Confirmation and understanding the potential emulsifying characterization of persimmon pectin: From structural to diverse rheological aspects

Insights into the Pickering emulsions stabilized by yeast dietary fiber: Interfacial adsorption kinetics, rheological characteristics, and stabilization mechanisms

This study developed Pickering emulsions based on yeast dietary fiber (YDF) and investigated the interfacial adsorption kinetics of YDF, rheological properties and stabilization mechanisms of emulsions. Results indicated that increasing YDF concentration enhanced its diffusion and rearrangement at the oil-water interface. At a concentration of 8 %, YDF exhibited the highest diffusion rate (0.1406 mN·m-1·s-0.5) and rearrangement rate (18.8 s-1). The emulsion stabilized at this concentration had the smallest droplet size (1.55 μm) and the slowest droplet migration rate (0.34 mm/h), effectively suppressing droplet aggregation due to collisions and thereby improving the overall emulsion stability. Confocal laser scanning microscopy results confirmed that emulsion stability relied on the co-adsorption of proteins and polysaccharides from YDF at the interface, with proteins primarily adsorbed at the oil-water interface and polysaccharides responsible for the continuous phase network formation. This study demonstrates YDF's potential as an emulsion stabilizer and elucidates the stabilization mechanism of YDF-induced emulsion.

A critical review of persimmon-derived pectin: Innovations in extraction, structural characterization, biological potentials, and health-promoting effects

Persimmon-derived pectin (PP) is a versatile dietary polysaccharide with considerable industrial and biological significance, demonstrating a range of functionalities and health-promoting benefits. This review explores the changes in PP during postharvest and processing, detailing structural alterations and extraction techniques for optimal characteristics. Key functional attributes of PP-such as emulsification, rheology, antioxidant capacity, immunomodulation, and gut microbiota regulation-highlight its potential applications in food, healthcare, pharmaceuticals, and cosmetics. The review also explores methods to enhance the functional properties of PP through synergistic interactions with polyphenols. A strategic roadmap for advancing PP research is proposed, connecting extraction methods, structural characteristics, and functional properties to tailor PP for specific applications in food science and technology. Overall, persimmon-derived pectin is positioned as a valuable food-derived bioactive ingredient with diverse capabilities, poised to drive innovation and advance nutritional science across multiple sectors.

Research progress on extraction techniques, structure-activity relationship, and biological functional mechanism of berry polysaccharides: A review

In recent years, polysaccharides extracted from berries have received great attention due to their various bioactivities. However, the preparation and application of berry polysaccharides have been greatly limited due to the lack of efficient extraction techniques, unclear structure-activity relationships, and ambiguous functional mechanisms. This review discusses the technological progress in solvent extraction, assisted extraction, critical extraction, and combination extraction. The structure-activity relationship and functional mechanism (antioxidation, hypoglycemic, immunoregulation etc.) of berry polysaccharides are reviewed. After systematic exploration, we believe that industrial production is more suitable for using efficient and low-cost extraction methods, such as ultrasonic assisted extraction and microwave assisted extraction. And some of the bioactivities (antioxidant activity, hypoglycemic activity, etc.) of berry polysaccharides are closely related to their structure (molecular weight, monosaccharide composition, branching structure, etc.). Besides, berry polysaccharides exhibit bioactivities by regulating enzyme activity, cellular metabolism, gene expression, and other pathways to exert their effects on the body. These findings indicate the potential of berry polysaccharides as functional foods and drugs. This paper will contribute to the preparation, bioactivity research, and application of berry polysaccharides.

Unlocking the potential of persimmons: A comprehensive review on emerging technologies for post-harvest challenges, processing innovations, and prospective applications

Persimmons are widely acknowledged as a valuable source of both medicinal and nutritional components, providing a diverse spectrum of nutrients and phytochemicals. Despite these benefits, biases against persimmons persists due to their characteristic astringent flavor that sets them apart from other fruits. Although several studies have explored various aspects of persimmons, a comprehensive review that addresses post-harvest challenges, processing innovations, and potential applications is notably absent in the literature. This review aims to fill this gap by discussing a range of topics, including emerging preservation technologies, methods for detecting and eliminating astringency, identification of functional elements, health-promoting prospects, and advancements in processed persimmon products. The primary objective is to enhance the utilization of persimmons and promote the development of diverse, customized products, thereby fostering the emergence of functional and futuristic foods.

