Encapsulation and stabilization of β-carotene by amylose inclusion complexes

ROS-responsive hydrogels: from design and additive manufacturing to biomedical applications

Hydrogels with intricate 3D networks and high hydrophilicity have qualities resembling those of biological tissues, making them ideal candidates for use as smart biomedical materials. Reactive oxygen species (ROS) responsive hydrogels are an innovative class of smart hydrogels, and are cross-linked by ROS-responsive modules through covalent interactions, coordination interactions, or supramolecular interactions. Due to the introduction of ROS response modules, this class of hydrogels exhibits a sensitive response to the oxidative stress microenvironment existing in organisms. Simultaneously, due to the modularity of the ROS-responsive structure, ROS-responsive hydrogels can be manufactured on a large scale through additive manufacturing. This review will delve into the design, fabrication, and applications of ROS-responsive hydrogels. The main goal is to clarify the chemical principles that govern the response mechanism of these hydrogels, further providing new perspectives and methods for designing responsive hydrogel materials.

Molecular modulating of amylopectin's structure promoted the formation of starch-unsaturated fatty acids complexes with controlled digestibility and improved stability to oxidation

In this study, waxy corn starch (WCS) was modified by amylosucrase and pullulanase, producing linear starch chains with elongated length that favored the complexation with unsaturated fatty acids (uFAs). Compared to native WCS, the amylosucrase-modified WCS with an average chain length of 47.8 was easier to form V-type complexes with oleic acid, while increasing the degree of unsaturation impeded the formation of V-type complexes. The pullulanase treatment hydrolyzed the branching points of amylosucrase-modified WCS and the linear starch chains could forme V-type complexes with oleic acid, linoleic acid, and linolenic acid, with V-type crystallinity decreasing from 38.2 % to 20.1 %. V-type complexes had a lower thermal stability than the B-type starch crystallites, and their peak melting temperature ranged from 67.2 to 79.0 °C. The content of resistant starch in the complexes was in the range of 21.8 %-40.9 % and the formation of V-type complexes decreased the susceptibility of uFAs to oxygen.

V-type granular starches prepared by maize starches with different amylose contents: An investigation in structure, physicochemical properties and digestibility

V-type granular starches (VGSs) were prepared via an ethanol-alkaline (EA) method using maize starch with different amylose contents, specifically, high amylose (HAM), normal maize starch (MS), and waxy maize starch (WS). The X-ray diffraction pattern of the native starch was completely transformed into a V-type pattern after the EA treatment, indicating a structural change in the starch granules. The VGSs prepared by HAM had highest relative crystallinity (31.8°), while the VGSs prepared by WS showed amorphous diffraction pattern. Excessive NaOH, however, would disrupt the formation of V-type structures and cause granular shape rupture. The quantity of double-helical structures, particularly those formed by amylopectin at the starch granules' periphery, significantly decreased. Conversely, single-helical structures formed by amylose increased. A notable rise in the relative crystallinity of V crystals. Four VGS samples, characterized by granular integrity, were chosen for the next investigation of physicochemical and digestive properties. VGS prepared from HAM exhibited higher granular integrity, lower cold-water swelling extent (59.0 and 161.0 cP), improved thermal stability (the value of breakdown as lower as 57.67 and 186.67 cP), and higher resistance to digestion (RS content was up to 10.38 % and 9.00 % higher than 5.86 % and 5.66 % of VGS prepared from WS and MS). The results confirmed that amylose content has a substantial impact on the microstructural and physicochemical properties of VGSs.

