Expression of novel β-glucanase Cel12A from Stachybotrys atra in bacterial and fungal hosts

Stachybotrys chartarum-A Hidden Treasure: Secondary Metabolites, Bioactivities, and Biotechnological Relevance

Fungi are renowned as a fountainhead of bio-metabolites that could be employed for producing novel therapeutic agents, as well as enzymes with wide biotechnological and industrial applications. Stachybotrys chartarum (black mold) (Stachybotriaceae) is a toxigenic fungus that is commonly found in damp environments. This fungus has the capacity to produce various classes of bio-metabolites with unrivaled structural features, including cyclosporins, cochlioquinones, atranones, trichothecenes, dolabellanes, phenylspirodrimanes, xanthones, and isoindoline and chromene derivatives. Moreover, it is a source of various enzymes that could have variable biotechnological and industrial relevance. The current review highlights the formerly published data on S. chartarum, including its metabolites and their bioactivities, as well as industrial and biotechnological relevance dated from 1973 to the beginning of 2022. In this work, 215 metabolites have been listed and 138 references have been cited.

Transcriptional analysis of the lichenase-like gene cel12A of the filamentous fungus Stachybotrys atra BP-A and its relevance for lignocellulose depolymerization

To rationally optimize the production of industrial enzymes by molecular means requires previous knowledge of the regulatory circuits controlling the expression of the corresponding genes. The genus Stachybotrys is an outstanding producer of cellulose-degrading enzymes. Previous studies isolated and characterized the lichenase-like/non-typical cellulase Cel12A of S. atra (AKA S. chartarum) belonging to glycosyl hydrolase family 12 (GH12). In this study, we used RT-qPCR to determine the pattern of expression of cel12A under different carbon sources and initial ambient pH. Among the carbon sources examined, rice straw triggered a greater increase in the expression of cel12A than 1% lactose or 0.1% glucose, indicating specific induction by rice straw. In contrast, cel12A was repressed in the presence of glucose even when combined with this inducer. The proximity of 2 adjacent 5'-CTGGGGTCTGGGG-3' CreA consensus target sites to the translational start site of cel12A strongly suggests that the carbon catabolite repression observed is directly mediated by CreA. Ambient pH did not have a significant effect on cel12A expression. These findings present new knowledge on transcriptional regulatory networks in Stachybotrys associated with cellulose/hemicellulose depolymerization. Rational engineering of CreA to remove CCR could constitute a novel strategy for improving the production of Cel12A.

Loop 3 of Fungal Endoglucanases of Glycoside Hydrolase Family 12 Modulates Catalytic Efficiency

Glycoside hydrolase (GH) family 12 comprises enzymes with a wide range of activities critical for the degradation of lignocellulose. However, the important roles of the loop regions of GH12 enzymes in substrate specificity and catalytic efficiency remain poorly understood. This study examined how the loop 3 region affects the enzymatic properties of GH12 glucanases using NfEG12A from Neosartorya fischeri P1 and EG (PDB 1KS4) from Aspergillus niger Acidophilic and thermophilic NfEG12A had the highest catalytic efficiency (k_cat/K_m , 3,001 and 263 ml/mg/s toward lichenin and carboxymethyl cellulose sodium [CMC-Na], respectively) known so far. Based on the multiple-sequence alignment and homology modeling, two specific sequences (FN and STTQA) were identified in the loop 3 region of GH12 endoglucanases from fungi. To determine their functions, these sequences were introduced into NfEG12A, or the counterpart sequence STTQA was removed from EG. These modifications had no effects on the optimal pH and temperature or substrate specificity but changed the catalytic efficiency (k_cat/K_m ) of these enzymes (in descending order, NfEG12A [100%], NfEG12A-FN [140%], and NfEG12A-STTQA [190%]; EG [100%] and EGΔSTTQA [41%]). Molecular docking and dynamic simulation analyses revealed that the longer loop 3 in GH12 may strengthen the hydrogen-bond interactions between the substrate and protein, thereby increasing the turnover rate (k_cat). This study provides a new insight to understand the vital roles of loop 3 for GH12 endoglucanases in catalysis.IMPORTANCE Loop structures play critical roles in the substrate specificity and catalytic hydrolysis of GH12 enzymes. Three typical loops exist in these enzymes. Loops 1 and 2 are recognized as the catalytic loops and are closely related to the substrate specificity and catalytic efficiency. Loop 3 locates in the -1 or +1 subsite and varies a lot in amino acid composition, which may play a role in catalysis. In this study, two GH12 glucanases, NfEG12A and EG, which were mutated by introducing or deleting partial loop 3 sequences FN and/or STTQA, were selected to identify the function of loop 3. It revealed that the longer loop 3 of GH12 glucanases may strengthen the hydrogen network interactions between the substrate and protein, consequently increasing the turnover rate (k_cat). This study proposes a strategy to increase the catalytic efficiency of GH12 glucanases by improving the hydrogen network between substrates and catalytic loops.

