Interaction between soybean oleosome-associated proteins and phospholipid bilayer and its influence on environmental stability of luteolin-loaded liposomes

Structural characteristics and stability analysis of coconut oil body and its application for loading β-carotene

In this work, we investigated structural characteristics and stability analysis of the coconut oil body (COB) and its application for loading β-carotene (β-CA). The COB contained neutral lipids (81.1 ± 2.1 %), membrane proteins (0.6 ± 0.0 %), and moistures (18.3 ± 3.2 %), in which the molecular weights of membrane proteins ranged from 12 kDa to 40 kDa, as analyzed by the SDS-PAGE. The COB exhibited a small droplet diameter (5.1 ± 0.3 µm) with a monomodal diameter distribution, as reflected by the dynamic light scattering. The COB showed stable states at alkaline pH values (pH 8-10) and instability against ionic strengths (50-200 mmol/L) and thermal treatment (30-90℃) after analyzing the instability indexes. COB-based emulsions were favorable for the loading and retention of β-CA, as reflected by free fatty acids release rates and bioaccessibility in the simulated gastrointestinal digestion. This study will contribute to using the coconut oil bodies for loading bioactive nutraceuticals to enhance their bioaccessibility.

The improvement of tyrosol bioavailability by encapsulation into liposomes using pH-driven method

To improve the poor water solubility and oral bioavailability of tyrosol, novel tyrosol liposomes (Tyr-LPs) were prepared by pH-driven method. Fourier transform infrared (FTIR) absorption spectra and X-ray diffraction (XRD) analysis indicated that Tyr-LPs were successfully encapsulated and tyrosol was in an amorphous state in liposomes. When tyrosol content in Tyr-LP was 1.33 mg/ml and the Tyr:LP (mass ratio) = 1:2, favorable dispersibility of Tyr-LP was exhibited, with an instability index of 0.049 ± 0.004, PDI of 0.274 ± 0.003, and the EE of 94.8 ± 2.5 %. In vivo pharmacokinetic studies showed that after oral administration of tyrosol or Tyr-LP (Tyr:LP = 1:2), concentration-versus-time curve (AUC0-720mins) and maximum concentration (Cmax) values of Tyr-LP was respectively 1.5-fold (P < 0.01) and 2.25-fold (P < 0.01) higher than tyrosol, which indicated that the oral bioavailability of tyrosol was effectively improved in Tyr-LPs. Our study thereby provides theoretical support for the application of Tyr-LP for optimal delivery of tryosol.

Liposomes decorated with β-conglycinin and glycinin: Construction, structure and in vitro digestive stability

Liposomes were modified with different proportions of β-conglycinin (7S) and glycinin (11S) to form Lip-7S and Lip-11S. The morphology, interaction and in vitro simulated digestion of liposomes were studied. The particle size of Lip-7S was smaller than that of Lip-11S. When the values of Lip-7S and Lip-11S were 1:1 and 1:0.75, respectively, the ζ-potential had the maximum absolute value and the dispersion of the system was good. The results of multispectral analysis showed that hydrogen-bond and hydrophobic interaction dominated protein-modified liposomes, the protein structure adsorbed on the surface of liposomes changed, the content of α-helix decreased, and the structure of protein-modified liposomes became denser. The surface hydrophobicity and micropolarity of liposomes decreased with the increase of protein ratio, and tended to be stable after Lip-7S (1:1) and Lip-11S (1:0.75). Differential scanning calorimetry showed that Lip-7S had higher phase transition temperature (≥170.5 °C) and better rigid structure. During simulated digestion, Lip-7S (22.5 %) released less Morin than Lip (40.6 %) and Lip-11S (26.2 %), and effectively delayed the release of FFAs. The environmental stability of liposomes was effectively improved by protein modification, and 7S had better modification effect than 11S. This provides a theoretical basis for 7S and 11S modified liposomes, and also provides a data reference for searching for new materials for stabilization of liposomes.

Phospholipid Membranes as Chemically and Functionally Tunable Materials

The sheet-like lipid bilayer is the fundamental structural component of all cell membranes. Its building blocks are phospholipids and cholesterol. Their amphiphilic structure spontaneously leads to the formation of a bilayer in aqueous environment. Lipids are not just structural elements. Individual lipid species, the lipid membrane structure, and lipid dynamics influence and regulate membrane protein function. An exciting field is emerging where the membrane-associated material properties of different bilayer systems are used in designing innovative solutions for widespread applications across various fields, such as the food industry, cosmetics, nano- and biomedicine, drug storage and delivery, biotechnology, nano- and biosensors, and computing. Here, the authors summarize what is known about how lipids determine the properties and functions of biological membranes and how this has been or can be translated into innovative applications. Based on recent progress in the understanding of membrane structure, dynamics, and physical properties, a perspective is provided on how membrane-controlled regulation of protein functions can extend current applications and even offer new applications.

