Adhesion and kinetics of biofilm formation and related gene expression of Listeria monocytogenes in response to nutritional stress

Biofilm formation by Listeria monocytogenes from the meat processing industry environment and the use of different combinations of detergents, sanitizers, and UV-A radiation to control this microorganism in planktonic and sessile forms

This study aimed to evaluate the ability of biofilm formation by L. monocytogenes from the meat processing industry environment, as well as the use of different combinations of detergents, sanitizers, and UV-A radiation in the control of this microorganism in the planktonic and sessile forms. Four L. monocytogenes isolates were evaluated and showed moderate ability to form biofilm, as well as carried genes related to biofilm production (agrB, agrD, prfA, actA, cheA, cheY, flaA, sigB), and genes related to tolerance to sanitizers (lde and qacH). The biofilm-forming isolates of L. monocytogenes were susceptible to quaternary ammonium compound (QAC) and peracetic acid (PA) in planktonic form, with minimum inhibitory concentrations of 125 and 75 ppm, respectively, for contact times of 10 and 5 min. These concentrations are lower than those recommended by the manufacturers, which are at least 200 and 300 ppm for QAC and PA, respectively. Biofilms of L. monocytogenes formed from a pool of isolates on stainless steel and polyurethane coupons were subjected to 14 treatments involving acid and enzymatic detergents, QAC and PA sanitizers, and UV-A radiation at varying concentrations and contact times. All treatments reduced L. monocytogenes counts in the biofilm, indicating that the tested detergents, sanitizers, and UV-A radiation exhibited antimicrobial activity against biofilms on both surface types. Notably, the biofilm formed on polyurethane showed greater tolerance to the evaluated compounds than the biofilm on stainless steel, likely due to the material's surface facilitating faster microbial colonization and the development of a more complex structure, as observed by scanning electron microscopy. Listeria monocytogenes isolates from the meat processing industry carry genes associated with biofilm production and can form biofilms on both stainless steel and polyurethane surfaces, which may contribute to their persistence within meat processing lines. Despite carrying sanitizer tolerance genes, QAC and PA effectively controlled these microorganisms in their planktonic form. However, combinations of detergent (AC and ENZ) with sanitizers (QAC and PA) at minimum concentrations of 125 ppm and 300 ppm, respectively, were the most effective.

Growth, biofilm formation, and motility of Listeria monocytogenes strains isolated from food and clinical samples located in Shanghai (China)

Listeria monocytogenes is a common foodborne pathogen that frequently causes global outbreaks. In this study, the growth characteristics, biofilm formation ability, motility ability and whole genome of 26 L. monocytogenes strains isolated from food and clinical samples in Shanghai (China) from 2020 to 2022 were analyzed. There are significant differences among isolates in terms of growth, biofilm formation, motility, and gene expression. Compared with other sequence type (ST) types, ST1930 type exhibited a significantly higher maximum growth rate, the ST8 type demonstrated a stronger biofilm formation ability, and the ST121 type displayed greater motility ability. Furthermore, ST121 exhibited significantly high mRNA expression levels compared with other ST types in virulence genes mpl, fbpA and fbpB, the quorum sensing gene luxS, starvation response regulation gene relA, and biofilm adhesion related gene bapL. Whole-genome sequencing (WGS) analyses indicated the isolates of lineage I were mostly derived from clinical, and the isolates of lineage II were mostly derived from food. The motility ability, along with the expression of genes associated with motility (motA and motB), exhibited a significantly higher level in lineage II compared with lineage I. The isolates from food exhibited significantly higher motility ability compared with isolates from clinical. By integrating growth, biofilm formation, motility phenotype with molecular and genotyping information, it is possible to enhance comprehension of the association between genes associated with these characteristics in L. monocytogenes.

