Improving thermal stability of hydrolysed whey protein-based infant formula emulsions by protein–carbohydrate conjugation

Investigating the thermal stability and calcium resistance of O/W emulsions prepared with glycosylated whey protein hydrolysates modified by different saccharides

The poor thermal stability and ion tolerance of whey protein hydrolysates (WPH) restrict its application in emulsions, while glycosylation shows potential benefits in improving WPH stability. However, the relationship between saccharides with different Mw and the glycosylation behavior of WPH rich in short peptides is unclear. In response, the effect of different saccharides on glycosylated WPH rich in short peptides and its emulsion stability were investigated. Grafted small Mw saccharides were more beneficial to the emulsion stability of WPH. Specifically, grafting xylose effectively inhibited 121 °C sterilization and 5 mM CaCl2-induced coalescence of WPH emulsion (687.50 nm) by comprehensively enhancing steric hindrance, conformational flexibility and electrostatic repulsion, and dissociating large aggregates into small aggregates. Conversely, grafting maltodextrin (30,590 Da) reduced thermal stability of WPH emulsion (4791.80 nm) by steric shielding and bridging flocculation. These findings provide new sights into glycosylation mechanism for WPH and achieving its application in nutritional emulsions.

Whey protein hydrolysates and infant formulas: Effects on physicochemical and biological properties

Whey protein hydrolysates are recognized for their substantial functional and biological properties. Their high digestibility and amino acid composition make them a valuable ingredient to hydrolyzed whey infant formulas, enhancing both product functionality and nutritional values for infant growth. It is important to understand the functional and biological properties of whey protein hydrolysates for their applications in infant formula systems. This review explored preparation methods of whey protein hydrolysates for infant formula-based applications. The effects of whey protein hydrolysate on the physicochemical and biological properties of hydrolyzed whey infant formulas were summarized. The influences of whey protein hydrolysates on the functional and nutritional properties of formulas from manufacturing to infant consumption were discussed. Whey protein hydrolysates are crucial components in the preparation of infant formula, tailored to meet the functional and nutritional demands of the product. The selection of enzyme types and hydrolysis parameters is decisive for obtaining "optimal" whey protein hydrolysates that match the intended characteristics. "Optimal" whey protein hydrolysates offer diverse functionalities, including solubility, emulsification and production stability to hydrolyzed whey infant formulas during manufacturing processes and formulations. They simultaneously promote protein digestibility, infant growth and other potential health benefits, including reduced allergenic potential, as supported by in vitro, in vivo and clinical trials. Overall, the precise selection of enzymes and hydrolysis parameters in the production of whey protein hydrolysates is crucial in achieving the desired characteristics and functional benefits for hydrolyzed whey infant formulas, making them critical in the development of infant nutrition products.

From lab-based to in-line: Analytical tools for the characterization of whey protein denaturation and aggregation-A review

Whey protein denaturation and aggregation have long been areas of research interest to the dairy industry, having significant implications for process performance and final product functionality and quality. As such, a significant number of analytical techniques have been developed or adapted to assess and characterize levels of whey protein denaturation and aggregation, to either maximize processing efficiency or create products with enhanced functionality (both technological and biological). This review aims to collate and critique these approaches based on their analytical principles and outline their application for the assessment of denaturation and aggregation. This review also provides insights into recent developments in process analytical technologies relating to whey protein denaturation and aggregation, whereby some of the analytical methods have been adapted to enable measurements in-line. Developments in this area will enable more live, in-process data to be generated, which will subsequently allow more adaptive processing, enabling improved product quality and processing efficiency. Along with the applicability of these techniques for the assessment of whey protein denaturation and aggregation, limitations are also presented to help assess the suitability of each analytical technique for specific areas of interest.

In Vitro Digestibility Assessment of Whey from Goat and Camel Milk Fermented with Lactobacillus helveticus for Use as a Base in Formulating Follow-On Formula

