Studies on tuber and root starches. I. Structure and physicochemical properties of innala (Solenostemon rotundifolius) starches grown in Sri Lanka

Process optimization of wheat flour crisp puffing by radio frequency and the accompanying property changes of starch

This research performed the process optimization of wheat flour crisp puffing by radio frequency (RF) and investigated the accompanying property changes of starch. Experiments were performed in a 6 kW, 27.12 MHz pilot-scale RF system. The results showed that the volume expansion was highest (220%) when the conditions were employed as follows: electrode gap (115 mm); height of the sample (55 mm); initial moisture content of the sample (30%). Under these conditions, the samples were puffed at 120 s by RF, and changes in the starch properties were further observed. The results showed that the structure of the starch was destroyed, changing from oval and spherical in shape to fragmented. The crystal type of the starch changed from A to A + V types. Its crystal order was reduced, and the Fourier-infrared spectrum showed that the ratio of (1048/1022) cm-1 decreased from 1.142 to 1.047. The crystallinity decreased from 48.27% to 17.57%. These changes will help starch digestion and absorption in human body. These results indicated that RF puffing could become a potential development method for puffed snacks. PRACTICAL APPLICATION: In this study, the processes of radio frequency puffing wheat flour chips were optimized, and the changes of starch properties during puffing were studied. Therefore, this research provided a theoretical basis for the industrial application of radio frequency puffing.

Characterization of arrowroot (Maranta arundinacea) starch as a potential starch source for the food industry

Arrowroot is an underutilized tuber crop in Sri Lanka and the characterization of starch was done to identify its nutritional, physicochemical, and functional properties to evaluate its potential for use in the food industry. This study distinctly advances the field of arrowroot starch characterization by providing more characterization techniques for starch samples from Sri Lanka. Arrowroot starch colour was closely similar to colour of wheat flour indicating that the effect of colour is minimum when replacing wheat flour. Oval, spherical, and irregular globular shapes were the predominant starch granule shapes for arrowroot. The average length of starch granules was 44.99 ± 1.27 μm while the width of granules was 31.44 ± 0.58 μm. The least gelation concentration was 8.0% indicating its better gel-forming ability. The nutritional composition of arrowroot starch consisted of low crude protein (0.72 ± 0.02%), crude fat (0.26 ± 0.19%), and crude fiber (1.00 ± 0.09%) contents indicating the purity of starch. Sodium, Potassium, Calcium, Iron, and Zinc contents were 52.6 mg/kg, 4312.95 mg/kg, 382.67 mg/kg, 9.07 mg/kg, and 2.59 mg/kg, respectively. Results of flour densities demonstrated the potential of arrowroot starch to be used in the pharmaceutical industry. Arrowroot starch had high viscosity defining its potential as a thickener. The starch also had high swelling power and solubility indices while solubility was positively correlated with viscosity (0.679; P > 0.05). The low moisture absorbance indicates a longer shelf life of stored arrowroot starch. Onset temperature (To) of 75.02 °C, peak temperature (Tp) of 77.95 °C, and conclusion temperature (Tc) of 82.43 °C were resulted from DSC thermogram. Arrowroot was identified as an A-type starch from x-ray diffractometry and the FT-IR spectrum of arrowroot was identical to starch and presented the carbohydrate nature of starch. Thus, arrowroot starch has a high potential to be used in the food industry based on its functional properties.

Sorghum Flour Features Related to Dry Heat Treatment and Milling

Heat treatment of sorghum kernels has the potential to improve their nutritional properties. The goal of this study was to assess the impact of dry heat treatment at two temperatures (121 and 140 °C) and grain fractionation, on the chemical and functional properties of red sorghum flour with three different particle sizes (small, medium, and large), for process optimization. The results showed that the treatment temperature had a positive effect on the water absorption capacity, as well as the fat, ash, moisture and carbohydrate content, whereas the opposite tendency was obtained for oil absorption capacity, swelling power, emulsion activity and protein and fiber content. Sorghum flour particle size had a positive impact on water absorption capacity, emulsion activity and protein, carbohydrate and fiber content, while oil absorption capacity, swelling power and fat, ash and moisture content were adversely affected. The optimization process showed that at the treatment temperature at 133 °C, an increase in fat, ash, fiber and carbohydrate content was experienced in the optimal fraction dimension of red sorghum grains. Moreover, the antioxidant performance showed that this fraction produced the best reducing capability when water was used as an extraction solvent. Starch digestibility revealed a 22.81% rise in resistant starch, while the thermal properties showed that gelatinization enthalpy was 1.90 times higher compared to the control sample. These findings may be helpful for researchers and the food industry in developing various functional foods or gluten-free bakery products.

