Zinc oxide from aloe vera extract: two-level factorial screening of biosynthesis parameters

Antibacterial and wound healing potential of biosynthesized zinc oxide nanoparticles against carbapenem-resistant Acinetobacter baumannii: an in vitro and in vivo study

Carbapenem-resistant Acinetobacter baumannii denotes a significant menace to public health, and it mandates an urgent development of new effective medications. Here, we aimed to estimate the efficiency of the zinc oxide nanoparticles (ZnO NP) biosynthesized from Arthrospira maxima (Spirulina) both in vitro and in vivo. Carbapenem-resistant A. baumannii isolates were collected, identified, tested for their antibiotic susceptibility, and then subjected to PCR to detect carbapenemase-producing genes. The most predominant carbapenemase resistance gene was blaKPC. The biosynthesized ZnO NP were characterized using UV, FTIR, XRD, SEM, and TEM. The prepared ZnO NP was then tested against A. baumannii isolates to determine the minimum inhibitory concentration (MIC), which ranged from 250 to 1000 μg/ml. Burn wound was persuaded in twenty rats and inoculated with carbapenem-resistant A. baumannii isolate. Rats were allocated into four groups: a negative control group, a positive control group treated with topical 0.9% saline, a test treatment group that received topical ZnO NP, and a standard treatment group. All groups received treatment for 15 consecutive days and then euthanized. Skin samples were harvested and then subjected to histopathological and immunochemical investigations. ZnO NP revealed a comparable antibacterial activity to colistin as it revealed a lower level of fibrosis, mature surface epithelization with keratinization, and restoration of the normal skin architecture. In addition, it significantly decreased the immunoreactivity of the studied inflammatory markers. Thus, ZnO NP synthesized by A. maxima could be considered a promising, safe, and biocompatible alternative to traditional antibiotics in the therapy of carbapenem-resistant A. baumannii infections.

In vitro and in vivo efficacy of zinc oxide green nanoparticles against multidrug-resistant Salmonella Typhi

Antibiotic resistance is an increasing threat, requiring novel therapeutic solutions. Metal nanoparticles e.g., zinc oxide nanoparticles (ZnO NPs) exhibited the potential against many bacterial pathogens. Strains of Salmonella enterica serovar Typhi resistant to ceftriaxone were reported first from Pakistan in 2016. Since then, S. Typhi is a pathogen of concern globally owing to its rapidly emerging resistance potential against many last resort antibiotics. In the present study, in vitro and in vivo antimicrobial activity of ZnO NPs against multidrug resistant (MDR) and extensively drug resistant (XDR) Salmonella Typhi strains from Pakistan was evaluated. Zinc oxide green nanoparticles (ZnO GNPs), synthesized from Aloe vera, were characterized by SEM, XRD, UV-vis and Raman spectroscopy. In vitro antibacterial activity of two different concentrations of ZnO GNPs (7 and 15%) was checked using agar well diffusion method. Further, broth microdilution and time kill assays were performed using the ZnO GNPs. In vivo assays were conducted in BALB/c mice sepsis models. In all the three methods, agar well diffusion assay broth microdilution and time kill assay, different zinc oxide dihydrate precursor concentrations had shown the antibacterial activity. The minimum inhibitory concentration (MIC) of ZnO GNPs nanoparticles against MDR and XDR S. Typhi strains was found as 16 to 64 µg/ml. In vivo experiment has shown a significant decrease in CFU/ml in the mice treated with ZnO GNPs as compared to the control group. Our findings have revealed that ZnO GNPs have significant antibacterial activity against MDR and XDR S. Typhi, both in vitro and in vivo.