Interaction of high amylose corn starch with polyphenols: Modulating the stability of polyphenols with different structure against thermal processing

Polyphenols are known to undergo thermal degradation and their bioactivity is reduced. In this study, the thermal degradation of polyphenols was modulated by the complexation between polyphenols and high amylose corn starch (HACS). The inclusion complex between ferulic acid with hydrophobic group methoxy and HACS had the highest encapsulation efficiency (EE = 26.15 %), loading efficiency (LE = 2.38 %) and thermal stability (DPPH radical scavenging activity was reduced by only 5.99 % after baking). After complexing with HACS, protocatechuic acid with ortho-position hydroxyl group had a higher encapsulation rate and thermal stability than 3, 5-dihydroxybenzoic acid with meta-position hydroxyl. In addition, soy isoflavone with the higher logarithmic value of octanol-water partition coefficient (Log P = 3.66) resulted in higher encapsulation rate and thermal stability than naringenin (Log P = 2.11). The results suggest that the complexation between polyphenols and starch protects the bioactivity of polyphenols and improves the processing suitability of polyphenols.

Pickering emulsions stabilized by ternary complexes involving curcumin-modified zein and polysaccharides with different charge amounts for encapsulating β-carotene

In this research, zein was modified with curcumin to obtain covalent and non-covalent complexes. They were further covered with polysaccharides (gum arabic or gum karaya) possessing different surface charge amounts to obtain ternary nanoparticles for preparing novel antioxidant Pickering emulsions. The addition of curcumin to the zein-polysaccharide system significantly retarded the UV degradation of the encapsulated β-carotene (maximum retention ∼ 97%) and effectively inhibited the lipid oxidation of the emulsions. In vitro gastrointestinal digestion assays showed that gum karaya significantly delayed the release of free fatty acids, thereby improving the bioaccessibility of β-carotene (the highest bioavailability ∼ 38%). By comparing the performance of the complex particles, the weakly charged polysaccharides were superior to the highly charged ones, while zein-curcumin covalent binding was superior to non-covalent binding in the above experiments. This study provides innovative perspectives on the use of novel Pickering emulsions to provide ideal protection and bioavailability of lipophilic nutraceuticals.

Carotenoid degradation rate in milled grain of dent maize hybrids and its relationship with the grain physicochemical properties

Carotenoids in maize grain degrade during storage, but the relationship between their stability and the physicochemical properties of the grain is unclear. Therefore, the carotenoid degradation rate in milled grain of three dent hybrids differing in grain hardness was evaluated at various temperatures (-20, 4 and 22 °C). The carotenoid degradation rate was calculated using first-order kinetics based on the content in the samples after 7, 14, 21, 28, 42, 56, 70 and 90 days of storage and related to the physicochemical properties of the grain. The highest grain hardness was found in the hybrid with the highest zein and endosperm lipid concentration, while the lowest grain hardness was found in the hybrid with the highest amylose content and the specific surface area of starch granule (SSA). As expected, carotenoids in milled maize grain were most stable at -20 °C, followed by storage at 4 and 22 °C. Tested hybrids differed in the degradation rate of zeaxanthin, α-cryptoxanthin and β-carotene, and these responses were also temperature-dependent. In contrast, all hybrids showed similar degradation rate for lutein and β-cryptoxanthin regardless of the storage temperature. Averaged over the hybrids, the degradation rate for individual carotenoids ranked as follows: lutein < zeaxanthin < α-cryptoxanthin < β-cryptoxanthin < β-carotene. The lower degradation rate for most carotenoids was mainly associated with a higher content of zein and specific endosperm lipids, with the exception of zeaxanthin, which showed an opposite pattern of response. Degradation rate for lutein and zeaxanthin negatively correlated with SSA, but interestingly, small starch granules were positively associated with higher degradation rate for mostcarotenoids. Dent-type hybrids may differ significantly in carotenoid degradation rate, which was associated with specific physicochemical properties of the maize grain.

