Resveratrol inhibits lipid and protein co-oxidation in sodium caseinate-walnut oil emulsions by reinforcing oil-water interface

Young apple polyphenols confer excellent physical and oxidative stabilities to soy protein emulsions for effective β-carotene encapsulation and delivery

Protein emulsions' poor physical and oxidative stabilities restrict their use in functional foods. Soy protein isolate (SPI) emulsions' physical stability was enhanced by adding young apple polyphenols (YAP) in this study, but decreased when YAP was 0.12%. YAP binding prefolded SPI's structure, which promotes efficient SPI stacking at the interface. YAP also improved SPI emulsions' oxidation resistance in a dose-dependent manner. SPI-YAP interaction promoted more YAP adsorption (>80%) at the interface, which increased emulsions' antioxidant capacities twofold. Furthermore, over 90% of unsaturated fatty acids were preserved, and the oxidation of lipid-SPI-β-carotene appeared to be reduced as YAP increased. In addition, SPI-YAP emulsions were effective in encapsulating and safeguarding β-carotene during emulsion storage and in vitro digestion, leading to a delayed and maximum release of β-carotene. This study improves the understanding of polyphenols inhibition on lipid-protein oxidation through interface strengthening and broadens the potential applications of YAP and SPI in functional foods.

Zein and tannic acid hybrid particles improving physical stability, controlled release properties, and antimicrobial activity of cinnamon essential oil loaded Pickering emulsions

Pickering emulsion loading essential oil has demonstrated a promising strategy as delivery system in food preservation, but localization in stability and antimicrobial activity limits application. In this study, Pickering emulsions co-loaded with tannic acid and cinnamon essential oil (ZTC) have been developed based on zein and tannic acid complexes (ZT) mediated interfacial engineering. Fourier transform infrared, fluorescence spectroscopy, and molecular docking results indicated tannic acid altered the structural of zein. Interfacial tension results indicated that tannic acid accelerated the adsorbed speed of zein particles by decreased interfacial tension (11.99-9.96 mN/m). ZT5 formed a viscoelastic and dense layer in oil-water interface than that for other ZTs, which improved stability and control release performance of ZTC. Furthermore, the ZTC showed an effective antimicrobial activity against spoilage organisms Pseudomonad paralactis MN10 and Lactobacillus sakei VMR17. These findings provide new insight for developing co-loaded multiple antimicrobial agents within Pickering emulsion as a delivery system.

The Addition of Resveratrol-Loaded Emulsions to Yogurts: Physicochemical Characterization, In Vitro Bioaccessibility and NMR-Based Nutritional Profiles

In this study, resveratrol-loaded nano-emulsions were added to yogurts, improving the physicochemical properties and functional factors and realizing the development of nutrient-fortified yogurt. Yogurts added with free resveratrol (Y-R), resveratrol-loaded emulsions stabilized by sodium caseinate (Y-NN), decaglycerol monooleate (Y-DN), and sodium caseinate-decaglycerol monooleate (Y-DND) were evaluated for their physicochemical properties, including pH, titratable acidity, syneresis, and textural parameters, with 5-day intervals for 15-day storage. The resveratrol retention rate was analyzed in the Y-R, Y-NN, Y-DN, and Y-NDN groups during 15 days of storage. The dynamic bioaccessibility of resveratrol and the NMR-based nutritional profile of yogurt in the Y-R, Y-NN, Y-DN, and the Y-NDN group were investigated after in vitro digestion. The results demonstrated that the addition of resveratrol emulsion decreased the hardness of yogurt while evaluating its titratable acidity and water-holding capacity, which were characterized by high stability. The stability of resveratrol added in the form of an emulsion was significantly higher than that of the free form. Compared with the other groups, the yogurt formulated with sodium caseinate/decaglycerol monooleate (NaCas/DGMO) emulsion showed the highest resveratrol retention rate, about 70%. In vitro digestion showed that encapsulation effectively and persistently improved the dynamic bioaccessibility of resveratrol. Additionally, NMR-based nutritional profile analysis before and after in vitro digestion demonstrated that resveratrol emulsion nutritional fortification promoted the release of nutrients, improving the nutritional value of yogurt. These findings offered theoretical guidance and technical support for the use of resveratrol nano-emulsions in yogurt.