Electrospun Cerium Oxide Nanoparticle/Aloe Vera Extract-Loaded Nanofibrous Poly(Ethylene Oxide)/Polyurethane Mats As Diabetic Wound Dressings

Currently the prevalence of diabetic wounds brings a huge encumbrance onto patients, causing high disability and mortality rates and a major medical challenge for society. Therefore, in this study, we are targeting to fabricate aloe vera extract infused biocompatible nanofibrous patches to facilitate the process of diabetic wound healing. Additionally, clindamycin has been adsorbed onto the surface of in-house synthesized ceria nanoparticles and again used separately to design a nanofibrous web, as nanoceria can act as a good drug delivery vehicle and exhibit both antimicrobial and antidiabetic properties. Various physicochemical characteristics such as morphology, porosity, and chemical composition of the produced nanofibrous webs were investigated. Bacterial growth inhibition and antibiofilm studies of the nanofibrous materials confirm its antibacterial and antibiofilm efficacy against Gram-positive and Gram-negative bacteria. An in vitro drug release study confirmed that the nanofibrous mat show a sustained drug release pattern (90% of drug in 96 h). The nanofibrous web containing drug loaded nanoceria not only showed superior in vitro performance but also promoted greater wound contraction (95 ± 2%) in diabetes-induced mice in just 7 days. Consequently, it efficaciously lowers the serum glucose level, inflammatory cytokines, oxidative stress, and hepatotoxicity markers as endorsed by various ex vivo tests. Conclusively, this in-house-fabricated biocompatible nanofibrous patch can act as a potential medicated suppository that can be used for treating diabetic wounds in the proximate future.

Revisiting the smart metallic nanomaterials: advances in nanotechnology-based antimicrobials

Despite significant advancements in diagnostics and treatments over the years, the problem of antimicrobial drug resistance remains a pressing issue in public health. The reduced effectiveness of existing antimicrobial drugs has prompted efforts to seek alternative treatments for microbial pathogens or develop new drug candidates. Interestingly, nanomaterials are currently gaining global attention as a possible next-generation antibiotics. Nanotechnology holds significant importance, particularly when addressing infections caused by multi-drug-resistant organisms. Alternatively, these biomaterials can also be combined with antibiotics and other potent biomaterials, providing excellent synergistic effects. Over the past two decades, nanoparticles have gained significant attention among research communities. Despite the complexity of some of their synthesis strategies and chemistry, unrelenting efforts have been recorded in synthesizing potent and highly effective nanomaterials using different approaches. With the ongoing advancements in nanotechnology, integrating it into medical procedures presents novel approaches for improving the standard of patient healthcare. Although the field of nanotechnology offers promises, much remains to be learned to overcome the several inherent issues limiting their full translation to clinics. Here, we comprehensively discussed nanotechnology-based materials, focusing exclusively on metallic nanomaterials and highlighting the advances in their synthesis, chemistry, and mechanisms of action against bacterial pathogens. Importantly, we delve into the current challenges and prospects associated with the technology.

Green inspired synthesis of zinc oxide nanoparticles using Silybum marianum (milk thistle) extract and evaluation of their potential pesticidal and phytopathogens activities

Background

The green approaches for the synthesis of nanoparticles are gaining significant importance because of their high productivity, purity, low cost, biocompatibility, and environmental friendliness.

Methods

The aim of the current study is the green synthesis of zinc oxide nanoparticles (ZnO-NPs) using seed extracts of Silybum marianum, which acts as a reducing and stabilizing agent. central composite design (CCD) of response surface methodology (RSM) optimized synthesis parameters (temperature, pH, reaction time, plant extract, and salt concentration) for controlled size, stability, and maximum yields of ZnO-NPs. Green synthesized ZnO-NPs was characterized using UV-visible spectroscopy and Zetasizer analyses.

Results

The Zetasizer confirmed that green synthesized ZnO-NPs were 51.80 nm in size and monodispersed in nature. The UV-visible results revealed a large band gap energy in the visible region at 360.5 nm wavelength. The bioactivities of green synthesized ZnO-NPs, including antifungal, antibacterial, and pesticidal, were also evaluated. Data analysis confirmed that these activities were concentration dependent. Bio-synthesized ZnO-NPs showed higher mortality towards Tribolium castaneum of about 78 ± 0.57% after 72 h observation as compared to Sitophilus oryzae, which only displayed 74 ± 0.57% at the same concentration and time intervals. Plant-mediated ZnO-NPs also showed high potential against pathogenic gram-positive bacteria (Clavibacter michiganensis), gram-negative bacteria (Pseudomonas syringae), and two fungal strains such as Fusarium oxysporum, and Aspergillums niger with inhibition zones of 18 ± 0.4, 25 ± 0.4, 21 ± 0.57, and 19 ± 0.4 mm, respectively.