A novel method for obtaining high amylose starch fractions from debranched starch

High amylose starch shows wide applications in food and non-food-based industries. Traditional complex-precipitation approach for the amylose fractionation required a large volume of organic reagents and was possibly risky for food safety. The object of this work was to establish a novel method to obtain starch fractions rich in amylose from debranch starch through repeated short-term retrogradation and centrifugation. Four starch fractions were obtained with the amylose content of 52.08% (C1), 62.28% (C2), 63.58% (C3), and 64.74% (C4). The thermograms of samples displayed that multiple endothermic peaks were detected in C1 and C2 and only one endothermic peak with melting temperature over 120 °C were observed in C3 and C4, indicating their differences in retrogradation behavior. The chain length distribution results of sample exhibited that C1 and C2 contained more short chains (DP ≤ 24), while C3 and C4 consisted of mainly long chains (DP ≥ 25). Accordingly, the differences in fine structures could provide more choices for these fractionated high amylose starch to utilize in practical applications.

Effect of Water Vapor Sorption on Complex Formation in Amylose-lauric Acid Blend Powder

The purpose of this study was to understand the effect of relative humidity (RH) on amylose-lipid complex (ALC) formation in amylose-lauric acid blend powder held at 50 °C (temperature slightly higher than the melting point of lauric acid) using differential scanning calorimetry (DSC) and X-ray diffraction. From DSC curves, the melting of crystalized lauric acid and two melting peaks of ALC were observed depending on RH. ALC formation was confirmed by X-ray diffraction pattern. The melting enthalpy (∆Hm) of lauric acid in the sample held at RH 0 % was lower than that of lauric acid only though there was no ALC formation. This suggests that crystallization of lauric acid was prevented by amylose. The ∆Hm of lauric acid increased with an increase in RH up to 79.0 % because liquid lauric acid would have fused as the result of enhanced repulsive force between liquid lauric acid and hydrated amylose. The ∆Hm of ALC increased with an increase in RH between 79.0 and 95.0 %. For ALC formation, amylose has to be mobile in the system, but dehydrated amylose is in a glassy (immobilize) state. According to the glass to rubber transition behavior of amorphous polymer, amylose held at 50 °C is suggested to become rubbery (mobile) state at RH 76.0 %. This interpretation will explain the reason why ALC formation began to be observed at the RH range between 72.4 and 79.0 %.

Improved stability of β-carotene by encapsulation in SHMP-corn starch aerogels

This study aimed to prepare a starch-based aerogel with microporous network structure, and to investigate its physicochemical properties after β-carotene encapsulation. Corn starch aerogels (CSA) prepared with sodium hexametaphosphate (SHMP) as a cross-linking agent and β-carotene encapsulation were evaluated in terms of morphology, long- and short-range molecular order, bioavailability, and stability. After encapsulating β-carotene, the morphology of SHMP-CSA showed that the aerogels presented agglomeration, and the relative crystallinity increased from 17.2% to 22.2%. The characteristic bands of β-carotene were not found in the FT-IR pattern, and the short-range molecular order of aerogel was decreased, proving that β-carotene was well embedded in the aerogel. During the simulated in vitro release process, β-carotene was almost completely released. After ultraviolet or light irradiation, the retention rate of β-carotene was much higher than that in the control group. These results demonstrated that SHMP-CSA encapsulation could effectively improve the stability of β-carotene.

An investigation into structural properties and stability of debranched starch-lycopene inclusion complexes with different branching degrees

Debranched starch (DBS) has great probability as carrier for bioactive ingredients, but effects of branching degree (DB) on the complex formation of starch remain unclear. This study investigated the potential of DBS with different DB to load lycopene and characterized the structural properties of inclusion complexes. Glutinous rice starch was debranched to get DBS with different molecular weights, where DBS with a branching degree of 11.42 % had the greatest encapsulation efficiency (64.81 %). SEM, particle size, and zeta-potential results showed that the complexes form stable spherical crystals through electrostatic interactions. The structures of complexes were resolved by FTIR, XRD, TGA, and 13C CP/MAS NMR analytical techniques, indicating that lycopene can be loaded on DBS by the self-assembly through hydrophobic and hydrogen bonding interactions. Degradation experiments revealed that retention of complexes was significantly higher than the unencapsulated one. Our study reveals the structural features of the complex between DBS and lycopene, providing theoretical guidance for developing and producing novel nutraceuticals.