Study on structural characterization, physicochemical properties and digestive properties of euryale ferox resistant starch

At present, the raw materials for industrialized RS3 products are relatively simple and its purity is low. In addition, the correlation between structure and digestion characteristics of RS3 are rarely studied. In this study, euryale ferox, a kind of annual aquatic herb crop with high content of starch was used as a raw material to prepare RS3 by different methods, including autoclaving, enzymolysis-autoclaving and dual enzymolysis, respectively. The results showed that there were significant differences in the structure and physicochemical properties of the different euryale ferox resistant-enhanced and purified resistant starches (p < 0.05). Purified euryale ferox resistant starches belonged to B + V type crystal and had high thermal stability. After digestion, the structure and thermal properties of euryale ferox resistant-enhanced starches changed a lot. The digestion rate and estimated glycemic index (eGI) of the three kinds of purified euryale ferox RS3 were lower than 20% and 50%, respectively.

Effect of malting and fermentation on colour, thermal properties, functional groups and crystallinity level of flours from pearl millet (Pennisetum glaucum) and sorghum (Sorghum bicolor)

The effect of malting and fermentation on colour, thermal properties, level of crystallinity and functional groups of Agrigreen, Babala pearl millet cultivars and sorghum flours were studied using response surface methodology. The central composite rotatable design was performed on two independent variables in terms of malting and fermentation time at intervals of 24, 48 and 72 h, respectively using design expert software. One-way analysis of variance at p < 0.05, regression analysis, response surface plots for interactions between malting and fermentation processing times with response variables were recorded. The results indicated that malting and fermentation times have significant effects on the thermal and colour properties as well as the level of crystallinity and functional groups of pearl millet cultivars and sorghum flours. In terms of colour, sorghum exhibited high content in L∗ at 72.02-73.72, a∗ ranged from 2.50-3.30 and chrome at 13.10-14.82, while Babala flour was high in b∗ and hue at 12.15-14.27 and 73.00-84.80, respectively. In terms of thermal properties, sorghum was noticed to be high in melting peak at 87.57-104.83 °C, 102.66-111.14 °C for end completion and gelatinisation range at 10.70-25.79 °C, whereas, Babala recorded high values in onset and enthalpy at 93.20-100.11 and 5.72-21.62 J/g, respectively. The Fourier transform infrared (FTIR) spectroscopy showed that malted and fermented Agrigreen, Babala and sorghum flour showed peaks in OH, carbonyl, amide and C-O bonding. The optimal processing time for the colour of Agrigreen was 50.69 h (malting) and 39.38 h (fermentation), Babala was 54.40 h (malting) and 65.30 h (fermentation); and sorghum was 49.90 h (malting) and 54.61 h (fermentation). While the optimal malting and fermentation time for thermal properties for Agrigreen was 45.78 h and 42.60 h; Babala was 40.94 h and 29.07 h and sorghum was 34.83 h and 36.33 h, respectively with product quality at the desirability of 1.00. X-ray diffractogram results of the optimum processing points of the thermal properties showed that malted and fermented Agrigreen, Babala and sorghum flour showed high peak intensities, while the unprocessed flour exhibited diffused peaks. The obtained results would assist food processing companies to improve the colour and thermal properties and also the behaviour of the crystallinity and functional groups in food during processing.

Effect of drying treatment on the structural characterizations and physicochemical properties of starch from canistel (Lucuma nervosa A.DC)

This work investigated the effects of hot air drying pretreatment (HAD), freeze drying pretreatment (FD) and vacuum drying pretreatment (VD) on the physicochemical properties and structural characterizations of starch isolated from canistels. X-ray diffraction displayed that the starches separated from canistel by different drying pretreatments showed a typical A-type crystal structure. The SEM image showed that cracks and debris appeared on the surface of HVD and VD particles. The molecular structure of starches obtained by different drying pretreatments was studied using Fourier infrared and solid state ¹³C CP/MAS NMR analysis. The results indicated that vacuum drying pretreatment could promote the formation of the double helix of starch granules, and hot air drying and freeze drying destroyed the ordered structure of starch granules. These structural changed to affect the physicochemical properties of starch granules. The study of different drying pretreatments to separate starches provided practical value for drying pretreatments. Furthermore, the current study affords information for canistel starches cultivated in China that would be convenient for commercial applications.