WPI-coated liposomes as a delivery vehicle for enhancing the thermal stability and antioxidant activity of luteolin

The practical application of luteolin in food systems faces challenges due to its inherent instability. This study aimed to develop luteolin-loaded liposomes coated with whey protein isolate (WPI) to enhance the thermal stability and antioxidant activity of luteolin. The physical characteristics of both luteolin-loaded liposomes (LUT-Lips) and WPI-coated luteolin-loaded liposomes (WPI-LUT-Lips) were assessed. At a 5% WPI concentration, WPI-LUT-Lips demonstrated excellent dispersibility and improved encapsulation efficiency. WPI interacted with the liposome membrane via hydrophobic forces, hydrogen bonding, and electrostatic contact force, resulting in an efficient coating. Differential scanning calorimetry confirmed that WPI-LUT-Lips exhibited greater thermal stability compared to LUT-Lips, attributed to the protective effect of the WPI. Furthermore, WPI-LUT-Lips displayed superior antioxidant activity, as evidenced by their DPPH scavenging activity (86.36 ± 1.95%), TBARS reduction (25.33 ± 1.90%), and reducing power (82.86 ± 1.42%). Therefore, WPI-coated luteolin-loaded liposomes offer a promising way to enhance luteolin's integration into food systems.

Artificial oil bodies: A review on composition, properties, biotechnological applications, and improvement methods

In order to simulate the structure of natural oil body, artificial oil bodies (AOBs) are fabricated by the integration of oleosins, triacylglycerols (TAGs) and phospholipids (PLs) in vitro. Recently, AOBs have gained great research interest both in the food and biological fields due to its ability to act as a novel delivery system for bioactive compounds and as a carrier for target proteins. This review aims to summarize the composition and the preparation methods of AOBs, examine the factors influencing their stability. Moreover, this contribution focusses on exploring the application of AOBs to encapsulate functional ingredients that are prone to oxidation as well as improve efficiency involved in protein purification, renaturation and immobilization by reducing the complex steps. In addition, the improvement measures to further enhance the stability and efficacy of AOBs are also discussed. The application of AOBs is expected to be a big step towards replacing existing bioreactors and delivery systems.

Liposomes encapsulation by pH driven improves the stability, bioaccessibility and bioavailability of urolithin A: A comparative study

Urolithin A (UroA) is gut metabolites of ellagitannins possessing a vast range of biological activities, but its poor water solubility and low bioavailability hinder its potential applications. This study utilized the pH dependent dissolution characteristics of UroA and employed a simple pH-driven method to load UroA into liposomes. The characterization and stability of obtained liposomes under different conditions were evaluated, and their oral bioavailability was tested by pharmacokinetics, and compared with UroA liposomes prepared using traditional thin film dispersion (TFM-ULs). Results indicated that liposomes could effectively encapsulate UroA. The UroA liposomes prepared by the pH-driven method (PDM-ULs) showed lower particle size, polydispersity index, zeta potential, and higher encapsulation efficiency than TFM-ULs. Interestingly, better thermal stability, storage stability, in vitro digestion stability, and higher bioaccessibility were also found on PDM-ULs. Moreover, pharmacokinetic experiments in rats demonstrated that PDM-ULs could significantly improve the bioavailability of UroA, with an absorption efficiency 1.91 times that of TFM-ULs. Therefore, our findings suggest that liposomes prepared by pH-driven methods have great potential in improving the stability and bioavailability of UroA.

Enhancement of liposomal properties of thyme essential oil using lysozyme modification: Physicochemical, storage, and antibacterial properties

Thyme essential oil (TEO) is a natural food antimicrobial agent derived of spice, but suffers from volatility and poor water solubility, which problem can be effectively solved by the encapsulation of liposomes. On this basis, a safe and common natural antibacterial protein, LYZ was used to modify the TEO liposomes (TEO-lips) for gaining better properties. 2.5 mg/mL TEO and 0.05 % LYZ/S100 mass ratio were the best formula for the preparation of LYZ-TEO-lips. After LYZ modification, the particle size and PDI increased, and the zeta potential decreased slightly. The modification of LYZ not only improves the thermal stability of TEO-Lips, weakens the influence of acid and salt ions on liposomes, but also improves the antibacterial properties of TEO-Lips. In brief, LYZ has the potential to improve the overall properties of liposomes and can provide a reference for the development of antimicrobial liposomes.