Formulation Approaches to Crystalline Status Modification for Carotenoids: Impacts on Dissolution, Stability, Bioavailability, and Bioactivities

Carotenoids, including carotenes and xanthophylls, have been identified as bioactive ingredients in foods and are considered to possess health-promoting effects. From a biopharmaceutical perspective, several physicochemical characteristics, such as scanty water solubility, restricted dissolution, and susceptibility to oxidation may influence their oral bioavailability and eventually, their effectiveness. In this review, we have summarized various formulation approaches that deal with the modification of crystalline status for carotenoids, which may improve their physicochemical properties, oral absorption, and biological effects. The mechanisms involving crystalline alteration and the typical methods for examining crystalline states in the pharmaceutical field have been included, and representative formulation approaches are introduced to unriddle the mechanisms and effects more clearly.

Comparative Evaluation of Hydrothermally Produced Rice Starch-Phenolic Complexes: Contributions of Phenolic Type, Plasma-Activated Water, and Ultrasonication

A thorough investigation of the viability of rice starch conjugation with three different phenolic compounds-gallic acid, sinapic acid, and crude Mon-pu (Glochidion wallichianum Muell Arg) (MP) extract-was conducted using a variety of developed methods which modified the techno-functionality and digestibility of the end product. With and without the aid of ultrasonication (US), phenolic compounds were complexed with hydrothermally pre-gelatinized rice starch prepared using distilled water or plasma-activated water (PAW). The in vitro digestibility, structural features, rheological and thermal properties, and in vitro antioxidant activity of starch-phenolic complexes were evaluated. The US-assisted starch-MP complex in water had the highest complexing index (CI) value (77.11%) and resistant starch (RS) content (88.35%), resulting in a more compact and stable ordered structure. In all complexes, XRD revealed a new minor crystalline region of V-type, which was stabilized by hydrogen bonding as defined by FTIR and H¹-NMR. Polyphenols caused a looser gel structure of starch, as imaged by a scanning electron microscope (SEM). Starch-phenolic complexes outperformed other complexes in terms of in vitro antioxidant activity. Gallic acid addition to starch molecules boosted DPPH scavenging activity, notably when synthesized in PAW regardless of US assistance, although having lower CI and RS values than the MP complex. Therefore, this research lays the groundwork for the efficient production of functional food ingredients based on rice starch and polyphenols.

Recent progresses in the delivery of β-carotene: From nano/microencapsulation to bioaccessibility

Beta-carotene (BC) as an efficient pro-vitamin is effective in improving vision, immune system and cognitive function as well as preventing coronary diseases and cancer. However, besides its poor chemical stability, the high lipophilic nature of BC reduces its dispersibility and consequently bioavailability which limits its application into food, pharmaceutical and nutraceuticals. Different carriers with vesicular or particulate structures have been studied and utilized for promoting BC solubility, dispersibility, and protection against diverse operational or environmental stresses and also controlling BC release and subsequent bioaccessibility. The current study, therefore reviews different micro/nanocarriers reported on BC encapsulation with special focusing on its bioavailability. Liposomal structures have been successfully used for enhancing BC stability and bioavailability. Besides, emulsion-based carriers including Pickering emulsions, nanoemulsions and microemulsions have been widely evaluated for BC encapsulation and protection. In addition, lipid-based nanoparticles and nanostructural carriers have also been applied successfully for this context. Moreover, gel structures including emulgels, hydrogels and oleogels are studied in some researches. Most of these delivery systems led to higher hydro-solubility and dispersibility of BC which consequently increased its bioavailability; thereupon could promote its application into food, cosmetic and nutraceutical products. However, for remarkable incorporation of BC and other bioactive compounds into edible products, the safety and toxicological aspects of these delivery system especially those designed in nano scale should be addressed in the further researches.