Conclusion

The results of this study showed that Silybum marianum-based ZnO-NPs are cost-effective and efficient against crop pests.

Antibacterial and antibiofilm efficacy of green synthesized ZnO nanoparticles using Saraca asoca leaves

Biofilms are made up of bacterial colonies and their extracellular polymeric substances (EPS) matrix, which protects the bacteria from adverse environmental conditions. The increasing drug resistivity of pathogenic bacteria is becoming an emergency for developing new antibacterial agents. In this study, we have synthesized the zinc oxide nanoparticles (ZnO NPs) using the leaf extract of Saraca asoca plant, and the antibacterial and antibiofilm activity of green synthesized ZnO NPs was measured against the biofilm-producing bacteria Bacillus subtilis. The disk diffusion data reveals that the zone of inhibition (ZOI) starts at a concentration of 0.5 mg/mL and minimum inhibition concentration (100 µg/mL) and minimum bactericidal concentration (150 µg/mL) values were also evaluated for green synthesized ZnO nanomaterials. Crystal violet test and microscopic examination were used to assess the impact of produced nanoparticles on biofilm development. The findings indicated a nearly 45%, 64%, and 83% suppression of biofilm development at 0.5 × MIC, 0.75 × MIC, and 1 × MIC value, respectively. The biofilm biomass of the preformed or matured biofilms by the ZnO NPs was evaluated to be 68%, 50%, and 33% at concentrations of 0.5 × MIC, 0.75 × MIC, and 1 × MIC which was concentration-dependent. Moreover, flow cytometry results suggest damage to the bacterial cell membrane. The data indicated that the proportion of dead cells increased with NP concentration in comparison to the control. Therefore, it can be concluded that the green synthetic ZnO nanoparticles showed excellent antibacterial and antibiofilm activity against the Bacillus subtilis bacteria that produce biofilms and that they could be a promising substitute agent for the treatment of biofilms and drug-resistant bacteria.

Chitosan-based composite films containing eugenol nanoemulsion, ZnO nanoparticles and Aloe vera gel for active food packaging

Biopolymer-based food packaging films are gaining increasing popularity, as consumers' demands for sustainable alternatives and environmental concerns associated with synthetic plastic packaging grow. In this research work, chitosan-based active antimicrobial films reinforced with eugenol nanoemulsion (EuNE), Aloe vera gel, and zinc oxide nanoparticles (ZnONPs) were fabricated and characterized for their solubility, microstructure, optical properties, antimicrobial and antioxidant activities. The rate of release of EuNE from the fabricated films was also evaluated to determine active nature of the films. The EuNE droplet size was about 200 nm, and they were uniformly distributed throughout the film matrices. Incorporation of EuNE in chitosan drastically improved UV-light barrier property of the fabricated composite film by 3 to 6 folds, while maintaining their transparency. The XRD spectra of the fabricated films showed good compatibility between the chitosan and the incorporated active agents. The incorporation of ZnONPs significantly improved their antibacterial properties against foodborne bacteria and tensile strength about 2-folds, whereas incorporation of EuNE and AVG improved DPPH scavenging activities of the chitosan film up to 95 %, respectively.

Biogenic Synthesis of ZnO Nanoparticles and Their Application as Bioactive Agents: A Critical Overview

Zinc oxide is a safe material for humans, with high biocompatibility and negligible cytotoxicity. Interestingly, it shows exceptional antimicrobial activity against bacteria, viruses, fungi, etc., especially when reduced to the nanometer size. As it is easily understandable, thanks to its properties, it is at the forefront of safe antimicrobials in this pandemic era. Besides, in the view of the 2022 European Green Deal announced by the European Commission, even science and nanotechnology are moving towards “greener” approaches to the synthesis of nanoparticles. Among them, biogenic ZnO nanoparticles have been extensively studied for their biological applications and environmental remediation. Plants, algae, fungi, yeast, etc., (which are composed of naturally occurring biomolecules) play, in biogenic processes, an active role in the formation of nanoparticles with distinct shapes and sizes. The present review targets the biogenic synthesis of ZnO nanoparticles, with a specific focus on their bioactive properties and antimicrobial application.