Effects of limited enzymatic hydrolysis and polysaccharide addition on the physicochemical properties of emulsions stabilized with duck myofibrillar protein under low-salt conditions

This study aimed to investigate the role of hydrolysis and guar gum (GG) participation on the emulsification of the duck myofibrillar protein (MP) and the related stability of oil-in-water emulsion in low-salt condition. Emulsions were prepared using one of each or both treatments, and that prepared with trypsin hydrolysis and GG (T-GG) exhibited the highest stability. FTIR analysis confirmed the hydrogen bond interactions between the system components. T-GG treatment improved emulsion properties and decreased oil droplet size. Moreover, CLSM indicated that aggregation of T-GG oil droplets was prevented. Physical stability was assessed such as Turbiscan stability index, creaming index, and rheological properties. The adsorbed percentage for T-GG was the lowest. However, interfacial tension, droplet size, stability, and peroxide value analyses indicated that a denser interfacial membrane structure is formed with T-GG. Thus, T-GG treatment could be applied in the food industry, such as in nutrient delivery systems and fat mimetics.

Effect of heat treatment on the physical stability, interfacial composition and protein-lipid co-oxidation of whey protein isolate-stabilised O/W emulsions

This work aimed to investigate the effects of heat treatments at different temperatures (60, 70 and 90 °C, expressed as HT-60, HT-70 and HT-90) on interfacial composition and protein-lipid co-oxidation in whey protein isolate (WPI)-stabilised O/W emulsions during storage. Compared with control group, all heated emulsions exhibited weaker physical stability over 10 days of storage, which verified by the increased droplet size, as well as decreased adsorbed protein levels and absolute ζ-potential values. Moreover, proteins recovered from the HT-90 emulsion showed the highest fluorescence intensity and red-shift of the maximum emission wavelength, indicating partial unfolding of the protein structure. Meanwhile, severe changes in protein structure were also observed in the HT-70 and HT-90 emulsions, which clearly verified by the degradation of bovine serum albumin, α-lactalbumin and β-lactoglobulin. Furthermore, HT-70 and HT-90 emulsions showed lower levels of lipid hydroperoxides and thiobarbituric acid reactive substances. In contrast, the recovered proteins were subject to severe oxidative stress as indicated by carbonyl and N'-formyl-L-kynurenine. Hierarchical cluster and correlation analysis implied that the process of protein-lipid co-oxidation is inevitable, but it can be retarded by heat treatment. Our results clearly revealed the relevance among heat treatment, interfacial adsorption property, and the protein-lipid co-oxidation of O/W emulsions.

Improved antioxidant properties of pork patties by replacing fat with resveratrol-loaded MP-CS complex stabilized pickering emulsion

The characterization and antioxidant ability of Res-loaded MP-CS stabilized Pickering emulsion, and its effects of fat reduction (25%, 50%, 75%, and 100%) in meat patties on pH, color, texture, cooking yield and antioxidant activity were investigated. Fat substitute using emulsion had no significant effect on pH and cooking yield. The addition of emulsion increased L* value and reduced a* value. a* value of meat patties with resveratrol added were higher than those without resveratrol group. Hardness and chewiness of meat patties with 25% and 100% fat replacement was lower than 50% and 75% fat replacement. The addition of emulsion could improve the network structure of meat patties and enhance oxidative stability. Oxidative stability of meat patties was improved by Res-loaded MP-CS stabilized Pickering emulsion. The results showed that MP-CS stabilized Pickering emulsion had great potential to be used as fat substitute for developing low-fat meat products, and the addition of resveratrol can improve the antioxidant ability of substitute fat meat products.

Study of nanoemulsions using carvacrol/MCT-(Oleic acid-potassium oleate)/ Tween 80 ®- water system by low energy method

Carvacrol is studied in different fields due to its microbial and antioxidant properties. Its use is limited because of the water insolubility and its strong taste. To overcome these problems, carvacrol has been successfully loaded into nanoemulsions. The low-energy emulsification method Phase Inversion Composition (PIC) is used to prepare oil-in-water nanoemulsions in the carvacrol/medium chain triglycerides (MCT)-(oleic acid-potassium oleate/Tween 80 ®)-water system. Oleic acid acts as a co-surfactant when it is neutralized with KOH along the emulsification path changing the spontaneous curvature of the interface when increasing the HLB number from 1 for the oleic acid to 20 for the potassium oleate and, therefore, changing the HLB number of the surfactant mixture. The phases diagrams are studied in order to understand the behaviour of the system and to establish the composition range where nanoemulsions can be obtained. Nanoemulsions are formed when the emulsification path crosses a region of direct or planar structure without excess of oil. Experimental design is performed in order to study the influence of composition variables as carvacrol/MCT ratio and (oleic-oleate)/Tween 80 ® ratio (OL-OT/T80 ratio) on the diameter of the nanoemulsions and their stability. It has been observed the importance of the HLB number of the surfactants mixture in order to obtain small-sized stable nanoemulsions. Surface response graphic shows that (OL-OT)/T80 ratio is a significant parameter in the mean diameter of the nanoemulsions. A minimum diameter is obtained for a (OL-OT)/T80 ratio 45/55 due to the fact that ratio is near the preferred HLB of the oil mixture and the emulsification path contains a wide liquid crystal monophasic region with all the oil incorporated in the structure. Diameters of 19 nm for carvacrol/MCT ratio of 30/70 or diameters of 30 nm for ratios of 45/55 with high stability values presented a good potential to be incorporated into edible films in the future. Regarding nanoemulsions stability an optimum value is also observed for a carvacrol/MCT ratio. The addition of another carrier oil as olive oil instead of MCT showed an improvement of the nanoemulsions stability against Ostwald ripening, probably due to the smaller solubility of olive oil. The use of olive oil does not significantly change the diameter of the nanoemulsion.

