Benefits of an increased prosthetic ankle range of motion for individuals with a trans-tibial amputation walking with a new prosthetic foot

Lower-extremity inter-joint coordination variability in active individuals with transtibial amputation and healthy males during gait

This study was aimed to compare the variability of inter-joint coordination in the lower-extremities during gait between active individuals with transtibial amputation (TTAs) and healthy individuals (HIs). Fifteen active male TTAs (age: 40.6 ± 16.24 years, height: 1.74 ± 0.09 m, and mass: 71.2 ± 8.87 kg) and HIs (age: 37.25 ± 13.11 years, height: 1.75 ± 0.06 m, and mass: 74 ± 8.75 kg) without gait disabilities voluntarily participated in the study. Participants walked along a level walkway covered with Vicon motion capture system, and their lower-extremity kinematics data were recorded during gait. The spatiotemporal gait parameters, lower-extremity joint range of motion (ROM), and their coordination and variability were calculated and averaged to report a single value for each parameter based on biomechanical symmetry assumption in the lower limbs of HIs. Additionally, these parameters were separately calculated and reported for the intact limb (IL) and the prosthesis limb (PL) in TTAs individuals. Finally, a comparison was made between the averaged values in HIs and those in the IL and PL of TTAs subjects. The results showed that the IL had a significantly lower stride length than that of the PL and averaged value in HIs, and the IL had a significantly lower knee ROM and greater stance-phase duration than that of HIs. Moreover, TTAs showed different coordination patterns in pelvis-to-hip, hip-to-knee, and hip-to-ankle couplings in some parts of the gait cycle. It concludes that the active TTAs with PLs walked with more flexion of the knee and hip, which may indicate a progressive walking strategy and the differences in coordination patterns suggest active TTA individuals used different neuromuscular control strategies to adapt to their amputation. Researchers can extend this work by investigating variations in these parameters across diverse patient populations, including different amputation etiologies and prosthetic designs. Moreover, Clinicians can use the findings to tailor rehabilitation programs for TTAs, emphasizing joint flexibility and coordination.

Quantification of push-off and collision work during step-to-step transition in amputees walking at self-selected speed: Effect of amputation level

Maintaining forward walking during human locomotion requires mechanical joint work, mainly provided by the ankle-foot in non-amputees. In lower-limb amputees, their metabolic overconsumption is generally attributed to reduced propulsion. However, it remains unclear how altered walking patterns resulting from amputation affect energy exchange. The purpose of this retrospective study was to investigate the impact of self-selected walking speed (SSWS) on mechanical works generated by the ankle-foot and by the entire lower limbs depending on the level of amputation. 155 participants, including 47 non-amputees (NAs), 40 unilateral transtibial amputees (TTs) and 68 unilateral transfemoral amputees (TFs), walked at their SSWS. Positive push-off work done by the trailing limb (WStS+) and its associated ankle-foot (Wankle-foot+), as well as negative collision work done by the leading limb (WStS-) were analysed during the transition from prosthetic limb to contralateral limb. An ANCOVA was performed to assess the effect of amputation level on mechanical works, while controlling for SSWS effect. After adjusting for SSWS, NAs produce more push-off work with both their biological ankle-foot and trailing limb than amputees do on prosthetic side. Using the same type of prosthetic feet, TTs and TFs can generate the same amount of prosthetic Wankle-foot+, while prosthetic WStS+ is significantly higher for TTs and remains constant with SSWS for TFs. Surprisingly and contrary to theoretical expectations, the lack of propulsion at TFs' prosthetic limb did not affect their contralateral WStS-, for which a difference is significant only between NAs and TTs. Further studies should investigate the relationship between the TFs' inability to increase prosthetic limb push-off work and metabolic expenditure.

Design and optimization of a new integrated hip and knee prosthesis structure

BACKGROUND

Conventional hip disarticulation prostheses (HDPs) are passive devices with separate joint structures, limiting amputees' ability to control and resulting in abnormal gait patterns. This study introduces a new HDP integrating the hip and knee joints for amputees' natural gait.

