moisture conditions using identical processing parameters. The results revealed that potato starch exhibited greater resistance to digestion than wheat starch, with an enzyme hydrolysis rate 18 % to 30 % lower than wheat starch under the same conditions. The analysis of particle size, swelling power, and low-field NMR demonstrated that potato starch required almost 40 % more moisture for full gelatinization than wheat starch, indicating that low-moisture conditions could not meet the significant water demand of potato starch. Additionally, the DSC analysis showed that potato starch had superior thermal stability, with To of 62.13 °C and ΔH of 16.30 (J/g). Subsequently, the microscopy results showed that the partially gelatinized wheat starch had a rough, porous surface, allowing enzymes for direct access to hydrolysis. In contrast, the potato starch had smoother and less damaged particles without visible pores, enzymes had to degrade it progressively, layer by layer. Furthermore, potato starch still exhibited a lower enzyme hydrolysis rate than wheat starch under the same gelatinization levels. Overall, potato starch is more resistant to hydrolysis and gelatinization in low-moisture environments, making potato starch suitable for low-digestibility products like potato biscuits or chips.

The art and science of porous starch: understanding the preparation method and structure-function relationship

Porous starch (PS), a modified form of starch with unique properties, is attracting substantial attention for its diverse advantages and applications. Its intricate porous structure, crystalline and amorphous characteristics, and hydrophilic-hydrophobic properties stem from pore formation via physical, chemical, enzymatic, and combined synergistic methods. Porous starch offers benefits like improved gelatinization temperature, water absorption, increased surface area, tunable crystallinity, and enhanced functional properties, making it appealing for diverse food industry applications. To optimize its properties, determining the parameters governing porous structure formation is crucial. Factors such as processing conditions, starch source, and modification methods substantially impact porosity and the overall characteristics of the material. Understanding and controlling these parameters allows customization for specific applications, from pharmaceutical drug delivery systems to enhancing texture and moisture retention in food products. To date, studies shedding light on how porosity formation can be fine-tuned for specific applications are fewer. This review critically assesses the existing reports on porous starch, focusing on how preparation methods affect porosity formation, thereby influencing the product's crystallinity/hydrophilic-hydrophobic nature and overall applicability.

Structure-based modification of a-amylase by conventional and emerging technologies: Comparative study on the secondary structure, activity, thermal stability and amylolysis efficiency

α-Amylase is an endo-enzyme that catalyzes the hydrolysis of starch into shorter oligosaccharides. α-Amylase plays a crucial role in various industries. Manipulated α-amylases are of particular interest due to their remarkable amylolysis efficiency and thermostability for large-scale biotechnological processes. The retained catalytic activity of enzymes is decreased according to extreme pH, temperature, pressure, and chemical reagents. Broad industrial applications of α-amylases need special properties such as stability against temperature, pH, and chelators, and also attain reusability, desirable enzymatic activity, efficiency, and selectivity. Considering the biotechnological importance of α-amylase, its high stability is the most critical challenge for its economic viability. Therefore, improving its functionality and stability recently gained much interest. To achieve this purpose, various emerging technologies in combination with conventional methods on α-Amylases with different sources have been conducted. The present review is an attempt to summarize the effect of various conventional methods and emerging technologies employed to date on α-amylase secondary structure, thermal stability, and performance.

Cyclic variable temperature conditioning induces the rapid sweetening of sweet potato tuberous roots by regulating the sucrose metabolism

This study aimed to investigate the influence of cyclic variable temperature conditioning (CVTC) on the rapid sweetening of sweet potato tuberous roots, as assessed through the analysis of sugar metabolism-related compounds and enzyme activities of tubers during storage. The results showed that CVTC effectively preserved the quality of sweet potato tuberous roots, leading to a significant elevation in soluble solids and soluble sugars. The CVTC group displayed sucrose and fructose levels that were 1.72 and 1.46 times higher, respectively, compared to the control group at the 8 d. Additionally, after storage, the activities of β-amylase, sucrose phosphate synthase (SPS), and sucrose synthase (SS) in the CVTC group were increased by 19.85 %, 60.74 %, and 82.48 %, respectively. Conversely, acid convertase (AI) activity showed inhibition of 64.72 %. In conclusion, implementing CVTC enhanced enzymatic activity in β-amylase, SPS, and SS, facilitating starch degradation and sucrose synthesis, which contributed to the overall improvement in the sweetness of sweet potato tubers.

