Facilitating high pressure phase-transition research and kinetics studies at subzero temperatures using self-cooling laboratory units

Novel high-strength, recyclable, microbial-resistant, and freeze-thaw dual topological network hydrogel cooling media

The demand for multifunctional hydrogels, offering high mechanical strength, efficient cooling, and antimicrobial properties, is growing in food preservation. Here, a dual-network (DN) hydrogel PM@Cur, which includes curcumin, is fabricated through chemical crosslinking and hydrogen bonding interactions. The resulting hydrogels can withstand more than five freeze-thaw cycles at -80 °C, and resist brittleness after liquid nitrogen treatment. PM@Cur also exhibits surface hydrophobicity (contact angle >90°) for both water and organic solvents. These properties meet the mechanical, anti-fouling, and recyclable demands for hydrogel coolants. The antimicrobial assays in vitro confirmed that the inclusion of curcumin provided the PM@Cur with photodynamic antimicrobial capacity. Finally, the prepared PM@Cur hydrogel ice cubes have been confirmed to exhibit better anti-melting properties than traditional ice cubes, thus enabling the preservation of strawberries and shrimp. This study presents an innovative solution for producing advanced functional integrated hydrogels, offering a promising and safer option for food coolants.\.

The influence of pressure-shift freezing based on the supercooling and pressure parameters on the freshwater surimi gel characteristics

In this study, the phase transition curve of grass carp surimi gel in the ice I region was mapped and fitted. Additionally, the average adiabatic compressibility of surimi gel was calculated to be 2.7℃/100 MPa in the range of 0-320 MPa. Building upon this, the study further investigated the impact of pressure-shift freezing (PSF) treatment based on supercooling and pressure coupling on the gel strength, texture profile analysis (TPA), and water-holding capacity of surimi gel. Compared with the low level of supercooling (supercooling value > -15℃) treatment, the PSF treatment with a higher supercooling degree (supercooling value ≤ -15℃) could enhance the strength and water-holding capacity of surimi gel. The morphology and distribution of ice crystals suggested that the diameter and size distribution of ice crystals in the sample were dependent on the combination of pressure level and supercooling. The combination of precise control of supercooling and pressure parameters is beneficial in improving the mechanical properties and water-holding capacity of surimi gel. This is of great value for developing high-quality surimi gel products and also offers a new research thread in the realm of high-pressure freezing.

Regulation of the Ice Ⅰ to Ice III high pressure phase transition meta-stability in milk and its bactericidal effects

This study was focused on a novel approach of creating perturbations under high pressure (HP) meta-stable Ice Ⅰ to Ice Ⅲ phase transition and its bactericidal effects. Experiments were carried out under subzero high pressure processing conditions using Escherichia coli suspended in milk, and the microbial inactivation before and after the meta-stable state regulation was compared. The phase transition position of unperturbed milk was 302 MPa/-37.5 °C. The volume change resulting from the phase transition was employed as the perturbation mechanism. Glucose (5 %, 20 %) and sodium chloride solutions (5 %, 20 %) were used as regulatory sources. Glucose solutions accelerated the phase change of the milk better than the sodium chloride solution and resulted in an optimum phase transition position of milk at 243 MPa/-30.6 °C. The induced perturbations accelerated meta-stable transformation and enhanced the microbial destruction. At 330 MPa/3s, compared to the unfrozen samples, the lethality of E. coli in the frozen-regulated samples significantly increased by 1.79 log. The relationship between the E. coli inactivation within the phase change pressure range and the pressure was not continuous, but a segmented one, both before and after meta-stable state regulation. A higher level of E. coli destruction was accomplished by a 5 min pressure-holding of frozen samples at 220 MPa and 280 MPa as compared to the one-pulse and two-pulses treatments without holding time. The maximum lethality of 6.73 log was achieved at 280 MPa/5 min in the frozen-regulated application.

Facilitation of metastable ice Ⅰ - ice III phase transition of liquid foods at high-pressure sub-zero temperature by perturbation

In this study, the distribution of ice Ⅰ - ice III phase transition positions and its influencing factors on various fruit juices and food model solutions under high pressure (HP) were investigated. In addition, the effect of perturbation on induction of phase change in metastable apple juice was also explored. The phase transition positions of fruit juice samples deviated far from the theoretical value (210 MPa/ -21 °C), with pressure in range of 268 ∼ 305 MPa and temperature between -31.09 °C and -37.21 °C, with the most extreme phase transition position of 305 MPa/ -37.21 °C for apple juice. The phase change position was affected by the type of solution but not by the concentration of solutions. The cooling media namely, sodium chloride (5%, 20%) and glucose solution (5%, 20%) were used as perturbation sources to stimulate the metastable apple juice by using instantaneous volume reduction during the ice Ⅰ - ice III phase transition. They successfully promoted the phase transition of apple juice, where 20% sodium chloride solution significantly (p < 0.05) reduced the phase change pressure of apple juice to 239 MPa. The perturbation effect was influenced by the type and concentration of the perturbation source, the composition of the cavity area and the softness of the sample container.

