Astaxanthin-loaded emulsion gels stabilized by Maillard reaction products of whey protein and flaxseed gum: Physicochemical characterization and in vitro digestibility

Agar-gelatin Maillard conjugates used for Pickering emulsion stabilization

A few protein- and polysaccharide-based particles have shown promising potential as stabilizers in multi-phase food systems. By incorporating polymer-based particles and modifying the wettability of colloidal systems, it is possible to create particle-stabilized emulsions with excellent stability. A Pickering emulsifier (AGMs) with better emulsifying properties was obtained by the Maillard reaction between acid-hydrolysed agar and gelatin. Laser confocal microscopy imaging revealed that AGMs particles can be used as solid emulsifiers to produce a typical O/W Pickering emulsion, with AGMs adsorbing onto the droplet surface to form a dense interfacial layer. Cryo-scanning electron microscopy analysis showed that AGMs self-assembled into a three-dimensional network structure, which prevented droplets aggregation through strong spatial site resistance, contributing to emulsion stabilization. These emulsions exhibited stability within a pH range of 1 to 11, NaCl concentrations not exceeding 300 mM, and at temperatures below 80 °C. The most stable emulsion oil-water ratio was 6:4 at a particle concentration of 0.75 % (w/v). AGMs-stabilized Pickering emulsion was utilized to create a semi-solid mayonnaise as a replacement for hydrogenated oil. Rheological analysis demonstrated that low-fat mayonnaise stabilized with AGMs exhibited similar rheological behavior to traditional mayonnaise, offering new avenues for the application of Pickering emulsions in the food industry.

Encapsulation of lycopene in Pickering emulsion stabilized by complexes of whey protein isolate fibrils and sodium alginate: Physicochemical property, structural characterization and in vitro digestion property

In present study, whey protein isolate fibrils and sodium alginate complexes (WPIFs-SA) were prepared and further used to stabilize Pickering emulsions for lycopene delivery. The optimal interaction between WPIFs and SA occurred at pH 3.0, with a mass ratio of 2:1. Increasing the oil fractions and the content of WPIFs-SA complexes significantly improved Pickering emulsions' stability, concurrently reducing droplet size and increasing viscoelasticity. Meanwhile, it facilitated the formation of a thicker protective layer and a compact network structure around the oil droplets, offering better protection for lycopene against thermal and photo degradation. In vitro digestion studies revealed that as the oil fractions and complex contents increased, the lipolysis degree decreased. The engineered WPIFs-SA Pickering emulsion could be used as an innovative delivery system for the protection and delivery of lycopene.

Preparation and characterization of bovine serum albumin/chitosan composite nanoparticles for delivery of Antarctic krill peptide

BACKGROUND

Antarctic krill peptide (AKP) has gained considerable interest because of its multiple biological functions. However, its application may be limited by its poor stability and susceptibility to degradation. Encapsulation of AKP using a nanoparticle delivery system is an effective way to overcome these problems. In the present study, bovine serum albumin (BSA) and chitosan (CS) were used as delivery vehicles to encapsulate AKP.

RESULTS

The results revealed that the particle size (83.3 ± 4.4-222.4 ± 32.7 nm) and zeta-potential (35.1 ± 0.7-45.0 ± 2.7 mV) of nanoparticles (NPs) increased with the increasing content of BSA, but the polydispersity index decreased (1.000 ± 0.002 to 0.306 ± 0.011). Hydrogen bonding, hydrophobic and electrostatic interactions were the main forces to form BSA/CS-AKP NPs. X-ray diffraction revealed that AKP was encapsulated by BSA/CS. Scanning electron microscopy images exhibited that the NPs were spherical in shape, uniform in size and tightly bound. BSA/CS-AKP NPs exhibited excellent stability in the pH range (2-5) and after 15 days of storage, and could hinder the release of AKP in simulated gastric environment and promote the release of AKP in simulated intestinal environment. After simulated digestion, the hypoglycemic activity of encapsulated AKP was better than that of unencapsulated AKP.