Kinetic Study of Encapsulated β-Carotene Degradation in Dried Systems: A Review

β-Carotene serves as a precursor of vitamin A and provides relevant health benefits. To overcome the low bioavailability of β-carotene from natural sources, technologies have been designed for its encapsulation in micro- and nano-structures followed by freeze-drying, spray-drying, supercritical fluid-enhanced dispersion and electrospraying. A technological challenge is also to increase β-carotene stability, since due to its multiple conjugated double bonds, it is particularly prone to oxidation. This review analyzes the stability of β-carotene encapsulated in different dried micro- and nano-structures by comparing rate constants and activation energies of degradation. The complex effect of water activity and glass transition temperature on degradation kinetics is also addressed, since the oxidation process is remarkably dependent on the glassy or collapsed state of the matrix. The approaches to improve β-carotene stability, such as the development of inclusion complexes, the improvement of the performance of the interface between air and oil phase in which β-carotene was dissolved by application of biopolymer combinations or functionalization of natural biopolymers, the addition of hydrophilic small molecular weight molecules that reduce air entrapped in the powder and the co-encapsulation of antioxidants of various polarities are discussed and compared, in order to provide a rational basis for further development of the encapsulation technologies.

Starch inclusion complex for the encapsulation and controlled release of bioactive guest compounds

The linear component of starch, especially amylose, is capable of forming inclusion complex (IC) with various small molecules. It could significantly modify the structure and properties of starch, and it could bring beneficial effects when bioactive compounds can be encapsulated. This review discusses the formation and characterization of the starch-guest IC and focuses on the recent developments in the use of starch ICs for the encapsulation and controlled release of bioactive guest compounds. A great number of guest compounds, such as lipids, aroma compounds, pharmaceuticals, and phytochemicals, were studied for their ability to be complexed with starch and/or amylose and some of the formed ICs were evaluated for the chemical stability improvement and the guest release regulation. Starch-guest ICs has a great potential to be a delivery system, as most existing studies demonstrated the enhancement on guest retention and the possibility of controlled release.

Complexation of 26-Mer Amylose with Egg Yolk Lipids with Different Numbers of Tails Using a Molecular Dynamics Simulation

A molecular dynamics simulation of mixtures of 26-mer amylose with three different egg yolk lipids, namely, cholesterol, triglyceride and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), demonstrated the formation of a stable complex. The 26-mer amylose fluctuated between a coiled and an extended helical conformation. The complex was a V-type amylose complex, with the hydrophobic tail of the lipids being inside the hydrophobic helical cavity of the amylose. The number of glucose units per turn was six for the two helical regions of the amylose-POPC complex and the palmitoyl tail region of the amylose-triglyceride complex. This value was eight for the cholesterol and the two-tail helical region in the amylose-triglyceride complex. Two tails of the POPC were in two different hydrophobic helical regions of the 26-mer amylose, whereas the palmitoyl tail of the triglyceride lay in one hydrophobic helical region and the linoleoyl and oleoyl tails both lay in another helical region, and the cross-sectional area of the latter was larger than the former to accommodate the two tails. The radii of the gyration of the complex were lower for all three cases compared to that of one single amylose. In addition, the stability of the complexes was ranked in the following order: POPC < cholesterol < triglyceride, with their average binding energy being −97.83, −134.09, and −198.35 kJ/mol, respectively.