Bovine serum albumin-liposome stabilized high oil-phase emulsion: Effect of liposome ratio on interface properties and stability

This study aimed to solve the issue of poor lipophilicity of natural bovine serum albumin (BSA) by combining with liposomes (Lips) to stabilize high oil-phase emulsions (HOPEs). The interaction between BSA and Lips was mainly driven by hydrophobic forces, followed by hydrogen bonding. The secondary structure and tertiary structure of BSA were characterized and indicated that the addition of Lips promoted the structural expansion of BSA exposing the hydrophobic groups inside. Interfacial adsorption behaviours were assessed through dynamic interfacial tension, three-phase contact angle, and quartz crystal microbalance with dissipation. These results indicated that BSA-Lips crosslinking improved wettability, promoting adsorption and rearrangement at the oil-water interface, thereby resulting in a dense interfacial layer. The emulsifying efficacy of BSA-stabilized HOPEs also displayed a distinct Lips dependency. Varying the BSA-to-Lips ratio transformed their consistency from flowing to semi-solid, reinforcing the gel network. Under optimal conditions (BSA: Lips = 1:1), the droplet size of BSA-Lips stabilized HOPEs reached a minimum with a highly uniform distribution. Moreover, a 1:1 BSA to Lips ensured outstanding storage, thermal, and centrifugal stability for the HOPEs. This work provides valuable references for the interaction between protein and Lips, guiding the development of highly stable HOPEs stabilizers.

Comparison on emulsifying and emulgelling properties of low methoxyl pectin with varied degree of methoxylation from different de-esterification methods

Low methoxyl pectin (LMP) with different degree of methoxylation (DM, 40-50 %, 20-30 % and 5-10 %) were prepared from commercially available citrus pectin using high hydrostatic pressure assisted enzymatic (HHP-pectin) and traditional alkaline (A-pectin) de-esterification method. The results showed that both de-esterification methods and DM exhibited LMPs with varied physicochemical, structural, and functional properties. As the DM decreased, LMP showed a decrease in molecular weight (Mw), while an increase in negative charges and rhamnogalacturonan I (RG-I) ratio, accompanied with better emulsion stability, emulsion gel strength and water-holding properties. Relative to A-pectin, HHP-pectin had higher Mw and lower RG-I side chain ratio, contributing to its better thermal stability, apparent viscosity, and emulgelling properties. HHP-pectin with lower DM (5-10 %) showed superior thickening, emulsifying and emulgelling properties, while that with higher DM (40-45 %) had superior thermal stability, which provided alternative for de-esterification and targeted structural modification of pectin.

Chemical characterization-function relationship of pectins from persimmon fruit within different ripeness

This study investigated the structural and functional characteristics of two different molecular weight persimmon pectin extracted from unripe persimmon (PP-1) and ripe persimmon (PP-2). The molecular weight was determined as 117.8 kDa and 61.3 kDa for PP-1 and PP-2, which consisting of glucose, rhamnose, mannose, galactose, and xylose. AFM results indicated PP-1 with many linear chains, and short chains in while short chains, branching points, and heterogeneous clumps were found in PP-2.Emulsion characterization and storage stability experiments revealed that PP-1 with more stable emulsifying properties than PP-2 and commercial citrus pectin. In vitro fermentation of PP-1 and PP-2 by gut microbiota indicated that PP-1 and PP-2 groups were higher than inulin group in total SCFAs production after 48 h of fermentation. This study provided useful information for high value utilization of persimmon pectin.

Effect of polysaccharide addition on food physical properties: A review

The texture, flavor, performance and nutrition of foods are affected by their physical properties during processing, cooking, storage, and shelf life. In addition to chemical, physical, and enzymatic modification methods, polysaccharide addition is also considered a safe, effective, and convenient food modification strategy. However, thus far, literature review on the effects of polysaccharides on the physical properties of foods is few. Therefore, the present work reviews the effects of polysaccharides on water retention capacity, rheological property, suspension ability, viscoelasticity, emulsifying property, gelling property, stability, and starch regeneration and digestion. Furthermore, the existing problems and future recommendations during food physical property modification by polysaccharides are presented. This work aims to provide some theoretical references for future research, development, and application of polysaccharides on food physical property modification.

Structural, chemical and technofunctional properties pectin modification by green and novel intermediate frequency ultrasound procedure

The impact of intermediate frequency ultrasound (IFUS, 582, 864 and 1144 kHz), mode of operation (continue and pulsed) and ascorbic acid (Aa) addition on the structural, chemical and technofunctional properties of commercial citrus high methoxyl-grade pectin (HMP) was investigated. The chemical dosimetry of IFUS, monitored by the triiodide formation rate (I3-), demonstrated that the pulsed ratio (1900 ms on/100 ms off) at the three frequencies was similar to that of continue mode but IFUS1144 kHz produced more acoustic streaming demonstrated by the height liquid measured using image analysis. In presence of Aa, HMP presented higher fragmentation than in its absence. IFUS did not give rise any changes in the main functional groups of the HMP. In general, a reduction in molecular weight was observed, being the presence of Aa the most influencing factor. Regarding monosaccharides, IFUS modified the structure of homogalacturonan and rhamnogalacturonan-I and increased of GalA contents of the HMP in presence of Aa at the above three frequencies. A reducing of the consistency index (k) and increasing of the flow index (n) of HMP were showed by IFUS frequency and Aa addition. The emulsifying activity and stability index were increased for HMP treated by IFUS in continue mode at all frequencies and in presence of Aa. The results presented in this research shown the effectiveness of IFUS as tool to modify pectin into different structures with different functionalities.