CONCLUSION

Our results revealed that the BSA/CS showed great potential for protecting and delivering AKP. © 2024 Society of Chemical Industry.

Construction of emulsion gel based on the interaction of anionic polysaccharide and soy protein isolate: Focusing on structural, emulsification and functional properties

In this study, the effects on the structures and emulsion gels of carrageenan (CA) and gum arabic (GA) with soybean protein isolate (SPI) were investigated. The results showed that CA and GA exposed hydrophobic groups to SPI, and formed complexes through non-covalent interactions to improve the stability of the complexes. Furthermore, the emulsion gels based on the emulsions exhibited that CA formed emulsion-filled gels with higher elasticity, stronger gel strength, and thermal reversibility, whereas GA formed emulsion-aggregated gels with higher viscosity, and a weak-gel network. The results of digestion showed that, CA was more helpful to slow down the release of free fatty acids and protect vitamin E during digestion. Compared with SPI-GA emulsion gel, SPI-CA emulsion gel had better physicochemical properties and stronger network structure. The results of this study may be useful in the development of anionic polysaccharides that interact with SPI, and they may provide new insights on the preparation of emulsion gels that slowly release fat-soluble nutrients.

Emulsions delivery systems of functional substances for precision nutrition

Many functional substances are chemically unstable and exhibit variable water/oil solubility, reducing their bioavailability and efficacy. It is necessary to devise effective measures to improve the unfavorable properties of functional substances and maximize their potential benefits in nutritional interventions. Therefore, the development and application of edible emulsion-based delivery systems for these functional substances using food-grade materials would be highly beneficial for the food industry. In recent years, Pickering emulsions have garnered significant attention in the scientific community due to their characteristic of being free from surfactants. This section focuses on emphasizing the design and preparation of emulsion delivery systems based on functional substances. Additionally, we summarize the current applications of emulsion delivery systems in functional substances. This chapter also discusses the potential advantages of Pickering emulsion systems in the precise nutrition field, including high targeting specificity and nutritional intervention for various diseases. Well-designed Pickering emulsion delivery carriers for functional substances can enhance their stability in food processing and in vivo digestion. To meet the nutritional needs of specific populations for functional foods, utilizing emulsion delivery systems to improve the bioavailability of functional substances will provide a theoretical basis for the precise nutrition of functional substances in functional foods.

Enhanced functional properties of pea protein isolate microgel particles modified with sodium alginate: Mixtures and conjugates

Protein microgels are emerging as versatile soft particles due to their desirable interfacial activities and functional properties. In this study, pea protein isolate microgel particles (PPIMP) were prepared by heat treatment and transglutaminase crosslinking, and PPIMP were non-covalently and covalently modified with sodium alginate (SA). The effects of polymer ratio and pH on the formation of PPIMP-SA mixtures and conjugates were investigated. The optimal ratio of PPIMP and SA was found to be 20:1, with the optimal pH being 7 and 10, respectively. PPIMP-SA conjugates were prepared by Maillard reaction. It was found that ultrasound (195 W, 40 min) enhanced the degree of glycation of PPIMP, with a highest value of 37.21 ± 0.71 %. SDS-PAGE, browning intensity and FTIR data also confirmed the formation of PPIMP-SA conjugates. Compared with PPIMP and PPIMP-SA mixtures, PPIMP-SA conjugates exhibited better thermal stability, antioxidant, emulsifying and foaming properties, which opens up opportunities for protein microgel in various food applications.

Effect of gum arabic and thermal modification of whey protein isolate on the characteristics of Cornus officinalis flavonoid microcapsules

