Consolidating the gelling performance of myofibrillar protein using a novel OSA-modified-starch-stabilized Pickering emulsion filler: Effect of starches with distinct crystalline types

Incorporation of cross-linked/acetylated tapioca starches on the gelling properties, rheological behaviour, and microstructure of low-salt myofibrillar protein gels: Perspective on phase transition

This study investigated the gelling properties, rheological behaviour, and microstructure of heat-induced, low-salt myofibrillar protein (MP) gels containing different levels (2%, 4%, 6%, and 8%, w/w) of cross-linked (CTS) or acetylated (ATS) tapioca starch. The results indicated that either CTS or ATS significantly enhanced the gel strength and water-holding capacity of low-salt MP gels (P < 0.05), an outcome verified by the rheological behaviour test results under different modes. Furthermore, iodine-staining images indicated that the MP-dominated continuous phase gradually transited to a starch-dominated phase with increasing CTS or ATS levels, and 4% was the critical point for this phase transition. In addition, hydrophobic interactions and disulphide bonds constituted the major intermolecular forces of low-salt MP gels, effectively promoting phase transition. In brief, modified tapioca starches possess considerable potential application value in low-salt meat products.

Structure, characterization, and application of a novel thermoreversible emulsion gel fabricated by citrate agar

A novel thermoreversible emulsion gel was successfully prepared with citrate agar (CA) as the sole emulsifier. Compared with native agar gel emulsion, CA gel emulsion (CAGE) formed a stable emulsion gel when the CA concentration was increased to 1.25 % (w/w). Results of time-temperature scanning experiments showed that the emulsion gel rapidly transformed into liquid emulsion when heated to 40-50 °C and then solidified into emulsion gel after cooling to the critical temperature of solidification. The emulsion gel had stable sol-gel transformation ability after seven cycles repeated heating-cooling treatment (HCT) at 85 °C and 4 °C. However, the stability of emulsion gels gradually decreased because of the large-droplet formation during heating, which affected the CA molecular-reconfiguration network structure in cooling. The conjunction analysis of microstructure and properties of the emulsion gel indicated that its stability depended primarily on the spatial repulsion and electrostatic repulsion provided by CA gel, and the main factor driving thermal reversibility was the temperature-responsive gelation performance of CA. The retention of quercetin was >90.23 % after seven HCTs because CAGEG enhanced the homogeneity and stability of the droplets.

Texture characterization of 3D printed fibrous whey protein-starch composite emulsion gels as dysphagia food: A comparative study on starch type

Texture-modified, multi-nutrient composite foods are essential in clinical treatment for dysphagia individuals. Herein, fibrous whey protein-stabilized emulsion and different crystalline starches (wheat, corn, rice, potato, sweet potato, cassava, mung bean and pea) were used to structure composite emulsion gels (CEGs). These CEGs then underwent 3D printing to explore the feasibility of developing a dysphagia diet. The network of molded CEGs was mainly maintained by hydrophobic interactions and hydrogen bonds. Rice and cassava starches were better suited for structuring soft-textured CEGs. Compared with molded CEGs, 3D printing decreased hydrogen bonds and the compactness of the nano-aggregate structure within the gel system, forming a looser gel network and softening the CEGs. Interestingly, these effects were more pronounced for the CEGs with high initial hardness. This study provided new strategy to fabricate CEGs as dysphagia diet using fibrous whey protein and starch, and to design texture-modified foods for patients using 3D printing.

Recent progress on Pickering emulsion stabilized essential oil added biopolymer-based film for food packaging applications: A review

Nowadays food safety and protection are a growing concern for food producers and food industry. The stability of food-grade materials is key in food processing and shelf life. Pickering emulsions (PEs) have gained significant attention in food regimes owing to their stability enhancement of food specimens. PE can be developed by high and low-energy methods. The use of PE in the food sector is completely safe as it uses solid biodegradable particles to stabilize the oil in water and it also acts as an excellent carrier of essential oils (EOs). EOs are useful functional ingredients, the inclusion of EOs in the packaging film or coating formulation significantly helps in the improvement of the shelf life of the packed food item. The highly volatile nature, limited solubility and ease of oxidation in light of EOs restricts their direct use in packaging. In this context, the use of PEs of EOs is suitable to overcome most of the challenges, Therefore, recently there have been many papers published on PEs of EOs including active packaging film and coatings and the obtained results are promising. The current review amalgamates these studies to inform about the chemistry of PEs followed by types of stabilizers, factors affecting the stability and different high and low-energy manufacturing methods. Finally, the review summarizes the recent advancement in PEs-added packaging film and their application in the enhancement of shelf life of food.

