Biomass torrefaction as an emerging technology to aid in energy production

Key fuel characteristics and techno-economic aspects of torrefied rubberwood biomass pellets produced by incorporating various cassava-based binders at varied doses

Improving energy content and hydrophobic nature of woody biomass can be pursued through torrefaction. This gives torrefied biomass with a low bulk density, potentially increasing storage and transport costs. To overcome this issue, densifying the torrefied biomass is necessary. However, poor binding of particles makes densification challenging without using a binder. Therefore, the aim of this study was to investigate the physicochemical characteristics and techno-economic aspects of torrefied rubberwood biomass (TRWB) when pelletized using various cassava-based binders at different blending ratios. The selected binders included cassava starch (CS), cassava pulp (CP), and cassava chip (CC). Each binder at 5%, 10%, or 15% (wt.) was mixed with TRWB and water before pelletizing using a flat die machine. The results revealed that pelletizing TRWB with different cassava-based binders at various blending ratios influenced the physicochemical characteristics of the TRWB pellets, particularly dimensions, bulk density, fuel and atomic ratios, and energy content. The TRWB pellets demonstrated energy densities in the range of 7.95-11.39 GJ/m3, and their mechanical durability and fine content fell within acceptable ranges. The TRWB pellets maintained their shape during 120 min of water soaking, with water absorption levels varying by binder dose. The pelletizing ability, material, and energy costs of TRWB pellets depend on binder type and dose. CP can be applied as a binder for pelletizing torrefied rubberwood biomass. However, the mechanical durability of the product needs to be above the user requirement or standard.

Turning trash into treasure: Torrefaction of mixed waste for improved fuel properties. A case study of metropolitan city

Solid waste management is one of the biggest challenges of the current era. The combustible fractions in the waste stream turn out to be a good energy source if converted into refuse-derived fuel. Researchers worldwide are successfully converting it into fuel. However, certain challenges are associated with its application in gasifiers, boilers, etc. to co-fire it with coal. These include high moisture content, low calorific value, and difficulty to transport and store. The present study proposed torrefaction as a pretreatment of the waste by heating it in the range of 200 °C-300 °C in the absence of oxygen at atmospheric pressure. The combustible fraction from the waste stream consisting of wood, textile, paper, carton, and plastics termed as mixed waste was collected and torrefied at 225 °C, 250 °C, 275 °C, and 300 °C for 15 and 30 min each. It was observed that the mass yield and energy yield decreased to 45% and 62.96% respectively, but the energy yield tended to increase by the ratio of 1.39. Proximate analysis showed that the moisture content and volatile matter decreased for torrefied samples, whereas the ash content and fixed carbon content increased. Similarly, the elemental analysis revealed that the carbon content increased around 23% compared to raw samples with torrefaction contrary to hydrogen and oxygen, which decreased. Moreover, the higher heating value (HHV) of the torrefied samples increased around 1.3 times as compared to the raw sample. This pretreatment can serve as an effective solution to the current challenges and enhance refuse-derived fuel's fuel properties.

Unlocking the potential of biochar in the remediation of soils contaminated with heavy metals for sustainable agriculture

Agricultural soils contaminated with heavy metals (HMs) impose a threat to the environmental and to human health. Amendment with biochar could be an eco-friendly and cost-effective option to decrease HMs in contaminated soil. This paper reviews the application of biochar as a soil amendment to immobilise HMs in contaminated soil. We discuss the technologies of its preparation, their specific properties, and effect on the bioavailability of HMs. Biochar stabilises HMs in contaminated soil, enhance the overall quality of the contaminated soil, and significantly reduce HM uptake by plants, making it an option in soil remediation for HM contamination. Biochar enhances the physical (e.g. bulk density, soil structure, water holding capacity), chemical (e.g. cation exchange capacity, pH, nutrient availability, ion exchange, complexes), and biological properties (e.g. microbial abundance, enzymatic activities) of contaminated soil. Biochar also enhances soil fertility, improves plant growth, and reduces the plant availability of HMs. Various field studies have shown that biochar application reduces the bioavailability of HMs from contaminated soil while increasing crop yield. The review highlights the positive effects of biochar by reducing HM bioavailability in contaminated soils. Future work is recommended to ensure that biochars offer a safe and sustainable solution to remediate soils contaminated with HMs.