Whey protein isolates (WPIs) were treated at 50, 60, 70, and 80°C to obtain thermally modified WPI. Gum arabic (GA) and thermal modification of WPI were used as novel wall materials to improve the quality of Cornus officinalis flavonoid (COF) microcapsules using microwave freeze-drying technique in this study. Results showed that all the thermal modification treatment decreased emulsifying activity index of WPI, whereas the solubility and emulsifying stability index (ESI) of WPI gradually increased with the increase of heating temperature. Compared to the untreated protein, the thermal modification treatment at 70°C increased the solubility and ESI of WPI by 14.91% ± 0.71% and 26.70% ± 0.94%, respectively. The microcapsules prepared with the modified protein at 60°C had the highest encapsulation efficiency (95.13% ± 2.36%), the lowest moisture content (1.42% ± 0.34%), and the highest solubility (84.41% ± 0.91). Scanning electron microscopy images showed that COF microcapsules were uniformly spherical, and the sizes of the microcapsules were in the following order: 12.42 ± 0.37 µm (80°C) > 11.7 ± 0.23 µm (untreated group) > 9.44 ± 0.33 µm (60°C) > 9.24 ± 0.14 µm (50°C) > 7.69 ± 0.29 µm (70°C). In the simulated in vitro digestion experiments, the release rate of COF microcapsules in the gastric digestion phase was less than that in the intestinal digestion phase, and it reached 66.46% at intestinal digestion phase. These results suggested that heated WPI and GA could be an effective nanocarrier to enhance the stability of COF.

Physicochemical and functional characteristics of glycated collagen protein from giant salamander skin induced by ultrasound Maillard reaction

Chinese giant salamander skin collagen (CGSSC) was successfully conjugated with glucose (Glu)/xylose (Xy) by ultrasound Maillard reaction (MR) in nature deep eutectic solvents (NADES). The effects of ultrasound and reducing sugar types on the degree graft (DG) of MR products (MRPs), as well as the influence of DG on the structure and functional properties of MRPs were investigated. The results indicated that the ultrasound assisted could markedly enhance the MR of CGSSC, and low molecular weight reducing sugars were more reactive in MR. The ultrasound MR significantly changed the microstructure, secondary and tertiary structures of CGSSC. Moreover, the free sulfhydryl content of MRPs were increased, thus enhancing the surface hydrophobicity, emulsifying properties and antioxidant activity, which were positively correlated with DG. These findings provided theoretical insights into the effects of ultrasound assisted and different sugar types on the functional properties of collagen induced by MR.

Fabrication and characterization of dihydromyricetin-loaded microcapsules stabilized by glyceryl monostearate and whey protein-xanthan gum

Dihydromyricetin (DMY) is a lipophilic nutrient with various potential health benefits; however, its poor storage stability and low solubility and bioavailability limit its applications. This study aims to encapsulate DMY in microcapsules by membrane emulsification and freeze-drying methods to overcome these issues. Glyceryl monostearate (GMS, solid lipid) and octyl and decyl glycerate (ODO, liquid lipid) were applied as the inner cores. Whey protein and xanthan gum (XG) were used as wall materials. The prepared microcapsules had an irregular blocky aggregated structure with rough surfaces. All the microcapsules had a DMY loading of 0.85 %-1.1 % and encapsulation efficiency (EE) >85 %. GMS and XG increased the DMY loading and EE. The addition of GMS and an increased XG concentration led to a decrease in the rehydration rate. The in vitro release and digestion studies revealed that GMS and XG controlled the release and digestion of DMY. The chemical stability results indicated that GMS and XG protected DMY against oxidation. An antioxidant capacity study showed that GMS and XG helped DMY in the microcapsules exert antioxidant effects. This research study provides a platform for designing microcapsules with good stability and high bioavailability to deliver lipophilic bioactive compounds.

Effects of sucrase enzymatic hydrolysis combined with Maillard reaction on soy protein hydrolysates: Bitterness and functional properties

In this study, sucrase was added to convert non-reducing sugars into reducing sugars in skim obtained by enzyme-assisted aqueous extraction processing (EAEP), then the variation of soy protein hydrolysates (SPH) from the skim under different Maillard reaction times were studied. We conducted one-factor experiment and selected 2 mg/mL sucrase for enzymatic hydrolysis for 2 h. The structure of SPH was investigated by Fourier transform infrared spectroscopy, intrinsic fluorescence spectroscopy, and amino acid composition. Results showed that the Maillard reaction loosened the SPH structure and produced new functional groups. Sensory evaluation, electronic tongue, electronic nose and GC-MS were used to study the sensory characteristics of SPH, we found that the bitterness value was significantly reduced to 1.71 from 4.63 after 2 h of the Maillard reaction. The change of bitterness was related to amino acid composition and the production of pyrazine. Additionally, the iron reduction ability, DPPH free radical scavenging ability, and emulsifying activity reached the highest at 2 h of reaction with 0.80, 73.94 %, and 56.09 %. The solubility, emulsifying stability, and foaming capacity increased and gradually stabilized with the increasing reaction time. Therefore, this paper presents an effective method for generating SPH with low bitterness and high functional properties.