The ARIMA model approach for the biofilm-forming capacity prediction of Listeria monocytogenes recovered from carcasses

The present study aimed to predict the biofilm-formation ability of L. monocytogenes isolates obtained from cattle carcasses via the ARIMA model at different temperature parameters. The identification of L. monocytogenes obtained from carcass samples collected from slaughterhouses was determined by PCR. The biofilm-forming abilities of isolates were phenotypically determined by calculating the OD value and categorizing the ability via the microplate test. The presence of some virulence genes related to biofilm was revealed by QPCR to support the biofilm profile genotypically. Biofilm-formation of the isolates was evaluated at different temperature parameters (37 °C, 22 °C, 4 °C and - 20 °C). Estimated OD values were obtained with the ARIMA model by dividing them into eight different estimation groups. The prediction performance was determined by performance measurement metrics (ME, MAE, MSE, RMSE, MPE and MAPE). One week of incubation showed all isolates strongly formed biofilm at all controlled temperatures except - 20 °C. In terms of the metrics examined, the 3 days to 7 days forecast group has a reasonable prediction accuracy based on OD values occurring at 37 °C, 22 °C, and 4 °C. It was concluded that measurements at 22 °C had lower prediction accuracy compared to predictions from other temperatures. Overall, the best OD prediction accuracy belonged to the data obtained from biofilm formation at -20 °C. For all temperatures studied, especially after the 3 days to 7 days forecast group, there was a significant decrease in the error metrics and the forecast accuracy increased. When evaluating the best prediction group, the lowest RMSE at 37 °C (0.055), 22 °C (0.027) and 4 °C (0.024) belonged to the 15 days to 21 days group. For the OD predictions obtained at -20 °C, the 15 days to 21 days prediction group had also good performance (0.011) and the lowest RMSE belongs to the 7 days to 15 days group (0.007). In conclusion, this study will guide in using indicator parameters to evaluate biofilm forming ability to predict optimum temperature-time. The ARIMA models integrated with this study can be useful tools for industrial application and risk assessment studies using different parameters such as pH, NaCl concentration, and especially temperature applied during food processing and storage on the biofilm-formation ability of L. monocytogenes.

Recent advances on the formation, detection, resistance mechanism, and control technology of Listeria monocytogenes biofilm in food industry

Listeria monocytogenes is an important foodborne pathogen that causes listeriosis, a severe and fatal condition. Biofilms are communities of microorganisms nested within a self-secreted extracellular polymeric substance, and they protect L. monocytogenes from environmental stresses. Biofilms, once formed, can lead to the persistence of L. monocytogenes in processing equipment and are therefore considered to be a major concern for the food industry. This paper briefly introduces the recent advancements on biofilm formation characteristics and detection methods, and focuses on analysis of the mechanism of L. monocytogenes biofilm resistance; Moreover, this paper also summarizes and discusses the existing different techniques of L. monocytogenes biofilm control according to the physical, chemical, biological, and combined strategies, to provide a theoretical reference to aid the choice of effective control technology in the food industry.

Effects of Sub-Minimum Inhibitory Concentrations of Bacteriocin BM173 on Listeria Monocytogenes Biofilm Formation

Listeria monocytogenes is a significant foodborne pathogen that can form biofilms on various food processing surfaces, thereby enhancing resistance to disinfectants and exacerbating harm to human health. Previous studies have indicated that bacteriocin BM173 exhibits antibacterial and antibiofilm activities. In the current study, our aim was to assess the inhibitory mode of action of sub-inhibitory concentrations (SICs, 1/32 × MIC and 1/16 × MIC) of BM173 on the biofilm formation L. monocytogenes. Crystal violet staining assay revealed that SICs of BM173 significantly inhibit L. monocytogenes biofilm formation. Furthermore, the results of swimming motility assay, plate count, ruthenium red staining, and scanning electron microscopy (SEM) revealed that SICs of BM173 could effectively reduce the movement, cell adhesion, and exopolysaccharide (EPS) production of L. monocytogenes, thereby inhibiting biofilm formation. Real-time quantitative PCR analyses further demonstrated that SICs of BM173 down-regulated the expression of biofilm-associated genes, including those encoding adhesion, virulence factors, and quorum sensing. Additionally, SICs of BM173 effectively reduced the biofilm formation of L. monocytogenes on the surfaces of three food-grade materials (glass, stainless steel, and silicone) at 4 and 25 °C. These outcomes suggest that BM173 holds great potential for development as a promising food preservative for application in the food industry.

Comparison of the efficacy of physical and chemical strategies for the inactivation of biofilm cells of foodborne pathogens

Biofilm formation is a strategy in which microorganisms generate a matrix of extracellular polymeric substances to increase survival under harsh conditions. The efficacy of sanitization processes is lowered when biofilms form, in particular on industrial devices. While various traditional and emerging technologies have been explored for the eradication of biofilms, cell resistance under a range of environmental conditions renders evaluation of the efficacy of control challenging. This review aimed to: (1) classify biofilm control measures into chemical, physical, and combination methods, (2) discuss mechanisms underlying inactivation by each method, and (3) summarize the reduction of biofilm cells after each treatment. The review is expected to be useful for future experimental studies and help to guide the establishment of biofilm control strategies in the food industry.