Elucidating potential utilization of Portuguese common bean varieties in rice based processed foods

The present study was aimed at studying the physico-chemical and functional properties of 31 Portuguese common bean varieties. In addition, the whole bean flours (WBF) and starch isolates (SI) of three representative bean varieties and their rice: bean blends (70:30; 50:50) were assessed for amylose content, thermal and pasting properties in view of supplementation in rice based processed foods. Bean varieties showed significant differences in protein content (20.78-27.10%), fat content (1.16-2.18%), hydration capacity (95.90-149.30%), unhydrated seeds (4.00-40.00%), γ tocopherol (3.20-98.05 mg/100 g fat), δ tocopherol (0.06-4.72 mg/100 g fat) and pasting behavior. Amylose content of WBF (11.4-20.2%) was significantly lower than rice flour (23.51%) whereas SI of beans (40.00-47.26%) had significantly higher amylose content than SI of rice (28.13%). DSC results showed that WBF (11.4-20.2 °C) had significantly broader and lower gelatinization temperature range (∆Tr) than corresponding SI (20.9-23.1 °C). WBF had significantly lower pasting viscosity due to low starch content and compositional matrix effect as compared to SI. Setback viscosities of WBF and rice: bean blends was lower than rice flour. Low setback viscosities of rice:bean blends may be used to prevent syneresis and stabilizing the quality of frozen foods in rice based processed foods.

Impact of hydrothermal modifications on the physicochemical, morphology, crystallinity, pasting and thermal properties of acorn starch

Native acorn starch had high purity and the granules were mainly elliptical and spherical with the mean diameter of 7.32 μm. Hydrothermal modifications slightly changed the morphology. The solubility, swelling properties and amylose leaching of acorn starch were mostly influenced by Heat-moisture treatment (HMT). XRD pattern of native starch (C-type) did not change on hydrothermal modifications, but native and annealing (ANN) modified starches showed the most crystallinity. DSC results showed that the gelatinization temperatures and enthalpy of native starch were 59.9, 71.3, and 80.6 °C and -14.9 mJ/mg, respectively, and hydrothermal treatments generally increased the gelatinization temperatures. Regarding to RVA results, peak, breakdown, trough, setback, and final viscosities of native starch were 415, 143, 272, 168, and 440 RVU, respectively, and viscosity parameters of native starch were mainly more than those of hydrothermally modified starches. Generally, the intensity of the effects of hydrothermal modifications followed the order: HMT > dual modifications > ANN.

Use of hydrocolloids as cryoprotectant for frozen foods

Freezing is one of the widely used preservation methods to preserve the quality of food products but it also results in deteriorative changes in textural properties of food which in turn affects its marketability. Different foodstuffs undergo different types of changes in texture, taste and overall acceptability upon freezing and subsequent frozen storage. Freezing and thawing of pre-cut or whole fruits and vegetables causes many deleterious effects including texture and drip losses. The major problem in stability of ice-cream is re-crystallization phenomena which happens due to temperature fluctuations during storage and finally impairs the quality of ice-cream. Frozen storage for longer periods causes rubbery texture in meat and fish products. To overcome these problems, hydrocolloids which are polysaccharides of high molecular weight, are used in numerous food applications involving gelling, thickening, stabilizing, emulsifying etc. They could improve the rheological and textural characteristics of food systems by changing the viscosity. They play a major role in retaining texture of fruits and vegetables after freezing. They provide thermodynamic stability to ice cream to control the process of re-crystallization. Hydrocolloids find application in frozen surimi, minced fish, and meat products due to their water-binding ability. They are also added to frozen bakery products to improve shelf-stability by retaining sufficient moisture and retarding staling. Various hydrocolloids impart different cryoprotective effects to food products depending upon their solubility, water-holding capacity, rheological properties, and synergistic effect with other ingredients during freezing and frozen storage.

Starch Characteristics Linked to Gluten-Free Products

The increasing prevalence of coeliac disease (CD) and gluten-related disorders has led to increasing consumer demand for gluten-free products with quality characteristics similar to wheat bread. The replacement of gluten in cereal-based products remains a challenge for scientists, due to its unique role in network formation, which entraps air bubbles. When gluten is removed from a flour, starch is the main component left. Starch is used as gelling, thickening, adhesion, moisture-retention, stabilizing, film forming, texturizing and anti-staling ingredient. The extent of these properties varies depending on the starch source. The starches can additionally be modified increasing or decreasing certain properties of the starch, depending on the application. Starch plays an important role in the formulation of bakery products and has an even more important role in gluten-free products. In gluten-free products, starch is incorporated into the food formulation to improve baking characteristics such as the specific volume, colour and crumb structure and texture. This review covers a number of topics relating to starch; including; an overview of common and lesser researched starches; chemical composition; morphology; digestibility; functionality and methods of modification. The emphasis of this review is on starch and its properties with respect to the quality of gluten-free products.