Effect of extrusion temperature on the structure and emulsifying properties of soy protein isolate-oat β-glucan conjugates formed during high moisture extrusion

In this study, extrusion was used to induce Maillard reaction between soy protein isolate (SPI) and oat β-glucan (OG) and effect of extrusion temperature (70, 90, 110 and 130 °C) on the structure and emulsifying properties of extruded SPI-OG was investigated. SDS-PAGE and fluorescence spectroscopy provided evidence for the formation of SPI-OG conjugates during extrusion. The results showed that 90 °C and 110 °C extruded SPI-OG had the highest level of degree of glycosylation (were 14.34% and 13.70%, respectively, p > 0.05). Structural analysis found that α-helix content of extruded SPI-OG decreased by 8.93-13.14% compared to mixture of SPI and OG. Meanwhile, extruded SPI-OG had lower protein solubility (29.83-34.38%) and surface hydrophobicity (1549-2027), larger average particle size (2363-4807 nm) and higher emulsion stability (74.33-90.15%). Therefore, these findings may provide a theoretical basis for the development of novel food emulsion stabilizers.

Construction of astaxanthin loaded Pickering emulsions gel stabilized by xanthan gum/lysozyme nanoparticles with konjac glucomannan from structure, protection and gastrointestinal digestion perspective

Pickering emulsion gels have demonstrated their efficacy in delivering bioactive compounds by effectively preventing droplet aggregation, Ostwald maturation, and phase separation through gel network. Astaxanthin (AST) Pickering emulsion gels stabilized by xanthan gum/lysozyme nanoparticles (XG/Ly NPs) and konjac glucomannan (KGM) were studied from rheological tests and textural analysis. The Pickering emulsion gel demonstrated the highest water holding capacity (WHC) at concentration of 2 % XG/Ly NPs, 60 % oil phase fraction, and 0.5 % KGM concentration. The presence of KGM was observed to enhance the plasticity of Pickering emulsion gels, as evidenced by the dense gel network structure formed on the surface of the droplets. Furthermore, the utilization of Pickering emulsion gels containing AST has demonstrated enhanced photostability and a protective effect on AST, as evidenced by antioxidant experiments. Moreover, the incorporation of KGM in Pickering emulsion gels has been found to reduce the release of free fatty acids (FFA) and the bioaccessibility of AST, as indicated in vitro digestion results. Overall, these findings indicate the potential of KGM-based Pickering emulsion gels as effective vehicles for the delivery of hydrophobic bioactive compounds within the food industry.

Recent Advances in Acoustic Technology in Food Processing

The development of food industry technologies and increasing the sustainability and effectiveness of processing comprise some of the relevant objectives of EU policy. Furthermore, advances in the development of innovative non-thermal technologies can meet consumers' demand for high-quality, safe, nutritious, and minimally processed foods. Acoustic technology is characterized as environmentally friendly and is considered an alternative method due to its sustainability and economic efficiency. This technology provides advantages such as the intensification of processes, increasing the efficiency of processes and eliminating inefficient ones, improving product quality, maintaining the product's texture, organoleptic properties, and nutritional value, and ensuring the microbiological safety of the product. This review summarizes some important applications of acoustic technology in food processing, from monitoring the safety of raw materials and products, intensifying bioprocesses, increasing the effectiveness of the extraction of valuable food components, modifying food polymers' texture and technological properties, to developing biodegradable biopolymer-based composites and materials for food packaging, along with the advantages and challenges of this technology.