Non-fuel applications of bio-oil for sustainability in management of bioresources

Biomass valorization by thermochemical conversion method is a promising and intriguing pathway due to the flexibility of utilizing a diverse group of biomass and biowastes, specific product delivery mechanism through manipulation of process parameters, and wide applicability of the products. Pyrolysis has been viewed as an effective valorization technique to transform biowastes into pyrolytic oil, solid char, and syngas. Syngas is generally fed to the pyrolysis process to generate heat necessary for the pyrolysis process to sustain. Pyrolysis may also be a subsidiary component in a biorefinery system where it draws feedstocks from refinery process residues or the side streams of the refinery operation. In recent times, pyrolysis products have been under intense research for their usability and diverse applicability. Bio-oil's rich chemical makeup has promising potential to be used as an advanced biofuel and is considered as a storehouse of diverse chemical species ranging from green solvents to bioactive chemicals. The current review provides a state of knowledge on non-fuel uses of bio-oil and concludes that the pyrolysis process and products could be a part of the future bioeconomy if designed in a manner that biowastes are transformed into value-added products which replace products of petroleum origin.

Enhancing cation and anion exchange capacity of rice straw biochar by chemical modification for increased plant nutrient retention

Biochar, a potential alternative of infield crop residue burning, can prevent nutrient leaching from soil and augment soil fertility. However, pristine biochar contains low cation (CEC) and anion (AEC) exchange capacity. This study developed fourteen engineered biochar by treating a rice straw biochar (RBC-W) first separately with different CEC and AEC enhancing chemicals, and then with their combined treatments to increase CEC and AEC in the novel biochar composites. Following a screening experiment, promising engineered biochar, namely RBC-W treated with O₃-HCl-FeCl₃ (RBC-O-Cl), H₂SO₄-HNO₃-HCl-FeCl₃ (RBC-A-Cl), and NaOH-Fe(NO₃)₃(RBC-OH-Fe), underwent physicochemical characterization and soil leaching-cum nutrient retention studies. RBC-O-Cl, RBC-A-Cl, and RBC-OH-Fe recorded a spectacular rise in CEC and AEC over RBC-W. All the engineered biochar remarkably reduced the leaching of NH₄⁺-N, NO₃^- -N, PO₄^3--P and K⁺ from a sandy loam soil and increased retention of these nutrients. RBC-O-Cl at 4.46 g kg^-1 dosage emerged as the most effective soil amendment increasing the retention of above ions by 33.7, 27.8, 15.0, and 5.74 % over a comparable dose of RBC-W. The engineered biochar could thus enhance plants' nutrient use efficiency and reduce the use of costly chemical fertilizers that are harmful to environmental quality.

Biochar as Sustainable Alternative and Green Adsorbent for the Remediation of Noxious Pollutants: A Comprehensive Review

The current water crisis necessitates the development of new materials for wastewater treatment. A variety of nanomaterials are continuously being investigated for their potential as adsorbents for environmental remediation. Researchers intend to develop a low-cost, simple, and sustainable material that can cater to removal of pollutants. Biochar derived from biowaste is a potential candidate for the existing problem of water pollution. The review focuses on the various aspects of biochar, such as its sources, preparation methods, mechanism, applications for wastewater treatment, and its regeneration. Compared with other adsorbents, biochar is considered as an environmentally friendly, sustainable, and cost-effective substitute for waste management, climate protection, soil improvement, wastewater treatment, etc. The special properties of biochar such as porosity, surface area, surface charge, and functional groups can be easily modified by various chemical methods, resulting in improved adsorption properties. Therefore, in view of the increasing environmental pollution and the problems encountered by researchers in treating pollutants, biochar is of great importance. This review also highlights the challenges and prospective areas that can be explored and studied in more detail in the future.

An overview of torrefied bioresource briquettes: quality-influencing parameters, enhancement through torrefaction and applications

In recent years, the need for clean, viable and sustainable source of alternative fuel is on the rampage in the global space due to the challenges posed by human factors including fossil induced emissions, fuel shortage and its ever-rising prices. These challenges are the major reason to utilize alternative source of energy such as lignocellulosic biomass as domestic and industrial feedstock. However, biomass in their raw form is problematic for application, hence, a dire need for torrefaction pre-treatment is required. The torrefaction option could ameliorate biomass limitations such as low heating value, high volatile matter, low bulk density, hygroscopic and combustion behaviour, low energy density and its fibrous nature. The torrefied product in powder form could cause air pollution and make utilization, handling, transportation, and storage challenging, hence, densification into product of higher density briquettes. This paper therefore provides an overview on the performance of torrefied briquettes from agricultural wastes. The review discusses biomass and their constituents, torrefaction pre-treatment, briquetting of torrefied biomass, the parameters influencing the quality, behaviour and applications of torrefied briquettes, and way forward in the briquetting sector in the developing world.

