Comparative study of Cu-Zn coatings electrodeposited from sulphate and chloride baths

Pulsed electroplating of ZrO2-reinforced Ni-Cr alloy coatings from the duplex complexing agents-containing bath for engineering applications: Importance of operating conditions

The progress in tribocorrosion performance of the engineering parts is in dire need of improving their surface properties. In the present contribution, Ni-Cr-ZrO2 layers were electrodeposited on St37 steel. The stress was put on optimizing the process factors, including the parameters involved in pulsed current electrodeposition and level of the ZrO2 reinforcing nanoparticles (0-20 g/L) in the bath. The surface characteristics of the electrodeposits were evaluated using FESEM, EDS, AFM, and XRD. The tribomechanical characteristics of the films were determined using a Vickers microhardness tester and pin-on-disk apparatus. The electrochemical behavior of the samples was studied using OCP, EIS, PDP, and immersion techniques. The results demonstrated that the included ZrO2 nanoparticles led to more homogenous, rougher, and defect-free surfaces, while they did not change the phase composition of the alloy electrodeposits. The polarization resistance of the Ni-Cr alloy coating increases by 6.7 times when 10 g/L of the reinforcing nanoparticles is added to the electrolyte. A decrease of ≈42 % in the mean COF value was obtained by the incorporation of 10 g/L ZrO2 nanoparticles into the plating bath. The coating system developed holds the promise to address both technical requirements and health concerns.

Electrochemical Approaches for the Recovery of Metals from Electronic Waste: A Critical Review

Electronic waste (e-waste) management and recycling are gaining significant attention due to the presence of precious, critical, or strategic metals combined with the associated environmental burden of recovering metals from natural mines. Metal recovery from e-waste is being prioritized in metallurgical extraction owing to the fast depletion of natural mineral ores and the limited geographical availability of critical and/or strategic metals. Following collection, sorting, and physical pre-treatment of e-waste, electrochemical processes-based metal recovery involves leaching metals in an ionic form in a suitable electrolyte. Electrochemical metal recovery from e-waste uses much less solvent (minimal reagent) and shows convenient and precise control, reduced energy consumption, and low environmental impact. This critical review article covers recent progress in such electrochemical metal recovery from e-waste, emphasizing the comparative significance of electrochemical methods over other methods in the context of an industrial perspective.