Lipophilization and amylose inclusion complexation enhance the stability and release of catechin

Catechin is a natural phenolic compound with various bioactivities. However, it is unstable under light and heat environments. Amylose can form a single helical hydrophobic cavity to encapsulate and protect bioactive compounds. In this work, we applied amylose inclusion complexes (IC) to encapsulate a lipophilized catechin, i.e., hexadecyl catechin (HC), to improve its photostability and thermal stability. The formation of amylose-HC IC was characterized using differential scanning calorimetry, X-ray diffraction, and Fourier transform infrared spectroscopy. The photostability and thermal stability studies showed that the retention of guest molecules in IC was 86.1% ± 5.1% and 87.4% ± 0.6%, respectively, which was significantly higher than that of the catechin, HC, and amylose-HC physical mixture groups. Moreover, the in vitro release profile of IC demonstrated a steady and complete release of catechin. The findings show the amylose encapsulation of catechin is a promising technique to preserve bioactive compounds in food.

The effect of process variables on the physical properties and microstructure of HOPO nanoemulsion flakes obtained by refractance window

Refractance window (RW) drying is considered an emerging technique in the food field due to its scalability, energy efficiency, cost and end-product quality. It can be used for obtaining flakes from high-oleic palm oil (HOPO) nanoemulsions containing a high concentration of temperature-sensitive active compounds. This work was thus aimed at studying the effect of temperature, thickness of the film drying, nanoemulsion process conditions, and emulsion formulation on the flakes’ physical properties and microstructure. The results showed that HOPO flakes had good physical characteristics: 1.4% to 5.6% moisture content and 0.26 to 0.58 a_w. Regarding microstructure, lower fractal dimension (FDt) was obtained when RW drying temperature increased, which is related to more regular surfaces. The results indicated that flakes with optimal physical properties can be obtained by RW drying of HOPO nanoemulsions.

Fate of β-Carotene within Loaded Delivery Systems in Food: State of Knowledge

Nanotechnology has opened new opportunities for delivering bioactive agents. Their physiochemical characteristics, i.e., small size, high surface area, unique composition, biocompatibility and biodegradability, make these nanomaterials an attractive tool for β-carotene delivery. Delivering β-carotene through nanoparticles does not only improve its bioavailability/bioaccumulation in target tissues, but also lessens its sensitivity against environmental factors during processing. Regardless of these benefits, nanocarriers have some limitations, such as variations in sensory quality, modification of the food matrix, increasing costs, as well as limited consumer acceptance and regulatory challenges. This research area has rapidly evolved, with a plethora of innovative nanoengineered materials now being in use, including micelles, nano/microemulsions, liposomes, niosomes, solidlipid nanoparticles, nanostructured lipids and nanostructured carriers. These nanodelivery systems make conventional delivery systems appear archaic and promise better solubilization, protection during processing, improved shelf-life, higher bioavailability as well as controlled and targeted release. This review provides information on the state of knowledge on β-carotene nanodelivery systems adopted for developing functional foods, depicting their classifications, compositions, preparation methods, challenges, release and absorption of β-carotene in the gastrointestinal tract (GIT) and possible risks and future prospects.

Carotenoids: Considerations for Their Use in Functional Foods, Nutraceuticals, Nutricosmetics, Supplements, Botanicals, and Novel Foods in the Context of Sustainability, Circular Economy, and Climate Change

Carotenoids are versatile isoprenoids that are important in food quality and health promotion. There is a need to establish recommended dietary intakes/nutritional reference values for carotenoids. Research on carotenoids in agro-food and health is being propelled by the two multidisciplinary international networks, the Ibero-American Network for the Study of Carotenoids as Functional Foods Ingredients (IBERCAROT; http://www.cyted.org) and the European Network to Advance Carotenoid Research and Applications in Agro-Food and Health (EUROCAROTEN; http://www.eurocaroten.eu). In this review, considerations for their safe and sustainable use in products mostly intended for health promotion are provided. Specifically, information about sources, intakes, and factors affecting bioavailability is summarized. Furthermore, their health-promoting actions and importance in public health in relation to the contribution of reducing the risk of diverse ailments are synthesized. Definitions and regulatory and safety information for carotenoid-containing products are provided. Lastly, recent trends in research in the context of sustainable healthy diets are summarized.