A Comprehensive Study on the Synthesis and Characterization of TiO2 Nanoparticles Using Aloe vera Plant Extract and Their Photocatalytic Activity against MB Dye

This paper investigates the use of A. vera extract as a natural capping agent for TiO2 nanoparticles as well as a reducing agent for TiO2 nanoparticles. XRD, ultraviolet diffuse reflectance (UV-DRS), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy-dispersive X-ray analysis (EDXA) were used to characterize the material. In their X-ray diffraction patterns, the titanium dioxide nanoparticles were found to have a high degree of crystallinity, indicating that they were synthesized. Infrared (FT-IR) spectra were used to determine the chemical composition of the plant extract. The DRS spectra in the UV-visible range reveal a high absorption peak at 356 nm, which indicates the existence of TiO2 nanoparticles in the sample. Shape of nanoparticles was revealed by SEM and TEM morphological investigations, which revealed their irregular and somewhat spherical nature. Only titanium and oxygen compounds were found in the EDX spectrum, indicating that they were present. This demonstrates that the NPs that were produced are devoid of contaminants. Using the produced nanoparticles as catalyst, we presented a photocatalytic degradation method for the dye methylene blue in this paper. The findings showed that 94 percent of the damage occurred within 120 minutes of being exposed to UV radiation.

Green Synthesis and Characterization of ZnO Nanoparticles Using Pelargonium odoratissimum (L.) Aqueous Leaf Extract and Their Antioxidant, Antibacterial and Anti-inflammatory Activities

Nanoparticles (NPs) exhibit distinct features compared to traditional physico-chemical synthesis and they have many applications in a wide range of fields of life sciences such as surface coating agents, catalysts, food packaging, corrosion protection, environmental remediation, electronics, biomedical and antimicrobial. Green-synthesized metal NPs, mainly from plant sources, have gained a lot of attention due to their intrinsic characteristics like eco-friendliness, rapidity and cost-effectiveness. In this study, zinc oxide (ZnO) NPs have been synthesized employing an aqueous leaf extract of Pelargonium odoratissimum (L.) as a reducing agent; subsequently, the biosynthesized ZnO NPs were characterized by ultraviolet-visible spectroscopy (UV-Vis), dynamic light scattering (DLS), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and energy-dispersive X-ray spectroscopy (EDX), high-resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED). Moreover, aqueous plant leaf extract was subjected to both qualitative and quantitative analysis. Antioxidant activity of ZnO NPs was assessed by DPPH assay, with varying concentrations of ZnO NPs, which revealed scavenging activity with IC₅₀ = 28.11 μg mL⁻¹. Furthermore, the anti-bacterial efficacy of the green synthesized ZnO NPs against four foodborne pathogenic bacterial strains was examined using the disk diffusion assay, and Staphylococcus aureus (ATCC 8095), Pseudomonas aeruginosa (ATCC10662) and Escherichia coli (ATCC 25922) were found to be the most sensitive against biosynthesized ZnO NPs, whereas the least sensitivity was shown by Bacillus cereus (ATCC 13753). The anti-inflammatory effect was also evaluated for both ZnO NPs and the aqueous leaf extract of P. odoratissimum through the human red blood cells (HRBC) membrane stabilization method (MSM) in vitro models which includes hypotonicity-induced hemolysis. A maximum membrane stabilization of ZnO NPs was found to be 95.6% at a dose of 1000 μg mL⁻¹ compared with the standard indomethacin. The results demonstrated that leaf extract of P. odoratissimum is suitable for synthesizing ZnO NPs, with antioxidant, antibacterial as well as superior anti-inflammatory activity by improving the membrane stability of lysosome cells, which have physiological properties similar to erythrocyte membrane cells and have no hemolytic activity. Overall, this study provides biosynthesized ZnO NPs that can be used as a safe alternative to synthetic substances as well as a potential candidate for antioxidants, antibacterial and anti-inflammatory uses in the biomedical and pharmaceutical industries.