METHODS

The new HDP restores the physiological rotation center of the hip with a remote center of motion (RCM) structure, and simulates the knee motion with a four-bar structure. Nonlinear programming was employed to optimize the hip-knee joint structure. A hybrid multi-objective drive structure with a series-parallel connection was also designed to ensure motion synergy between the hip and knee joints. Finally, a prototype of the prosthesis was tested using the HDP test system.

RESULTS

The optimization results demonstrate that the new HDP accurately restores the rotation center of the femur in amputees, with the knee's instantaneous center of rotation (ICR) trajectory closely resembling that of the human knee (Pearson correlation coefficient is 0.999). The study shows that the new HDP achieves a motion reproduction accuracy of over 95% for the human hip joint at walking speeds above 1.5 km/h, 38% higher than conventional prosthesis. Similarly, at the same walking speed, the new HDP replicates the motion of the human knee at 82.89%, surpassing conventional prosthesis by 57.85%.

CONCLUSIONS

The new HDP restores symmetry and replicates synergistic movement in amputees' lower limbs, exhibiting superior movement characteristics compared to conventional prostheses. This innovative HDP has the potential to enhance the quality of life for amputees.

[Motion analysis in lower limb exoprosthetics-possibilities and limitations]

BACKGROUND

Gait analysis is of high relevance in prosthetics as it is an essential part of the fitting process. The documentation of movement by means of videos and instrumented methods is becoming increasingly important in prosthetics as benefits of a complex prosthesis can best be shown by structured observation.

PROCEDURE

A movement analysis should always be preceded by an anamnesis and clinical examination in order to detect functional limitations of the examined person and thus to establish correlations to gait deviations. Additionally, the orthopaedic aid should be evaluated as well. In addition to walking on level ground, walking on everyday obstacles such as stairs and ramps is also of interest when observing people using prosthetic limbs. Functional tests can be used to determine the functional status more comprehensively. An instrumental-3D gait analysis is indicated for specific questions, especially regarding kinetic parameters.

Continuous relative phases of walking with an articulated passive ankle-foot prosthesis in individuals with a unilateral transfemoral and transtibial amputation: an explorative case-control study

BACKGROUND

A mechanical ankle-foot prosthesis (Talaris Demonstrator) was developed to improve prosthetic gait in people with a lower-limb amputation. This study aims to evaluate the Talaris Demonstrator (TD) during level walking by mapping coordination patterns based on the sagittal continuous relative phase (CRP).

METHODS

Individuals with a unilateral transtibial amputation, transfemoral amputation and able-bodied individuals completed 6 minutes of treadmill walking in consecutive blocks of 2 minutes at self-selected (SS) speed, 75% SS speed and 125% SS speed. Lower extremity kinematics were captured and hip-knee and knee-ankle CRPs were calculated. Statistical non-parametric mapping was applied and statistical significance was set at 0.05.

RESULTS

The hip-knee CRP at 75% SS walking speed with the TD was larger in the amputated limb of participants with a transfemoral amputation compared to able-bodied individuals at the beginning and end of the gait cycle (p = 0.009). In people with a transtibial amputation, the knee-ankle CRP at SS and 125% SS walking speeds with the TD were smaller in the amputated limb at the beginning of the gait cycle compared to able-bodied individuals (p = 0.014 and p = 0.014, respectively). Additionally, no significant differences were found between both prostheses. However, visual interpretation indicates a potential advantage of the TD over the individual's current prosthesis.

CONCLUSION

This study provides lower-limb coordination patterns in people with a lower-limb amputation and reveals a possible beneficial effect of the TD over the individuals' current prosthesis. Future research should include a well-sampled investigation of the adaptation process combined with the prolonged effects of the TD.