Follow-on formulas are necessary for newborns that are unable to breastfeed. Thus, the development of formulas more tailored to infants' needs is highly important. Recently, using camel milk, goat milk, and sweet milk whey in the formulation of follow-on formulas has gained researchers' attention. Moreover, developing postbiotic systems to create formulas that mimic human milk, are easy to digest, improve compatibility with an infant's gut, and boost immunity is crucial. Thus, this study aimed to create and assess different formulations using fermented whey from camel and goat milks. The fermentation process involved the use of Lactobacillus helveticus as a probiotic and proteolytic lactic acid bacterium strain. The study monitored the proteolytic activity and antioxidant properties of sweet whey produced from cow, camel, and goat milks during the fermentation process with L. helveticus. Also, three different milk fat blends were recombined using edible vegetable oils (coconut oil, rice bran oil, and canola oil) and then they were used to formulate follow-on formulas with a similar fat composition to human milk. Finally, the prepared formulas were tested for their in vitro digestibility and antioxidant activity before and after digestion. The L. helveticus strain had high proteolytic activity towards whey proteins from all the types of milk used in the study. A fermentation time of 6 h produced a higher proteolytic degree and antioxidant activity than 2 and 4 h of fermentation. No significant differences were observed for proteolytic degree and antioxidant activity between 6 and 12 h of fermentation for the cow, camel, and goat whey samples. Regarding the fat blends, animal milk fat, rice bran oil, and canola oil in a fat combination were essential to provide the required amount of unsaturated fatty acids in the follow-on formulas, especially the linoleic acid-α-linolenic acid (LA:ALA) ratio. Adding coconut oil in small amounts to the follow-on formulas provided the required amounts of saturated fatty acids, especially lauric and meristic acids. The follow-on formula based on cow or goat milk whey fermented with L. helveticus released more free amino acids (mmol tyrosine equivalent mL-1) with high levels of antioxidants compared to unfermented ones. The release of free amino acids in the follow-on formula based on camel milk whey was not affected by fermentation. Our results recommend using L. helveticus in the fermentation of follow-on formulas based on camel and goat whey instead of formulas based on cow milk proteins.

Stability of milk proteins subjected to UHT treatments: challenges and future perspectives

Ultra-high temperature (UHT) treatments are of high economic relevance for food industries because they contribute to extending the shelf life of food products and facilitating their distribution. In the dairy segment, UHT treatments are applied to a wide range of products containing variable protein amounts. In this sense, the changes in the molecular structure of milk proteins induced by the severity of UHT treatments may lead to fouling in equipment during processing or sedimentation and/or gelation during storage. Nowadays, these concerns are even more relevant due to the increasing demand for UHT-treated high-protein beverages. This review will discuss the two main strategies used by industries to increase the stability of milk proteins during and/or after UHT treatments: (i) addition of chelating agents and (ii) use of polysaccharides. Moreover, the challenges and opportunities associated with promising strategies to improve the stability of milk proteins during and/or after UHT treatments will be covered in this review. The information compiled will be useful to guide researchers and industries in developing more stable UHT dairy products in harmony with consumers' demands.

Behavior of protein-polysaccharide conjugate-stabilized food emulsions under various destabilization conditions

The sensitivity of protein-stabilized emulsions to flocculation, coalescence, and phase separation under destabilization conditions (i.e., heating, aging, pH, ionic strength, and freeze-thawing) may limit the widespread use of proteins as effective emulsifiers. Therefore, there is a great interest in modulating and improving the technological functionality of food proteins by conjugating them with polysaccharides, through the Maillard reaction. The present review article highlights the current approaches of protein-polysaccharide conjugate formation, their interfacial properties, and the behavior of protein-polysaccharide conjugate stabilized emulsions under various destabilization conditions, including long-term storage, heating and freeze-thawing treatments, acidic conditions, high ionic strength, and oxidation. Protein-polysaccharide conjugates are capable of forming a thick and cohesive macromolecular layer around oil droplets in food emulsions and stabilizing them against flocculation and coalescence under unfavorable conditions, through steric and electrostatic repulsion. The protein-polysaccharide conjugates could be therefore industrially used to design emulsion-based functional foods with high physicochemical stability.

Effects of casein phosphopeptides on thermal stability and sensory quality of whey protein emulsions containing calcium beta-hydroxy-beta-methylbutyrate

This study aimed to elucidate the effect of casein phosphopeptides (CPP) on the thermal stability and sensory quality of whey protein emulsions containing calcium beta-hydroxy-beta-methylbutyrate (WPEs-HMB-Ca). The interaction mechanism among CPP, HMBCa, and WP in the emulsions before and after autoclaving (121 °C, 15 min) was systematically investigated from macroscopic external and microscopic molecular perspectives. It was found that WPEs-HMB-Ca treated by autoclaving resulted in an increase in droplet size (d_4,3 = 24.09 μm) due to aggregation/flocculation of proteins, along with a stronger odor with higher viscosity, compared to those without autoclaving. When CPP:HMB-Ca = 1:25 (w/w) in the emulsion, the droplets exhibited a more uniform and consistent state in the emulsion. In addition, CPP was able to inhibit the formation of complex spatial network structures of proteins during autoclaving by binding with Ca²⁺, thus improving the thermal stability and storage stability of WPEs-HMB-Ca. This work might provide theoretical guidance for developing functional milk drinks with good thermal stability and flavor.

