Biomechanical effects of three types of foot orthoses in individuals with posterior tibial tendon dysfunction

Exploring the relationship between the supination resistance test and the effects of foot orthoses on the foot and ankle biomechanics during walking

BACKGROUND

The effects of foot orthoses on lower limb biomechanics during walking have been studied extensively. However, the lack of knowledge regarding the effects of various foot orthoses models for the same population complicates model selection in clinical practice and research. Additionally, there is a critical need to enhance our ability to predict the outcomes of foot orthoses using clinical tests, such as the supination resistance test.

RESEARCH QUESTION

What are the effects of two commonly prescribed types of FO (thin-flexible and medially wedged) on lower limb biomechanics during gait? Is there a correlation on these effects with the results of the supination resistance test?

METHODS

Twenty-three participants with flat feet were enrolled in this cross-sectional descriptive study. Participants underwent walking trials under three conditions: shod, thin-flexible FOs and medially wedged FOs. Midfoot, ankle, knee and hip angles, moments were calculated. Repeated measure ANOVAs were employed for within-group comparison across conditions. Correlations between the effects of FOs on foot and ankle angles/moments and supination resistance were determined using regression analyses using a statistical parametric mapping approach.

RESULTS

Thin-flexible and medially wedged FOs reduced midfoot dorsiflexion angles and ankle inversion moments. Medially wedged FOs also decreased midfoot and ankle abduction angles, midfoot plantarflexion moments compared to thin-flexible FOs and shoes. Moderate to good correlations between the supination resistance test and the medially wedged FOs were observed for the frontal and transverse ankle angles and moments.

SIGNIFICANCE

Medially wedged FOs are more effective in modifying lower limb biomechanics during walking compared to thin-flexible FOs. Greater supination resistance was associated with more pronounced effects for medially wedged FOs on foot and ankle biomechanics. These findings hold promise for refining orthotic prescription strategies, potentially offering advantages to individuals with musculoskeletal disorders.

Lower limbs biomechanical deficits associated with stage 1 and 2 posterior tibialis tendon dysfunction during walking

BACKGROUND

Posterior tibialis tendon dysfunction (PTTD) is a chronic degenerative musculoskeletal disorder causing a progressive ankle complex and arch collapse altering lower limb biomechanics. However, biomechanical changes associated with stage 1 and 2 PTTD need to be better characterized during walking to guide clinical recommendations and improve non-operative treatments.

RESEARCH QUESTION

What are the lower limb kinematic and kinetic differences between individuals with stage 1 (PTTD1), individuals with stage 2 PTTD (PTTD2) and healthy counterparts during gait?

METHODS

Sixteen PTTD1, 11 PTTD2 and 20 healthy controls were included in this multicentric case-control study to compare their lower limb gait biomechanics. Kinematic and kinetic data were recorded using a three-dimensional motion capture system and a force plate. One-dimensional statistical parametric mapping was used to compare lower limb joint motion and moments between groups during the stance phase.

RESULTS

PTTD1 had minimal biomechanical differences compared with the control group. In contrast, PTTD2 presented significant differences compared with controls and PTTD1. At the ankle, PTTD2 exhibited greater plantarflexion and eversion angles and midfoot dorsiflexion and inversion angles throughout stance compared with controls and PTTD1. PTTD2 presented lower midfoot abduction moments compared with controls. These changes led PTTD2 to exhibit knee and hip adaptative biomechanical mechanisms in the frontal and transverse planes in late stance. PTTD2 had greater knee internal rotation angles and smaller knee external rotation moments compared to controls. PTTD2 had smaller hip internal rotation angles compared with PTTD1 and smaller hip adduction moments compared with controls.

SIGNIFICANCE

PTTD1 showed minimal biomechanical differences compared to controls and important differences compared to PTTD2. The lower limb biomechanical deficits accentuate as the pathology advances from stage 1 to stage 2. PTTD is a progressive condition needing early clinical management at stage 1 to avoid successive biomechanical changes associated with stage 2.

Biomechanical Effect on Jack's Test on Barefoot Position, Regular Socks, and Biomechanics Socks

The proper dorsal flexion movement of the first metatarsophalangeal joint (MTPJ) is crucial for an accurate gait. Restricted movement can disrupt the windlass mechanism, and Jack's test is a tool to assess such alterations. Although running socks are commonly used, their influence on the windlass mechanism remains unclear. Therefore, the aim of this study was to measure the resistance to passive dorsal flexion of the first metatarsophalangeal joint (MTPJ) under three different conditions: barefoot, wearing regular socks, and wearing biomechanical socks, using a digital force gauge.