Real-time spatial quantification of gastric acid diffusion in whey protein gels with different NaCl concentrations by wide-field fluorescence microscopy

Gastric acid diffusion and penetration constitute an essential process in the structural breakdown and enzymatic hydrolysis of solid food during digestion. This study aimed to quantify the real-time diffusion and spatial distribution of gastric acids in whey protein isolate (WPI) gels in the presence of 0-0.05 M NaCl during simulated digestion using a wide-field fluorescence microscope. For all the gels regardless of NaCl concentration, the outer surface rapidly developed a near-saturated layer, resulting in a higher normalized gastric acid concentration in the outer layer than in the inner layer. The pH decrease was more significant for the gels at a higher NaCl concentration (i.e., 0.05 M) due to the formation of a more discontinuous and looser network structure that would facilitate acid diffusion into the gel matrix and decrease the gel buffering capacity. Consistently, the effective diffusion coefficient (D_A) estimated via the Fick diffusion model was 6.19 × 10^-10 m²/s for 0.05 M WPI-RITC gels, significantly higher than 0.015 M (4.46 × 10^-10 m²/s) and 0 M (3.54 × 10^-10 m²/s) gels. The present study has provided a quantitative understanding of the diffusion process and spatial distribution of gastric acids within the WPI gel matrix in real-time during in vitro gastric digestion as influenced by NaCl concentration.

Solubility and Stability of Carotenoids in Ammonium- and Phosphonium-Based Ionic Liquids: Effect of Solvent Nature, Temperature and Water

Ionic liquids (ILs) have arisen as alternatives to organic solvents and been used in natural pigment extraction in recent decades. However, the solubility and stability of carotenoids in phosphonium- and ammonium-based ILs are insufficiently explored. In this work, the physicochemical properties of the ILs, and the dissolution behavior and storage stability of three carotenoids (astaxanthin, β-carotene, and lutein) in the IL aqueous solution were investigated. The results showed that the solubility of the carotenoids in the acidic IL solution is higher than that in the alkaline IL solution, and the optimal pH is about 6. The solubility of astaxanthin (40 mg/100 g), β-carotene (105 mg/100 g), and lutein (5250 mg/100 g) was the highest in tributyloctylphosphonium chloride ([P₄₄₄₈]Cl) due to the van der Waals forces with [P₄₄₄₈]⁺ and hydrogen bonding with Cl^-. A high temperature was beneficial to improve the solubility, but it can reduce the storage stability. Water has no significant effect on the carotenoid stability, but a high water content decreases the carotenoid solubility. A IL water content of 10-20%, an extraction temperature of 338.15 K, and a storage temperature of less than 298.15 K are beneficial for reducing the IL viscosity, improving carotenoid solubility, and maintaining good stability. Moreover, a linear correlation was found between the color parameters and carotenoid contents. This study provides some guidance for screening suitable solvents for carotenoid extraction and storage.

Tuning egg yolk granules/sodium alginate emulsion gel structure to enhance β-carotene stability and in vitro digestion property

In this study, emulsion gels were constructed by ionic gelation method using egg yolk granules/sodium alginate bilayers emulsion. In particular, the main driving force of the emulsion gels was controlled by adjusting pH. Compared with pH 7.0, the mechanical properties of EYGs emulsion gel were enhanced at pH 4.0 (G' > G″). The interfacial protein aggregation that occurred at pH 4.0 promoted the compactness of the EYGs emulsion gel structure along with enhanced capillary effect. The emulsion gel structure tended to be complete at 1 % SA of pH 4.0, for the electrostatic interaction required more SA molecules involved in maintaining emulsion gel structural stability. The denser emulsion gel structure of pH 4.0 than pH 7.0 improved storage stability, FFA releasing, and chemical stability of β-carotenes. Bioaccessibility of β-carotenes also decreased to achieve sustained release. This study provides a theoretical basis for tuning emulsion gel structure to adjust encapsulation stability and in vitro digestion characteristics of active ingredients.