Encapsulation of Carvacrol-Loaded Nanoemulsion Obtained Using Phase Inversion Composition Method in Alginate Beads and Polysaccharide-Coated Alginate Beads

Nanoemulsions have been widely studied as lipophilic compound loading systems. A low-energy emulsification method, phase inversion composition (PIC), was used to prepare oil-in-water nanoemulsions in a carvacrol-coconut oil/Tween 80^®-(linoleic acid-potassium linoleate)/water system. The phase behaviour of several emulsification paths was studied and related to the composition range in which small-sized stable nanoemulsions could be obtained. An experimental design was carried out to determine the best formulation in terms of size and stability. Nanoemulsions with a very small mean droplet diameter (16-20 nm) were obtained and successfully encapsulated to add carvacrol to foods as a natural antimicrobial and antioxidant agent. They were encapsulated into alginate beads by external gelation. In order to improve the carvacrol kinetics release, the beads were coated with two different biopolymers: chitosan and pullulan. All formulations were analysed with scanning electron microscopy to investigate the surface morphology. The release patterns at different pHs were evaluated. Different kinetics release models were fitted in order to study the release mechanisms affecting each formulation. Chitosan-coated beads avoided the initial release burst effect, improving the beads' structure and producing a Fickian release. At basic pH, the chitosan-coated beads collapsed and the pullulan-coated beads moderately improved the release pattern of the alginate beads. For acid and neutral pHs, the chitosan-coated beads presented more sustained release patterns.

Fabrication of a novel antioxidant emulsifier through tuning the molecular interaction between soy protein isolates and young apple polyphenols

Soy protein isolates (SPI) exhibit weaker emulsifying properties than those of animal proteins, thereby limiting their wide applicability. In this study, a novel plant-based antioxidant emulsifier was developed using SPI and young apple polyphenols (YAP), and its underlying interaction mechanisms were discovered using multispectral technology and molecular docking. YAP physically bound to SPI through hydrogen bonds and hydrophobic interactions, which significantly enhanced the free radicals scavenging, reducing, and metal ion chelating abilities of SPI by introducing free hydroxyl groups. Moreover, SPI modified by YAP exerted better emulsifying performance owing to a looser protein structure, reflected by a higher random coil and a lower α-helix content. In addition, YAP may bridge adjacent SPI molecules, promoting the adsorption and anchoring of SPI at the oil-water interface. SPI-YAP complexes are promising antioxidant emulsifiers that can be used to nano-deliver functional oils and nutrients, thereby broadening SPI and YAP applications in the food industry.

Physicochemical and functional properties of RG-I enriched pectin extracted from thinned-young apples

The demand for obtaining pectin from new sources has been continuously increasing. The abundant but underutilized thinned-young apple is a potential source of pectin. In this study, an organic acid (i.e., citric acid) and two inorganic acids (i.e., hydrochloric acid and nitric acid) commonly used in commercial pectin production were applied to extract pectin from three varieties of thinned-young apples. The physicochemical and functional properties of the thinned-young apple pectin were comprehensively characterized. The highest pectin yield (8.88 %) was obtained from Fuji apple using citric acid extraction. All pectin was high methoxy pectin (HMP) and rich in RG-I regions (>56 %). The citric acid extracted pectin had the highest molecular weight (Mw) and lowest degree of esterification (DE) values, and exhibited great thermal stability and shear-thinning property. Furthermore, Fuji-apple pectin possessed significantly better emulsifying properties compared to pectin obtained from the other two varieties of apples. Thus, pectin extracted with citric acid from Fuji thinned-young apples has great potential to be applied in the food industry as a natural thickener and emulsifier.

