Effect of spatial distribution of tastants on taste intensity, fluctuation of taste intensity and consumer preference of (semi-)solid food products

Salt reduction in myofibrillar protein gel via inhomogeneous distribution of sodium-containing encapsulated fish oil coacervate: Mucopenetration ability of sodium carboxymethyl cellulose

The potential application of fish oil microcapsules as salt reduction strategies in low-salt myofibrillar protein (MP) gel was investigated by employing soy protein isolates/carboxymethyl cellulose sodium (SPI-CMC) coacervates enriched with 25 mM sodium chloride and exploring their rheological characteristics, taste perception, and microstructure. The results revealed that the SPI-CMC coacervate phase exhibited the highest sodium content under 25 mM sodium level, albeit with uneven distribution. Notably, the hydrophilic and adhesive properties of CMC to sodium facilitated the in vitro release of sodium during oral digestion, as evidenced by the excellent wettability and mucopenetration ability of CMC. Remarkably, the fish oil microcapsules incorporating SPI-CMC as the wall material, prepared at pH 3.5 with a core-to-wall ratio of 1:1, demonstrated the highest encapsulation efficiency, which was supported by the strong hydrogen bonding. Interestingly, the presence of SPI-CMC coacervates and fish oil microcapsules enhanced the interaction between MPs and strengthened the low-salt MP gel network. Coupled with electronic tongue analysis, the incorporation of fish oil microcapsules slightly exacerbated the non-uniformity of sodium distribution. This ultimately contributed to an enhanced perception of saltiness, richness, and aftertaste in low-salt protein gels. Overall, the incorporation of fish oil microcapsules emerged as an effective salt reduction strategy in low-salt MP gel.

A novel strategy for simultaneous reduction of salt and animal fat in burger using a taste contrast system based on double emulsion

The work investigated a taste contrast strategy to reduce the salt content in burgers by a novel design of water in gelled oil in water double emulsion (DE) as an animal fat replacer. Oleogelation reduced the particle size and improved emulsion viscosity, resulting in more emulsion stability than conventional DE. Moreover, oil gelation enhanced the encapsulation efficiency of salt. The partial substitution of the optimized DE incorporating salt within the W1 and cinnamaldehyde within the oil phase with animal fat in the burger successfully reduced salt content by up to 25% while maintaining the desired level of saltiness. The presence of cinnamaldehyde also increased oxidative stability and decreased color changes during storage. The replacement of DE and oleogel in burgers diminished cooking loss, while negatively affected the textural properties. Therefore, further optimization of this strategy could lead to healthier food formulations with reduced fat and salt content.

Layered food designs to create appetizing desserts: A proof-of-concept study

Creating layers in foods is a culinary technique commonly used to diversify sensory experiences, but it has not been reported scientifically on its effect on hedonic and appetitive responses. This study aimed to investigate the use of dynamic sensory contrasts in layered foods to stimulate liking and appetite, using lemon mousse as a model. A sensory panel evaluated the perceived sour taste intensity of lemon mousses acidified by various amounts of citric acid. Bilayer lemon mousses with unequal distribution of citric acid across the layers to deliver higher levels of intraoral sensory contrast were developed and evaluated. A consumer panel evaluated the liking and desire to eat lemon mousses (n = 66), and a selection of samples was further investigated in an ad libitum food intake setting (n = 30). In the consumer study, bilayer lemon mousses with a layer of low acidity (0.35% citric acid w/w) on top and higher acidity (1.58 or 2.8% citric acid w/w) at the bottom showed consistently higher liking and desire scores than their corresponding counterparts with identical acid levels equally distributed in a monolayer. In the ad libitum setting, the bilayer mousse (top: 0.35; bottom: 1.58% citric acid w/w) had a significant 13% increase in intake compared to its monolayer counterpart. Modulating sensory properties across food layers with different configurations and layer compositions can be further explored as a tool to design appetizing foods for consumers at risk of undernutrition.

Can nonvolatile tastants be smelled during food oral processing?