Multiomics reveals the mechanism of B. longum in promoting the formation of mixed-species biofilms

It has been found previously that Bifidobacterium longum, Bacteroides ovatus, Enterococcus faecalis, and Lactobacillus gasseri can form a biofilm better when co-cultured in vitro and B. longum is the core biofilm-formation-promoting strain in this community. B. longum is part of the core microbiota in the gut and is widely recognized as a probiotic. Therefore, it is necessary to explore its role in mixed-species biofilms through transcriptomics and metabolomics. Metabolomics showed that the increase in amino acid and purine content could promote biofilm formation. In transcriptomic analysis, many genes related to carbohydrate metabolism, amino acid metabolism, and environmental tolerance of B. longum were up-regulated. Combined with the Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analysis and Gene Ontology (GO) analysis, the differentially expressed genes (DEGs) of B. longum in mixed-species biofilms were mainly correlated to "quorum sensing (QS)", "ABC transporters", "biosynthesis of amino acids", "microbial metabolism in different environments", "carbohydrate metabolism" and "two-component system". In addition, the rpl and rps gene families, which function in the metabolism of organic substances and the biosynthesis of amino acids, were the core DEGs according to the analysis of the protein-protein interaction (PPI) network. Finally, by combining metabolomics and quorum sensing mechanisms, it was found that the metabolism of autoinducer peptides (proliylglycine and glycylleucine), N-acyl homoserine lactone (N-(3-oxo hydroxy) homoserine lactone), and AI-2 can promote the formation of biofilms, both mono- and mixed-species biofilms composed of B. longum. Our research enabled us to understand the critical role of B. longum in mixed-species biofilms and the interactions between biofilm metabolism and gut health. In addition, the generated knowledge will be of great significance for us to develop biofilm products with beneficial functions in future.

What's in a name? Characteristics of clinical biofilms

In vitro biofilms are communities of microbes with unique features compared to individual cells. Biofilms are commonly characterized by physical traits like size, adhesion, and a matrix made of extracellular substances. They display distinct phenotypic features, such as metabolic activity and antibiotic tolerance. However, the relative importance of these traits depends on the environment and bacterial species. Various mechanisms enable biofilm-associated bacteria to withstand antibiotics, including physical barriers, physiological adaptations, and changes in gene expression. Gene expression profiles in biofilms differ from individual cells but, there is little consensus among studies and so far, a 'biofilm signature transcriptome' has not been recognized. Additionally, the spatial and temporal variability within biofilms varies greatly depending on the system or environment. Despite all these variable conditions, which produce very diverse structures, they are all noted as biofilms. We discuss that clinical biofilms may differ from those grown in laboratories and found in the environment and discuss whether the characteristics that are commonly used to define and characterize biofilms have been shown in infectious biofilms. We emphasize that there is a need for a comprehensive understanding of the specific traits that are used to define bacteria in infections as clinical biofilms.

Attachment characteristics and kinetics of biofilm formation by Staphylococcus aureus on ready-to-eat cooked beef contact surfaces

Staphylococcus aureus is a food-borne pathogen that quickly forms biofilm on meat contact surfaces and thus poses a serious threat to the safety of the meat industry. This study evaluated the attachment, survival, and growth of S. aureus biofilm with exposure to environmental factors in the meat industry by simulated ready-to-eat (RTE) cooked beef product contamination scenarios. The results indicated that the meat-borne S. aureus biofilm formation dynamic could be divided into four different phases: initial adhesion (4-12 h), exponential (12-24 h), slow growth (1-3 days), and stationary (3-7 days). Meat-borne S. aureus has strong adhesion and biofilm formation ability, and its biofilm exhibits persistence, high-intensity metabolic activity, aerotaxis, and strain heterogeneity. This study has also demonstrated that in the long-term existence of meat-borne S. aureus biofilm on stainless steel and plexiglass surfaces (>7 days, 7.2-8.8 log CFU/cm² ), expose to RTE cooked beef products, may cause it to become high-risk contaminated food. Meat-borne S. aureus that forms a dense and rough concave-convex in the shape of biofilm architecture was observed by scanning electron microscopy, consisting of complex components and adhesion of living and dead cells. This was further confirmed by the meat-borne S. aureus biofilm on the stainless steel surface by attenuated total reflectance Fourier transformed infrared spectroscopy, and the dominant peaks in biofilm spectra were mainly associated with proteins, polysaccharides, amino acid residues, and phospholipids (>50%). These findings may help in the identification of the main sources of contamination within the meat industry and the subsequent establishment of strategies for biofilm prevention and removal. PRACTICAL APPLICATION: This study revealed the meat-borne S. aureus biofilm formation mechanism and found that it exhibited strong colonization and biofilm-forming ability, which can persist on the contact surfaces of ready-to-eat beef products. These initial findings could provide information on the behavior of meat-borne S. aureus biofilm attached to meat contact surfaces under conditions commonly encountered in meat environments, which help to support the determination of the main sources of contamination within the meat industry and the subsequent establishment of strategies for biofilm prevention and removal. It was also helpful in controlling biofilm contamination and improving meat safety to minimize it.

