Milk fat crystal network as a strategy for delivering vegetable oils high in omega-9, -6, and -3 fatty acids

Crystallization behavior and compatibility analysis of palm kernel stearin/anhydrous milk fat blends and application

In this paper, the compatibility, phase behavior, and crystallization properties of the binary blends of palm kernel stearin (PKS) and anhydrous milk fat (AMF) were investigated by analyzing the solid fat content (SFC), thermal properties, polymorphism, and microstructure, with the aim of providing theoretical guidance for the blending of oils. The results showed that the PKS content primarily determined the SFC trend of the binary blends. However, the binary blends demonstrated poor miscibility and eutectic behavior was predominantly observed in the system, particularly at higher temperatures. Only α and β' forms appeared in this blended system. Simultaneously, the addition of PKS elevated the liquid phase transition temperature of the binary blends, considerably significantly increased their crystallization rate when the addition of PKS was more than 20% and increased the density and size of the fat crystals. Finally, the mixing design optimization method was used to get the most suitable ratio of the binary blends in the refrigerated cream system with PKS:AMF to be 0.914:0.086. The cream prepared with the above binary blends was indeed superior in overrun and firmness and had high stability. PRACTICAL APPLICATION: Some fats with special advantages are often limited in their wide application because of their poor crystallization ability. In this paper, the crystallization ability of fats is improved, and their application scenarios are increased through the combination of fats, so as to provide reference for the production of special fats for food.

Blends of palm kernel oil, soybean oil and palm stearin as an alternative to milk fat for frozen dessert application

In this study, the ternary blends of palm kernel oil (PKO), soybean oil (SBO) and two types of palm stearin (PS) (PS33 and PS38) were systematically prepared and evaluated for their application as an alternative to milk fat in frozen dessert. The physicochemical characteristics namely fatty acids constituent, triacylglycerols (TAGs) composition, melting behavior, solid fat content (SFC) and microstructure were studied. All ternary blends of PKO/SBO/PS33 and PKO/SBO/PS38 had comparable microstructure to that of milk fat. However, 80/15/5 (PKO/SBO/PS33) and 80/15/5 to 80/5/15 (PKO/SBO/PS38) mixtures were found to have similar SFC as milk fat at temperature above 20 °C, allowing these ternary blends to be completely melted at body temperature. With this, 80/15/5 (PKO/SBO/PS33) and 80/15/5 to 80/5/15 (PKO/SBO/PS38) mixtures were able to provide similar meltdown and mouth feel as milk fat at room temperature. Nonetheless, fatty acids constituent, TAGs composition and melting behavior of the blends were different from milk fat. This study showed that ternary blends of PKO, SBO and PS at ratios 80/15/5 (PKO/SBO/PS33) and 80/15/5 to 80/5/15 (PKO/SBO/PS38) can be potentially used as a milk fat alternative for frozen dessert application based on its similar microstructure and SFC profile as the milk fat.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13197-022-05507-z.

Physicochemical characteristics of anhydrous milk fat mixed with fully hydrogenated soybean oil

There is a growing demand for fats that confer structure, control the crystallization behavior, and maintain the polymorphic stability of lipid matrices in foods. In this context, milk fat has the potential to meet this demand due to its unique physicochemical properties. However, its use is limited at temperatures above 34 °C when thermal and mechanical resistance are desired. The addition of vegetable oil hard fats to milk fat can alter its physicochemical properties and increase its technological potential. This study evaluated the chemical composition and the physical properties of lipid bases made with anhydrous milk fat (AMF) and fully hydrogenated soybean oil (FHSBO) at the proportions of 90:10; 80:20; 70:30; 60:40; and 50:50 (% w/w). The increased in FHSBO concentration resulted in blends with higher melting point, which the addition of 10% of FHSBO increase the melting point in 12 °C of the lipid base. Also, FHSBO contributed for a higher thermal resistance conferred by the coexistence of polymorphs β' and β, which remained stable for 90 days. Co-crystallization was observed for all blends due to the total compatibility of milk fat with the fully hydrogenated soybean oil. The results suggest a potential of all blends for various technological applications, makes milk fat more appropriate to confer structure, and improve the polymorph stability in foods. The blends presenting singular characteristics according to the desired thermal stability, melting point, and polymorphic habit.