Effect of starch and peanut oil on physicochemical and gel properties of myofibrillar protein: Amylose content and addition form

Starch and peanut oil (PO) were widely used to improve the gel properties of surimi, however, the impact mechanism of addition forms on the denaturation and aggregation behavior of myofibrillar protein (MP) is not clear. Therefore, the effect of starch, PO, starch/PO mixture, and starch-based emulsion on the physicochemical and gel properties of MP was investigated. The results showed that amylose could accelerate the aggregation of MP, while amylopectin was conducive to the improvement of gel properties. The addition of PO, starch/PO mixture, or starch-based emulsion increased the turbidity, solubility, sulfhydryl content of MP, and improved the gel strength, whiteness, and texture of MP gel. However, compared with starch/PO mixture group, the gel strength of MP with waxy, normal and high amylose corn starch-based emulsion increased by 22.68 %, 10.27 %, and 32.89 %, respectively. The MP containing emulsion had higher storage modulus than MP with starch/PO mixture under the same amylose content. CLSM results indicated that the oil droplets aggregated in PO or starch/PO mixture group, while emulsified oil droplets filled the protein gel network more homogeneously. Therefore, the addition of starch and PO in the form of emulsion could effectively play the filling role to improve the gel properties of MP.

Perilla seed oil high internal phase emulsion improve the gel properties of myofibrillar protein

The effects of perilla seed oil high internal phase emulsions stabilized by pea protein (PP-PSO HIPEs) on the gel properties and conformation of myofibrillar protein (MP) gels were investigated. The results showed that the PP-PSO HIPEs with 4.0 % (w/v) PP formed stable HIPEs with low droplet size and good viscoelasticity. The addition of PP-PSO HIPEs (5.0 % - 15.0 %) could significantly improve the MP gel properties (P < 0.05), while the addition of 10.0 % PP-PSO HIPEs showed the highest gel strength and water holding capacity. Otherwise, the MP gels with 10.0 % PP-PSO HIPEs showed higher proportions of immobile water (PT22) and lower proportion of free water (PT23), and the Raman spectra suggested that the content of α-helix decreased, while the content of β-sheet increased (P < 0.05), thus facilitating the formation of better gel properties. Therefore, the addition of PP-PSO HIPEs is a potential alternative for developing fat-reduced meat products.

Salmon protein gel enhancement for dysphagia diets: Konjac glucomannan and composite emulsions as texture modifiers

The growing prevalence of dysphagia among the aging population presents a significant challenge. Many highly nutritious foods, like salmon, are often unsuitable for the elderly due to their firm texture when heated. To address this concern, a combination of salmon myofibrillar protein (SMP), Konjac glucomannan (KGM), and different emulsion fillers-such as oil droplets, octenyl succinic anhydride (OSA)-modified potato starch emulsion, and high methoxylated pectin (HMP) emulsions-was selected to enhance the network of salmon protein gels with the aims to create potential applications as dysphagia-friendly foods. The International Dysphagia Dietary Standardization Initiative (IDDSI) test indicated that all gel samples were classified as level 5. The OSA-SMP-KGM gel exhibited notably higher cohesiveness (P < 0.05), reduced adhesion, and enhanced mouthfeel. The OSA-SMP-KGM gel exhibited a smooth surface and excellent water retention (92.4 %), rendering it suitable for individuals with swallowing difficulties, particularly those prone to experiencing dry mouth. The yield stress of OSA-SMP-KGM gel was 594.14 Pa and stable structure was maintained during chewing and swallowing (γe/γv = 62.5). This study serves as a valuable reference for developing salmon-based products that are not only highly nutritious but also fulfill the criteria for a desirable swallowing texture.

The impact of differently structured starch gels on the gastrointestinal fate of a curcumin-containing nanoemulsion

In this study, we focused on the in vitro gastrointestinal digestion of curcumin-nanoemulsion-loaded corn starch gels formed using starches with different amylose contents, i.e. waxy (WCS), normal (NCS) and high amylose (HACS) corn starches and their impact on the release and bioaccessibility of curcumin. Curcumin nanoemulsion (CNE) loading significantly increased the storage modulus of the WCS and NCS gels by interspersing in the gelatinized continuous phase, whereas it decreased in the HACS gel due to the formation of a weak network structure as a result of the incomplete gelatinized amylose granules. During the gastric digestion, the disintegration and emptying of the WCS + CNE gel from the stomach was the slowest compared to the other two gels. The changes in the stomach, influenced the emptying of total solids (HACS + CNE > NCS + CNE > WCS + CNE) into the gastric digesta, which further affected the rate of starch and lipid digestion during the intestinal phase. The HACS + CNE and NCS + CNE gels showed a higher and faster release of curcumin compared to the WCS + CNE gel that showed a slower and sustained release during the intestinal digestion. This study demonstrated that the oral-gastric digestion of these starch gels was more dependent on the gel structures rather than on the molecular properties of the starches. The dynamic gastric environment resulted in the formation of distinct gel structures, which significantly influenced the composition and microstructure of the emptied digesta, further affecting starch hydrolysis and curcumin bioaccessibility in the small intestine.