METHODS

The research involved a sample size of 30 subjects (14 men and 16 women), and Jack's test was conducted using a digital force gauge and a lever system. Three conditions were measured, barefoot, with a regular sock, and with the biomechanical socks.

RESULTS

Statistically significant differences were observed when using biomechanical socks with orthopedic corrections during Jack's test, as measured with the digital force gauge (13.33 N ± 3.54, p < 0.001).

CONCLUSIONS

The utilization of biomechanical socks with a kinetic wedge, reinforced mesh in the medial longitudinal arch, and padding in the heel area results in a reduction of the force required, measured in newtons, to perform dorsal flexion of the first metatarsophalangeal joint (MTPJ) during Jack's test compared to being barefoot or wearing regular socks.

Medially wedged foot orthoses generate greater biomechanical effects than thin-flexible foot orthoses during a unilateral drop jump task on level and inclined surfaces

BACKGROUND

Foot orthoses are therapeutic insoles designed to induce various effects on lower limb biomechanics. However, conflicting findings in previous research, highlight the need to better understand how foot orthoses with different features affect lower limb biomechanics during challenging tasks, particularly during unilateral drop jump landings.

METHODS

Seventeen participants with flat feet were recruited to participate in this cross-sectional descriptive study that examined the effects of thin-flexible foot orthoses and medially wedged foot orthoses on lower limb biomechanics during unilateral drop jump landings on level and valgus inclined surfaces. Midfoot, ankle, knee, and hip angles and moments were calculated and compared across conditions with repeated measures ANOVAs, using a statistical parametric mapping approach.

FINDINGS

Medially wedged and thin-flexible foot orthoses reduced ankle pronation and arch flattening during unilateral drop jump landings on level and valgus inclined surfaces. Medially wedged foot orthoses further decreased midfoot dorsiflexion and ankle eversion angles compared to thin-flexible foot orthoses. Medially wedged foot orthoses also generated greater effects on ankle kinetics and hip kinematics during unilateral drop jump landings.

INTERPRETATION

Medially wedged foot orthoses are more effective than thin-flexible foot orthoses in optimizing lower limb biomechanics during unilateral drop jump landings. While the biomechanical effects did not increase on inclined surfaces, medially wedged foot orthoses generated greater effects on proximal joints, highlighting their potential to improve hip stability and enhance overall lower limb function. Personalized foot orthoses selection based on specific biomechanical profiles should be further explored to optimize orthotic interventions benefiting individuals with musculoskeletal conditions.

Supination resistance variations in foot and ankle musculoskeletal disorders: implications for diagnosis and customised interventions with wedged insoles

BACKGROUND

Supination resistance is a clinical outcome that estimates the amount of external force required to supinate the foot. A greater supination resistance may indicate greater loads on structures responsible for generating internal supination moments across the subtalar joint during static and dynamic tasks. As such, greater supination resistance may be an expected finding in medial foot and ankle musculoskeletal disorders, such as plantar fasciopathy (PF) and posterior tibial tendon dysfunction (PTTD), whereas reduced supination resistance may be present in lateral ankle disorders, such as chronic ankle instability (CAI). However, no studies have yet investigated the changes in supination resistance across these foot and ankle musculoskeletal disorders. This study aimed to quantify supination resistance in individuals with PF, PTTD and CAI compared to healthy controls. Additionally, this study aimed to explore the changes in supination resistance following the simulation of varus and valgus wedges, which are commonly used interventions for these disorders.

METHODS

Fourteen participants with PF, fourteen with PTTD, fourteen with CAI and fourteen healthy controls were recruited. Supination resistance was quantified on a level surface and on a 10-degree inclined surface with varus and valgus positions.

RESULTS

Supination resistance was lower for the injured foot for CAI (p < 0.001) and greater for PTTD (p < 0.001) compared to the healthy foot. There was no significant between-foot difference observed for PF (p = 0.275) and controls (p = 0.970). In the injured foot, CAI exhibited lower supination resistance compared to controls (p < 0.001), PF (p = 0.012) and PTTD (p = 0.014). Regardless of the groups, supination resistance increased when tested on a surface with valgus inclination (p < 0.001) and decreased when tested on a surface with varus inclination (p < 0.001).