While accumulating evidence implied the involvement of retro-nasal sensation in the consumption of nonvolatile taste compounds, it is still unclear whether it was caused by the taste compounds themselves, and if so, how can they migrate from the oral to nasal cavity. At first, we proposed aerosol particles as an alternative oral-nasal mass transfer mechanism. The high-speed camera approved that aerosol particles could be generated by the typical oral and pharynx actions during food oral processing; while the narrow-band imaging of nasal cleft and mass spectrometry of nostril-exhaled air approved the migration of aerosol within the oral-nasal route. Then, the "smelling" of taste compounds within the aerosol particles was testified. The four-alternative forced choices (4AFC) approved that the potential volatile residues or contaminants within the headspace air of pure taste solution cannot arouse significant smell, while the taste compounds embedded in the in vitro prepared aerosol particles can be "smelled" via the ortho route. The "smell" of sucrose is very different from its taste and the "smell" of quinine, implying its actual olfaction. The sweetness intensity of sucrose solution was also reduced when the volunteers' noses were clipped, indicating the involvement of retro-nasal sensation during its drinking. At last, the efficiency of aerosol as a mechanism of oral-nasal mass transfer was demonstrated to be comparable with the volatile molecules under the experimental condition, giving it the potential to be a substantial and unique source of retro-nasal sensation during food oral processing.

The impacts of salt reduction strategies on technological characteristics of wheat bread: a review

Increased consumption of sodium is considered as the leading cause of cardiovascular disease and hypertension. Processed foods like bakery products are considered as the main source of sodium intake. Regarding the high consumption ratio of wheat bread, it is counted as the main contributor of sodium intake by the European food Safety Authorization and World Health Organization. Consequently, its salt reduction is considerably important to postpone adverse effects induced by sodium. Salt is used in wheat bread as a technological and sensory improver. Different salt reduction strategies (e.g. sodium free mineral salts, hollow salts, uneven salt distribution, amino acids and plant based salt boosters) had been assessed to reduce the sodium content in wheat bread. Despite their potential efficiency to partially imitate the technological and sensorial characteristics of salt in wheat breads, challenges also existed which may restrict their consumption level. Considering the importance of wheat bread in our daily diet, its high sodium content and the critical role of salt in its technological characteristics this study is aimed to review the influence of different salt reduction strategies in wheat bread from technological perspective.

Current Perspectives on Food Oral Processing

Food oral processing (FOP) is a fast-emerging research area in the food science discipline. Since its first introduction about a decade ago, a large amount of literature has been published in this area, forming new frontiers and leading to new research opportunities. This review aims to summarize FOP research progress from current perspectives. Food texture, food flavor (aroma and taste), bolus swallowing, and eating behavior are covered in this review. The discussion of each topic is organized into three parts: a short background introduction, reflections on current research findings and achievements, and future directions and implications on food design. Physical, physiological, and psychological principles are the main concerns of discussion for each topic. The last part of the review shares views on the research challenges and outlooks of future FOP research. It is hoped that the review not only helps readers comprehend what has been achieved in the past decade but also, more importantly, identify where the knowledge gaps are and in which direction the FOP research will go.

Compendium of sodium reduction strategies in foods: A scoping review

In response to health concerns generated by increased sodium intake, many new approaches have been studied to reduce the sodium content in processed food. It has been suggested that reducing sodium in the food supply may be the most appropriate solution. The aim of this scoping review was to establish what sodium reduction strategies are effective in maintaining acceptable sensory qualities for various food industry applications. Studies that evaluate and report on the effectiveness of a sodium reduction strategy relevant to food and included outcomes detailing how the strategies were received by human subjects using sensory data are included, as well as book chapters, literature reviews, and patents focusing on sodium reduction strategies. Only those published in English and since 1970 were included. Literature was obtained through Scopus, PubMed, EBSCOhost, and ScienceDirect databases, whereas patents were obtained through US Patent Trademark Office, Google Patents, and PATENTSCOPE databases. Two-hundred and seventy-seven primary studies, 27 literature reviews, 10 book chapters, and 143 patents were selected for inclusion. Data extracted included details such as analytical methods, broad and specific treatment categories, significant outcomes, and limitations among other material. Sodium reduction methods were categorized as either salt removal, salt replacement, flavor modification, functional modification, or physical modification. Although salt removal and salt replacement were the majority of included studies, future research would benefit from combining methods from other categories while investigating the impact on sensory characteristics, technological aspects, and consumer perception of the strategy.