Food protein glycation: A review focusing on stability and in vitro digestive characteristics of oil/water emulsions

Recently, increasing studies have shown that the functional properties of proteins, including emulsifying properties, antioxidant properties, solubility, and thermal stability, can be improved through glycation reaction under controlled reaction conditions. The use of glycated proteins to stabilize hydrophobic active substances and to explore the gastrointestinal fate of the stabilized hydrophobic substances has also become the hot spot. Therefore, in this review, the effects of glycation on the structure and function of food proteins and the physical stability and oxidative stability of protein-stabilized oil/water emulsions were comprehensively summarized and discussed. Also, this review sheds lights on the in vitro digestion characteristics and edible safety of emulsion stabilized by glycated protein. It can further serve as a research basis for understanding the role of structural features in the emulsification and stabilization of glycated proteins, as well as their utilization as emulsifiers in the food industry.

Improving the biological activities of astaxanthin using targeted delivery systems

The antioxidant and anti-inflammatory properties of astaxanthin (AST) enable it to protect against oxidative stress-related and inflammatory diseases with a range of biological effects. These activities provide the potential to develop healthier food products. Therefore, it would be beneficial to design delivery systems for AST to overcome its low stability, control its release, and/or improve its bioavailability. This review discusses the basis for AST's various biological activities and the factors limiting these activities, including stability, solubility, and bioavailability. It also discusses the different systems available for the targeted delivery of AST and their applications in enhancing the biological activity of AST. These include systems that are candidates for preventive and therapeutic effects, which include nerves, liver, and skin, particularly for possible cancer reduction. Targeted delivery of AST to specific regions of the gastrointestinal tract, or more selectively to target tissues and cells, can be achieved using targeted delivery systems to increase the biological activities of AST.

Fabrication and characterization of the H/J-type aggregates astaxanthin/bovine serum albumin/chitosan nanoparticles

Astaxanthin is a natural liposoluble ketocarotenoid with various biological activities. Hydrophobic astaxanthin with C_2h symmetry can self-assembly form H-type aggregates and J-type aggregates in hydrated polar solvents. However, astaxanthin and its aggregates are limited by its water insolubility and chemical instability. Here, the biological macromolecules bovine serum albumin (BSA) and chitosan were chosen as protein-polysaccharides based delivery systems for astaxanthin aggregates by molecular self-assembly method. The precise prepared H-ABC-NPs and J-ABC-NPs suspensions were both near spheres with hydrodynamic size around 281 ± 9 nm and 368 ± 5 nm and zeta potentials around +26 mV and +30 mV, respectively. Two types of astaxanthin aggregates were distinguished, water-dispersible, and stable in nanocarriers through UV-vis spectra observation. The encapsulation efficiency of the astaxanthin in ABC-NPs was above 90 %. Fourier transform infrared spectroscopy (FTIR) and circular dichroism (CD) analyses indicated that the dominant driving forces of ABC-NPs formation mainly included electrostatic, hydrophobic interactions and hydrogen bonding. These results offer an elegant opportunity for the protein-polysaccharides delivery systems, and provide an important perspective for applying novel water-dispersed astaxanthin aggregates products in nutrition and medicine industry.

Construction of lipid-biomacromolecular compounds for loading and delivery of carotenoids: Preparation methods, structural properties, and absorption-enhancing mechanisms

Due to the unstable chemical properties and poor water solubility of carotenoids, their processing adaptation and oral bioavailability are poor, limiting their application in hydrophilic food systems. Lipid-biomacromolecular compounds can be excellent carriers for carotenoid delivery by taking full advantage of the solubilization of lipids to non-polar nutrients and the water dispersion and gastrointestinal controlled release properties of biomacromolecules. This paper reviewed the research progress of lipid-biomacromolecular compounds as encapsulation and delivery carriers of carotenoids and summarized the material selection and preparation methods for biomacromolecular compounds. By considering the interaction between the two, this paper briefly discussed the effect of these compounds on carotenoid water solubility, stability, and bioavailability, emphasizing their delivery effect on carotenoids. Finally, various challenges and future trends of lipid-biomacromolecular compounds as carotenoid delivery carriers were discussed, providing new insight into efficient loading and delivery of carotenoids.