Sex Differences in Spatiotemporal Gait Parameters of Transtibial Amputees

Research addressing lower limb amputee gait and prosthetic design often focuses on men, despite female lower limb amputees having different risk factors and lower success with their prosthetics overall. It is widely agreed that sex differences exist in able-bodied gait, but research analyzing sex differences in amputee gait is rare. This study compared male and female transtibial amputee gait to ascertain potential sex differences. Forty-five transtibial amputees were asked to walk at their self-selected speed, and spatiotemporal gait data were obtained. Both the mean and variability metric of parameters were analyzed for 10 male and 10 female participants. For all participants, amputated limbs had a shorter stance time, longer swing time, and larger step length. Females had a 10% shorter stance time and 26% larger normalized step and stride length than males. Female participants also walked over 20% faster than male participants. Finally, significant interactions were found in the mean and variability metric of stride velocity, indicating greater variability in women. These findings suggest that sex differences exist in transtibial amputee gait, offering possible explanations for the different comorbidities experienced by female lower limb amputees. These results have major implications for female amputees and for sex-specific research, rehabilitation, and prosthetic design.

Therapeutic benefits of lower limb prostheses: a systematic review

BACKGROUND

Enhancing the quality of life of people with a lower limb amputation is critical in prosthetic development and rehabilitation. Yet, no overview is available concerning the impact of passive, quasi-passive and active ankle-foot prostheses on quality of life.

OBJECTIVE

To systematically review the therapeutic benefits of performing daily activities with passive, quasi-passive and active ankle-foot prostheses in people with a lower limb amputation.

METHODS

We searched the Pubmed, Web of Science, Scopus and Pedro databases, and backward citations until November 3, 2021. Only English-written randomised controlled trials, cross-sectional, cross-over and cohort studies were included when the population comprised individuals with a unilateral transfemoral or transtibial amputation, wearing passive, quasi-passive or active ankle-foot prostheses. The intervention and outcome measures had to include any aspect of quality of life assessed while performing daily activities. We synthesised the participants' characteristics, type of prosthesis, intervention, outcome and main results, and conducted risk of bias assessment using the Cochrane risk of bias tool. This study is registered on PROSPERO, number CRD42021290189.

RESULTS

We identified 4281 records and included 34 studies in total. Results indicate that quasi-passive and active prostheses are favoured over passive prostheses based on biomechanical, physiological, performance and subjective measures in the short-term. All studies had a moderate or high risk of bias.

CONCLUSION

Compared to passive ankle-foot prostheses, quasi-passive and active prostheses significantly enhance the quality of life. Future research should investigate the long-term therapeutic benefits of prosthetics devices.

Effects of a microprocessor-controlled ankle-foot unit on energy expenditure, quality of life, and postural stability in persons with transtibial amputation: An unblinded, randomized, controlled, cross-over study

BACKGROUND

Microprocessor-controlled prostheses are designed to improve mobility and quality of life through better balance and energy restoration in persons with transtibial amputation. Quasi-active microprocessor-controlled ankles (MPA) adapt to variable terrain by ankle angle adjustment.

OBJECTIVES

To compare energy expenditure, balance, quality of life, and satisfaction of Proprio-foot® (a quasi-active MPA model) with standard prescribed ankle prosthesis (prescribed ankle-foot units [PA]) (standard energy storage and return prosthesis).

STUDY DESIGN

Multicenter, unblinded, randomized, controlled, cross-over study.

METHODS

Energy expenditure (primary outcome) was assessed by oxygen uptake (VO2) measured at the maximum level reached with the 2 prostheses during treadmill walking at progressively increasing incline and speed. Balance was assessed by stabilometry in different static positions. Quality of life and satisfaction were assessed by "Short Form 36" questionnaire (0-100) and by Evaluation de la Satisfaction envers une Aide Technique (0-5) questionnaires after wearing each of the 2 prostheses for 34 days.

RESULTS

Forty-five patients tested the 2 prostheses. No statistical difference in VO2 was observed. Significant improvement of balance was observed both during standing on an incline or decline with MPA and PA (p < 0.01). Short Form 36 questionnaire physical scores and Short Form 36 questionnaire mental scores were 68.5 ± 19.5 vs. 62.1 ± 19.6 (p < 0.01) and 72.0 ± 20.8 vs. 66.2 ± 20.9 (p < 0.01) in MPA and PA, respectively. Evaluation de la Satisfaction envers une Aide Technique score on the device was not statistically significant between the 2 groups (MPA 4.4 ± 0.5 vs. PA 4.3 ± 0.5, p = 0.360).