Biorefinery Processing of Waste to Supply Cost-Effective and Sustainable Inputs for Two-Stage Microalgal Cultivation

Overcoming obstacles to commercialization of algal-based processes for biofuels and co-products requires not just piecemeal incremental improvements, but rather a comprehensive and fundamental re-consideration starting with the selected algae and its associated cultivation, harvesting, biomass conversion, and refinement. A novel two-stage process designed to address challenges of mass outdoor microalgal cultivation for biofuels and co-products was previously demonstrated using an oleaginous, haloalkaline-tolerant, and multi-trophic green Chlorella vulgaris. ALP2 from a soda lake. This involved cultivating the microalgae in a fermenter heterotrophically or photobioreactor mixotrophically (first-stage) to rapidly obtain high cell densities and inoculate an open-pond phototrophic culture (second-stage) featuring high levels of NaHCO3, pH, and salinity. An improved two-stage cultivation that instead sustainably used as more cheap and sustainable inputs the organic carbon, nitrogen, and phosphorous from fractionation of waste was here demonstrated in a small-scale biorefinery process. The first cultivation stage consisted of two simultaneous batch flask cultures featuring (1) mixotrophic cell productivity of 7.25 × 107 cells mL−1 day−1 on BG-110 medium supplemented with 1.587 g L−1 urea and an enzymatic hydrolysate of pre-treated (torrefaction + grinding + ozonolysis + soaking ammonia) wheat-straw that corresponded to 10 g L−1 glucose, and (2) mixotrophic cell productivity of 2.25 × 107 cells mL−1 day−1 on BG-110 medium supplemented with 1.587 g L−1 urea and a purified and de-toxified condensate of pre-treated (torrefaction + grinding) wheat straw that corresponded to 0.350 g L−1 of potassium acetate. The second cultivation stage featured 1H NMR-determined phototrophic lipid productivity of 0.045 g triacylglycerides (TAG) L−1 day−1 on BG-110 medium supplemented with 16.8 g L−1 NaHCO3 and fed batch-added 22% (v/v) anaerobically digested food waste effluent at HCl-mediated pH 9.

Superheated Steam Torrefaction of Biomass Residues with Valorisation of Platform Chemicals—Part 1: Ecological Assessment

Within the last decade, research on torrefaction has gained increasing attention due to its ability to improve the physical properties and chemical composition of biomass residues for further energetic utilisation. While most of the research works focused on improving the energy density of the solid fraction to offer an ecological alternative to coal for energy applications, little attention was paid to the valorisation of the condensable gases as platform chemicals and its ecological relevance when compared to conventional production processes. Therefore, the present study focuses on the ecological evaluation of an innovative biorefinery concept that includes superheated steam drying and the torrefaction of biomass residues at ambient pressure, the recovery of volatiles and the valorisation/separation of several valuable platform chemicals. For a reference case and an alternative system design scenario, the ecological footprint was assessed, considering the use of different biomass residues. The results show that the newly developed process can compete with established bio-based and conventional production processes for furfural, 5-HMF and acetic acid in terms of the assessed environmental performance indicators. The requirements for further research on the synthesis of other promising platform chemicals and the necessary economic evaluation of the process were elaborated.

Thermo-Chemical Conversion of Microwave Selectively Pre-Treated Biomass Blends

Possibilities of more efficient use of regional lignocellulosic resources (wood, wheat straw, peat) of different origin for an environmentally friendly energy production using selectively MW pre-treated blends of commercial wood or wheat straw pellets with raw peat pellets are studied. A hypothesis is proposed and tested that selective MW pre-treatment of wood or wheat straw pellets at the frequency 2.45 GHz and blending of MW pre-treated pellets with raw peat pellets can be used to enhance and control the thermo-chemical conversion of biomass blends. To test this hypothesis, a combined experimental study and mathematical modelling of the processes were performed. The thermo-chemical conversion of selectively activated blends was experimentally studied using a batch-size pilot device, which consists of a biomass gasifier and a combustor. To evaluate the effect of selective MW pre-treatment of biomass pellets on the thermo-chemical conversion of pre-treated blends, measurements of the kinetics of weight loss, yield of combustible volatiles, flame temperature, heat output of the device, and composition of emissions were made at different MW pre-treatment regimes of wheat straw and wood pellets and different mass fractions of pre-treated pellets in biomass blends. The developed novel 2D numerical model of thermo-chemical conversion of MW pre-treated straw confirmed that the pre-treatment of wheat straw pellets increases the generated heat and significantly affects the temperature distribution in the flame/bed zones. It was confirmed that MW pre-treatment leads to a faster thermal decomposition of biomass pellets, synergistically activating the non-treated parts of blends. The overall improved yield of combustible volatiles and their complete combustion provide a surplus of heat production by limiting the formation of GHG emissions, which allows promoting MW pre-treated biomass of different origin as efficient regional bioenergy resources for energy production.