Effect of ultrasound on the glycosylation reaction of pea protein isolate-arabinose: Structure and emulsifying properties

This study investigated the effects of different ultrasonic power and ultrasonic time on the structure and emulsifying properties of pea protein isolate (PPI)-arabinose conjugates. An examination of the absorbance and color development of PPI-d-arabinose (Ara) conjugates found that compared with traditional heating, the degree of glycosylation of protein reached the maximum when the ultrasonic treatment power was 150 and the treatment time was 30 min. Structural analysis revealed that the content of disordered structures (β-turn and random coil) of the protein conjugates increased, the maximum emission wavelength of the fluorescence spectrum was red-shifted, and the UV second-order derivative values decreased. The protein structure unfolded, exposing more hydrophobic groups on the molecular surface. Ultrasonic treatment improved the emulsification of protein conjugates. The emulsifying activity index (EAI) increased to 19.7 and 19.3 m²/g, and the emulsifying stability index (ESI) also increased. The contact angle and zeta potential also demonstrate that ultrasonic power has a positive effect on emulsion stability. Based on examining the thermal stability of the emulsion, the ultrasonic treatment increased the thermal denaturation resistance of the protein. This result confirms that mild sonication can increase the degree of glycosylation reaction and improve the emulsification properties of protein-Ara conjugates, providing a theoretical basis for developing foods with excellent emulsification properties.

Preparation of modified Jiuzao glutelin isolate with carboxymethyl chitosan by ultrasound-stirring assisted Maillard reaction and its protective effect of loading resveratrol/quercetin in nano-emulsion

Jiuzao glutelin isolate (JGI) was reported to possess interface and functional properties. To enhance the stability and properties of JGI, conjugation between JGI and carboxymethyl chitosan (CTS) through ultrasound-stirring assisted Maillard reaction (UTSA-MR) was investigated and optimized. The changes of molecular distribution, secondary structure, morphology, and amino acid composition of JGI were detected after conjugation with CTS. The solubility, foaming property and stability, viscosity, and thermal stability of four conjugates (CTS-JGI, with weight ratios of 0.5:1, 1:1, 2:1, and 4:1) were significantly increased compared to native JGI. Under the optimal glycation, the conjugate (CTS/JGI, 2:1, w/w; CTS-JGI-2) exhibited the best emulsifying ability and stability against NaCl solution, in vitro antioxidant activity, and cholesterol-lowering ability. CTS-JGI-2 stabilized oil-in-water nano-emulsion improved resveratrol (RES) and quercetin (QUE) encapsulation efficiency (80.96% for RES and 93.13% for QUE) and stability during the simulated digestion process (73.23% for RES and 77.94% for QUE) due to the connection through hydrogen bonds, pi-anion, pi-sigma, and donors between CTS-JGI and RES/QUE. Taken together, the modification of JGI by conjugating with CTS through UTSA-MR could be an excellent method to improve the functional properties of JGI. CTS-JGI-2 is a potential conjugate with functions that can be used to encapsulate functional substances in the stabilized nano-emulsion.

The Effect of Glycosylated Soy Protein Isolate on the Stability of Lutein and Their Interaction Characteristics

Lutein is a natural fat-soluble carotenoid with various physiological functions. However, its poor water solubility and stability restrict its application in functional foods. The present study sought to analyze the stability and interaction mechanism of the complex glycosylated soy protein isolate (SPI) prepared using SPI and inulin-type fructans and lutein. The results showed that glycosylation reduced the fluorescence intensity and surface hydrophobicity of SPI but improved the emulsification process and solubility. Fluorescence intensity and ultraviolet–visible (UV–Vis) absorption spectroscopy results showed that the fluorescence quenching of the glycosylated soybean protein isolate by lutein was static. Through thermodynamic parameter analysis, it was found that lutein and glycosylated SPI were bound spontaneously through hydrophobic interaction, and the binding stoichiometry was 1:1. The X-ray diffraction analysis results showed that lutein existed in the glycosylated soybean protein isolate in an amorphous form. The Fourier transform infrared spectroscopy analysis results revealed that lutein had no effect on the secondary structure of glycosylated soy protein isolate. Meanwhile, the combination of lutein and glycosylated SPI improved the water solubility of lutein and the stability of light and heat.