Investigation of ultrasound-assisted starch acetylation by single- and dual- frequency ultrasound based on rheology modelling, non-isothermal reaction kinetics, and flow/acoustic simulation

To achieve wheat starch acetylation (AC) with a high degree of substitution (DS), the acetylation process was carried out using various ultrasonication frequencies, including 25 kHz, 40 kHz, and 25 + 40 kHz. In the second step, wheat starch's ultrasound-assisted acetylation (UAA) is simulated using various approaches including the rheology models, non-isothermal reaction kinetics, and flow/acoustic modelling. The computational fluid dynamics (CFD) simulation solves the non-linear acoustic governing equation to determine the flow field and the amount of delivered ultrasound energy. The acetylated starch increased peak and final viscosity, with the highest values observed for the 25 + 40 kHz frequency than other single frequencies (25 kHz and 40 kHz). The viscosity of the starch is specified based on the experimental data using Herschel-Bulkley, power law, and Casson rheology models. According to differential scanning calorimetry (DSC) analysis, the gelatinization parameters and enthalpy of gelatinization (ΔHgel), were found to be lower in acetylated starches at the frequency of 25 + 40 kHz compared to those at frequencies of 25 kHz and 40 kHz, as well as native starches (NS). Moreover, the gelatinization process is examined by implementing the non-isothermal reaction kinetics to obtain the activation energy and reaction order. Based on the results obtained, implementing sonication at 25 kHz reduces the activation energy by 70.3 % compared to native starch. However, the same parameter is obtained to be 69.9 % and 67.1 % for the application of 40 and 25 + 40 kHz transducers, respectively. Additionally, during the sonication treatment, the yield shear stress increases between 24.1 and 31.8 %, based on the applied frequency. Morphology analysis determined by scanning electron microscopy (SEM) revealed that the surfaces and small granules underwent more damage in acetylated starches at frequencies of 25 kHz and 40 kHz. However, in acetylated starches at 25 + 40 kHz, the larger granules were more affected than the smaller ones.

FTIR, 1H, and 13C NMR Characterization and Antibacterial Activity of the Combination of Euphorbia Honey and Potato Starch

AIM AND OBJECTIVE

In recent years, natural biopolymer (potato starch) hydrogels have been widely used in the field of wound dressing material. This study aimed to develop and characterize a novel antibacterial hydrogel made from potato starch and natural honey.

METHODS

The structure of the composite films was evaluated by Fourier transform infrared (FTIR) and 1H,13C nuclear magnetic resonance (NMR) spectroscopy, and the antibacterial activities were tested by agar diffusion method. FTIR analysis showed chemical interaction between the components of Euphorbia honey (EH) and potato starch hydrogel (PSH).

RESULTS

The 1H-13C NMR and FTIR analyses of EH/PSH confirmed their structure and showed the presence of glucose and hydrocarbon derivatives. After 24 h of incubation, the EH/PSH hydrogel showed good antibacterial activity against three bacterial strains (K.pneumonia, P.mirabilis, and P. aeruginosa) by producing clear inhibition zones of 12.33 ± 1.88 mm, 15.33 ± 0.94, and 10 ± 0 mm, respectively. In addition, K. pneumonia, P. mirabilis, and P. aeruginosa were sensitive to the EH/SPH with a minimum inhibitory concentration (MIC) of 1 %.

CONCLUSION

These results suggest that EH-PS has potential as an alternative candidate to conventional antibiotics.

Influence of enzymatic modification on the basis of improved extrusion cooking technology (IECT) on the structure and properties of corn starch

Enzymatic modification can directly affect the structure and properties of starch, but generally causes high energy consumption in drying process. Improved extrusion cooking technology (IECT) itself is a starch modification technology. In this work, a co-extrusion method of starch with 42 % moisture and enzyme was adopted to reveal the effects of different enzyme dosages on the structure and properties of corn starch. After enzyme treatment on the basis of IECT, starch granules were broken into fragments without the occurrence of clear Maltese cross. R1047/1022 and R995/1022 values, peak intensity of Raman spectra and gelatinization temperature decreased, and the full width at half maximum at 480 cm-1 of Raman spectra raised. Moreover, the bound water proportion decreased from 87.44 % to 85.84 % ∼ 78.67 %, and the maximum light transmittance and dextrose equivalent values increased to 34.13 % and 26.14, respectively. The solubility of starch granules was all above 60 %. Findings supported that the mechanochemical effect of IECT on starch was conducive to the enzymatic modification.

Regulating the physicochemical, structural characteristics and digestibility of potato starch by complexing with different phenolic acids

The effects of ferulic acid (FA), protocatechuic acid (PA), and gallic acid (GA) on the physicochemical characteristics, structural properties, and in vitro digestion of gelatinized potato starch (PS) were investigated. Rapid viscosity analysis revealed that the gelatinized viscosity parameters of PS decreased after complexing with different phenolic acids. Dynamic rheology results showed that phenolic acids could reduce the values of G' and G″ of PS-phenolic acid complexes, demonstrating that the addition of phenolic acids weakened the viscoelasticity of starch gel. Fourier-transform infrared spectra and X-ray diffraction results elucidated that phenolic acids primarily reduced the degree of short-range ordered structure of starch through non-covalent interactions. The decrease in thermal stability and the more porous microstructure of the complexes confirmed that phenolic acids could interfere with the gel structure of the starch. The addition of different phenolic acids decreased the rapidly digestible starch (RDS) content and increased the resistant starch (RS) content, with GA exhibiting the best inhibitory capacity on starch in vitro digestibility, which might be associated with the number of hydroxy groups in phenolic acids. These results revealed that phenolic acids could affect the physicochemical characteristics of PS and regulate its digestion and might be a potential choice for producing slow digestibility starch foods.