Polymeric Microparticles: Synthesis, Characterization and In Vitro Evaluation for Pulmonary Delivery of Rifampicin

Rifampicin, a potent broad-spectrum antibiotic, remains the backbone of anti-tubercular therapy. However, it can cause severe hepatotoxicity when given orally. To overcome the limitations of the current oral therapy, this study designed inhalable spray-dried, rifampicin-loaded microparticles using aloe vera powder as an immune modulator, with varying concentrations of alginate and L-leucine. The microparticles were assessed for their physicochemical properties, in vitro drug release and aerodynamic behavior. The spray-dried powders were 2 to 4 µm in size with a percentage yield of 45 to 65%. The particles were nearly spherical with the tendency of agglomeration as depicted from Carr’s index (37 to 65) and Hausner’s ratios (>1.50). The drug content ranged from 0.24 to 0.39 mg/mg, with an association efficiency of 39.28 to 96.15%. The dissolution data depicts that the in vitro release of rifampicin from microparticles was significantly retarded with a higher L-leucine concentration in comparison to those formulations containing a higher sodium alginate concentration due to its hydrophobic nature. The aerodynamic data depicts that 60 to 70% of the aerosol mass was emitted from an inhaler with MMAD values of 1.44 to 1.60 µm and FPF of 43.22 to 55.70%. The higher FPF values with retarded in vitro release could allow sufficient time for the phagocytosis of synthesized microparticles by alveolar macrophages, thereby leading to the eradication of M. tuberculosis from these cells.

Phyto-mediated photocatalysis: a critical review of in-depth base to reactive radical generation for erythromycin degradation

Erythromycin (ERY), designated as a risk-prioritized macrolide antibiotic on the 2015 European Union watch list, is the third most commonly used antibiotic, most likely due to its ability to inhibit the protein. ERY has revealed record-high aquatic concentrations threatening the entire ecosystem and hence demands priority remedial measures. The inefficiency of various conventional ERY degradation methodologies opened up a gateway to advanced technologies. The conventional approach comprising of a chemically formulated, single photocatalyst has a major drawback of creating multiple environmental stresses. In this context, photocatalysis is grabbing tremendous attention as an efficient and cost-effective antibiotic treatment approach. Several studies have ascertained that ZnO, TiO₂, Fe₃O₄, and rGO nanoparticles possess remarkable pollution minimizing operational capabilities. Additionally, composites are found much more effective in antibiotic removal than single nanoparticles. In this review, an attempt has been made to provide a comprehensive baseline for efficient reactive radical production by a phyto-mediated composite kept under a certain source of irradiation. Considerable efforts have been directed towards the in-depth investigation of rGO-embedded, phyto-mediated ZnO/TiO₂/Fe₃O₄ photocatalyst fabrication for efficient ERY degradation, undergoing green photocatalysis. This detailed review provides photocatalytic nanocomposite individualities along with a hypothetical ERY degradation mechanism. It is assumed that derived information presented here will provoke innovative ideas for water purification incorporating green photocatalysis, initiating the construction of high-performance biogenic hierarchical nanocatalysts.

Effect of magnesium oxide nanoparticles, hydroxyapatite and hydrogel on regeneration of transverse fracture of distal radius

Study's purpose of this study is to conduct synthesis and evaluate the effect of hydroxyapatite (HA) with hydrogel locally magnesium oxide nanoparticles (MgONPS) locally or intraperitoneally (IP) on the healing of the distal third radial fracture. Concentrations of MgONPs 200μg/ml, dissolved in 1 cc distilled water and the solution stirred by a stirrer for 10 min. HA 0.5 mg in 1ml hydrogel and the solution stirring at the vortex for 15 min. These materials were evaluated in vitro to ensure their suitability with the tissues. Seventy-five healthy adult male rabbits, aged about 1.5- 2 years old with average weighting  1.7- 2.3 Kg. B.W were used. Rabbits were divided into three groups randomly (n=25), group A (HA mixed hydrogel applied locally), group B (HA mixed with hydrogel and MgONPs applied locally) and group C (HA mixed hydrogel applied locally and MgONPs IP). Animals were anesthetized by i.m 40 mg/ kg B.W ketamine hydrochloride and 5mg/ kg B.W xylazine. A 5cm incision had made cranio-medially in the skin of the forelimb (right forelimb) and exposure radius and ulna. The macroscopic evaluation revealed that all groups at 2nd week showed bone reaction in different degrees.

A review: zinc oxide nanoparticles - friends or enemies?