CONCLUSIONS

Varus and valgus inclinations to the surface were effective in modifying supination resistance in PTTD and CAI, respectively. Supination resistance seemed unchanged in PF, and thus inclining the standing surface leads to greater between-feet asymmetries. This study also highlights the potential of wedged insoles as a mean to customise treatments and modify tissue stresses in these disorders. The findings contribute to the understanding of foot and ankle biomechanics and may aid in the development of more effective management and rehabilitation strategies.

Foot Sole Contact Forces vs. Ground Contact Forces to Obtain Foot Joint Moments for In-Shoe Gait-A Preliminary Study

In-shoe models are required to extend the clinical application of current multisegment kinetic models of the bare foot to study the effect of foot orthoses. Work to date has only addressed marker placement for reliable kinematic analyses. The purpose of this study is to address the difficulties of recording contact forces with available sensors. Ten participants walked 5 times wearing two different types of footwear by stepping on a pressure platform (ground contact forces) while wearing in-shoe pressure sensors (foot sole contact forces). Pressure data were segmented by considering contact cells' anteroposterior location, and were used to compute 3D moments at foot joints. The mean values and 95% confidence intervals were plotted for each device per shoe condition. The peak values and times of forces and moments were computed per participant and trial under each condition, and were compared using mixed-effect tests. Test-retest reliability was analyzed by means of intraclass correlation coefficients. The curve profiles from both devices were similar, with higher joint moments for the instrumented insoles at the metatarsophalangeal joint (~26%), which were lower at the ankle (~8%) and midtarsal (~15%) joints, although the differences were nonsignificant. Not considering frictional forces resulted in ~20% lower peaks at the ankle moments compared to previous studies, which employed force plates. The device affected both shoe conditions in the same way, which suggests the interchangeability of measuring joint moments with one or the other device. This hypothesis was reinforced by the intraclass correlation coefficients, which were higher for the peak values, although only moderate-to-good. In short, both considered alternatives have drawbacks. Only the instrumented in-soles provided direct information about foot contact forces, but it was incomplete (evidenced by the difference in ankle moments between devices). However, recording ground reaction forces offers the advantage of enabling the consideration of contact friction forces (using force plates in series, or combining a pressure platform and a force plate to estimate friction forces and torque), which are less invasive than instrumented insoles (which may affect subjects' gait).

Thick shells and medially wedged posts increase foot orthoses medial longitudinal arch stiffness: an experimental study

BACKGROUND

Foot orthoses (FOs) are commonly prescribed devices to attenuate biomechanical deficits and improve physical function in patients with musculoskeletal disorders. It is postulated that FOs provide their effects through the production of reaction forces at the foot-FOs interface. An important parameter to provide these reaction forces is their medial arch stiffness. Preliminary results suggest that adding extrinsic additions to FOs (e.g., rearfoot posts) increases their medial arch stiffness. A better understanding of how FOs medial arch stiffness can be modulated by changing structural factors is necessary to better customise FOs for patients. The objectives of this study were to compare FOs stiffness and force required to lower the FOs medial arch in three thicknesses and two models (with and without medially wedged forefoot-rearfoot posts).

METHODS

Two models of FOs, 3D printed in Polynylon-11, were used: (1) without extrinsic additions (mFO), and (2) with forefoot-rearfoot posts and a 6^o medial wedge (FO6MW). For each model, three thicknesses (2.6 mm, 3.0 mm, and 3.4 mm) were manufactured. FOs were fixed to a compression plate and vertically loaded over the medial arch at a rate of 10 mm/minute. Two-way ANOVAs and Tukey post-hoc tests with Bonferroni corrections were used to compare medial arch stiffness and force required to lower the arch across conditions.

RESULTS

Regardless of the differing shell thicknesses, the overall stiffness was 3.4 times greater for FO6MW compared to mFO (p < 0.001). FOs with 3.4 mm and 3.0 mm thicknesses displayed 1.3- and 1.1- times greater stiffness than FOs with a thickness of 2.6 mm. FOs with a thickness of 3.4 mm also exhibited 1.1 times greater stiffness than FOs with a thickness of 3.0 mm. Overall, the force to lower the medial arch was up to 3.3 times greater for FO6MW than mFO and thicker FOs required greater force (p < 0.001).