Sodium Starch Glycolate (SSG) from Sago Starch (Metroxylon sago) as a Superdisintegrant: Synthesis and Characterization

The characteristics of sago starch exhibit remarkable resemblances to those of cassava, potato, and maize starches. This review intends to discuss and summarize the synthesis and characterization of sodium starch glycolate (SSG) from sago starch as a superdisintegrant from published journals using keywords in PubMed, Scopus, and ScienceDirect databases by Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA 2020). There are many methods for synthesizing sodium starch glycolate (SSG). Other methods may include the aqueous, extrusion, organic solvent slurry, and dry methods. Sago starch is a novel form of high-yield starch with significant development potential. After cross-linking, the phosphorus content of sago starch increases by approximately 0.3 mg/g, corresponding to approximately one phosphate ester group per 500 anhydroglucose units. The degree of substitution (DS) of sodium starch glycolate (SSG) from sago ranges from 0.25 to 0.30; in drug formulations, sodium starch glycolate (SSG) from sago ranges from 2% to 8% w/w. Higher levels of sodium starch glycolate (SSG) (2% and 4% w/w) resulted in shorter disintegration times (within 1 min). Sago starch is more swellable and less enzymatically digestible than pea and corn starch. These investigations demonstrate that sago starch is a novel form of high-yield starch with tremendous potential for novel development as superdisintegrant tablets and capsules.

A review of starch swelling behavior: Its mechanism, determination methods, influencing factors, and influence on food quality

Swelling behavior involves the process of starch granules absorbing enough water to swell and increase the viscosity of starch suspension under hydrothermal conditions, making it one of the important aspects in starch research. The changes that starch granules undergo during the swelling process are important factors in predicting their functional properties in food processing. However, the factors that affect starch swelling and how swelling, in turn, affects the texture and digestion characteristics of starch-based foods have not been systematically summarized. Compared to its long chains, the short chains of amylose easily interact with amylopectin chains to inhibit starch swelling. Generally, reducing the swelling of starch could increase the strength of the gel while limiting the accessibility of digestive enzymes to starch chains, resulting in a reduction in starch digestibility. This article aims to conduct a comprehensive review of the mechanism of starch swelling, its influencing factors, and the relationship between swelling and the pasting, gelling, and digestion characteristics of starch. The role of starch swelling in the edible quality and nutritional characteristics of starch-based foods is also discussed, and future research directions for starch swelling are proposed.

Effect of melting combined with ice recrystallization on porous starch preparation: Pore-forming properties, granular morphology, functionality, and multi-scale structures

In this work, critical melting (CM) combined with freeze-thawing treatment (FT, freezing at -20 ℃ and -80 ℃, respectively) was used to prepare porous starch. The results showed that CM combined with the slow freezing rate (-20 ℃) can prepare porous starch with characteristics of grooves and cavities, while combined with the rapid freezing rate (-80 ℃) can prepare with holes and channels, especially after repeating FT cycles. Compared with the native counterpart, the specific surface area, pore volume, and average diameter of CMFT-prepared porous starch were significantly increased to 4.07 m2/g, 7.29 cm3/g × 10-3, and 3.57 nm, respectively. CMFT significantly increased the thermal stability of starch, in which the To, Tp, and Tc significantly increased from 63.32, 69.62, and 72.90 (native) to ∼69, 72, and 76 °C, respectively. CMFT significantly increased water and oil absorption of porous starch from 91.20 % and 72.00 % (native) up to ∼163 % and 94 %, respectively. Moreover, CMFT-prepared porous starch had a more ordered double-helical structure, which showed in the significantly increased relative crystallinity, semi-crystalline lamellae structure, and the proportion of the double helix structure of starch. The synergistic effect of melting combined with ice recrystallization can be used as an effective way to prepare structure-stabilized porous starch.

Effect of pre-gelatinization on α-amylase-catalyzed hydrolysis of corn starch under moderate electric field

This study aimed to explore the roles of starch structure in α-amylase-catalyzed hydrolysis under moderate electric field (MEF). Corn starch was gelatinized by controlling the temperature procedure of rapid viscos-analysis, and then the pre-gelatinized starch (3.0 g) was treated by MEF (2.5 and 5 V/cm) in the presence of α-amylase (1.5 mL). Only a slight hydrolysis occurred for native starch, showing minor increases in reducing sugar content (RSC, ∼0.19 mg/mL), slight changes in granular and semicrystalline structure, and decreases in thermostability (the maximum decomposition temperature (T_max) decreased from 322 to 300 °C). The densely-packed semicrystalline within starch granules was destroyed by pre-gelatinization, thus enhancing the hydrolysis and further decreasing the thermostability, presenting RSC values of 0.63-0.92 mg/mL and T_max of 291-292 °C. Moreover, some special crystals were formed by IEF-induced orientation of hydrolyzed starch chains. Overall, these results confirmed that the semicrystalline structure of starch dominated in MEF-assisted hydrolysis, which could provide guidance for the application of electro-based techniques in starch modification.