CONCLUSION

Proprio-foot® improved balance, quality of life, and patient satisfaction despite no reduction or increase in energy expenditure in comparison with standard energy storage and return prosthesis.

Biomechanical accommodation to walking with an ankle-foot prosthesis: An exploratory analysis of novice users with transtibial limb loss within the first year of ambulation

BACKGROUND

The way in which a person with limb loss interacts with a prosthesis changes over time; however, there remains a lack of guidance for defining accommodation to walking with a prosthesis, limiting consistency and generalizability of research.

OBJECTIVE

To evaluate accommodations to walking with dynamic elastic response prosthetic ankle-foot devices among novice users with unilateral transtibial limb loss during the first year of ambulation.

STUDY DESIGN

This is a retrospective cohort study.

METHODS

Prosthetic and intact ankle-foot mechanical power profiles and mechanical work during step-to-step transitions were calculated using the Unified Deformable model for 22 male individuals with limb loss at five time points within the first year of independent ambulation (0, 2, 4, 6, and 12 months). Subjects walked at a self-selected walking velocity and controlled walking velocity (CWV). Subjective measures included the Prosthetic Evaluation Questionnaire and the 36-Item Short-Form Health Survey.

RESULTS

Self-selected walking velocity ranged from 1.24 ± 0.06 m/s at 0 month to 1.38 ± 0.04 m/s at 12 months, whereas CWV was 1.20 ± 0.02 m/s. At both velocities, positive work/peak power during prosthetic push-off trended upward until the 4-month time point. In addition, negative peak power during intact foot-strike seemed to qualitatively become less negative until 4 months. Positive work during intact push-off trended downward until 4 months at CWV, whereas positive peak power during intact push-off qualitatively became more positive at self-selected walking velocity.

CONCLUSIONS

These trends may partially indicate (biomechanical) accommodation to walking by appearance of a "plateau" at 4 months after initial ambulation with a prosthesis.

How does ankle power on the prosthetic side influence loading parameters on the sound side during level walking of persons with transfemoral amputation?

BACKGROUND

Increased ankle power on the prosthetic side seems to decrease biomechanical loading parameters on the sound side. This assumption is based on biomechanical comparisons of different foot constructions. However, such study designs could not show whether the amount of ankle power solely influences the sound side.

OBJECTIVE

To analyze the influence of divergent ankle power, resulting from different foot constructions and from different ankle power settings, on the sound side loading parameters.

STUDY DESIGN

Interventional cross sectional study.

METHODS

Level walking of transfemoral amputees with a microprocessor knee joint and Solid Ankle Cushioned Heel (SACH), energy storing and returning (ESR) and powered foot (PF) was analyzed. The PF was adapted in three configurations: without power (np), low power (lp), and optimal power (op). An optoelectronic camera system with 12 cameras and two force plates were used.

RESULTS

The ankle power on the prosthetic side shows significant differences about foot types and different settings of the PF. The knee adduction moment, the knee flexion moment, and the vertical ground reaction forces on the sound side were significantly reduced with PF_op and ESR in comparison to SACH. When analyzing these parameters for the different PF configurations, only some show significant results at normal velocity.

CONCLUSIONS

The additional positive mechanical work for an active push off in the PF tends to have a relieving effect. The biomechanical sound side loading parameters are reduced with PF_op in comparison to SACH and ESR, resulting in a relief of the sound side of lower limb amputees.

A novel pivot ankle/foot prosthesis reduces sound side loading and risk for osteoarthritis: a pragmatic randomized controlled trial

BACKGROUND

Individuals with unilateral transtibial amputation are at risk of abnormal mechanical joint loading and development of osteoarthritis on sound side joint structures.

OBJECTIVES

This study describes the spatiotemporal and kinetic and kinematic parameters related to osteoarthritis in participants while using (A) a solid-ankle cushioned-heel prosthesis (SACH), (B) a conventional energy storage and return (ESAR) foot prosthesis, and (C) a novel ESAR (N-ESAR) foot prosthesis.