Modern nanotechnology allows obtaining zinc oxide nanomaterials with unique properties that let its use in a wide range of commercial applications. Direct contact with these particles as well as their release into the environment is almost inevitable. This review aims to consider whether the toxicity of zinc oxide nanoparticles found in numerous test models is a real threat to humans and plants. Emerging reports indicated both the risks and benefits associated with the use of zinc oxide nanoparticles in a manner dependent on the concentration and a method of synthesis, as well as the tested object. The amounts needed to achieve the antibacterial activity of ZnO-NPs, and the reported amounts of these nanoparticles in consumer products are sufficient to have a negative impact on living organisms. The most sensitive to their action are human cells, and the mechanism of cytotoxicity is mainly associated with the formation of oxidative stress caused by the action of zinc ions. ZnO-NPs in small concentration can have positive affect to plants, but it poses a threat to more sensitive ones.

Both Zn biofortification and nutrient distribution pattern in cherry tomato plants are influenced by the application of ZnO nanofertilizer

A pot experiment was conducted to determine the influence of commercial nanoparticles (ZnO-NPs) at different doses for use as nanofertilizer on nutrient uptake and its distribution in cherry tomato (Solanum lycopersicum L var. cerasiforme) plants in an acidic (soil pH 5.5) and calcareous soil (soil pH 8.5) from the Mediterranean area. We determined crop yield; macro- (N, P, K, Mg, S and Ca) and micro-nutrient (B, Cu, Fe, Mn, Na and Zn) concentrations in the different parts of the crop (root, stem, leaves and tomato fruits) and the extent of nutrient translocation to the aerial part of the plant. The concentrations of macronutrients N, P, K and Mg in tomato fruits grown in both soils can be considered adequate in terms of nutritional requirements. However, the Ca concentration in tomato fruits grown in the calcareous soil did not reach the required concentration to be considered sufficient. This effect was related to the characteristics of this calcareous soil. Although different concentrations of ZnO-NPs did not affect Fe and Na concentrations in tomato fruit, B concentration in tomato fruits increased with the application of ZnO-NPs. In addition, Cu concentration decreased with the application of ZnO-NPs compared to treatments without any Zn application (Nil-ZnO NP) in the calcareous soil. Manganese concentrations decreased with ZnO-NPs application in both soils. The effect of the application of ZnO-NPs depends on soil characteristics. Zinc applied as a nanofertilizer in the form of ZnO-NPs can be used to increase the crop yield and to obtain an adequate Zn biofortification in cherry tomato crop. The Zn concentrations in tomato fruits reached ranges of 4.5–4.8 mg Zn kg⁻¹ in the acidic soil and 2.5–3,5 mg Zn kg⁻¹ in the calcareous soil. Nutrient concentrations in these fruits following biofortification are adequate for human consumption.

UV-irradiated sol-gel spin coated AZO thin films: enhanced optoelectronic properties

Thin films of transparent conductive Al doped ZnO (AZO) thin films were produced via sol-gel spin coating route. Structural, optical, and electrical properties were explored for several dopant concentrations. Formation of crystalline AZO was verified by X-ray Diffraction (XRD) Analysis and structural analysis were carried out later from the XRD data. Highest band gap of 3.67 eV was found for 2 mol % AZO thin films. The average transmittance was found to be 84.19% in the visible spectra for the corresponding thin films. 2 mol% AZO also exhibited a minimum resistivity of 2.05 Ω-cm with a maximum value of figure of merit. Prolonged UV irradiation was applied to 2 mol % AZO thin films prior to annealing. It significantly modified the surface morphology of the film and provided shielding near UVA (315–378 nm) spectrum. This also enhanced the conductivity of the thin film by 3-fold compared to non-UV treated sample and decreased optical band gap significantly.

