Fabrication of anthocyanin–rich W1/O/W2 emulsion gels based on pectin–GDL complexes: 3D printing performance

Effect of high-pressure-homogenisation on the interaction between pomegranate peel pectin fractions and anthocyanins in acidic environment

In this study, changes in the basic composition and structural characterisation of water-soluble pectin (WSP), homogalacturonan (HG) and rhamnogalacturonan-I (RG-I) from pomegranate peel were investigated after high-pressure-homogenisation (HPH) at 50 MPa and 300 MPa. The interactions between three pectin and anthocyanin (ACN) complex were also studied. The three pectin fractions were mainly composed of galacturonic acid (34.95%-87.69%), all with low degrees of methyl-esterification ≤41.20%. HPH at 300 MPa increased the binding ratios of ACN to three pectin fractions by 34.22%-34.59%. Changes in the structural characterisation results of pectin confirmed that the depolymerisation and breakdown of the side chains of pectin after HPH promoted electrostatic interactions, hydrogen bond and hydrophobic interaction between pectin and ACN. Correspondingly, the thermal and storage stabilities of ACN in the complex was boosted after HPH at 300 MPa. This study provides insights into the interaction between pectin and ACN under HPH.

Carboxymethylcellulose-induced depletion attraction to stabilize high internal phase Pickering emulsions for the elderly: 3D printing and β-carotene delivery

In this study, a carboxymethylcellulose (CMC) induced depletion attraction was developed to stabilize high internal phase Pickering emulsions (HIPPEs) as age-friendly 3D printing inks. The results demonstrated that depletion force induced the adsorption of yolk particles at the droplet interface and the formation of osmotic droplet clusters, thereby increasing the stability of HIPPEs. In addition, the rheological properties and nutrient delivery properties of HIPPEs could be adjusted by the mass ratio of yolk/CMC. The HIPPEs stabilized at yolk/CMC mass ratio 20:7.5 showed optimal printability, viscoelastic, structural recovery, and swallowability. HIPPEs have been applied to 3D printing, International Dysphagia Dietary Standardization Initiative (IDDSI) test, and in vitro digestive simulation in the elderly, indicating their attractive appearance, safe swallowability, and enhanced bioaccessibility of β-carotene. Our work provides new ideas for developing age-friendly foods with plasticity and nutrient delivery capacity by depletion attraction stabilizing HIPPEs.

Improvement of physicochemical properties and quercetin delivery ability of fermentation-induced soy protein isolate emulsion gel processed by ultrasound

This study aimed to investigate the effects of ultrasonic treatment at different powers on the physicochemical properties, microstructure and quercetin delivery capacity of fermentation-induced soy protein isolate emulsion gel (FSEG). The FSEG was prepared by subjecting soy protein isolate (SPI) emulsion to ultrasonic treatment at various powers (0, 100, 200, 300, and 400 W), followed by lactic acid bacteria fermentation. Compared with the control group (0 W), the FSEG treated with ultrasound had higher hardness, water holding capacity (WHC) and rheological parameters. Particularly, at an ultrasonic power of 300 W, the FSEG had the highest hardness (101.69 ± 4.67 g) and WHC (75.20 ± 1.07%) (p < 0.05). Analysis of frequency sweep and strain scanning revealed that the storage modulus (G') and yield strains of FSEG increased after 300 W ultrasonic treatment. Additionally, the recovery rate after creep recovery test significantly increased from 18.70 ± 0.49% (0 W) to 58.05 ± 0.54% (300 W) (p < 0.05). Ultrasound treatment also resulted in an increased β-sheet content and the formation of a more compact micro-network structure. This led to a more uniform distribution of oil droplets and reduced mobility of water within the gel. Moreover, ultrasonic treatment significantly enhanced the encapsulation efficiency of quercetin in FSEG from 81.25 ± 0.62 % (0 W) to 90.04 ± 1.54% (300 W). The bioaccessibility of quercetin also increased significantly from 28.90 ± 0.40% (0 W) to 42.58 ± 1.60% (300 W) (p < 0.05). This study enriches the induction method of soy protein emulsion gels and provides some references for the preparation of fermented emulsion gels loaded with active substances.

An Updated Comprehensive Overview of Different Food Applications of W1/O/W2 and O1/W/O2 Double Emulsions

Double emulsions (DEs) present promising applications as alternatives to conventional emulsions in the pharmaceutical, cosmetic, and food industries. However, most review articles have focused on the formulation, preparation approaches, physical stability, and release profile of encapsulants based on DEs, particularly water-in-oil-in-water (W1/O/W2), with less attention paid to specific food applications. Therefore, this review offers updated detailed research advances in potential food applications of both W1/O/W2 and oil-in-water-in-oil (O1/W/O2) DEs over the past decade. To this end, various food-relevant applications of DEs in the fortification; preservation (antioxidant and antimicrobial targets); encapsulation of enzymes; delivery and protection of probiotics; color stability; the masking of unpleasant tastes and odors; the development of healthy foods with low levels of fat, sugar, and salt; and design of novel edible packaging are discussed and their functional properties and release characteristics during storage and digestion are highlighted.