Nano-scale drug delivery systems for luteolin: advancements and applications

Luteolin (Lu) is a naturally occurring flavonoid compound with a diverse array of pharmacological activities, including anti-tumor, anti-inflammatory, antibacterial, and neuroprotective properties. However, the therapeutic efficacy and clinical application of Lu are significantly hindered by inherent limitations, such as poor water solubility, short half-life, low bioavailability, and potential off-target toxicity. Recent studies have demonstrated that the utilization of nanocarriers presents a promising strategy to enhance the solubility of Lu, prolong its circulation time, and improve its targeting ability. Despite numerous reviews over the past few decades having focused on the source, pharmacological activities, and molecular mechanisms of Lu, there exists a conspicuous gap in the literature regarding a comprehensive review of Lu-loaded nanoformulations and their applications. To address this gap, we present an exhaustive overview of the advancements and applications of nano-scale drug delivery systems specifically designed for Lu. These platforms encompass micelles, nanocarrier-based systems, emulsified drug delivery systems, and vesicular drug delivery systems. We provide detailed insights into the synthetic materials, preparation methods, physicochemical properties, and significant outcomes associated with these nanoformulations. This systematic review will be particularly valuable to researchers seeking novel avenues in the field of nano-delivery strategies and exploring the potential clinical applications of Lu.

Glycolipids improve the stability of liposomes: The perspective of bilayer membrane structure

The storage and thermal stability of liposomes, which are amphiphilic carriers, cause very large challenges. However, glycolipid modification may be a potential method to improve the stability of liposomes. In this study, the mechanism by which tilapia head glycolipids improve the stability of liposomes was studied. The head groups of glycolipids and liposomes have a strong interaction (K_a = 633.650 M^-1), mainly due to hydrogen bonds, which promote the formation of microstructure domains between glycolipids and liposomes. In addition, glycolipids caused the bilayer structure of liposomes to rearrange, resulting in an increase in the phase transition temperature, tight arrangement of membrane molecules, and increase in membrane thickness (from 2.4 nm to 3.5 nm). Novelty, the formation of microstructure domains helped prevent the liposomes membrane structure from being disrupted during storage and heat. Therefore, glycolipid modification improved the stability of liposomes. This study can provide new insights into the development of high-stability liposomes.

D-α-tocopherol polyethylene glycol 1000 succinate-based microemulsion delivery system: Stability enhancement of physicochemical properties of luteolin

In the present study, D-α-Tocopherol polyethylene glycol 1000 succinate-based self-microemulsifying drug delivery systems (TPGS-SMEDDS) were introduced to enhance the solubility and stability of luteolin. The ternary phase diagrams were constructed to obtain the maximum area of microemulsion and suitable formulations of TPGS-SMEDDS. The particle size distribution and polydispersity index of selected TPGS-SMEDDS were analyzed to be less than 100 nm and 0.4, respectively. The thermodynamic stability results suggested that the TPGS-SMEDDS was stable during the heat-cool and freeze-thaw cycle. Moreover, the TPGS-SMEDDS exhibited excellent encapsulation capacity (51.21 ± 4.39 to 85.71 ± 2.40%) and loading efficiency (61.46 ± 5.27 to 102.86 ± 2.88 mg/g) to luteolin. In addition, the TPGS-SMEDDS showed an admirable vitro release ability with a ratio of more than 88.40 ± 1.14% for luteolin in 24 h. Therefore, TPGS-based SMEDDS might provide an effective role for the oral administration of luteolin and holds promise as a potential delivery for poorly soluble bioactive compounds.

Bitterness-masking assessment of luteolin encapsulated in whey protein isolate-coated liposomes

An unacceptable bitter taste limits the application of luteolin in healthier food systems. In this study, a bitterness-masking assessment was performed on whey protein isolate-coated liposomes loaded with luteolin (WPI-coated liposomes) using an electronic tongue and human sensory test. The physical properties of the WPI-coated colloidal nanocarrier were characterized by zeta potential, average diameter, distribution, and morphology analyses. The results indicated that WPI-coated nanocarrier systems exhibited a uniformly dispersed distribution and spherical morphology. After the comparison of the bitterness value, the bitterness-reducing effect of 5% WPI-coated liposomes was the most significant and reduced the bitterness of luteolin by 75%. Raman spectroscopy and X-ray diffraction analysis demonstrated that the decoration of WPI on the liposomes reduced the free motion of lipid molecules. This promoted the ordering at the polar headgroup area and hydrophobic core of the lipid bilayer, which explained why luteolin-loaded liposomes (uncoated liposomes) and WPI-coated liposomes could reduce the bitterness of luteolin from the perspective of bitter molecular groups. Combined with the Raman spectral data, the bilayer rigidity of 5% WPI-coated liposomes was positively responsive to the stabilization of uncoated liposomes against storage and resistance ability against surfactants. It was proven that the emergence of the surface modification of the WPI coating enhanced the stability of uncoated liposomes. These results may contribute to the use of WPI-coated liposomes as prospective candidates for effective delivery of the bioactive bitter substance in nutraceuticals and functional foods.