STUDY DESIGN

A pragmatic randomized controlled trial.

METHODS

K3-K4 ambulators used three feet in a 2-week randomized cross-over order. Kinetics of vertical ground reaction forces (vGRFs) and 3D kinematics of joint angles were integrated to provide normalized parameters. Data were analyzed using one way and mixed model Analysis of variance (ANOVAs) (p < 0.05) and Cohen d statistic.

RESULTS

Twenty participants, aged 40 ± 16 years with body mass index of 24.7 ± 3.6 kg/m2, experienced minimal change in the spatiotemporal parameters between feet. Participants using the N-ESAR foot prosthesis experienced reduced peak knee external adduction moment (p = 0.030), peak vGRFs (p < 0.001), and peak loading rate of vGRFs (p = 0.030). Peak knee flexion moments only changed when using the solid-ankle cushioned-heel prosthesis, in a positive direction (p = 0.014). Using the N-ESAR prosthesis also increased peak distal shank power during late stance phase (p < 0.001).

CONCLUSIONS

A novel ankle/foot ESAR prosthesis reduces loading on the sound side. With extended use of the N-ESAR foot prosthesis, these findings may provide the prosthesis user with improved outcomes related to sound side loading and development of osteoarthritis.

Evaluation of an articulated passive ankle-foot prosthesis

Background

Current ankle prostheses for people with unilateral transtibial amputation (TTA) or transfemoral amputation (TFA) are unable to mimic able-bodied performance during daily activities. A new mechanical ankle–foot prosthesis was developed to further optimise the gait of people with a lower-limb amputation. This study aimed to evaluate the Talaris Demonstrator (TD) during daily activities by means of performance-related, physiological and subjective outcome measures.

Materials and methods

Forty-two participants completed a protocol assessing performance and functional mobility with their current prosthesis and the TD. The protocol comprised the L-test, 2 min of stair climbing, 2 min of inclined treadmill walking, 6 min of treadmill walking at 3 different speeds in consecutive blocks of 2 min, and a 3-m Backward Walk test (3mBWT). Heart rate was measured during each task, and oxygen uptake was collected during all tasks except for the L-test and 3mBWT. Time of execution was recorded on the L-test and 3mBWT, and the rate of perceived exertion (score = 6–20), fatigue and comfort (score = 0–100) were assessed after each task. Paired sample t-tests and Wilcoxon Signed-rank tests were performed to compare outcomes between prosthetic devices. Benjamini–Hochberg corrections were applied to control for multiple comparisons with a level of significance set at α = 0.05.

Results

Subjects with a TTA (N = 28) were faster with their current prosthesis compared to the TD on the L-test and 3mBWT (p = 0.005). In participants with a TFA (N = 14), we observed a tendency towards a higher heart rate during the L-test and towards increased comfort during inclined walking, with the TD compared to the participants’ current prosthetic device (0.05 < p < 0.10). Further, no significant results were observed.

Conclusion

The Talaris Demonstrator is a novel state-of-the-art passive ankle–foot prosthesis for both people with a TTA and TFA. Subjective measures indicate the added value of this device, while overall task performance and intensity of effort do not differ between the Talaris Demonstrator and the current prosthesis. Further investigations unravelling both acute and more prolonged adaptations will be conducted to evaluate the TD more thoroughly.

Biomechanical evaluation over level ground walking of user-specific prosthetic feet designed using the lower leg trajectory error framework

