Comparison of high pressure treatment with conventional red wine aging processes: impact on phenolic composition

Chemical characterization and sensory properties of apple brandies aged with different toasted oak chips and ultra-high-pressure treatments

Aging is an important processing step of producing high quality apple brandy. In this study, apple brandies aged by traditional method and using three different toasted oak chips combined with or without ultra-high-pressure (UHP) treatment were prepared to compare their differences in chemical characterization and sensory properties. The results indicated that the brandies aged with toasted oak chip increased the levels of total acidity, volatile acidity and phenolic compounds. It also had the desirable color and taste. The brandy aged with toasted oak chip combined with UHP reached the highest levels of total acidity (1.06 g/L), total phenolic content (284.92 mg/L) and aromatic esters (49.37 %). Therefore, the aging with high toasted oak chip combined with UHP treatment could cut the traditional aging time to meet the same quality as traditional aging method. The results are very useful to develop a fast and efficient aging technique for brandy production.

Contribution of Starmerella bacillaris and Oak Chips to Trebbiano d'Abruzzo Wine Volatile and Sensory Diversity

In this study, six fermentation trials were carried out: co-inoculation and sequential inoculation of Saccharomyces cerevisiae and Starmerella bacillaris in the presence and absence of oak chips. Moreover, Starm. bacillaris strain was attached to the oak chips and co-inoculated or sequentially inoculated with S. cerevisiae. Wines fermented with Starm. bacillaris adhered to oak chips showed a higher concentration of glycerol (more than 6 g/L) than the others (about 5 g/L). These wines also showed a higher content of polyphenols (more than 300 g/L) than the others (about 200 g/L). The addition of oak chips induced an increase of yellow color (b* value of about 3). Oak-treated wines were characterized by a higher concentration of higher alcohols, esters and terpenes. Aldehydes, phenols and lactones were detected only in these wines, independently from the inoculation strategy. Significant differences (p < 0.05) were also observed in the sensory profiles. The fruity, toasty, astringency, and vanilla sensations were perceived as more intense in wines treated with oak chips. The white flower descriptor showed a higher score in wines fermented without chips. Oak surface-adhered Starm. bacillaris cells could be a good strategy to improve the volatile and sensory profile of Trebbiano d'Abruzzo wines.

Current Technologies to Accelerate the Aging Process of Alcoholic Beverages: A Review

The aging process contributes to the sensory evolution of alcoholic beverages, producing changes in the color and flavor of the final product. Traditionally, aging has occurred by storing beverages in wooden barrels for several months or years. To meet the demand for aged beverages, there is a need for large storage areas, a large number of wooden barrels, and, consequently, large volumes of stored product. Evaporation losses can also occur. In addition to the reactions of the beverage itself, there is also a transfer of wood compounds to the drink, which is later modified by successive oxidation reactions. This study addresses the alternative methods for accelerating the aging stage of beverages. These include the use of wood fragments, ultrasound, micro-oxygenation, pulsed electric field, high hydrostatic pressure, and microwave and gamma irradiation. These methods can be applied to optimize the process of extracting wood compounds, promote free radical formation, reduce oxidation reaction time, and accelerate yeast autolysis time. This study provides examples of some of the aforementioned methods. These technologies add value to the aging process, since they contribute to the reduction of production costs and, consequently, can increase commercial competitiveness.

Red Wine and Health: Approaches to Improve the Phenolic Content During Winemaking

There is ample evidence regarding the health benefits of red wine consumption due to its content of phenolic compounds, as an alternative to improve the state of health and prevent various diseases, being the implementation of procedures that allow a greater extraction and stability of phenolic compounds during the elaboration a key aspect. The first part of this review summarizes some studies, mostly at the preclinical level, on the mechanisms by which phenolic compounds act in the human organism, taking advantage of their antioxidant, anti-inflammatory, antitumor, antithrombotic, antiatherogenic, antimicrobial, antiviral, and other activities. Although the migration of grape components into the must/wine occurs during the winemaking process, the application of new technologies may contribute to increasing the content of phenolic compounds in the finished wine. Some of these technologies have been evaluated on an industrial scale, and in some cases, they have been included in the International Code of Oenological Practice by the International Organization of Vine and Wine (OIV). In this sense, the second part of this review deals with the use of these novel technologies that can increase, or at least maintain, the polyphenol content. For example, in the pre-fermentative stage, phenolic extraction can be increased by treating the berries or must with high pressures, pulsed electric fields (PEF), ultrasound (US), e-beam radiation or ozone. At fermentative level, yeasts with high production of pyranoanthocyanins and/or their precursor molecules, low polyphenol absorption, and low anthocyanin-β-glucosidase activity can be used. Whereas, at the post-fermentative level, aging-on-lees (AOL) can contribute to maintaining polyphenol levels, and therefore transmitting health benefits to the consumer.

