The influence of the storage temperature on the stability of lipid microparticles containing ginger oleoresin

Potential use of red hibiscus flower extract for the production of spray-chilled microparticles: Characterization, stability, and bioaccessibility in vitro of anthocyanins

Microparticles (MLP) containing red hibiscus flower (Hibiscus rosa-sinensis) anthocyanins were produced by spray chilling, and characterized for physicochemical parameters, accelerated stability, and gastrointestinal release profile. Fully hydrogenated palm oil and cocoa butter were used as wall materials, at a lipid blend to hibiscus extract ratio of 70:30 (w/w). The lipid blends containing fully hydrogenated palm oil (FHPO) and cocoa butter (CB) were produced by ultrasound-assisted technique in the following FHPO to CB ratios: 100:0 (Control), 75:25, 50:50, 60:40, and 40:60. Increasing the cocoa butter content reduced the melting temperature and increased the unstable polymorphic behavior of the microparticles, resulting in amorphous characteristics. The microparticles exhibited higher viscosity, more agglomerates, and holes on the surface, and greater diameters. Characteristic peaks corresponding to the hibiscus extract were observed in the infrared spectra of the spray-chilled microparticles, indicating that the microencapsulation did not affect the anthocyanins. The antioxidant capacity of the red hibiscus anthocyanins ranged from 75 % to 79 %, with the best result observed for the treatment MLP_75:25. Higher antioxidant activities were observed for the lipid blends containing lower cocoa butter concentrations. Concerning the release profile of anthocyanins, the simulated GI digestion in vitro showed reduced release in the gastric tract and more intense release in the intestinal tract for an effective absorption of the antioxidant compounds in the small intestine. Furthermore, the treatment MLP_75:25 showed the highest encapsulation retention and lower total color difference in the accelerated stability study. Overall, the microparticles from all treatments were light-sensitive and thermosensitive at 35 °C. Thus, it is recommended to store the particles in a dark environment at temperatures below 35 °C for an effective use of the microparticles as natural food colorants.

Impact of cooking methods on the quality, sensory and flavor compounds of Sichuan pepper oleoresin

Sichuan pepper oleoresin (SPO) is highly appreciated by the food industry as well as consumers for flavor. To understand the overall flavor of SPO and how the quality changes during practical application, this study investigated the effects of five cooking methods on the quality, sensory, and flavor compounds of SPO. The differences in physicochemical properties and sensory evaluation responded to potential changes in SPO after cooking. The SPO after different cooking could be clearly distinguished by E-nose and PCA. Based on the qualitative analysis of volatile compounds, 13 compounds were screened by OPLS-DA that had the ability to explain above differences. Further analysis of taste substances revealed that pungent substances (hydroxy-α-sanshool) were significantly reduced in SPO after cooking. And the conclusion that the degree of bitterness significantly increased was predicted by E-tongue. The PLS-R model was developed to achieve correlation analysis between aroma molecules and sensory quality.

Microstructured lipid microparticles containing anthocyanins: Production, characterization, storage, and resistance to the gastrointestinal tract