Antibacterial Potential of Zinc Oxide Nanoparticles Synthesized using Aloe vera (L.) Burm.f.: A Green Approach to Combat Drug Resistance

Microbial infections and antibiotic resistance are some of the prime factors that are ascribed to endanger human health. Several reports have highlighted that drug-resistant pathogens assist in the etiology of various chronic diseases and lead to fatality. The present study deciphered the role of zinc oxide nanoparticles (ZnO NPs) as therapeutics against selected bacterial strains. The plant-based technique was followed to synthesize ZnO NPs. The synthesis was confirmed with different techniques viz. X-ray diffraction, transmission electron microscope (interplanar spacing at 0.126 nm), scanning electron microscope (flower-like structure), and Fourier transform infrared spectroscopy. The antibacterial analysis revealed that ZnO NPs inhibited the growth of all tested strains (Escherichia coli, Staphylococcus aureus, Salmonella typhi, Bacillus subtilis, and Klebsiella pneumoniae) to a greater extent (MIC ranged between 0.013±0.004-0.0625±0 mg/mL) as compared with ZnO compound (Bulk material). In the present study, ZnO NPs were produced in a cost-effective and environmentally sustainable way using a green process and can be used as a remedy for drug-resistant pathogens.

Visible-Light-Responsive Photocatalytic Activity Significantly Enhanced by Active [VZn+VO+] Defects in Self-Assembled ZnO Nanoparticles

Defect influences on the photoactivity of ZnO nanoparticles prepared by a powdered coconut water (ACP) assisted synthesis have been studied. The crystalline phase and morphology of ZnO nanoparticles were effectively controlled by adjusting the calcination temperature (400-700 °C). An induced transition of hybrid Zn₅(CO₃)₂(OH)₆/ZnO nanoparticles to single-phase ZnO nanoparticles was obtained at 480 °C. The morphological analysis revealed a formation of ZnO nanoparticles with semispherical (∼6.5 nm)- and rod-like (∼96 nm) shapes when the calcination temperatures were 400 and 700 °C, respectively. Photoluminescence characterizations revealed several defects types in the samples with V_Zn and V_O⁺ being in the self-assembly of semispherical- and rod-like ZnO nanoparticles. The photocatalytic activity of the ZnO nanoparticles was examined by assessing the degradation of methylene blue in an aqueous solution under low-intensity visible-light irradiation (∼3 W m^-2). The results point toward the self-assembly of semispherical- and rod-like ZnO nanoparticles that had significantly better photocatalytic activity (∼31%) in comparison to that of spherical-agglomerated- or near-spherical-like species within 120 min of irradiation. The possible photocatalytic mechanism is discussed in detail, and the morphology-driven intrinsic [V_Zn+V_O⁺] defects are proposed to be among the active sites of the ZnO nanoparticles enhancing the photocatalytic activity.

Green Synthesis and Biomedical Applications of ZnO Nanoparticles: Role of PEGylated-ZnO Nanoparticles as Doxorubicin Drug Carrier against MDA-MB-231(TNBC) Cells Line

The present study aimed to develop the synthesis of zinc oxide nanoparticles (ZnO-NPs) using the green method, with Aloe barbadensis leaf extract as a stabilizing and capping agent. In vitro antitumor cytotoxic activity, as well as the surface-functionalization of ZnO-NPs and their drug loading capacity against doxorubicin (DOX) and gemcitabine (GEM) drugs, were also studied. Morphological and structural properties of the produced ZnO-NPs were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersion X-ray diffraction (EDX), UV-Vis spectrophotometry, Fourier-transform infrared analysis (FTIR), and X-ray diffraction (XRD). The prepared ZnO-NPs had a hexagonal shape and average particle size of 20–40 nm, with an absorption peak at 325 nm. The weight and atomic percentages of zinc (50.58% and 28.13%) and oxygen (26.71% and 60.71%) were also determined by EDAX (energy dispersive x-ray analysis) compositional analysis. The appearance of the FTIR peak at 3420 m–1 confirmed the synthesis of ZnO-NPs. The drug loading efficiency (LE) and loading capacity (LC) of unstabilized and PEGylated ZnO-NPs were determined by doxorubicin (DOX) and gemcitabine (GEM) drugs. DOX had superior LE 65% (650 mg/g) and higher LC 32% (320 mg/g) than GEM LE 30.5% (30 mg/g) and LC 16.25% (162 mg/g) on ZnO-NPs. Similar observation was observed in the case of PEG-ZnO-NPs, where DOX had enhanced LE 68% (680 mg/g) and LC 35% (350) mg/g in contrast to GEM, which had LE and LC values of 35% (350 mg/g) and 19% (190 mg/g), respectively. Therefore, DOX was chosen to encapsulate nanoparticles, along with the untreated nanoparticles, to check their in vitro antiproliferative potential against the triple-negative breast cancer (TNBC) cell line (MDA-MB-231) through the MTT (3-(4,5-Dimethylthiazol-2-Yl)-2,5-Diphenyltetrazolium Bromide) assay. This drug delivery strategy implies that the PEGylated biogenically synthesized ZnO-NPs occupy an important position in chemotherapeutic drug loading efficiency and can improve the therapeutic techniques of triple breast cancer.