Different cellular fatty acid pattern and gene expression of planktonic and biofilm state Listeria monocytogenes under nutritional stress

Listeria monocytogenes is a Gram-positive bacterium frequently involved in food-borne disease outbreaks and is widely distributed in the food-processing environment. This work aims to depict the impact of nutrition deficiency on the survival strategy of L. monocytogenes both in planktonic and biofilm states. In the present study, cell characteristics (autoaggression, hydrophobicity and motility), membrane fatty acid composition of MRL300083 (Lm83) in the forms of planktonic and biofilm-associated cells cultured in TSB-YE and 10-fold dilutions of TSB-YE (DTSB-YE) were investigated. Additionally, the relative expression of related genes were also determined by RT-qPCR. It was observed that cell growth in different bacterial life modes under nutritional stress rendered the cells a distinct phenotype. The higher autoaggression (AAG) and motility of the planktonic cells in DTSB-YE is associated with better biofilm formation. An increased proportion of unsaturated fatty acid/saturated fatty acid (USFA/SFA) indicates more fluidic biophysical properties for cell membranes of L. monocytogenes in planktonic and biofilm cells in DTSB-YE. Biofilm cells produced a higher percentage of USFA and straight fatty acids than the corresponding planktonic cells. An appropriate degree of membrane fluidity is crucial for survival, and alteration of membrane lipids is an essential adaptive response. The adaptation of bacteria to stress is a multifactorial cellular process, the expression of flagella-related genes fliG, fliP, flgE and the two-component chemotactic system cheA/Y genes of planktonic cells in DTSB-YE significantly increased compared to that in TSB-YE (p < 0.05). This study provides new information on the role of the physiological adaptation and gene expression of L. monocytogenes for planktonic and biofilm growth under nutritional stress.

Marked inter-strain heterogeneity in the differential expression of some key stress response and virulence-related genes between planktonic and biofilm cells in Listeria monocytogenes

Listeria monocytogenes is a facultatively intracellular pathogenic bacterium that can provoke invasive listeriosis, a severe foodborne infection in humans. Outside the host, this is capable to survive for long periods in soil, and water, as well as on plants, while, like many other microorganisms, this can also attach to abiotic surfaces, such as food contact ones, forming biofilms on them. It has been suggested that inside those sessile communities, L. monocytogenes cells not only display an increased stress tolerance but may also boost their pathogenicity. In this work, the expression of ten key stress response and/or virulence-related genes (i.e., groEL, hly, iap, inlA, inlB, lisK, mdrD, mdrL, prfA, and sigB) was studied in three different L. monocytogenes strains (AAL20066, AAL20107, and PL24), all isolated from foods and each belonging to a different listeriosis-associated serovar (1/2a, 1/2b, and 1/2c, respectively). For this, each strain was initially left to develop a mature biofilm on a model polystyrene surface (Petri dish) by incubating for 144 h (6 days) at 20 °C in tryptone soya broth (with medium renewal every 48 h). Following incubation, both biofilm and the surrounding free-swimming (planktonic) cells were recovered, and their gene expressions were comparatively evaluated through targeted reverse transcription-quantitative polymerase chain reactions (RT-qPCR). Results revealed a strain-dependent differential gene expression between the two cell types. Thus, for instance, in strain AAL20107 (ser. 1/2b) biofilm growth worryingly resulted in a significant overexpression of all the studied genes (P < 0.05), whereas in strain PL24 (ser. 1/2c), the expression of most genes (8/10) did not change upon biofilm growth, with only two of them (groEL and hly) being again significantly upregulated. Such transcriptomic strain variability in stress adaptation and/or virulence induction should be generally considered in the physiological studies of pathogenic biofilms and preferably upon designing and implementing novel and more efficient eradication methods.