Anthocyanins from grape peel extract have several biological properties and can act as a natural colorant and antioxidant agent. However, these compounds are susceptible to degradation by light, oxygen, temperature, and the gastrointestinal tract. Thus, this study produced microstructured lipid microparticles (MLMs) containing anthocyanins by the spray chilling technique and evaluated the particle stability. trans-free fully hydrogenated palm oil (FHPO) and palm oil (PO) were used as encapsulating materials in the ratios 90:10, 80:20, 70:30, 60:40, and 50:50, respectively. The concentration of grape peel extract was 40 % (w/w) in relation to the encapsulating materials. The microparticles were evaluated for thermal behavior by DSC, polymorphism, FTIR, size distribution and particle diameter, bulk density, tapped density, flow properties, morphology, phenolic compounds content, antioxidant capacity, and retention of anthocyanins. Furthermore, the storage stability of the microparticles was investigated at different temperatures (-18, 4, and 25 °C), and the anthocyanins retention capacity, kinetic parameters (half-life time and degradation constant rate), total color difference, and visual aspects were evaluated during 90 days of storage. The resistance of MLMs to the gastrointestinal tract was also evaluated. In general, higher FHPO concentrations increased the thermal resistance of the MLMs and both showed defined peaks of β' and β forms. The FTIR analysis showed that the MLMs preserved the original forms of their constituent materials even after atomization, with interactions between them. The increase in the PO concentration directly affected the increased mean particle diameter, agglomeration, and cohesiveness, as well as lower bulk density, tapped density, and flowability. The retention of anthocyanins in MLMs ranged from 81.5 to 61.3 % and was influenced by the particle size, with a better result observed for the treatment MLM_90:10. The same behavior was observed for the phenolic compounds content (1443.1-1247.2 mg GAE/100 g) and antioxidant capacity (1739.8-1660.6 mg TEAC/100 g). During the storage, MLMs made with FHPO to PO ratios of 80:20, 70:30, and 60:40 showed the highest stability for anthocyanin retention and color changes at the three temperatures (- 18 °C, 4 °C, and 25 °C). The gastrointestinal simulation in vitro revealed that all treatments were resistant to gastric phase and maintained a maximum and controlled release in the intestinal phase, demonstrating that FHPO together with PO are effective to protect anthocyanins during gastric digestion, and can improve the bioavailability of this compound in the human organism. Thus, the spray chilling technique may be a promising alternative for the production of anthocyanins-loaded microstructured lipid microparticles with functional properties for various technological applications.

Comparative Study of Cinnamon and Paprika Oleoresins Encapsulated by Spray Chilling and Particles from Gas Saturated Solutions Techniques: Evaluation of Physical Characteristics and Oleoresins Release in Food Simulated Media

In this study, cinnamon and paprika oleoresins were encapsulated by two technologies, respectively, spray chilling and particles from gas saturated solutions. Both technologies used palm oil as wall materials. The physical characteristics of the microparticles were compared as well as the oleoresins release behavior in high- and low-fat simulated food media. The spray chilling microparticles had an average diameter of 143.7 ± 1.5 µm, spherical shape, smooth surface, and passable flow property. In contrast, microparticles obtained by particles from gas saturated solutions (PGSS) showed an average diameter of 105.7 ± 0.6 µm, irregular shape, porous surface, poor flow property but higher encapsulation efficiency. In evaluating the compounds released in a simulated food medium, the spray chilling particles delivered 30.7%, while PGSS reached 23.1% after 1 h. Both microparticles well fitted the Kosmeyer-Peppas (R2 = 0.98 and 0.96 for spray chilling and PGSS) and Peppas-Sahlin models (R2 = 0.98 and 0.97 for spray chilling and PGSS). However, spray chilling microparticles showed a diffusion mechanism, while for PGSS ones erosion was the main mechanism. Despite the different physical characteristics, both microparticles proved to be possible facilitators in delivering oleoresins in food products.

Encapsulation of Lactobacillus acidophilus in solid lipid microparticles via cryomilling

We herein delved into the microencapsulation of Lactobacillus acidophilus (LA) into solid lipid microparticles (SLMs) via the cryomilling technique. For this aim, a frozen lipid mixture containing LA was pulverized at different times (7, 14, 21, 28, and 35 min) using a cryogenic mixer mill to produce probiotic-loaded SLMs. The impacts of different cryomilling durations on the SLMs properties (morphology, particle size, water activity, polymorphism, crystallinity, and thermal behavior) and the viability of LA were evaluated. Microencapsulation improved the viability of LA in simulated gastrointestinal fluids, heat stress, and different concentrations of salt and sucrose. SLMs also were suitable to be incorporated into foods. However, once the cryomilling time was prolonged, the viability of encapsulated LA declined, and particle size grew. The cryomilling technique showed great potential as an alternative approach for encapsulation due to the lack of solvent, short processing time, and simplicity.

Microencapsulation by spray chilling in the food industry: Opportunities, challenges, and innovations

Background

The increasing demand for healthy eating habits and the emergence of the COVID-19 pandemic, which resulted in a health crisis and global economic slowdown, has led to the consumption of functional and practical foods. Bioactive ingredients can be an alternative for healthy food choices; however, most functional compounds are sensitive to the adverse conditions of processing and digestive tract, impairing its use in food matrices, and industrial-scale applications. Microencapsulation by spray chilling can be a viable alternative to reduce these barriers in food processing.