Fabrication, Characterization, and Emulsifying Properties of Complex Based on Pea Protein Isolate / Pectin for the Encapsulation of Pterostilbene

In this study, pectin (PEC) and pea protein isolate(PPI) was successfully used to create complexes as a novel delivery system for pterostilbene (PT). When the mass ratio of PEC to PPI was 0.5, the particle size and ζ-potential of PPI-PEC-PT were 119.41 ± 5.68 nm and -23.26 ± 0.61 mV, respectively, and the encapsulation efficiency (EE) of PT was 90.92 ± 2.08%. The photochemical stability of PT was enhanced after encapsulation. The results of the molecular docking and multispectral analysis demonstrated that the PPI and PT binding was spontaneous and mostly fueled by hydrophobic interactions. The hydrophobicity of PPI was significantly decreased and the emulsification activity and emulsion stability were significantly improved after production with PEC and PT. The best emulsification impact was demonstrated by the PPI-PEC-PT complex. PPI-PEC is an effective PT delivery material, and the PPI-PEC-PT complex is a new functional emulsification material with significant potential in liquid and semi-liquid food and health products.

Effect of Oil Type on Spatial Partition of Resveratrol in the Aqueous Phase, the Protein Interface and the Oil Phase of O/W Emulsions Stabilized by Whey Protein and Caseinate

Oil-in-water emulsions contain the inner oil phase, the protein membrane at the interface and the aqueous phase. In this study, the spatial partition of resveratrol was investigated in sunflower oil, fish oil, medium-chain triglyceride (MCT) and peppermint oil emulsions stabilized by native whey protein isolate (WPI), heat-denatured WPI and sodium caseinate. Resveratrol was added in the aqueous phase of emulsions and its partition was analyzed in term of resveratrol solubility in bulk oil and in the aqueous phase of protein, protein concentration and interfacial protein. The final concentrations of resveratrol in the aqueous phase were basically greater than those in the oil phase of fish oil, sunflower oil and MCT oil emulsions, while the final concentrations of resveratrol in the oil phase were greater than those in the aqueous phase of peppermint oil emulsions. The difference in the interfacial partition of resveratrol and proteins increased as the polyphenol solubility in bulk oil increased. Resveratrol solubility in the oil phase drove its transfer from the aqueous phase into the oil phase in all emulsions, except that the interfacial protein also contributed to the transfer in fish oil emulsions. The oil–water interface provided the microenvironment for the enrichment of resveratrol by proteins.

The Effects of Malonaldehyde on Quality Characteristics and Protein Oxidation of Coregonus peled (Coregonuspeled) during Storage

The effects of changes in the malondialdehyde (MDA) content on the quality of fish during the low-temperature storage period are unclear. Therefore, the effects of the MDA content on Coregonus peled quality and protein changes were investigated following storage under refrigeration (4 °C) and super chilling (-3 °C) for 15 days (d). The results showed that the MDA content continued to increase during storage and that the highest content was produced at 1.42 mg/kg during refrigeration. The fillet pH, drip loss, texture (hardness and elasticity), and myofibril fragmentation index deteriorated significantly during the storage period. Increased oxidation of the myofibrillar protein (MP) was observed in the 15 d storage period, and the MP carbonyl content was 1.19 times higher under refrigeration than in super chilling, while the protein α-helix structure decreased by 12.48% and 12.20% under refrigeration and super chilling, respectively. Electropherograms also showed that myosin degradation was particularly severe in the refrigeration storage period of 15 d. Overall, the MDA formed at the refrigeration and super chilling storage temperatures could promote structural changes in, and the oxidative degradation of, proteins to different degrees, leading to the deterioration of the fillet quality. This study provides a scientific basis for investigating the relationship between fish quality and changes in the MDA content during low-temperature storage.

Structural modification induced by heat treatments improves the emulsifying attributes of lacquer seed protein isolate

The lacquer seed oil has received extensive attention in the food industry due to its health function, such as regulating blood lipids. But its by-product, lacquer seed meal, is often used as a low-value-added product such as animal feed. Lacquer seed meal contains about 20 % protein, which has amphiphilic properties, and there is limited attention to its emulsifying properties. In this study, the impact of heat treatment on the emulsifying properties of lacquer seed protein isolate (LSPI) was investigated. The EAI and ESI of the 120 °C heated LSPI increased by 77.1 % and 55.2 %, respectively. The emulsions prepared using heat-modified LSPI (120 °C) further showed lower hydroperoxide, TBARS and protein carbonyl contents (only 61.3 %, 61.0 % and 58.6 % of control) after storage. This result indicates that heat-treated LSPI retarded lipid and protein oxidation in LSPI-stabilized emulsions during storage. Changes in protein structure showed that increasing heating temperature resulted in the depolymerization of tertiary structure, higher surface hydrophobicity and lower contents of α-helix of LSPI. These changes in protein structure made the heated LSPIs have better emulsifying properties. Therefore, these findings developed a new use of LSPI and greatly enhanced the potential of LSPI as a natural emulsifier in the food industry.