Seed gum-based delivery systems and their application in encapsulation of bioactive molecules

Now-a-days, the food/pharma realm faces with great challenges for the application of bioactive molecules when applying them in free form due to their instability in vitro/in vivo. For promoting the biological and functional properties of bioactive molecules, efficient delivery systems have played a pivotal role offering a controlled delivery and improved bioavailability/solubility of bioactives. Among different carbohydrate-based delivery systems, seed gum-based vehicles (SGVs) have shown great promise, facilitating the delivery of a high concentration of bioactive at the site of action, a controlled payload release, and less bioactive loss. SGVs are potent structures to promote the bioavailability, beneficial properties, and in vitro/in vivo stability of bioactive components. Here, we offer a comprehensive overview of seed gum-based nano- and microdevices as delivery systems for bioactive molecules. We have a focus on structural/functional attributes and health-promoting benefits of seed gums, but also strategies involving modification of these biopolymers are included. Diverse SGVs (nano/microparticles, functional films, hydrogels/nanogels, particles for Pickering nanoemulsions, multilayer carriers, emulsions, and complexes/conjugates) are reviewed and important parameters for bioactive delivery are highlighted (e.g. bioactive-loading capacity, control of bioactive release, (bio)stability, and so on). Future challenges for these biopolymer-based carriers have also been discussed. HighlightsSeed gum-based polymers are promising materials to design different bioactive delivery systems.Seed gum-based delivery systems are particles, fibers, complexes, conjugates, hydrogels, etc.Seed gum-based vehicles are potent structures to promote the bioavailability, beneficial properties, and in vitro/in vivo stability of bioactive components.

Recent advances in modified food proteins by high intensity ultrasound for enhancing functionality: Potential mechanisms, combination with other methods, equipment innovations and future directions

High intensity ultrasound (HIU) is an efficient and green technology that has recently received enormous research attention for modification of food proteins. However, there are still several knowledge gaps in the possible mechanisms, synergistic effects of HIU with other strategies and improvement of HIU equipment that contribute to its application in the food industry. This review focuses on the recent research progress on the effects and potential mechanisms of HIU on the structure (including secondary and tertiary structure) and functionality (including solubility, emulsibility, foamability, and gelability) of proteins. Furthermore, the combination methods and innovations of HIU equipment for proteins modification in recent years are also detailed. Meanwhile, the possible future trends of food proteins modification by HIU are also considered and proposed.

Glycated α-lactalbumin based micelles for quercetin delivery: Physicochemical stability and fate of simulated digestion

•

ALA-dextran conjugates were fabricated by Maillard reaction.

•

The conjugates had the high encapsulation efficiency on loading quercetin.

•

The micelles showed excellent pH, ionic strength and photothermal stability.

•

The micelles exhibited sustained release of quercetin by the resistance to enzymes.

•

The excellent stability made the conjugates promising materials for oral delivery.

Glycated protein is a kind of promising material that can improve the bioavailability of bioactive compounds and achieve sustained release under digestion. In this study, the α-lactalbumin (ALA)-dextran conjugates synthesized by Maillard reaction were fabricated to load and protect quercetin. Quercetin-loaded micelles stabilized by the ALA-dextran conjugates 1:4 showed the smallest size (428.57 ± 5.64 nm) with highest encapsulation efficiency (94.38% ± 0.50%) of quercetin. Compared to ALA/dextran mixture complex, the conjugates-based micelles had better pH, ionic strength and photothermal stability. Furthermore, the micelles composed of the conjugates 1:2 and 1:4 showed the best controlled release effect during the simulated digestion, releasing 62.41% and 66.15% of quercetin from the total encapsulated contents, respectively, which was mainly related to the resistance of glycated ALA to the enzymes. The findings indicated that ALA-dextran conjugates could be effectively designed for the ideal delivery system of hydrophobic bioactive compounds in food industry.