The walking pattern and comfort of a person with lower limb amputation are determined by the prosthetic foot’s diverse set of mechanical characteristics. However, most design methodologies are iterative and focus on individual parameters, preventing a holistic design of prosthetic feet for a user’s body size and walking preferences. Here we refined and evaluated the lower leg trajectory error (LLTE) framework, a novel quantitative and predictive design methodology that optimizes the mechanical function of a user’s prosthesis to encourage gait dynamics that match their body size and desired walking pattern. Five people with unilateral below-knee amputation walked over-ground at self-selected speeds using an LLTE-optimized foot made of Nylon 6/6, their daily-use foot, and a standardized commercial energy storage and return (ESR) foot. Using the LLTE feet, target able-bodied kinematics and kinetics were replicated to within 5.2% and 13.9%, respectively, 13.5% closer than with the commercial ESR foot. Additionally, energy return and center of mass propulsion work were 46% and 34% greater compared to the other two prostheses, which could lead to reduced walking effort. Similarly, peak limb loading and flexion moment on the intact leg were reduced by an average of 13.1%, lowering risk of long-term injuries. LLTE-feet were preferred over the commercial ESR foot across all users and preferred over the daily-use feet by two participants. These results suggest that the LLTE framework could be used to design customized, high performance ESR prostheses using low-cost Nylon 6/6 material. More studies with large sample size are warranted for further verification.

Calculated functional joint center positions are highly variable in individuals with unilateral transtibial amputation walking with identical prosthetic ankle-foot devices

BACKGROUND

Biomechanical modeling of the lower limbs, including prosthetic componentry, makes a number of assumptions that influence the data obtained and their subsequent interpretation. Calculated prosthetic ankle functional joint center (FJC) positions vary between devices and have been suggested as a possible method of comparing device function.

OBJECTIVES

The study aimed to assess the variability of joint center position estimates, calculated using an FJC methodology, in all three planes. This was assessed in participants with unilateral transtibial amputation using an identical prosthetic ankle-foot device during walking on a flat surface.

STUDY DESIGN

Case series.

TECHNIQUE

Three-dimensional motion capture recorded the position of markers placed on the shank and ankle-foot device of five individuals with unilateral transtibial amputation, as they completed 10 trials of level walking using the same ankle-foot device. The FJC between the prosthetic foot and shank segments were calculated for each trial.

RESULTS

The calculated FJC positions were highly variable across individual participants and within each individual. This variability was observed across all three planes of movement and resulted in calculated joint center positions created beyond the physical boundaries of the prosthetic device.

CONCLUSIONS

Biomechanical data are affected by lower limb and prosthetic device modeling assumptions. Definition of a prosthetic "ankle" joint using an FJC method results in highly variable "ankle" joint center positions when applied to a prosthetic ankle-foot device. Their use should be discouraged to avoid misleading interpretations of data.

Benefits of a microprocessor-controlled prosthetic foot for ascending and descending slopes

BACKGROUND

Prosthetic feet are prescribed for persons with a lower-limb amputation to restore lost mobility. However, due to limited adaptability of their ankles and springs, situations like walking on slopes or uneven ground remain challenging. This study investigated to what extent a microprocessor-controlled prosthetic foot (MPF) facilitates walking on slopes.

METHODS

Seven persons each with a unilateral transtibial amputation (TTA) and unilateral transfemoral amputation (TFA) as well as ten able-bodied subjects participated. Participants were studied while using a MPF and their prescribed standard feet with fixed ankle attachments. The study investigated ascending and descending a 10° slope. Kinematic and kinetic data were recorded with a motion capture system. Biomechanical parameters, in particular leg joint angles, shank orientation and external joint moments of the prosthetics side were calculated.

RESULTS

Prosthetic feet- and subject group-dependent joint angle and moment characteristics were observed for both situations. The MPF showed a larger and situation-dependent ankle range of motion compared to the standard feet. Furthermore, it remained in a dorsiflexed position during swing. While ascending, the MPF adapted the dorsiflexion moment and reduced the knee extension moment. At vertical shank orientation, it reduced the knee extension moment by 26% for TFA and 49% for TTA compared to the standard feet. For descending, differences between feet in the biomechanical knee characteristics were found for the TTA group, but not for the TFA group. At the vertical shank angle during slope descent, TTA demonstrated a behavior of the ankle moment similar to able-bodied controls when using the MPF.

CONCLUSIONS

The studied MPF facilitated walking on slopes by adapting instantaneously to inclinations and, thus, easing the forward rotation of the leg over the prosthetic foot compared to standard feet with a fixed ankle attachment with amputation-level dependent effect sizes. It assumed a dorsiflexed ankle angle during swing, enabled a larger ankle range of motion and reduced the moments acting on the residual knee of TTA compared to the prescribed prosthetic standard feet. For individuals with TFA, the prosthetic knee joint seems to play a more crucial role for walking on ramps than the foot.