Identification of Tentative Traceability Markers with Direct Implications in Polyphenol Fingerprinting of Red Wines: Application of LC-MS and Chemometrics Methods

This study investigated the potential of using the changes in polyphenol composition of red wine to enable a more comprehensive chemometric differentiation and suitable identification of authentication markers. Based on high performance liquid chromatography-mass spectrometry (HPLC-MS) data collected from Feteasca Neagra, Merlot, and Cabernet Sauvignon finished wines, phenolic profiles of relevant classes were investigated immediately after vinification (Stage 1), after three months (Stage 2) and six months (Stage 3) of storage, respectively. The data were subjected to multivariate analysis, and resulted in an initial vintage differentiation by principal component analysis (PCA), and variety grouping by canonical discriminant analysis (CDA). Based on polyphenol common biosynthesis route and on the PCA correlation matrix, additional descriptors were investigated. We observed that the inclusion of specific compositional ratios into the data matrix allowed for improved sample differentiation. We obtained simultaneous discrimination according to the considered oenological factors (variety, vintage, and geographical origin) as well as the respective clustering applied during the storage period. Subsequently, further discriminatory investigations to assign wine samples to their corresponding classes relied on partial least squares-discriminant analysis (PLS-DA); the classification models confirmed the clustering initially obtained by PCA. The benefits of the presented fingerprinting approach might justify its selection and warrant its potential as an applicable tool with improved authentication capabilities in red wines.

Recent advances in NMR-based metabolomics of alcoholic beverages

Alcoholic beverages have a complex chemistry that can be influenced by their alcoholic content, origin, fermentation process, additives, and contaminants. The complex composition of these beverages leave them susceptible to fraud, potentially compromising their authenticity, quality, and market value, thus increasing risks to consumers' health. In recent years, intensive studies have been carried out on alcoholic beverages using different analytical techniques to evaluate the authenticity, variety, age, and fermentation processes that were used. Among these techniques, NMR-based metabolomics holds promise in profiling the chemistry of alcoholic beverages, especially in Asia where metabolomics studies on alcoholic beverages remain limited.

Reactivity of flavanols: Their fate in physical food processing and recent advances in their analysis by depolymerization

Flavanols, a subgroup of polyphenols, are secondary metabolites with antioxidant properties naturally produced in various plants (e.g., green tea, cocoa, grapes, and apples); they are a major polyphenol class in human foods and beverages, and have recognized effect on maintaining human health. Therefore, it is necessary to evaluate their changes (i.e., oxidation, polymerization, degradation, and epimerization) during various physical processing (i.e., heating, drying, mechanical shearing, high-pressure, ultrasound, and radiation) to improve the nutritional value of food products. However, the roles of flavanols, in particular for their polymerized forms, are often underestimated, for a large part because of analytical challenges: they are difficult to extract quantitatively, and their quantification demands chemical reactions. This review examines the existing data on the effects of different physical processing techniques on the content of flavanols and highlights the changes in epimerization and degree of polymerization, as well as some of the latest acidolysis methods for proanthocyanidin characterization and quantification. More and more evidence show that physical processing can affect content but also modify the structure of flavanols by promoting a series of internal reactions. The most important reactivity of flavanols in processing includes oxidative coupling and rearrangements, chain cleavage, structural rearrangements (e.g., polymerization, degradation, and epimerization), and addition to other macromolecules, that is, proteins and polysaccharides. Some acidolysis methods for the analysis of polymeric proanthocyanidins have been updated, which has contributed to complete analysis of proanthocyanidin structures in particular regarding their proportion of A-type proanthocyanidins and their degree of polymerization in various plants. However, future research is also needed to better extract and characterize high-polymer proanthocyanidins, whether in their native or modified forms.

Phenolic and Aroma Changes of Red and White Wines during Aging Induced by High Hydrostatic Pressure

The aim of this study was to investigate use of high hydrostatic pressure (HHP) along with different antioxidants (glutathione and SO2) as an alternative method for wine preservation and production of low-SO2 wines. In the first phase of the study, low-SO2, young red and white wines were pressurized at three pressure levels (200, 400 and 600 MPa) for 5, 15 and 25 min at room temperature, and analyzed immediately after treatments. Additionally, for the wine aging experiment, red and white wines with standard-SO2, low-SO2+glutathione and low-SO2 content were treated with HHP treatment (200 MPa/5 min) and stored for 12 months in bottles. Color parameters, phenolic and aroma compounds were determined. The sensory evaluation was also conducted. HHP showed very slight, but statistically significant changes in the chemical composition of both red and white wine right after the treatment, and the main variations observed were related to the different pressures applied. Furthermore, during aging, most of the differences observed in chemical composition of pressurized wines, both red and white, were statistically significant, and greater in wines with a lower content of antioxidants. However, after 12 months of aging, some differences between unpressurized and pressurized samples with standard SO2 content were lost, primarily in aroma compounds for red wine and in color and phenolics for white wine. Additionally, similar values were obtained for mentioned characteristics of red and white wines in pressurized samples with standard SO2 and low SO2+glutathione, indicating that HHP in combination with glutathione and lower doses of SO2 might potentially preserve wine. The sensory analysis confirmed less pronounced changes in the sensory attributes of pressurized wines with higher concentration of antioxidants. Furthermore, the treatments applied had a slightly higher effect on the sensory properties of white wine.

Potential Applications of High Pressure Homogenization in Winemaking: A Review

High pressure homogenization (HPH) is an emerging technology with several possible applications in the food sector, such as nanoemulsion preparation, microbial and enzymatic inactivation, cell disruption for the extraction of intracellular components, as well as modification of food biopolymer structures to steer their functionalities. All these effects are attributable to the intense mechanical stresses, such as cavitation and shear forces, suffered by the product during the passage through the homogenization valve. The exploitation of the disruptive forces delivered during HPH was also recently proposed for winemaking applications. In this review, after a general description of HPH and its main applications in food processing, the survey is extended to the use of this technology for the production of wine and fermented beverages, particularly focusing on the effects of HPH on the inactivation of wine microorganisms and the induction of yeast autolysis. Further enological applications of HPH technology, such as its use for the production of inactive dry yeast preparations, are also discussed.