CONCLUSIONS

An increased medial longitudinal arch stiffness is seen in FOs following the addition of 6^o medially inclined forefoot-rearfoot posts, and when the shell is thicker. Overall, adding forefoot-rearfoot posts to FOs is significantly more efficient than increasing shell thickness to enhance these variables should that be the therapeutic aim.

Characteristics and Future Direction of Tibialis Posterior Tendinopathy Research: A Scoping Review

Background and Objectives: Tibialis posterior tendon pathologies have been traditionally categorized into different stages of posterior tibial tendon dysfunction (PTTD), or adult acquired flatfoot deformity (AAFD), and more recently to progressive collapsing foot deformity (PCFD). The purpose of this scoping review is to synthesize and characterize literature on early stages of PTTD (previously known as Stage I and II), which we will describe as tibialis posterior tendinopathy (TPT). We aim to identify what is known about TPT, identify gaps in knowledge on the topics of TPT, and propose future research direction. Materials and Methods: We included 44 studies and categorized them into epidemiology, diagnosis, evaluation, biomechanics outcome measure, imaging, and nonsurgical treatment. Results: A majority of studies (86.4%, 38 of 44 studies) recruited patients with mean or median ages greater than 40. For studies that reported body mass index (BMI) of the patients, 81.5% had mean or median BMI meeting criteria for being overweight. All but two papers described study populations as predominantly or entirely female gender. Biomechanical studies characterized findings associated with TPT to include increased forefoot abduction and rearfoot eversion during gait cycle, weak hip and ankle performance, and poor balance. Research on non-surgical treatment focused on orthotics with evidence mostly limited to observational studies. The optimal exercise regimen for the management of TPT remains unclear due to the limited number of high-quality studies. Conclusions: More epidemiological studies from diverse patient populations are necessary to better understand prevalence, incidence, and risk factors for TPT. The lack of high-quality studies investigating nonsurgical treatment options is concerning because, regardless of coexisting foot deformity, the initial treatment for TPT is typically conservative. Additional studies comparing various exercise programs may help identify optimal exercise therapy, and investigation into further nonsurgical treatments is needed to optimize the management for TPT.

Construction and Simulation of Biomechanical Model of Human Hip Joint Muscle-Tendon Assisted by Elastic External Tendon by Hill Muscle Model

Based on the Hill muscle model (HMM), a biomechanical model of human hip muscle tendon assisted by elastic external tendon (EET) was preliminarily established to investigate and analyze the biomechanical transition between the hip joint (HJ) and related muscle tendons. Using the HMM, the optimal muscle fiber length and muscle force scaling variables were introduced by means of constrained optimization problems and were optimized. The optimized HMM was constructed with human parameters of 170 cm and 70 kg. The biomechanical model simulation test of the hip muscle tendon was performed in the automatic dynamic analysis of mechanical systems (ADAMS) software to analyze and optimize the changes in the root mean square error (RMSE), biological moment, muscle moment distribution coefficient (MDC), muscle moment, muscle force, muscle power, and mechanical work of the activation curves of the hip major muscle, iliopsoas muscle, rectus femoris muscle, and hamstring muscle under analyzing the optimized HMM and under different EET auxiliary stiffnesses from the joint moment level, joint level, and muscle level, respectively. It was found that the trends of the output joint moment of the optimized HMM and the biological moment of the human HJ were basically the same, r² = 0.883 and RMSE = 0.18 Nm/kg, and the average metabolizable energy consumption of the HJ was (243.77 ± 1.59) J. In the range of 35%∼65% of gait cycle (GC), the auxiliary moment showed a significant downward trend with the increase of EET stiffness, when the EET stiffness of the human body was less than 200 Nm/rad, the biological moment of the human HJ gradually decreased with the increase of EET stiffness, and the MDC of the iliopsoas and hamstring muscles gradually decreased; when the EET stiffness was greater than 200 Nm/rad, the increase of the total moment of the extensor muscles significantly increased, the MDC of the gluteus maximus and rectus muscles gradually increased, and the gluteus maximus and hamstring muscle moments and muscle forces gradually increased; the results show that the optimized muscle model based on Hill can reflect the law of human movement and complete the simulation test of HJ movements, which provides a new idea for the analysis of energy migration in the musculoskeletal system of the lower limb.

Effects of foot orthoses on the biomechanics of the lower extremities in adults with and without musculoskeletal disorders during functional tasks: A systematic review

BACKGROUND

Foot orthoses are among the most commonly used external supports to treat musculoskeletal disorders. It remains unclear how they change the biomechanics of the lower extremities during functional tasks. This systematic review aimed to determine the effects of foot orthoses on primary outcomes (i.e., kinematics, kinetics and electromyography of the lower extremities) in adults with and without musculoskeletal disorders during functional tasks.