Transtibial limb loss does not increase metabolic cost in three-dimensional computer simulations of human walking

Loss of a lower limb below the knee, i.e., transtibial limb loss, and subsequently walking with a prosthesis, is generally thought to increase the metabolic cost of walking vs. able-bodied controls. However, high-functioning individuals with limb loss such as military service members often walk with the same metabolic cost as controls. Here we used a 3-D computer model and optimal control simulation approach to test the hypothesis that transtibial limb loss in and of itself causes an increase in metabolic cost of walking. We first generated N = 36 simulations of walking at 1.45 m/s using a “pre-limb loss” model, with two intact biological legs, that minimized deviations from able-bodied experimental walking mechanics with minimum muscular effort. We then repeated these simulations using a “post-limb loss” model, with the right leg’s ankle muscles and joints replaced with a simple model of a passive transtibial prosthesis. No other changes were made to the post-limb loss model’s remaining muscles or musculoskeletal parameters compared to the pre-limb loss case. Post-limb loss, the gait deviations on average increased by only 0.17 standard deviations from the experimental means, and metabolic cost did not increase (3.58 ± 0.10 J/m/kg pre-limb loss vs. 3.59 ± 0.12 J/m/kg post-limb loss, p = 0.65). The results suggest that transtibial limb loss does not directly lead to an increase in metabolic cost, even when deviations from able-bodied gait mechanics are minimized. High metabolic costs observed in individuals with transtibial limb loss may be due to secondary changes in strength or general fitness after limb loss, modifiable prosthesis issues, or to prioritization of factors that affect locomotor control other than gait deviations and muscular effort.

Functional performance differences between carbon fiber and fiberglass prosthetic feet

BACKGROUND

Persons with lower limb amputation require increased functionality. The largest category of feet for active individuals with a transtibial amputation is energy storage and return (ESR) feet. These feet are typically constructed of carbon fiber composite materials. Recently, a prosthetic foot composed of a fiberglass composite has emerged in the market. However, there are no comparative studies of these devices.

OBJECTIVES

Compare the biomechanical performance and prosthesis-related quality of life when using a fiberglass prosthetic foot design compared with traditional carbon fiber ESR designs.

STUDY DESIGN

This is a repeated-measures randomized cross-over trial.

METHODS

Gait analysis was performed on 10 experienced male subjects with unilateral transtibial amputations (K-level III) while walking on level ground and a ramp. Patient-reported outcomes were collected using the Prosthesis Evaluation Questionnaire.

RESULTS

Gait data demonstrated increased ankle dorsiflexion (P < .01), similar ankle moments (P = .07), and increased ankle power generation (P = .01) when using the fiberglass foot. The increased power generation occurred at the correct time in the gait cycle such that the timing and magnitude of peak knee flexion was unaffected (P > .19). The fiberglass foot had greater energy absorption during gait (P = .01) with no difference in energy return (P = .37). The subjects expressed improved prosthesis-related quality of life with the fiberglass foot (P = .01).

CONCLUSIONS

The findings of this study demonstrate that the new ESR foot comprising a fiberglass material had better performance than traditional designs using a carbon fiber material.

Biomechanical design framework for prosthetic feet: Experimentally validated non-linear finite element procedure

Performance evaluation of prosthetic feet during their design is typically performed experimentally, which may be time and cost intensive. This work presents a first-of-its-kind application of a numerical procedure for the a priori determination of various stance phase biomechanical parameters of a prosthetic foot, such as its roll-over characteristics, centre of pressure trajectory, ankle flexion moment arm and ankle range of motion, to aid in its design. The numerical procedure is based on finite element analysis, which includes geometric, material and contact non-linearity. Boundary conditions emulating the rocker-based inverted pendulum model were employed to evaluate the biomechanical parameters. The finite element model was validated by employing an inverted pendulum-based apparatus using the structurally complex Ottobock Solid Ankle Cushioned Heel (SACH) prosthetic foot as the test device. A comparison of the numerical and experimental results showed low magnitude of errors. For example, the percentage error of the radius of curvature of the roll-over shape was ~0.1%. The differences found appear to be clinically insignificant, which substantiates the reliability of the model. The proposed numerical model can be employed to obtain detailed a priori insights into the biomechanical parameters influencing a prosthetic foot's characteristics during gait, which can better inform the design, analysis and prescription of prosthetic feet.