Recent Progress of Lipid Nanoparticles-Based Lipophilic Drug Delivery: Focus on Surface Modifications

Numerous drugs have emerged to treat various diseases, such as COVID-19, cancer, and protect human health. Approximately 40% of them are lipophilic and are used for treating diseases through various delivery routes, including skin absorption, oral administration, and injection. However, as lipophilic drugs have a low solubility in the human body, drug delivery systems (DDSs) are being actively developed to increase drug bioavailability. Liposomes, micro-sponges, and polymer-based nanoparticles have been proposed as DDS carriers for lipophilic drugs. However, their instability, cytotoxicity, and lack of targeting ability limit their commercialization. Lipid nanoparticles (LNPs) have fewer side effects, excellent biocompatibility, and high physical stability. LNPs are considered efficient vehicles of lipophilic drugs owing to their lipid-based internal structure. In addition, recent LNP studies suggest that the bioavailability of LNP can be increased through surface modifications, such as PEGylation, chitosan, and surfactant protein coating. Thus, their combinations have an abundant utilization potential in the fields of DDSs for carrying lipophilic drugs. In this review, the functions and efficiencies of various types of LNPs and surface modifications developed to optimize lipophilic drug delivery are discussed.

Development of Solid Lipid Nanoparticle-Loaded Polymeric Hydrogels Containing Antioxidant and Photoprotective Bioactive Compounds of Safflower (Carthamus tinctorius L.) for Improved Skin Delivery

Safflower (Carthamus tinctorius L.) is a potent natural antioxidant because of active compounds such as quercetin (QU) and luteolin (LU). These components prevent damage to the skin caused by free radicals from UV rays. However, due to the poor solubility and transdermal permeation, the effectiveness of the compounds in showing their activity was limited. In this study, we develop solid lipid nanoparticle (SLN)-based hydrogel formulations to enhance the solubility and penetration of two bioactive compounds found in safflower petals extract (SPE). The hot emulsification-ultrasonication method was used to produce SLNs, and to obtain high antioxidant activity, 100% v/v ethanol was used in the extraction procedure. The results showed that this approach could encapsulate >80% of both QU and LU. Moreover, Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), and powder X-ray diffraction (PXRD) spectra indicated that most of the QU and LU were trapped in a lipid matrix and dispersed homogeneously at the molecular level, increasing the solubility. Additionally, SLN-hydrogel composites are able to release two lipophilic bioactive compounds for 24 h, which also demonstrated increased skin retention and penetrability of the QU and LU up to 19-fold. In vitro blood biocompatibility showed that no hemolytic toxicity was observed below 500 μg/mL. Accordingly, the formulation was considered safe for use. Sun protective factor (SPF) test shows a value above 15, showing an excellent promising application as the photoprotective agent to prevent symptoms associated with photoinduced skin aging.

Liposomes for encapsulation of liposoluble vitamins (A, D, E and K): Comparation of loading ability, storage stability and bilayer dynamics

To understand the encapsulation difference and stability mechanism of nanoliposomes (NLPs) loaded with different kinds and loads of liposoluble vitamins (LSV, including VA, VD, VE, and VK), the physicochemical stability during three-months storage and bilayer membrane properties of LSV-NLPs were evaluated. The results suggested that VD and VE were not suitable for high-load (≥30 wt%) encapsulation, but the stability of other LSV-NLPs was excellent during storage. Their particle size was less than 100 nm, the polydispersity index was less than 0.3, and the retention rate of VE and VK remained above 85 %. LSV encapsulation inhibited malondialdehyde production, decreased liposome surface roughness, and improved nanoliposome rigidity. The order of occupying capacity of LSV to the hydrophobic zone of the bilayer was VK＞VD＞VE＞VA, and the stability of LSV located in the hydrophobic region was better. Except for high-load VD and VE, the other LSV encapsulation increased the microviscosity of the lipid-water interface and hydrophobic zone by 0.5 ∼ 7.1 times and 0.5 ∼ 20 times, respectively. The accumulation of acyl chain was enhanced by 0.2 ∼ 4 times, and the interchain longitudinal and intra-chain transverse order degree was increased by 10.89 %∼144.35 % and 3.26 %∼115.52 %, respectively. High microviscosity and tight chain stacking limited bilayer fluidity and thus improve LSV-NLPs stability. This work will contribute to the application of nanoliposomes as liposoluble vitamin carriers in the food industry.