Formulation and Physical Stability of High Total Solids Lentil Protein-Stabilised Emulsions for Use in Plant Protein-Based Young Child Formulae

The demand for high-quality plant protein products is increasing and the aim of this work was to evaluate the impact of increasing the total solids content on the formation and stability of lentil protein stabilised oil-in-water emulsions. A series of emulsions were formulated using different proportions of total solids: 23, 26, 29, 32, and 35% (w/v). The emulsions were formulated using three ingredients-lentil protein, sunflower oil, and maltodextrin-which made up 15.85, 27.43, and 56.72% (w/w) of the total solids, respectively. The changes in apparent viscosity, particle size distribution, and colour during thermal processing were evaluated, with the physical stability investigated using an analytical centrifuge. The apparent viscosity of the solutions increased with total solids content (25.6 to 130 mPa.s^-1), as did redness colour intensity (a* value increased from 5.82 ± 0.12 to 7.70 ± 0.09). Thermal processing resulted in greater destabilisation for higher total solids samples, as evidenced by greater changes in particle size, along with decreased redness colour. These results bring a better understanding of high total solids plant protein emulsions and factors affecting their stability, which could be used for the development of cost-effective and sustainable processing solutions in the production of plant protein young child formulae.

Formulation, pilot-scale preparation, physicochemical characterization and digestibility of a lentil protein-based model infant formula powder

BACKGROUND

Infant formula is a human milk substitute for consumption during the first months of life. The protein component of such products is generally of dairy origin. Alternative sources of protein, such as those of plant origin, are of interest due to dairy allergies, intolerances, and ethical and environmental considerations. Lentils have high levels of protein (20-30%) with a good amino acid profile and functional properties. In this study, a model lentil protein-based formula (LF), in powder format, was produced and compared to two commercial plant-based infant formulae (i.e., soy; SF and rice; RF) in terms of physicochemical properties and digestibility.

RESULTS

The macronutrient composition was similar between all the samples; however, RF and SF had larger volume-weighted mean particle diameters (D[4,3] of 121-134 μm) than LF (31.9 μm), which was confirmed using scanning electron and confocal laser microscopy. The larger particle sizes of the commercial powders were attributed to their agglomeration during the drying process. Regarding functional properties, the LF showed higher D[4,3] values (17.8 μm) after 18 h reconstitution in water, compared with the SF and RF (5.82 and 4.55 μm, respectively), which could be partially attributed to hydrophobic protein-protein interactions. Regarding viscosity at 95 °C and physical stability, LF was more stable than RF. The digestibility analysis showed LF to have similar values (P < 0.05) to the standard SF.

CONCLUSION

These results demonstrated that, from the nutritional and physicochemical perspectives, lentil proteins represent a good alternative to other sources of plant proteins (e.g., soy and rice) in infant nutritional products. © 2021 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Structural characteristics and emulsifying properties of myofibrillar protein-dextran conjugates induced by ultrasound Maillard reaction

In this study, we investigated the effect of the ultrasound-assisted Maillard reaction on the structural and emulsifying properties of myofibrillar protein (MP) and dextran (DX) conjugates with different molecular weights (40, 70 and 150 kDa). Compared with classical heating, mild and moderate ultrasound-assisted methods (100-200 W) could accelerate the later stage of the Maillard reaction, which increased the degree of graft (DG) and the content of advanced Maillard reaction products (MPRs). Structural analysis revealed conjugates obtained by Maillard reaction induced the loss of ordered secondary structures (α-helix, β-sheets) and red-shift of maximum emission wavelength of intrinsic fluorescence spectrum. The conjugate containing 40 kDa DX exhibited higher extent of Maillard reaction compared to those containing 70 kDa and 150 kDa DX under various treating methods. Moreover, the ultrasound-assisted Maillard reaction could effectively improve the emulsifying behaviors. 100 W ultrasound-induced conjugates grafted by 70 kDa DX produced the smallest emulsion size with optimum storage stability. Confocal laser scanning microscopy and analytical centrifugal analyzer further confirmed MP grafted by 70 kDa DX with the assistance of 100 W ultrasound field could produce the smallest and most homogeneous MP-base emulsion with no flocculation. Our study demonstrated that mild ultrasound treatment resulted in well-controlled Maillard reaction, and the related glycoconjugate grafted with 70 kDa DX showed the greatest improvements in emulsifying ability and stability. These findings provided a theoretical foundation for the development of emulsion-based foods with excellent characteristics.

