Effect of sonication time and heat treatment on the structural and physical properties of chitosan/graphene oxide nanocomposite films

Characterization of a Graphene Oxide-Reinforced Whey Hydrogel as an Eco-Friendly Absorbent for Food Packaging

This study presents a structural analysis of a whey and gelatin-based hydrogel reinforced with graphene oxide (GO) by ultraviolet and visible (UV-VIS) spectroscopy, Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction (XRD). The results revealed barrier properties in the UV range for the reference sample (containing no graphene oxide) and the samples with minimal GO content of 0.66×10−3% and 3.33×10−3%, respectively, in the UV-VIS and near-IR range; for the samples with higher GO content, this was 6.67×10−3% and 33.33×10−3% as an effect of the introduction of GO into the hydrogel composite. The changes in the position of diffraction angles 2θ from the X-ray diffraction patterns of GO-reinforced hydrogels indicated a decrease in the distances between the turns of the protein helix structure due to the GO cross-linking effect. Transmission electron spectroscopy (TEM) was used for GO, whilst scanning electron microscopy (SEM) was used for the composite characterization. A novel technique for investigating the swelling rate was presented by performing electrical conductivity measurements, the results of which led to the identification of a potential hydrogel with sensor properties.

Swelling and Antimicrobial Activity Characterization of a GO-Reinforced Gelatin-Whey Hydrogel

Whey-based hydrogel samples with increasing concentrations of graphene oxide (GO) were studied, against a control sample (M), for swelling behavior in light of nuclear magnetic resonance (NMR) and mathematical models of the diffusion process and for antibacterial activity. Graphene oxide (GO) is an optimal filler for whey-based hydrogels, giving them improved mechanical and swelling properties at low concentrations. Crosslinking induces a certain stiffness of the hydrogels, which is why only the first part of the swelling process (<60%) follows the first-order model, while during the whole time interval, the swelling process follows the second-order diffusion model. The NMR relaxometry results are consistent with the swelling behavior of GO-reinforced whey−gelatin composite hydrogels, showing that higher GO concentrations induce a higher degree of cross-linking and, therefore, lower swelling capacity. Only hydrogel samples with higher GO concentrations demonstrated antibacterial activity.

Antioxidant and Antimicrobial Properties of Mung Bean Phyto-Film Combined with Longkong Pericarp Extract and Sonication

Mung bean (Vigna radiata) flour serves as an excellent biopolymer and a potential material for producing antioxidant and antimicrobial phyto-films. In addition to mung bean flour, this study also combined the longkong (Aglaia dookkoo Griff.) pericarp extract (LPE, 1.5%) and ultrasonication process (0 (C1), 2 (T1), 4 (T2), 6 (T3), 8 (T4), and 10 (T5) min, sonicated at 25 kHz, 100% amplitude) in film emulsion production to improve the antioxidant and antimicrobial efficiency in the phyto-films. This study showed that sonication increased the phyto-films’ color into more lightness and yellowness, and the intensity of the color changes was in accordance with the increased sonication time. Alternatively, the thickness, water vapor permeability, and solubility of the films were adversely affected by extended sonication. In addition, elongation at break and tensile strength increased while the Young modulus decreased in the phyto-films with the extended sonication. Furthermore, the droplet size and polydispersity index of the phyto-films decreased with extended sonication. Conversely, the zeta potential of the film tended to increase with the treatments. Furthermore, phytochemicals such as total phenolic content and total flavonoid contents, and the radical scavenging ability of phyto-films against the DPPH radical, ABTS radical, superoxide radical, hydroxyl radical, and ferrous chelating activity, were significantly higher, and they were steadily increased in the films with the extended sonication time. Furthermore, the phyto-films showed a significant control against Gram (-) pathogens, followed by Gram (+) pathogens. A higher inhibitory effect was noted against L. monocytogens, followed by S. aureus and B. subtilis. Similarly, the phyto-films also significantly inhibited the Gram (-) pathogens, and significant control was noted against C. jejuni, followed by E. coli and P. aeruginosa. Regardless of the mung bean flour, this study found that longkong pericarp extract and the sonication process could also effectively be used in the film emulsions to enhance the efficiency of the antioxidant and antimicrobial properties of phyto-films.

Recent Advances in Chitin and Chitosan/Graphene-Based Bio-Nanocomposites for Energetic Applications

Herein, we report recent developments in order to explore chitin and chitosan derivatives for energy-related applications. This review summarizes an introduction to common polysaccharides such as cellulose, chitin or chitosan, and their connection with carbon nanomaterials (CNMs), such as bio-nanocomposites. Furthermore, we present their structural analysis followed by the fabrication of graphene-based nanocomposites. In addition, we demonstrate the role of these chitin- and chitosan-derived nanocomposites for energetic applications, including biosensors, batteries, fuel cells, supercapacitors and solar cell systems. Finally, current limitations and future application perspectives are entailed as well. This study establishes the impact of chitin- and chitosan-generated nanomaterials for potential, unexplored industrial applications.

Two Fascinating Polysaccharides: Chitosan and Starch. Some Prominent Characterizations for Applying as Eco-Friendly Food Packaging and Pollutant Remover in Aqueous Medium. Progress in Recent Years: A Review

The call to use biodegradable, eco-friendly materials is urgent. The use of biopolymers as a replacement for the classic petroleum-based materials is increasing. Chitosan and starch have been widely studied with this purpose: to be part of this replacement. The importance of proper physical characterization of these biopolymers is essential for the intended application. This review focuses on characterizations of chitosan and starch, approximately from 2017 to date, in one of their most-used applications: food packaging for chitosan and as an adsorbent agent of pollutants in aqueous medium for starch.