Dry surface biofilms in the food processing industry: An overview on surface characteristics, adhesion and biofilm formation, detection of biofilms, and dry sanitization methods

Bacterial biofilm formation in low moisture food processing (LMF) plants is related to matters of food safety, production efficiency, economic loss, and reduced consumer trust. Dry surfaces may appear dry to the naked eye, however, it is common to find a coverage of thin liquid films and microdroplets, known as microscopic surface wetness (MSW). The MSW may favor dry surface biofilm (DSB) formation. DSB formation is similar in other industries, it occurs through the processes of adhesion, production of extracellular polymeric substances, development of microcolonies and maturation, it is mediated by a quorum sensing (QS) system and is followed by dispersal, leading to disaggregation. Species that survive on dry surfaces develop tolerance to different stresses. DSB are recalcitrant and contribute to higher resistance to sanitation, becoming potential sources of contamination, related to the spoilage of processed products and foodborne disease outbreaks. In LMF industries, sanitization is performed using physical methods without the presence of water. Although alternative dry sanitizing methods can be efficiently used, additional studies are still required to develop and assess the effect of emerging technologies, and to propose possible combinations with traditional methods to enhance their effects on the sanitization process. Overall, more information about the different technologies can help to find the most appropriate method/s, contributing to the development of new sanitization protocols. Thus, this review aimed to identify the main characteristics and challenges of biofilm management in low moisture food industries, and summarizes the mechanisms of action of different dry sanitizing methods (alcohol, hot air, UV-C light, pulsed light, gaseous ozone, and cold plasma) and their effects on microbial metabolism.

Effect of nutrients deficiency on biofilm formation and single cell protein production with a purple non-sulphur bacteria enriched culture

Purple non-sulphur bacteria (PNSB) are of interest for biorefinery applications to create biomolecules, but their production cost is expensive due to substrate and biomass separation costs. This research has utilized fuel synthesis wastewater (FSW) as a low-cost carbon-rich substrate to produce single-cell protein (SCP) and examines PNSB biofilm formation using this substrate to achieve a more efficient biomass-liquid separation. In this study, PNSB were grown in Ca, Mg, S, P, and N-deficient media using green shade as biofilm support material. Among these nutrient conditions, only N-deficient and control (nutrient-sufficient) conditions showed biofilm formation. Although total biomass growth of the control was 1.5 times that of the N-deficient condition and highest overall, the total biofilm-biomass in the N-deficient condition was 2.5 times greater than the control, comprising 49% of total biomass produced. Total protein content was similar between these four biomass samples, ranging from 35.0 ± 0.2% to 37.2 ± 0.0%. The highest protein content of 44.7 ± 1.3% occurred in the Mg-deficient condition (suspended biomass only) but suffered from a low growth rate. Overall, nutrient sufficient conditions are optimal for overall protein productivity and dominated by suspended growth, but where fixed growth systems are desired for cost-effective harvesting, N-deficient conditions provide an effective means to maximize biofilm production without sacrificing protein content.

Electrochemical Control of Biofilm Formation and Approaches to Biofilm Removal

This review deals with microbial adhesion to metal-based surfaces and the subsequent biofilm formation, showing that both processes are a serious problem in the food industry, where pathogenic microorganisms released from the biofilm structure may pollute food and related material during their production. Biofilm exhibits an increased resistance toward sanitizers and disinfectants, which complicates the removal or inactivation of microorganisms in these products. In the existing traditional techniques and modern approaches for clean-in-place, electrochemical biofilm control offers promising technology, where surface properties or the reactions taking place on the surface are controlled to delay or prevent cell attachment or to remove microbial cells from the surface. In this overview, biofilm characterization, the classification of bacteria-forming biofilms, the influence of environmental conditions for bacterial attachment to material surfaces, and the evaluation of the role of biofilm morphology are described in detail. Health aspects, biofilm control methods in the food industry, and conventional approaches to biofilm removal are included as well, in order to consider the possibilities and limitations of various electrochemical approaches to biofilm control with respect to potential applications in the food industry.