NADES assisted integrated biorefinery concept for pectin recovery from kinnow (Citrus reticulate) peel and strategic conversion of residual biomass to L(+) lactic acid

The present study aims to establish an integrated strategy for valorization of kinnow peel waste. A total of ten natural deep eutectic solvents (NADESs) were exploited for extraction of pectin. The highest yield of pectin enriched material was reported 35.66 % w/dw using choline chloride-Maltose based NADES. The extraction process parameters and chemical composition of NADES influenced the yield and different associated physico-chemical attributes of the pectin enriched material. All the recovered pectin enriched materials found to be composed of low methoxy pectin (degree of methylation: 18.41-40.26 %) and galacturonic acid (GalA) content was in range of 67.56-78.22 %. The Principal Component Analysis (PCA) was used to categorise isolated pectin enriched materials based on similarities and differences. The liquid fraction upon pectin extraction presented a considerable amount of fermentable sugar which was further utilized for lactic acid production by microbial intervention. The microbial strain Lactobacillus amylophilus GV6 was exploited for lactic acid fermentation where the highest yield reached 55.59 g/L. A sustainable and straight-forward biorefinery concept was developed for extraction of pectin enriched material and lactic acid production from kinnow peel waste with potential application in food and biotechnological sectors.

A galacturonic acid-rich polysaccharide from Diospyros kaki peel: Isolation, characterization, rheological properties and antioxidant activities in vitro

This research elucidated the structural characteristics and antioxidant activity of a galacturonic acid-rich polysaccharide (PPP-2) isolated from Diospyros kaki peel. PPP-2 was extracted by subcritical water and subsequently purified by DEAE-Sepharose FF column. PPP-2 (12.28 kDa) mainly contained galacturonic acid, arabinose, and galactose with the molar ratios of 87.15: 5.86: 4.31. The structural characteristics of PPP-2 were revealed through FT-IR, UV, XRD, AFM, SEM, Congo red, methylation, GC/MS assay and NMR spectrum. PPP-2 owned the triple helical structure and degradation temperature of 251.09 ℃. The backbone of PPP-2 was formed by →4)-α-d-GalpA-6-OMe-(1→ and →4)-α-d-GalpA-(1→ with the side chains of →5)-α-l-Araf-(1→, →3)-α-l-Araf-(1→, →3,6)-β-d-Galp-(1→ and α-l-Araf-(1→. Moreover, the inhibitory concentration (IC₅₀) of PPP-2 to ABTS•+, DPPH•, superoxide radical and hydroxyl radical were 1.96, 0.91, 3.63, and 4.08 mg/mL, respectively. Our results suggested that PPP-2 might be a novel candidate of natural antioxidant in pharmaceuticals or functional food.

Application of Persimmon Pectin with Promising Emulsification Properties as an Acidified Milk Drinks Stabilizer

The present study aimed to evaluate the capability of persimmon pectin (PP) as a stabilizer for acid milk drinks (AMDs) compared with commercial high-methoxyl pectin (HMP) and sugar beet pectin (SBP). The effectiveness of pectin stabilizers was assessed by analyzing particle size, micromorphology, zeta potential, sedimentation fraction, storage, and physical stability. Results of CLSM images and particle size measurements showed that PP-stabilized AMDs had smaller droplet sizes and more uniform distributions, indicating better stabilization potential compared with the HMP- and SBP-stabilized AMDs. Zeta potential measurements revealed that the addition of PP significantly increased the electrostatic repulsion between particles and prevented aggregation. Moreover, based on the results of Turbiscan and storage stability determination, PP exhibited better physical and storage stability compared with HMP and SBP. The combination of steric repulsion and electrostatic repulsion mechanisms exerted a stabilizing effect on the AMDs prepared from PP. Overall, these findings suggest that PP has promising potential as an AMD stabilizer in the food and beverage industry.