Effects of whey protein hydrolysate on growth promotion and immunomodulation in mouse pups in artificial rearing system

This study aimed to investigate the effects of whey protein hydrolysate (WPH) on the growth and immunity of mouse pups in artificial rearing (AR) system. Mouse pups were reared in the AR system with artificial milk including 5% WPH (AR with WPH) or not (AR without WPH), and the remaining pups were reared by their mother (dam) for 14 days after birth. The body weight change and body weight gain rates in the AR with WPH group were significantly higher than those observed in the AR without WPH group and similar to those in the dam group. Moreover the feed and protein efficiencies in the AR with WPH group were significantly higher than those of the AR without WPH group. In addition, the supplement of WPH in the AR system was shown to significantly elevate the number of CD3⁺ CD8⁺ , B220⁺ CD19⁺ , IA/IE⁺ CD11c⁺ , and CD11b⁺ in the thymocyte and/or splenocyte, and the thymus weight. Furthermore, MALDI-TOF/MS analysis identified the amino acid sequences corresponding to some peptides, and indicated that VRTPEVDDE had the highest relative intensity among the peptides from tested WPH. Therefore, WPH would be required to not only promote growth, but also exert immunomodulatory activities in mouse pups in AR system.

Inter-relationship between lactose crystallization and surface free fat during storage of infant formula

Inter-relationship between lactose crystallization (LC), the amount and composition of surface free fat (SFF); and their effect on physico-chemical properties of infant formula (IF) containing hydrolyzed and intact (non-hydrolyzed) whey protein in their composition were investigated at two temperatures (25 and 45 °C) and five RH (11-65%) conditions. Results varied with compositional variation of IF. LC increased exponentially with SFF in non-hydrolyzed IF powders. IF composition influenced LC and caused selective migration of triglycerides, resulting in higher proportion of unsaturated fats in SFF of powders with large lactose crystals and vice-versa. Increase in SFF with increased proportion of saturated fats in their composition, resulted in reduced wettability of powders. Overall, IF composition affects LC which influences the amount and type of fat migration to particle surface resulting in varying wettability of IF powders.

Thermal and Mineral Sensitivity of Oil-in-Water Emulsions Stabilised using Lentil Proteins

Oil-in-water emulsion systems formulated with plant proteins are of increasing interest to food researchers and industry due to benefits associated with cost-effectiveness, sustainability and animal well-being. The aim of this study was to understand how the stability of complex model emulsions formulated using lentil proteins are influenced by calcium fortification (0 to 10 mM CaCl2) and thermal processing (95 or 140 °C). A valve homogeniser, operating at first and second stage pressures of 15 and 3 MPa, was used to prepare emulsions. On heating at 140 °C, the heat coagulation time (pH 6.8) for the emulsions was successively reduced from 4.80 to 0.40 min with increasing CaCl2 concentration from 0 to 10 mM, respectively. Correspondingly, the sample with the highest CaCl2 addition level developed the highest viscosity during heating (95 °C × 30 s), reaching a final value of 163 mPa·s. This was attributed to calcium-mediated interactions of lentil proteins, as confirmed by the increase in the mean particle diameter (D[4,3]) to 36.5 µm for the sample with 6 mM CaCl2, compared to the unheated and heated control with D[4,3] values of 0.75 and 0.68 µm, respectively. This study demonstrated that the combination of calcium and heat promoted the aggregation of lentil proteins in concentrated emulsions.

Influence of Protein Hydrolysis on the Freeze-thaw Stability of Emulsions Prepared with Soy Protein - Dextran Conjugates

Protein hydrolysis on the freeze-thaw stability of emulsions prepared with soy protein - dextran conjugates were investigated. Soy protein isolate-dextran (SPI-D) and soy protein hydrolysates-dextran (SPH-D) conjugates with different degree of hydrolysis (DH) were formed by Maillard reaction. The formation of protein-polysaccharide conjugates between SPI/SPH and dextran molecules was confirmed by SDS-PAGE; this finding was consistent with the degree of glycation and the browning index. The freeze-thaw emulsion stability was investigated. The results confirmed that the SPH3-D (DH at 3%) emulsion with 3% DH of SPI exhibited the lowest creaming index after experiencing 1, 2, and 3 freeze-thaw cycles , with results of 7.69%, 20.74% and 31.30%, respectively. The SPH3-D emulsion had a significantly lower average particle size, which was reduced by 48.28% compared to the SPI-D emulsion. Meanwhile, the SPH3-D solution had low interfacial tension. The confocal laser scanning microscopy analysis indicated that the SPH3-D emulsions were strongly stable against the freeze-thaw treatment and could be used as effective emulsifiers in frozen foods.