The colorful world of carotenoids: a profound insight on therapeutics and recent trends in nano delivery systems

The therapeutic effects of carotenoids as dietary supplements to control or even treat some specific diseases including diabetic retinopathy, cardiovascular diseases, bacterial infections, as well as breast, prostate, and skin cancer are discussed in this review and also thoughts on future research for their widespread use are emphasized. From the stability standpoint, carotenoids have low bioavailability and bioaccessibility owing to their poor water solubility, deterioration in the presence of environmental stresses such as oxygen, light, and high heat as well as rapid degradation during digestion. Nanoencapsulation technologies as wall or encapsulation materials have been increasingly used for improving food product functionality. Nanoencapsulation is a versatile process employed for the protection, entrapment, and the delivery of food bioactive products including carotenoids from diverse environmental conditions for extended shelf lives and for providing controlled release. Therefore, we present here, recent (mostly during the last five years) nanoencapsulation methods of carotenoids with various nanocarriers. To us, this review can be considered as the first highlighting not only the potential therapeutic effects of carotenoids on various diseases but also their most effective nanodelivery systems.HighlightsBioactive compounds are of deep interest to improve food properties.Carotenoids (such as β-carotene and xanthophylls) play indispensable roles in maintaining human health and well-being.A substantial research effort has been carried out on developing beneficial nanodelivery systems for various carotenoids.Nanoencapsulation of carotenoids can enhance their functional properties.Stable nanoencapsulated carotenoids could be utilized in food products.

Preparation of amylose-poly(methyl methacrylate) inclusion complex as a smart nanocarrier with switchable surface hydrophilicity

Amylose, as a linear biopolymer, tends to form helical inclusion complexes with suitable guest species. This is of great importance for a variety of applications, especially in the pharmaceutical and food industry. In this study, we propose an approach for the preparation of a novel inclusion complex with switchable surface hydrophilicity. For this purpose, amylose was first conjugated to ethylene diamine hydrophilic residues. Then, the short chains of the hydrophobic poly(methyl methacrylate, PMMA) were grafted onto the cavity of amylose through atom transfer radical polymerization (ATRP). According to CD spectroscopy results, the amylose-PMMA inclusion complexes displayed solvent-directed helical chirality inversion using either DMSO or water as a solvent. Fluorescence imaging, AFM and DLS techniques revealed the solvent-dependent surface hydrophilicity of the amylose-PMMA inclusion complex. Interestingly, its morphological studies displayed a central cavity, which makes it suitable for carrying cargoes in drug delivery applications. Obtaining the amylose-polymer inclusion complexes with tailorable hydrophilicity of both the exterior surface and the interior cavity can be of paramount importance for a wide variety of bio-applications.

Effect of ultrasonication on the stability and storage of a soy protein isolate-phosphatidylcholine nanoemulsions

Phosphatidylcholine-soybean protein isolate (PC-SPI) nanoemulsions were prepared by ultrasonication. The effects of preparation conditions (SPI and PC addition, ultrasonic power and time) on the structural properties of the nanoemulsions and their storage stability were investigated. The results showed that the most optimal adsorption capacity and adsorption tightness at the oil-water interface under optimal conditions (1.5% SPI, 0.20% PC, 500 W ultrasonic power and 9 min ultrasonic time) were exhibited by the SPI-PC conjugate, which demonstrated that this nanoemulsions can be categorized as a high-quality emulsion suitable for research. To test its stability, and the high-quality nanoemulsion of β-carotene was stored. After degradation of the nanoemulsions during storage, β-carotene was released. The β-carotene retention rate of the high-quality emulsion was maintained above 86% at different temperatures in the absence of light for up to 30 days. This study provides new information for the development of transport and stability systems for nanoemulsions.