Molecular and biochemical characterization of recombinant cel12B, cel8C, and peh28 overexpressed in Escherichia coli and their potential in biofuel production

BACKGROUND

The high crystallinity of cellulosic biomass myofibrils as well as the complexity of their intermolecular structure is a significant impediment for biofuel production. Cloning of celB-, celC-encoded cellulases (cel12B and cel8C) and peh-encoded polygalacturonase (peh28) from Pectobacterium carotovorum subsp. carotovorum (Pcc) was carried out in our previous study using Escherichia coli as a host vector. The current study partially characterizes the enzymes' molecular structures as well as their catalytic performance on different substrates which can be used to improve their potential for lignocellulosic biomass conversion.

RESULTS

β-Jelly roll topology, (α/α)₆ antiparallel helices and right-handed β-helices were the folds identified for cel12B, cel8C, and peh28, respectively, in their corresponding protein model structures. Purifications of 17.4-, 6.2-, and 6.0-fold, compared to crude extract, were achieved for cel12B and cel8C, and peh28, respectively, using specific membrane ultrafiltrations and size-exclusion chromatography. Avicel and carboxymethyl cellulose (CMC) were substrates for cel12B, whereas for cel8C catalytic activity was only shown on CMC. The enzymes displayed significant synergy on CMC but not on Avicel when tested for 3 h at 45 °C. No observed β-glucosidase activities were identified for cel8C and cel12B when tested on p-nitrophenyl-β-d-glucopyranoside. Activity stimulation of 130% was observed when a recombinant β-glucosidase from Pcc was added to cel8C and cel12B as tested for 3 h at 45 °C. Optimum temperature and pH of 45 °C and 5.4, respectively, were identified for all three enzymes using various substrates. Catalytic efficiencies (k_cat/K_m) were calculated for cel12B and cel8C on CMC as 0.141 and 2.45 ml/mg/s respectively, at 45 °C and pH 5.0 and for peh28 on polygalacturonic acid as 4.87 ml/mg/s, at 40 °C and pH 5.0. Glucose and cellobiose were the end-products identified for cel8C, cel12B, and β-glucosidase acting together on Avicel or CMC, while galacturonic acid and other minor co-products were identified for peh28 action on pectin.

CONCLUSIONS

This study provides some insight into which parameters should be optimized when application of cel8C, cel12B, and peh28 to biomass conversion is the goal.

Cloning, Expression, and Characterization of a Thermophilic Endoglucanase, AcCel12B from Acidothermus cellulolyticus 11B

The gene ABK52392 from the thermophilic bacterium Acidothermus cellulolyticus 11B was predicted to be endoglucanase and classified into glycoside hydrolase family 12. ABK52392 encodes a protein containing a catalytic domain and a carbohydrate binding module. ABK52392 was cloned and functionally expressed in Escherichia coli. After purification by Ni-NTA agarose affinity chromatography and Q-Sepharose^® Fast Flow chromatography, the properties of the recombinant protein (AcCel12B) were characterized. AcCel12B exhibited optimal activity at pH 4.5 and 75 °C. The half-lives of AcCel12B at 60 and 70 °C were about 90 and 2 h, respectively, under acidic conditions. The specific hydrolytic activities of AcCel12B at 70 °C and pH 4.5 for sodium carboxymethylcellulose (CMC) and regenerated amorphous cellulose (RAC) were 118.3 and 104.0 U·mg⁻¹, respectively. The K_m and V_max of AcCel12B for CMC were 25.47 mg·mL⁻¹ and 131.75 U·mg⁻¹, respectively. The time course of hydrolysis for RAC was investigated by measuring reducing ends in the soluble and insoluble phases. The total hydrolysis rate rapidly decreased after the early stage of incubation and the generation of insoluble reducing ends decreased earlier than that of soluble reducing ends. High thermostability of the cellulase indicates its potential commercial significance and it could be exploited for industrial application in the future.

Expression, purification, crystallization and preliminary X-ray diffraction analysis of Aspergillus terreus endo-β-1,4-glucanase from glycoside hydrolase family 12

Endoglucanases are important enzymes that are involved in the modification and degradation of cellulose. Filamentous fungi such as Aspergillus terreus are effective biomass degraders in nature owing to their capacity to produce an enzymatic arsenal of glycoside hydrolases, including endoglucanase from glycoside hydrolase family 12 (GH12). The A. terreus GH12 endoglucanase was cloned and overexpressed in A. nidulans, purified and crystallized. A single crystal was obtained from a solution consisting of 2 M ammonium sulfate, 5%(v/v) 2-propanol. X-ray diffraction data were collected to a resolution of 1.85 Å using synchrotron radiation and a preliminary molecular-replacement solution was obtained in the trigonal space group P3(2)21. The unit-cell parameters were a = b = 103.24, c = 48.96 Å.