Development of high internal phase Pickering emulsions stabilized by egg yolk and carboxymethylcellulose complexes to improve β-carotene bioaccessibility for the elderly

The work aimed to develop the multi-protein mixture of egg yolk as natural particles to stabilize high internal phase Pickering emulsions (HIPPEs) to improve the bioaccessibility of β-carotene in the elderly. The results showed that the depletion attraction drove the adsorption of egg yolk protein particles at the oil-water interface and the formation of osmotic droplet clusters due to the attachment of particle-coated droplets in the dispersed phase, leading to kinetic blocking and stable gelation of HIPPEs. Rheological measurements showed that HIPPEs had shear thinning, low shear stress, viscoelastic properties, and structural recovery properties, which facilitated easy consumption for the elderly. The stability of HIPPEs was verified by ionic and centrifugal stability tests, demonstrating their potential for application to complex gastric environments. HIPPEs have been applied to the International Dysphagia Dietary Standardization Initiative (IDDSI) test and simulated in vitro digestion in older adults, demonstrating their safe swallowability and high β-carotene bioaccessibility. Our findings suggest solutions for food practitioners facing the aging problem and provide new insights for preparing age-friendly foods.

Anthocyanin-Loaded Polymers as Promising Nature-Based, Responsive, and Bioactive Materials

Anthocyanins are a specific group of molecules found in nature that have recently received increasing attention due to their interesting biological and colorimetric properties that have been successfully applied in several fields such as food preservation and biomedicine. Consequently, reviews devoted to a general overview of these flavonoids have proliferated in recent years. Meanwhile, the incorporation of anthocyanins into polymeric systems has become an interesting strategy to widen the applicability of these molecules and develop new smart and functional polymers in the above cited areas. However, anthocyanin-based polymers have been scarcely reviewed in the literature. Accordingly, this review aims to be a systematic summary of the most recent approaches for the incorporation of anthocyanins into macro-, micro-, or nanostructured polymers. Moreover, this work describes the fundamentals of the applicability of smart anthocyanin-based polymers and offers an updated review of their most interesting applications as sensors, biological regulators, and active materials.

Advances in embedding techniques of anthocyanins: Improving stability, bioactivity and bioavailability

The health benefits of anthocyanins have attracted extensive research interest. However, anthocyanins are sensitive to certain environmental and gastrointestinal conditions and have low oral bioavailability. It has been reported that delivery systems made in different ways could improve the stability, bioavailability and bioactivity of anthocyanins. This present review summarizes the factors affecting the stability of anthocyanins and the reasons for poor bioavailability, and various technologies for encapsulation of anthocyanins including microcapsules, nanoemulsions, microemulsions, Pickering emulsions, nanoliposomes, nanoparticles, hydrogels and co-assembly with amphiphilic peptides were discussed. In particular, the effects of these encapsulation technologies on the stability, bioavailability and bioactivities of anthocyanins in vitro and in vivo experiments are reviewed in detail, which provided scientific insights for anthocyanins encapsulation methods. However, the application of anthocyanins in food industry as well as the biological fate and functional pathways in vivo still need to be further explored.

Advances in the Preparation, Stability, Metabolism, and Physiological Roles of Anthocyanins: A Review

Anthocyanins are natural flavonoid polyphenolic compounds widely found in fruits and vegetables. They exhibit antioxidant properties and prophylactic effects in the immune and cardiovascular systems, confer protection against cancer, and contribute to the prevention of cardiovascular diseases. Thus, their incorporation into functional foods, pharmaceuticals, supplements, and cosmetic formulations aims at promoting human well-being. This review comprehensively outlined the structural attributes of anthocyanins, expanding upon diverse methodologies employed for their extraction and production. Additionally, the stability, metabolic pathways, and manifold physiological functions of anthocyanins were discussed. However, their constrained fat solubility, susceptibility to instability, and restricted bioavailability collectively curtail their applicability and therapeutic efficacy. Consequently, a multidimensional approach was imperative, necessitating the exploration of innovative pathways to surmount these limitations, thereby amplifying the utilitarian significance of anthocyanins and furnishing pivotal support for their continual advancement and broader application.

Improving the Stability of Water-in-Oil Emulsions with Medium Internal Phase by the Introduction of Gelatin

The water-in-oil (W/O) emulsion with a medium aqueous phase may be limited in food and cosmetics due to its poor stability and high cost. Herein, this work proposed a facile strategy to improve the W/O emulsion stability by introducing gelatin. The influence of different gelatin concentrations (0, 0.5%, 1.0%, 2.0%, and 4.0%) on the stability and properties of W/O emulsions was mainly investigated. Results showed that the obtained emulsions still belonged to W/O emulsions after adding gelatin to the aqueous phase. As the gelatin concentration increased (0~4.0%), the interfacial tension decreased, which is conducive to promoting the interface adsorption of polyglycerol polyricinoleate (PGPR). Furthermore, introducing gelatin also improved the water-holding capacity (WHC) (33.50~6.32%) and viscosity of W/O emulsions and reduced the droplet size (37.47~8.75 μm) of emulsions. The enhanced interfacial adsorption and aqueous gelation induced by gelatin addition promoted the formation of a tight overall emulsion network structure by the interaction between the interfacial adsorbed PGPR, as well as PGPR and gelatin in the aqueous phase. The enhancement of the overall network effectively improved the storage stability (35 d), thermal stability (20 min, 80 °C), and freeze-thaw stability (10 cycles) of emulsions, especially at 4.0% gelatin concentration. Hence, this study can provide guidance for the improvement and regulation of the stabilities of W/O emulsions.