Temporal Sensory Perceptions of Sugar-Reduced 3D Printed Chocolates

Sugar-reduced chocolates with desirable sensory qualities and sweetness can be created using a 3D printer by layering chocolates with different sugar concentrations. This study aimed to evaluate the temporal sensory profile, perceived sweetness intensity, and acceptance of prototype sugar-reduced and non-sugar-reduced 3D printed chocolates. A consumer panel (n = 72) evaluated the sensory profiles of six-layered chocolates. Sensory profiles were determined by temporal dominance of sensations (TDS), overall sweetness by a five-point intensity scale, overall liking by the nine-point hedonic scale, and differences among chocolates over time were visualized by principal component analysis (PCA). Layering by 3D printing achieved a 19% reduction in sugar without changes in the perceived overall sweetness and overall liking. Layering order of high and low sugar chocolate influenced the perceived overall sweetness and temporal sensory profiles of 3D printed chocolates with different total sugar concentrations. The dominance of attributes associated with milk chocolate was observed to increase sweetness perception while the dominance of attributes associated with dark chocolate was observed to decrease overall sweetness perception. Three-dimensional food printing technology is progressing rapidly, and further sugar reduction could be achieved with refined research methods.

3D printing of a high protein yoghurt-based gel: Effect of protein enrichment and gelatine on physical and sensory properties

The potential application of 3D printing technology in creating protein-rich desserts with multisensory design was investigated. Yoghurt-gel inks were formulated by varying the concentration of gelatine and whey protein isolate (WPI). Assessment of rheological and textural properties prior to printing, showed that an increase of gelatine concentration from 7.5 to 12.5% w/w increased the yield stress, storage modulus, loss modulus, firmness, and resilience of yoghurt gels. Addition of 12% WPI reduced these effects; creating softer gels with reduced resilience. However, these gels showed stable shape after printing, especially in formulations with higher gelatine concentrations. The changes in textural properties caused by the extrusion process need to be considered when designing yoghurt gels, as a significant reduction in firmness and resilience and an increase in adhesiveness were observed after 3D printing. The more stable and well-shaped 3D printed yoghurt gels were obtained by the combined effect of WPI and gelatine which provided a good balance of appearance, taste, flavour, and mouthfeel attributes evaluated by a trained sensory panel. A consumer study performed with thirty healthy adults showed the potential to improve sensory acceptance through the creation of multisensory layered design.

Salt and Aroma Compound Distributions Influence Flavour Release and Temporal Perception While Eating Hot-Served Flans

To counteract the negative effect of salt overconsumption on health, strategies have been developed to reduce the salt content in food products. Among them, two promising strategies based on odour-induced saltiness enhancement and the heterogeneous distribution of flavour compounds were combined and assessed in four-layer cream-based snacks. To investigate the relationship between saltiness enhancement, temporal release and perception of flavour compounds in hot snacks with heterogeneous distribution of salt and aroma compounds, complementary techniques were used: nose space PTR-Tof-MS (Proton Transfer Reaction-Time of Flight–Mass Spectrometry) to assess the release of aroma compounds in vivo, and ATI (Alternate Time-Intensity) and TDS Temporal Dominance of Sensations) to evaluate perception as a function of time. The obtained results confirmed that the strategy of concentrating salt in the outer layer of a multilayer product was the optimal solution with respect to taste intensity. Heterogeneous salt distribution decreased aroma compound release and consequently aroma intensity but in different ways according to both salt and added aroma distribution in the food matrix. The salty taste enhancement could be due to the initial strong dominance of the salty sensation at the very beginning of the eating process. The involved mechanisms rely on a combination of physico-chemical and perceptual effects which are not clear yet.

Food Oral Processing-An Industry Perspective

We illustrate how scientific understanding of Food Oral Processing enables food product development with specific benefits for several target populations. in vivo, in vitro, and in silico approaches are discussed in the context of their ability to quantify oral processing from the molecular to the macroscopic scale. Based on this understanding, food structures with enhanced performance in terms of hedonic and nutritional properties as well as appropriateness for age and certain medical conditions can be developed. We also discuss current gaps and highlight development opportunities from an industry perspective.

Food Texture Design by 3D Printing: A Review

An important factor in consumers’ acceptability, beyond visual appearance and taste, is food texture. The elderly and people with dysphagia are more likely to present malnourishment due to visually and texturally unappealing food. Three-dimensional Printing is an additive manufacturing technology that can aid the food industry in developing novel and more complex food products and has the potential to produce tailored foods for specific needs. As a technology that builds food products layer by layer, 3D Printing can present a new methodology to design realistic food textures by the precise placement of texturing elements in the food, printing of multi-material products, and design of complex internal structures. This paper intends to review the existing work on 3D food printing and discuss the recent developments concerning food texture design. Advantages and limitations of 3D Printing in the food industry, the material-based printability and model-based texture, and the future trends in 3D Printing, including numerical simulations, incorporation of cooking technology to the printing, and 4D modifications are discussed. Key challenges for the mainstream adoption of 3D Printing are also elaborated on.