Incorporation of bioactive dairy hydrolysate influences the stability and digestion behaviour of milk protein stabilised emulsions

The physical stability of emulsions containing bioactive ingredients is an important aspect of functional food development. This research investigated the effects of a bioactive dairy hydrolysate with anti-inflammatory effects on the properties of oil-in-water emulsions (23% rapeseed oil and 1.5% w/w protein). This was determined by monitoring the effects of various combinations of sodium caseinate (NaCas) and NaCas hydrolysate (NaCasH) (NaCas : NaCasH; 100 : 0, 40 : 60, 30 : 70, 20 : 80 and 0 : 100) on the physico-chemical characteristics (particle size distribution, microstructure, adsorption of protein to the interface, viscosity and creaming stability) of emulsions. Currently, there is growing interest in designing functional foods that modulate lipid digestion. Therefore, emulsion breakdown and subsequent release of free fatty acids (FFAs) from selected NaCasH stabilised emulsions (40 : 60 and 0 : 100) was monitored during in vitro gastrointestinal digestion and compared to the behaviour of emulsions stabilised by NaCas alone. Inclusion of NaCasH generally decreased the stability of the emulsions except when added at a NaCas : NaCasH ratio of 40 : 60 which resulted in emulsions with equivalent stability to the NaCas stabilised emulsions. Although the 40 : 60 combination provided an emulsion system as stable as NaCas, during simulated digestion, these emulsions demonstrated a slower rate of FFA release. This was attributed to the 40 : 60 stabilised emulsions having much larger flocculated lipid droplets than NaCas emulsions, which resulted in reduced surface area and fewer binding sites for lipase adsorption. Accordingly, the 40 : 60 emulsions were hydrolysed more slowly. Emulsions containing only NaCasH exhibited extensive coalescence prior to and during digestion and thus displayed the slowest release of FFA. The results suggest that including NaCasH in the emulsifier blend yields emulsions with modified digestibility and may form the basis of controlling the digestion and release of fat-soluble nutrients in formulated foods. However, further studies are required to optimise the stability of these emulsions before inclusion in such applications.

Physicochemical Properties of Liquid Infant Formula Stored at Different Temperatures

Changes in the physicochemical properties of ready-to-feed liquid infant formula (LIF) stored at different temperatures (10, 20, 30, and 40°C) for 6 mon, focusing on 5-hydroxymethylfurfural (HMF) content, color, pH, fat globule size distribution, and rheological properties were determined. The HMF content increased with storage time, and LIF stored at 40°C had a higher HMF content than that of LIF stored at 10°C. The lightness (L*) decreased while redness (a*) and yellowness (b*) increased with increasing HMF content. The fat globule size and pH of LIF stored at 10°C did not change. However, in the case of LIF stored at 30°C and 40°C, the fat globule size increased and the pH decreased during storage for 6 mon. LIF stored at 40°C had a higher apparent viscosity (η_a,10) than that of LIF stored at 10°C, and the shear-thinning behavior of LIF stored at higher temperature was stronger than that of LIF stored at low temperature. The physicochemical changes of LIF during storage were accelerated by Maillard reaction (MR) at higher storage temperatures. Therefore, even if LIF is aseptically manufactured, we recommend that sterilized LIF should be stored at low temperature in order to minimize quality changes during storage.

Effect of hydrolyzed whey protein on surface morphology, water sorption, and glass transition temperature of a model infant formula

Physical properties of spray-dried dairy powders depend on their composition and physical characteristics. This study investigated the effect of hydrolyzed whey protein on the microstructure and physical stability of dried model infant formula. Model infant formulas were produced containing either intact (DH 0) or hydrolyzed (DH 12) whey protein, where DH=degree of hydrolysis (%). Before spray drying, apparent viscosities of liquid feeds (at 55°C) at a shear rate of 500 s(-1) were 3.02 and 3.85 mPa·s for intact and hydrolyzed infant formulas, respectively. On reconstitution, powders with hydrolyzed whey protein had a significantly higher fat globule size and lower emulsion stability than intact whey protein powder. Lactose crystallization in powders occurred at higher relative humidity for hydrolyzed formula. The Guggenheim-Anderson-de Boer equation, fitted to sorption isotherms, showed increased monolayer moisture when intact protein was present. As expected, glass transition decreased significantly with increasing water content. Partial hydrolysis of whey protein in model infant formula resulted in altered powder particle surface morphology, lactose crystallization properties, and storage stability.