Physico-chemical properties of acetylated starches from Indian black gram (Phaseolus mungo L.) cultivars

Starches separated from three black gram cultivars were modified by acetylation and compared to their native starches. Acetylation was carried out by treating starches with 0.04 and 0.08 g of acetic anhydride/g of starch dry weight basis (db) at 25 °C. The extent of acetylation increased proportionally with the concentration of acetic anhydride used. Retrogradation of acetylated starch pastes decreased significantly (p ≤ 0.05) as revealed by significant decrease in syneresis, increased freeze thaw stability and increased light transmittance. The pasting curves of 10.7 % starch slurries showed that acetylation decreased the setback viscosity values by 51.2-82.8 % and pasting temperature by 3.1-5.6 °C than respective native starches. Differential scanning calorimetry observations also revealed significant decrease in gelatinisation temperature of acetylated starches than native starches. Hardness and adhesiveness of starch gels varied between 10.3 and 32.6 g and 4.6-82.3gs, respectively which were significantly lower than corresponding native starch gels.

Physicochemical properties and in vitro digestibility of flour and starch from pea (Pisum sativum L.) cultivars

Flours and isolated starches from three different cultivars (1544-8, 1658-11 and 1760-8) of pea grown under identical environmental conditions were evaluated for their physicochemical properties and in vitro digestibility. The protein content, total starch content and apparent amylose content of pea flour ranged from 24.4 to 26.3%, 48.8 to 50.2%, and 13.9 to 16.7%, respectively. In pea starches, the 1760-8 showed higher apparent amylose content and total starch content than the other cultivars. Pea starch granules were irregularly shaped, ranging from oval to round with a smooth surface. All pea starches showed C-type X-ray diffraction pattern with relative crystallinity ranging between 23.7 and 24.7%. Pea starch had only a single endothermic transition (12.1-14.2 J/g) in the DSC thermogram, whereas pea flour showed two separate endothermic transitions corresponding to starch gelatinization (4.54-4.71 J/g) and disruption of the amylose-lipid complex (0.36-0.78 J/g). In pea cultivars, the 1760-8 had significantly higher setback and final viscosity than the other cultivars in both pea flour (672 and 1170cP, respectively) and isolated starch (2901 and 4811cP). The average branch chain length of pea starches ranged from 20.1 to 20.3. The 1760-8 displayed a larger proportion of short branch chains, DP (degree of polymerization) 6-12 (21.1%), and a smaller proportion of long branch chains, DP≥37 (8.4%). The RDS, SDS and RS contents of pea flour ranged from 23.7 to 24.1%, 11.3 to 12.8%, and 13.2 to 14.8%, respectively. In pea starches, the 1760-8 showed a lower RDS content but higher SDS and RS contents. The expected glycemic index (eGI), based on the hydrolysis index, ranged from 36.9 to 37.7 and 69.8 to 70.7 for pea flour and isolated pea starch, respectively.

Isolation and physicochemical characterisation of starch from cocoyam (Colocasia esculenta) grown in Malawi

BACKGROUND

The aim of this study was to determine the physicochemical properties of starches isolated from Malawian cocoyams and compare them with those of cassava and corn starches.

RESULTS

The purity of the isolated starches varied from 851 to 947 g kg(-1) and pH from 4.93 to 6.95. Moisture, ash, protein, fat and amylose contents ranged from 104 to 132, 0.3 to 1.5, 3.5 to 8.4, 0.9 to 1.6, and 111 to 237 g kg(-1), respectively. Cocoyam starches gave higher potassium and phosphorus but lower calcium levels than the other starches. The shape of starch granules varied from spherical to polygonal with cocoyam starches displaying smaller-sized granules than cassava and corn starches. Cocoyam starches gave a higher wavelength of maximum iodine absorption and blue value but lower reducing capacity values than cassava and corn starches. The extent of acid hydrolysis of the starches also differed. Cocoyam starches exhibited amylopectin molecules of higher molecular weights but amylose molecules of lower molecular weights than cassava and corn starches. Cocoyam starches exhibited lower water absorption capacity and swelling power, paste clarity and viscosity but higher solubility, gelatinisation temperatures and retrogradation tendencies than cassava and corn starches.

CONCLUSIONS

The physicochemical properties of native Malawian cocoyam starches vary among the different accessions and differ from those of cassava and corn starches.