Larvicidal and antibacterial activity of aqueous leaf extract of Peepal (Ficus religiosa) synthesized nanoparticles

In this study, the zinc oxide nanoparticles (ZnO NPs) and titanium dioxide nanoparticles (TiO2 NPs) were synthesized using the aqueous leaf extract of Ficus religiosa (Peepal tree). The synthesized nanoparticles were tested as larvicides against the larvae of Anopheles stephensi. Further, the synthesized nanoparticles were tested as antibacterial agents against the Escherichia coli (gram negative) and Staphylococcus aureus (gram positive) bacteria. The synthesized nanoparticles were characterized with UV-visible spectroscopy, X-rays powder diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX). The larvicidal mortality was observed after 24 h and 48 h by probit analysis. The antibacterial activity was evaluated using the well diffusion method. The synthesized nanoparticles were irregular shape and varied size. The larvae of An. stephensi were found highly susceptible against the ZnO NPs than the TiO2 NPs and aqueous leaves extract. The highest mortality was observed in synthesized ZnO NPs against first to third instars of (LC50 50, 75, and 5 ppm) and 100% mortality in fourth instars of An. stephensi. The higher zone of inhibition was occurred against the E. coli. This report of present investigation revealed that the rapid biological synthesis of ZnO NPs and TiO2 NPs using aqueous leaf extract of F. religiosa would be effective potential larvicides for mosquito control as well as antimicrobial agents with eco-friendly approach.

Synthesis of Zinc Oxide Nanoparticles Using Leaf Extract of Lippia adoensis (Koseret) and Evaluation of Its Antibacterial Activity

The synthesis of metal oxide nanoparticles with the use of medicinal plant extract is a promising alternative to the conventional chemical method. This work aimed to synthesize zinc oxide nanoparticles using a green approach from indigenous “Koseret” Lippia adoensis leaf extract which is an endemic medicinal plant and cultivated in home gardens of different regions of Ethiopia. The biosynthesized zinc oxide nanoparticles were characterized using thermogravimetric analysis, X-ray diffraction, scanning electron microscopy-energy dispersive spectroscopy, transmission electron microscopy, ultraviolet-visible spectroscopy, and Fourier transform infrared spectroscopy. Furthermore, this study also evaluated the antibacterial activity of the synthesized ZnO nanoparticles against clinical and standard strains of Escherichia coli, Klebsiella pneumonia, Staphylococcus aureus, and Enterococcus faecalis by the disc diffusion method. According to the result of this study, ZnO nanoparticles synthesized using Lippia adoensis leaf extract showed promising result against both Gram-positive and Gram-negative bacterial strains with a maximum inhibition zone of 14 mm and 12 mm, respectively, using uncalcinated form of the synthesized ZnO nanoparticles.

The use of nanoparticles as alternative therapeutic agents against Candida infections: an up-to-date overview and future perspectives

Candida spp. are opportunistic fungi that can cause severe infections especially in immunocompromised patients. Candidiasis is currently the most frequent fungal disease affecting humans globally. This rise is attributed to the vast increase in resistance to antifungal agents. In recent years, the epidemiological and clinical relevance of fungal infections caused by Candida species have attracted a lot of interest with increasing reports of intrinsic and acquired resistance among Candida species. Thus, the formulation of novel, and efficient therapy for Candida infection persists as a critical challenge in modern medicine. The use of nanoparticle as a potential biomaterial to achieve this feat has gained global attention. Nanoparticles have shown promising antifungal activity, and thus, could be seen as the next generation antifungal agents. This review concisely discussed Candida infection with emphasis on anti-candida resistance mechanisms and the use of nanoparticles as potential therapeutic agents against Candida species. Moreover, the mechanisms of activity of nanoparticles against Candida species, recent findings on the anti-candida potentials of nanoparticles and future perspectives are also presented.