Modifying sensory perception of chocolate coated rice waffles through bite-to-bite contrast: an application case study using 3D inkjet printing

Consumers expect perceptual constancy between multiple bites of the same food. In this study, we investigated how sweetness, creaminess, expected fullness and liking of chocolate coated rice waffles can be modified by bite-to-bite variation in chocolate thickness. 3D inkjet printing was used to accurately deposit the chocolate layers varying in thickness (0.8, 1.6 and 3.2 mm) onto rice waffles. In the first study, single bites of rice waffles with a homogeneous chocolate coating were evaluated. With increasing thickness of chocolate coating, the sweetness, creaminess, and expected fullness increased significantly. In the second study, we evaluated seven chocolate coated rice waffles containing a constant total chocolate amount but different chocolate thicknesses between three sequential bites. The order of chocolate thickness between bites had significant, but small effects on sweetness, expected fullness and liking. Interestingly, rice waffles with a homogeneous chocolate coating were preferred over rice waffles with an inhomogeneous chocolate coating. Neither recency nor primacy effects were sufficient to explain sweetness perception in this study. We conclude that the sweetness of chocolate coated rice waffles can be modified by bite-to-bite variation in chocolate thickness. This study demonstrates that 3D inkjet printing allows the production of foods with bite-to-bite contrast, which possibly might be used for healthier food product design.

Multivariate Statistical Analysis and Odor-Taste Network To Reveal Odor-Taste Associations

Odor-taste association has been successfully applied to enhance taste perception in foods with low sugar or low salt content. Nevertheless, selecting odor descriptors with a given associated taste remains a challenge. In the aim to look for odors able to enhance some specific taste, we tested different multivariate analyses to find links between taste descriptors and odor descriptors, starting from a set of data previously obtained using gas chromatography/olfactometry-associated taste: 68 odorant zones described with 41 odor descriptors and 4 taste-associated descriptors (sweetness, saltiness, bitterness, and sourness). A partial least square analysis allowed for identification of odors associated with a specific taste. For instance, odors described as either fruity, sweet, strawberry, candy, floral, or orange are associated with sweetness, while odors described as either toasted, potato, sulfur, or mushroom are associated with saltiness. A network representation allowed for visualization of the links between odor and taste descriptors. As an example, a positive association was found between butter odor and both saltiness and sweetness. Our approach provided a visualization tool of the links between odor and taste description and could be used to select odor-active molecules with a potential taste enhancement effect based on their odor descriptors.

Cross-modal interactions as a strategy to enhance salty taste and to maintain liking of low-salt food: a review

Salt reduction in foods is becoming an important challenge to protect population health from severe diseases as recommended by different health agencies worldwide. Among the reduction strategies already evaluated in order to lower sodium salt content in foods, the use of cross-modal interactions between taste and odour, regardless of saltiness, was revealed to be a very promising method to improve saltiness perception. Cross-modal odour-taste interactions, as means to enhance salty taste in foods, is reviewed. Salt-related odours can enhance salty taste in water solutions containing a low level of sodium chloride through odour-induced changes in taste perception. Odour-induced saltiness perception enhancement (OISE) depends on salt concentration (intensity). OISE was also found to be effective in low salt content solid model cheese but was texture- and composition-dependent. A significant enhancement in saltiness perception induced by Comté cheese and sardine odours was observed only in model foods with soft textures. In ternary odour-sour-salty solutions, sourness additively enhanced saltiness perception with salt-related odours. Finally, in cream-based food systems, a strategy combining OISE and heterogeneous distribution of stimuli was found to compensate for a greater than 35% decrease in salt content without significant loss of acceptability. However, variation in the composition of the food matrix influenced aroma and salt release and consequently the overall saltiness perception. A better knowledge of the mechanisms involved in cross-modal perceptual interactions at the central level should allow for the optimization of their use as salt reduction strategies for healthier food design.

Combined heterogeneous distribution of salt and aroma in food enhances salt perception

Combining salt and aroma heterogeneous distribution in hot snacks improves saltiness perception and helps to maintain consumer liking. This approach is relevant for lowering salt content in food.