Encapsulation of tangeretin in PVA/PAA crosslinking electrospun fibers by emulsion-electrospinning: Morphology characterization, slow-release, and antioxidant activity assessment

In this work, water-resistant poly (vinyl alcohol) (PVA)/poly (acrylic acid) (PAA) electrospun fibers encapsulating tangeretin (Tan) were fabricated by emulsion-electrospinning. To optimize the electrospinning condition, the size and morphology of electrospun fibers were characterized by dynamic light scattering (DLS), optical light microscope, fluorescence microscopy, and scanning electron microscopy (SEM), respectively. The optimized initial concentration of PVA/PAA was 10% (w/w) with a mass ratio of 3:7. The time and temperature of optimized thermal crosslinking treatment were 2 h and 145 °C, respectively. The results of XRD and SEM showed that the Tan was successfully incorporated into smooth PVA/PAA electrospun fibers and those fibers possessed nano-diameter size and high porosity. The encapsulation of Tan had no significant impact on the antioxidant activity of PVA/PAA/Tan crosslinking electrospun fibers. The in vitro release test showed the PVA/PAA/Tan crosslinking electrospun fibers achieved durable release profiles and lower burst release rates than that from the pure Tan emulsion. Based on these results, it is concluded that PVA/PAA/Tan crosslinking electrospun fibers prepared by emulsion-electrospinning serve as a promising technique in the fields of water-insoluble drug delivery and slow-release.

New β-Carotene-Chitooligosaccharides Complexes for Food Fortification: Stability Study

The application of β-carotene in food industry is limited due to its chemical instability. The drawback may be overcome by designing new delivery systems. The stability of β-carotene complexed with chitooligosaccharides by kneading, freeze-drying and sonication methods was investigated under various conditions. The first-order kinetics parameters of the reaction of β-carotene degradation were calculated. The complexation improved the stability of β-carotene at high temperatures and ensured its long-term stability in the dark at 4 °C and 24 °C, and in the light at 24 °C. In water solutions, the best characteristics were exhibited by the complexes prepared by freeze-drying and sonication methods. In the powder form, the complexes retained their colour for the period of the investigation of four months. The calculated total colour differences of the complexes were qualified as appreciable, detectable by ordinary people, but not large. Therefore, β-carotene-chitooligosaccharides complexes could be used as a new delivery system suitable for food fortification.

Microencapsulated β-carotene preparation using different drying treatments

β-Carotene is one of the most abundant natural pigments in foods; however, usage of β-carotene is limited because of its instability. Microencapsulation techniques are usually applied to protect microencapsulated β-carotene from oxidization. In this study, β-carotene was microencapsulated using different drying processes: spray-drying, spray freeze-drying, coating, and spray granulation. The properties of morphology, particle size, water content, thermal characteristic, and chemical stability have been explored and compared. Scanning electron microscopy measurements showed that the coated powder had a dense surface surrounded by starch and suggested that the coating process gave a microencapsulated powder with the smallest bulk density and the best compressibility among the prepared powders. The chemical stabilities of microcapsules were evaluated during six months of storage at different temperatures. The coated powder had the highest mass fraction of β-carotene, which indicated that the coating process was superior to the three other drying processes.

Preparation and characterisation of novel water-soluble β-carotene-chitooligosaccharides complexes

β-carotene and chitooligosaccharides are bioactive compounds that find their application in the food industry as well in biomedical fields. However, the application of β-carotene is limited due to its very low water solubility, as well as its air, light and temperature sensitivity. The preparation of β-carotene-chitooligosaccharides complexes by mechanochemical methods was presented. Their physical and chemical properties including solubility, size, zeta potential and radical scavenging activity were investigated. The interaction of the two components was shown by NMR, FT-IR, and Raman spectroscopy. The complexes were analysed by scanning and transmission electron microscopy. Chitooligosaccharides could serve as a carrier for β-carotene delivery. The complexation did not cause the loss of the radical scavenging activity of β-carotene and guaranteed its water solubility.