METHODS

A literature search was conducted for articles published from inception to June 2021 in Medline, CINAHL, SPORTDiscus, Cochrane libraries and PEDro electronic databases. Two investigators independently assessed the titles and abstracts of retrieved articles based on the inclusion criteria. Of the 5578 citations, 24 studies were included in the qualitative synthesis as they reported the effects of foot orthoses on the primary outcomes. Risk of bias of included studies was determined using the modified Downs and Black Quality Index.

FINDINGS

During low impact tasks, foot orthoses decrease ankle inversion and increase midfoot plantar forces and pressure. During higher impact tasks, foot orthoses had little effects on electromyography and kinematics of the lower extremities but decreased ankle inversion moments.

INTERPRETATION

Even though the effects of foot orthoses on the biomechanics of the lower extremities seem task-dependent, foot orthoses mainly affected the biomechanics of the distal segments during most tasks. However, few studies determined their effects on the biomechanics of the foot. It remains unclear to what extent foot orthoses features induce different biomechanical effects and if foot orthoses effects change for different populations.

The immediate effects of foot orthosis geometry on lower limb muscle activity and foot biomechanics

Foot orthoses (FOs) are used to treat clinical conditions by altering the external forces applied to the foot and thereafter the forces of muscles and tendons. However, whether specific geometric design features of FOs affect muscle activation is unknown. The aim of this study was to investigate if medial heel wedging and increased medial arch height have different effects on the electromyography (EMG) amplitude of tibialis posterior, other muscles of the lower limb and the kinematics and kinetics at the rearfoot and ankle. Healthy participants (n = 19) walked in standardised shoes with i) a flat inlay; ii) a standard shape FOs, iii) standard FOs adjusted to incorporate a 6 mm increase in arch height, iv) and standard FOs adjusted to incorporate an 8° medial heel wedging and v) both the 6 mm increase in arch height and 8° increase in medial wedging. EMG was recorded from medial gastrocnemius, peroneus longus, tibialis anterior and in-dwelling tibialis posterior muscles. Motion and ground reaction force data were collected concurrently. Tibialis posterior EMG amplitude reduced in early stance with all FOs (ηp² = 0.23-1.16). Tibialis posterior EMG amplitude and external ankle eversion moment significantly reduced with FOs incorporating medial wedging. The concurrent reduction in external eversion moment and peak TP EMG amplitude in early stance with medial heel wedging demonstrates the potential for this specific FOs geometric feature to alter TP activation. Medial wedged FOs could facilitate tendon healing in tibialis posterior tendon dysfunction by reducing force going through the TP muscle tendon unit.

The immediate effect of foot orthoses on gluteal and lower limb muscle activity during overground walking in healthy young adults

BACKGROUND

Although foot orthoses are often used in the management of lower limb musculoskeletal conditions, their effects on muscle activation is unclear, especially in more proximal segments of the lower limb.

RESEARCH QUESTION

Primary aim: Is there an immediate effect of foot orthoses on gluteal muscle activity during overground walking in healthy young adults? Secondary aim: Is there an immediate effect of foot orthoses on the activity of hamstring, quadriceps and calf muscles?

METHODS

In eighteen healthy young adults, muscle activity was recorded using fine wire electrodes for gluteus minimus (GMin; anterior, posterior) and gluteus medius (GMed; anterior, middle, posterior); and surface electrodes for gluteus maximus (GMax), hamstring, quadriceps and calf muscles. Participants completed six walking trials for two conditions; shoe and shoe with prefabricated foot orthoses. Muscle activity was normalised to the peak activity of the shoe condition and analysed using one-dimensional statistical non-parametric mapping to identify differences across the gait cycle.

RESULTS

Activity of GMed (anterior, middle, posterior) and GMin (posterior) was reduced in early stance phase when the orthosis was worn in the shoe (p < 0.05). GMin (anterior) activity was significantly reduced during swing (p < 0.05). Muscle activity was also significantly reduced during the orthoses condition for the lateral hamstrings and calf muscles (p < 0.05).

SIGNIFICANCE

Using foot orthoses may provide a strategy to reduce demand on GMin, GMed, lateral hamstring and calf muscles while walking.