Influence of hemin on structure and emulsifying properties of soybean protein isolate

Hemin has potential application value in plant-based meat analogues. However, mechanisms of interaction between hemin and plant protein are unclear. In this study, soy protein isolate (SPI) was applied to examine these interactions using multi-spectroscopic and molecular docking techniques. Additionally, the influence of hemin on emulsification of SPI was also explored. Fluorescence and UV-Vis spectra showed quenching of SPI by hemin was static, resulting in conformation changes on the surface amino acid residues, around which hydrophobicity was significantly reduced from 425.9 ± 16.2 to 108.9 ± 1.8 (p < 0.05). FTIR and CD spectra results suggested the protein secondary structure altered, and the content of α-helix and random coils increased by 1.13% and 1.43%, respectively. Furthermore, emulsifying properties of SPI were strengthened with increased hemin. This work improves our understanding of interactions between SPI and hemin and offer a theoretical basis for application of heme in plant-based meat analogues.

High Internal Phase Emulsions Stabilized by Pea Protein Isolate Modified by Ultrasound Combined with pH-Shifting: Micromorphology, Rheology, and Physical Stability

In this study, the interfacial behavior of high internal phase emulsions (HIPEs), stabilized by ultrasound combined with pH-shifting modified pea protein isolate (MPPI), was investigated, and its emulsification process and stabilization mechanism were discussed. The effects of MPPI concentration on the micromorphology, droplet size, rheology, and stability of HIPEs were investigated. As the MPPI concentration increased, the appearance of HIPEs gradually changed from a relatively fluid state to a plastic solid-like state with detailed texture. There occurred a gradual decrease in droplet size, the cohering of an orderly and tight arrangement, in addition to the formation of a bilayer elastic interface layer. The macro- and microrheological assessments confirmed that the apparent viscosity, storage modulus, elasticity index, and macroscopic viscosity index increased gradually. Furthermore, it was demonstrated that 5 wt% MPPI-stabilized HIPEs had the potential to be used as 3D printing inks. Stability evaluation showed that the TURBISCAN stability index decreased and centrifugal stability increased. The appearance and microstructure remained highly stable after heating at 80 °C for 30 min and storage at 4 ℃ for 90 days. These findings confirm that MPPI improves the rheological behavior and stability of HIPEs by modulating the interfacial adsorption and network structure.

Homogenized soybean hull suspension as an emulsifier for oil/water emulsions: Synergistic effect of the insoluble fiber and soluble polysaccharide

In this study, the functional properties of the soybean hull soluble fractions and insoluble fiber in stabilizing oil-in-water emulsions were investigated by changing the soluble fraction (SF) content in the soybean hull suspensions. High-pressure homogenization (HPH) caused the release of soluble materials (Polysaccharides and proteins) and the deagglomeration of insoluble fibers (IF) from soybean hulls. The apparent viscosity of the soybean hull fiber suspension increased as the SF content of the suspension increased; The absolute value of ζ-potential increased from 18 to 28 mV. In addition, the IF individually stabilized emulsion had the largest emulsion particle size (32.10 μm), but decreased as the SF content in the suspension increased to 10.53 μm. The microstructure of the emulsions showed that surface-active SF adsorbed at the oil-water interface formed an interfacial film, and microfibrils in IF formed a three-dimensional network in the aqueous phase, which synergistically stabilized the oil-in-water emulsion. The findings of this study are important for understanding emulsion systems stabilized by agricultural by-products.

The Effects of Pectin Structure on Emulsifying, Rheological, and In Vitro Digestion Properties of Emulsion

Pectin, a complex hydrocolloid, attracts extensive attention and application stemming from its good emulsification. However, the source of emulsification remains a conundrum. In this experiment, the structures of six kinds of commercial pectin, including LM 101 AS (101), LM 104 AS (104), 121 SLOW SET (121), YM 150 H (150), LM 13 CG (13CG), and β-PECTIN (β-P) were determined, and the effects of pectin structure on emulsion emulsification, rheology and in vitro digestibility were studied. The results showed that the β-P pectin contained a higher content of protein, ferulic acid, and acetyl and had a lower interfacial tension; this pectin-stabilized emulsion exhibited a smaller droplet size and superior centrifugal and storage stability. The results showed that β-P pectin had higher contents of protein, ferulic acid, and acetyl and lower interfacial tension than other pectins, and its stabilized emulsion exhibited smaller droplet size and superior centrifugation and storage stability. Furthermore, the emulsion formed by the pectin with high molecular weight and degree of methoxylation (DM) had a higher viscosity, which can inhibit the aggregation of emulsion droplets to some extent. However, the DM of pectin affected the charge and digestion behavior of pectin emulsion to a great extent. The smaller the DM, the more negative charge the emulsion carried, and the higher the release rate of free fatty acids. The results provided a basis for the rational selection and structural design of the pectin emulsifier.