The functional, spatio-temporal and satisfaction outcomes of transtibial amputees with a hydrocast socket following an extended usage period in an under-resourced environment

Investigation of Orthopedic Prosthesis Socket Management after Transfemoral Amputation by Expert Survey

Prosthesis treatment requires the close interaction of different actors. In fitting prostheses to patients, special attention is given to the manufacturing of the socket. The continuous development of the technologies involved in the fitting and optimization of prostheses is shown in the literature. The assessment of orthopedic technicians and their influence in the process is thus far largely unexplored. Ten orthopedic technicians were interviewed about the socket fitting process after transfemoral amputation. The research goal was to clarify the socket treatment process with regards to the German context. The results showed that the orthopedic technicians focussing on the patient during the fitting process. This study underlines the importance of interaction and empathy. Volume fluctuations are decisive within the treatment process and are interactively influenced by various factors. Furthermore, the research emphasizes the need for appropriate assistive technologies and the potential for the further development of existing systems.

Pioneering low-cost 3D-printed transtibial prosthetics to serve a rural population in Sierra Leone - an observational cohort study

BACKGROUND

There is a huge unmet global need for affordable prostheses. Amputations often happen in Sierra Leone due to serious infections, complex wounds, traffic accidents and delayed patient presentation to the hospital. However, purchasing a prosthesis is still beyond reach for most Sierra Leonean amputees.

METHOD

We applied computer-aided design (CAD) and computer-aided manufacturing (CAM) to produce low-cost transtibial prosthetic sockets. In February and March 2020, eight participants received a 3D printed transtibial prosthesis in the village of Masanga in Tonkolili district, Sierra Leone. Research was performed using questionnaires to investigate the use, participants' satisfaction, and possible complications related to the prostheses. Questionnaires were conducted prior to production of the prosthesis and five to six weeks after fitting the prosthesis. A personal short-term goal was set by the participants.

FINDINGS

Competitively priced and fully functional prostheses were produced locally. After six weeks, all participants were still wearing the prosthesis and six of the eight participants reached their personal rehabilitation goals. Using their prostheses, all participants were no longer in need of their crutches.

INTERPRETATION

We have come a step closer to the production of low-cost prostheses for low-and middle-income countries (LMICs). The goal of our project is to perform long-term follow-up and to refine our concept of 3D printed prostheses for LMICs to provide practical solutions for a global health need unmet to date.

FUNDING

€ 15,000 was collected during a crowdfunding campaign in collaboration with the Dutch Albert Schweitzer Fund. Internship allowance for MvdS was obtained from the University of Twente. 3D-scanner, 3D-printer, and printing material were donated by Ultimaker BV and Shining 3D.

Lower limb prosthetic interfaces: Clinical and technological advancement and potential future direction

The human-prosthesis interface is one of the most complicated challenges facing the field of prosthetics, despite substantive investments in research and development by researchers and clinicians around the world. The journal of the International Society for Prosthetics and Orthotics, Prosthetics and Orthotics International, has contributed substantively to the growing body of knowledge on this topic. In celebrating the 50th anniversary of the International Society for Prosthetics and Orthotics, this narrative review aims to explore how human-prosthesis interfaces have changed over the last five decades; how research has contributed to an understanding of interface mechanics; how clinical practice has been informed as a result; and what might be potential future directions. Studies reporting on comparison, design, manufacturing and evaluation of lower limb prosthetic sockets, and osseointegration were considered. This review demonstrates that, over the last 50 years, clinical research has improved our understanding of socket designs and their effects; however, high-quality research is still needed. In particular, there have been advances in the development of volume and thermal control mechanisms with a few designs having the potential for clinical application. Similarly, advances in sensing technology, soft tissue quantification techniques, computing technology, and additive manufacturing are moving towards enabling automated, data-driven manufacturing of sockets. In people who are unable to use a prosthetic socket, osseointegration provides a functional solution not available 50 years ago. Furthermore, osseointegration has the potential to facilitate neuromuscular integration. Despite these advances, further improvement in mechanical features of implants, and infection control and prevention are needed.

Predictive prosthetic socket design: part 2-generating person-specific candidate designs using multi-objective genetic algorithms

In post-amputation rehabilitation, a common goal is to return to ambulation using a prosthetic limb, suspended by a customised socket. Prosthetic socket design aims to optimise load transfer between the residual limb and mechanical limb, by customisation to the user. This is a time-consuming process, and with the increase in people requiring these prosthetics, it is vital that these personalised devices can be produced rapidly while maintaining excellent fit, to maximise function and comfort. Prosthetic sockets are designed by capturing the residual limb’s shape and applying a series of geometrical modifications, called rectifications. Expert knowledge is required to achieve a comfortable fit in this iterative process. A variety of rectifications can be made, grouped into established strategies [e.g. in transtibial sockets: patellar tendon bearing (PTB) and total surface bearing (TSB)], creating a complex design space. To date, adoption of advanced engineering solutions to support fitting has been limited. One method is numerical optimisation, which allows the designer a number of likely candidate solutions to start the design process. Numerical optimisation is commonly used in many industries but not prevalent in the design of prosthetic sockets. This paper therefore presents candidate shape optimisation methods which might benefit the prosthetist and the limb user, by blending the state of the art from prosthetic mechanical design, surrogate modelling and evolutionary computation. The result of the analysis is a series of prosthetic socket designs that preferentially load and unload the pressure tolerant and intolerant regions of the residual limb. This spectrum is bounded by the general forms of the PTB and TSB designs, with a series of variations in between that represent a compromise between these accepted approaches. This results in a difference in pressure of up to 31 kPa over the fibula head and 14 kPa over the residuum tip. The presented methods would allow a trained prosthetist to rapidly assess these likely candidates and then to make final detailed modifications and fine-tuning. Importantly, insights gained about the design should be seen as a compliment, not a replacement, for the prosthetist’s skill and experience. We propose instead that this method might reduce the time spent on the early stages of socket design and allow prosthetists to focus on the most skilled and creative tasks of fine-tuning the design, in face-to-face consultation with their client.