Scope and approach

This review discusses the use of spray chilling technique for microencapsulation of bioactive food ingredients. Although this technology is known in the pharmaceutical industry, it has been little exploited in the food sector. General aspects of spray chilling, the process parameters, advantages, and disadvantages are addressed. The feasibility and stability of encapsulated bioactive ingredients in food matrices and the bioavailability in vitro of solid lipid microparticles produced by spray chilling are also discussed.

Main findings and conclusions

Research on the microencapsulation of bioactive ingredients by spray chilling for use in foods has shown the effectiveness of this technique to encapsulate bioactive compounds for application in food matrices. Solid microparticles produced by spray chilling can improve the stability and bioavailability of bioactive ingredients. However, further studies are required, including the use of lipid-based encapsulating agents, process parameters, and novel formulations for application in food, beverages, and packaging, as well as in vivo studies to prove the effectiveness of the formulations.

Encapsulation of ginger oleoresin in co-crystallized sucrose: development, characterization and storage stability

Ginger oleoresin was emulsified with gum acacia and encapsulated in a sucrose matrix by co-crystallization. The increased void space and surface area of sucrose provided a porous base for the incorporation of oleoresin. This co-crystallization led to modification from crystalline to irregular agglomerates, as evident from X-ray diffraction and differential scanning calorimetry. Hygroscopicity, water sorption isotherms and water activity demonstrated changes due to the change in crystallinity of sucrose. The active components such as [6]-, [8]- and [10]-gingerols and [6]-shogaol were quantified by HPLC. The encapsulation efficiency of [6]-gingerol was 45.59%. The storage kinetics at different relative humidity levels and temperatures indicated [6]-gingerol to be the most stable among the gingerols studied. A temperature of 25 °C and relative humidity of 33% proved to be the best storage conditions for the ginger flavoured sugar cubes. Thus, co-crystallization for the encapsulation of ginger oleoresin serves a dual purpose, i.e., protection and a mode of delivering a spicy flavour.

Microparticles loaded with fish oil: stability studies, food application and sensory evaluation

AIM

Evaluate the stability of microparticles loaded with fish oil produced by spray drying, spray chilling and by the combination of these techniques (double-shell) and use the microparticles for food application.

METHODS

Samples were stored for 180 days at 6 °C and 24 °C (75% RH). Performed investigations included encapsulation efficiency, moisture content, aw, size (laser scattering), colour (L*, a*, b*), polyunsaturated fatty acids (PUFAs) (GC), thermal behaviour (DSC) and crystalline structure (XRD).

RESULTS

Double-shell microparticles containing 26 wt% core material, 22.74 ± 0.02 µm (D0.5) and 2.05 ± 0.03 span index, 1.262 ± 0.026 wt% moisture content and 0.240 ± 0.001 of aw had PUFAs retention higher than 90 wt% during storage at 6 °C without changes in crystalline structure (β'-type crystals) and melting temperature (54 °C). The sensory evaluation suggested low fish oil release in oral phase digestion.

CONCLUSIONS

Double-shell microparticles were effective to protect and deliver PUFAs.

Recent Developments in Solid Lipid Microparticles for Food Ingredients Delivery

Health food has become a prominent force in the market place, influencing many food industries to focus on numerous bioactive compounds to reap benefits from its properties. Use of these compounds in food matrices has several limitations. Most of the food bio-additives are sensitive compounds that may quickly decompose in both food and within the gastrointestinal tract. Since most of these bioactives are highly or partially lipophilic molecules, they possess very low water solubility and insufficient dispersibility, leading to poor bioavailability. Thus, various methods of microencapsulation of large number of food bioactives have been studied. For encapsulation of hydrophobic compounds several lipid carriers and lipid platforms have been studied, including emulsions, microemulsions, micelles, liposomes, and lipid nano- and microparticles. Solid lipid particles (SLP) are a promising delivery system, can both deliver bioactive compounds, reduce their degradation, and permit slow and sustained release. Solid lipid particles have important advantages compared to other polymer carriers in light of their simple production technology, including scale up ability, higher loading capacity, extremely high biocompatibility, and usually low cost. This delivery system provides improved stability, solubility in various matrixes, bioavailability, and targeting properties. This article reviews recent studies on microencapsulation of selected bioactive food ingredients in solid lipid-based carriers from a point of view of production methods, characteristics of obtained particles, loading capability, stability, and release profile.