The Effect of Pressure-Shift Freezing versus Air Freezing and Liquid Immersion on the Quality of Frozen Fish during Storage

In this study, a self-cooling laboratory system was used for pressure−shift freezing (PSF), and the effects of pressure−shift freezing (PSF) at 150 MPa on the quality of largemouth bass (Micropterus salmoides) during frozen storage at −30 °C were evaluated and compared with those of conventional air freezing (CAF) and liquid immersion freezing (LIF). The evaluated thawing loss and cooking loss of PSF were significantly lower than those of CAF and LIF during the whole frozen storage period. The thawing loss, L* value, b* value and TBARS of the frozen fish increased during the storage. After 28 days storage, the TBARS values of LIF and CAF were 0.54 and 0.65, respectively, significantly higher (p < 0.05) than the 0.25 observed for PSF. The pH of the samples showed a decreasing trend at first but then increased during the storage, and the CAF had the fastest increasing trend. Based on Raman spectra, the secondary structure of the protein in the PSF-treated samples was considered more stable. The α-helix content of the protein in the unfrozen sample was 59.3 ± 7.22, which decreased after 28 days of frozen storage for PSF, LIF and CAF to 48.5 ± 3.43, 39.1 ± 2.35 and 33.4 ± 4.21, respectively. The results showed that the quality of largemouth bass treated with PSF was better than LIT and CAF during the frozen storage.

Frozen-Phase High-Pressure Destruction Kinetics of Escherichia coli as Influenced by Application Mode, Substrate, and Enrichment Medium

The synergistic effect of frozen-phase high pressure (HP) on the inactivation of E. coli ATCC 25922 cultures in suspension medium, Chinese bayberry juice (pH 3.0), and carrot juice (pH 6.5) was evaluated. The survivor count of E. coli remained at 3.36 log CFU/mL on a nonselective brain heart infusion (BHIA) medium, while no survivor was detected on a selective violet red bile agar (VRBA) medium after a 5 min hold pressure at 250 MPa in a frozen culture suspension. BHIA was suitable for safe testing of the injured E coli cells after HP treatment in frozen state. Frozen Chinese bayberry juice showed higher sensitivity to HP treatment for its matrix property with high sterilizing efficiency at 170 MPa. Two pulses exhibited a significant inactivation effect in frozen samples compared with one pulse, especially for the Chinese bayberry juice with different pressure levels. The destruction kinetics of HP pulse mode followed the first-order rate kinetics with a Zp value of 267 MPa in frozen carrot juice. Our results evaluated the influenced factors of frozen HP destruction effects, including the medium, substrate, and application mode. The frozen HP destruction kinetics of pulses afford us better understanding of the technology application in the food industry.

Demonstration of Escherichia coli Inactivation in Sterile Physiological Saline under High Pressure (HP) Phase Transition Conditions and Analysis of Probable Contribution of HP Metastable Positions Using Model Solutions and Apple Juice

It was demonstrated that the inactivation of high pressure (HP) treatment on Escherichia coli survival in sterile physiological saline (SPS) was influenced by the treatment conditions: unfrozen, frozen-thawed and fully frozen (phase transition). In order to probe the enhanced phase transition microbial destruction, vibration effects of phase transition position were created and discussed. Test samples were placed in HP chamber for treatment (150/240/330 MPa, no holding time) at room temperature and a special cooling device was used to maintain the phase transition conditions. Results showed that the phase transition from ice I to ice III of frozen SPS could be realized based on the cooling of a 20% sodium chloride solution. HP treatment under fully frozen conditions produced the best lethal effect compared to unfrozen and freeze-thaw samples. Vibration tests were carried out by using model solutions and apple juice to explore the behavior of phase transition. A synchronous and advance phase transition of internal apple juice was realized, respectively, by using pure water and 5% sodium chloride solution as external vibration sources, and the advance phase transitions of external pure water were realized by using 5% sodium chloride solution and 5% glucose solution as internal vibration sources.