Effects on ankle power and sound limb load with an active prosthetic foot

The performance of conventional prosthetic feet depends on material and construction principles. Certain powered feet can even generate net positive mechanical work in order to provide an active push-off. The aim of this study was to evaluate the influence of ankle power on the gait of transfemoral amputees. For this purpose level walking of six transfemoral amputees was analysed with a basic and an active foot and three different power settings of the latter. The results show clear advantages of the active foot in comparison with a basic foot. However, a strong relation of the sound side knee loading parameters with the varied ankle power outputs of the active foot couldn’t be shown.

Use of Dynamic FEA for Design Modification and Energy Analysis of a Variable Stiffness Prosthetic Foot

Different tasks and conditions in gait call for different stiffness of prosthetic foot devices. The following work presents a case study on design modifications of a prosthetic foot, aimed at variable stiffness of the device. The objective is a proof-of-concept, achieved by simulating the modifications using finite element modeling. Design changes include the addition of a controlled damping element, connected both in parallel and series to a system of springs. The aim is to change the stiffness of the device under dynamic loading, by applying a high damping constant, approaching force coupling for the given boundary conditions. The dynamic modelling simulates mechanical test methods used to measure load response in full roll-over of prosthetic feet. Activation of the element during loading of the foot justifies the damped effect. As damping is in contrast to the main design objectives of energy return in prosthetic feet, it is considered important to quantify the dissipated energy in such an element. Our design case shows that the introduction of a damping element, with a high damping constant, can increase the overall rotational stiffness of the device by 50%. Given a large enough damping coefficient, the energy dissipation in the active element is about 20% of maximum strain energy.

Prosthetic push-off power in trans-tibial amputee level ground walking: A systematic review

OBJECTIVE

Unilateral trans-tibial amputation signifies a challenge to locomotion. Prosthetic ankle-foot units are developed to mimic the missing biological system which adapts push-off power to walking speed in some new prosthetic ankle-foot designs. The first systematic review including the two factors aims to investigate push-off power differences among Solid Ankle Cushion Heel (SACH), Energy Storage And Return (ESAR) and Powered ankle-foot units (PWR) and their relation to walking speed.

DATA SOURCES

A literature search was undertaken in the Web of Science, PubMed, IEEE xplore, and Google Scholar databases. The search term included: ampu* AND prosth* AND ankle-power AND push-off AND walking.

STUDY APPRAISAL AND SYNTHESIS METHODS

Studies were included if they met the following criteria: unilateral trans-tibial amputees, lower limb prosthesis, reported analysis of ankle power during walking. Data extracted from the included studies were clinical population, type of the prosthetic ankle-foot units (SACH, ESAR, PWR), walking speed, and peak ankle power. Linear regression was used to determine whether the push-off power of different prosthetic ankle-foot units varied regarding walking speed. Push-off power of the different prosthetic ankle-foot units were compared using one-way between subjects' ANOVAs with post hoc analysis, separately for slower and faster walking speeds.

RESULTS

474 publications were retrieved, 28 of which were eligible for inclusion. Correlations between walking speed and peak push-off power were found for ESAR (r = 0.568, p = 0.006) and PWR (r = 0.820, p = 0.000) but not for SACH (r = 0.267, p = 0.522). ESAR and PWR demonstrated significant differences in push-off power for slower and faster walking speeds (ESAR (p = 0.01) and PWR (p = 0.02)).

CONCLUSION

Push-off power can be used as a selection criterion to differentiate ankle-foot units for prosthetic users and their bandwidth of walking speeds.