Thermochemical conversion of municipal solid waste into energy and hydrogen: a review

The rising global population is inducing a fast increase in the amount of municipal waste and, in turn, issues of rising cost and environmental pollution. Therefore, alternative treatments such as waste-to-energy should be developed in the context of the circular economy. Here, we review the conversion of municipal solid waste into energy using thermochemical methods such as gasification, combustion, pyrolysis and torrefaction. Energy yield depends on operating conditions and feedstock composition. For instance, torrefaction of municipal waste at 200 °C generates a heating value of 33.01 MJ/kg, while the co-pyrolysis of cereals and peanut waste yields a heating value of 31.44 MJ/kg at 540 °C. Gasification at 800 °C shows higher carbon conversion for plastics, of 94.48%, than for waste wood and grass pellets, of 70-75%. Integrating two or more thermochemical treatments is actually gaining high momentum due to higher energy yield. We also review reforming catalysts to enhance dihydrogen production, such as nickel on support materials such as CaTiO₃, SrTiO₃, BaTiO₃, Al₂O₃, TiO₃, MgO, ZrO₂. Techno-economic analysis, sensitivity analysis and life cycle assessment are discussed.

Biochar derived from fruit by-products using pyrolysis process for the elimination of Pb(II) ion: An updated review

Water pollution is one of the most concerning global environmental problems in this century with the severity and complexity of the issue increases every day. One of the major contributors to water pollution is the discharge of harmful heavy metal wastes into the rivers and water bodies. Without proper treatment, the release of these harmful inorganic waste would endanger the environment by contaminating the food chains of living organisms, hence, leading to potential health risks to humans. The adsorption method has become one of the cost-effective alternative treatments to eliminate heavy metal ions. Since the type of adsorbent material is the most vital factor that determines the effectiveness of the adsorption, continuous efforts have been made in search of cheap adsorbents derived from a variety of waste materials. Fruit waste can be transformed into valuable products, such as biochar, as they are composed of many functional groups, including carboxylic groups and lignin, which is effective in metal binding. The main objective of this study was to review the potential of various types of fruit wastes as an alternative adsorbent for Pb(II) removal. Following a brief overview of the properties and effects of Pb(II), this study discussed the equilibrium isotherms and adsorption kinetic by various adsorption models. The possible adsorption mechanisms and regeneration study for Pb(II) removal were also elaborated in detail to provide a clear understanding of biochar produced using the pyrolysis technique. The future prospects of fruit waste as an adsorbent for the removal of Pb(II) was also highlighted.

Char from the co-pyrolysis of Eucalyptus wood and low-density polyethylene for use as high-quality fuel: Influence of process parameters

Providing a valuable application to the under-utilized solid residue of co-pyrolysis of biomass and plastics could substantially improve economic and environmental sustainability of the process, thereby fostering circular economy. This study focuses on the variation of thermal and physiochemical characteristics of solid char, produced from the co-pyrolysis of waste low-density polyethylene (WLDPE) and Eucalyptus wood with varying pyrolysis temperatures from 300 to 550 °C, residence times of 90-150 min, and relative percentage of 33% and 25% (w/w) WLDPE in the feedstock. The highest values of yield (37%), energy density (1.25) and high heat value (31 MJ/Kg) were observed with the char produced at 300 °C. The physical inhibition caused by the overlaying plastic coating on the surface of the char below 450 °C resulted in the same. However, with the increase in temperature, increase in fuel ratio by 78-79% and fixed carbon content by 68-69% were observed. The highest concentrations of fixed carbon (39%), fuel ratio (0.81) along with the lowest O/C and H/C ratios (0.07 and 0.13) were observed with the chars produced above 450 °C depicting their high degree of carbonization. The fuel value indices of all the chars were > 500 GJ/m³ indicating their suitability as high-quality fuels. Significant influences of residence time and feedstock ratio were also observed on properties of the char. The analysis of variance and principal component analysis also depicted significant variations in the properties of the char produced below and above the temperatures of 450 °C due to the inhibitory and synergetic effects. While the chars produced at 300-350 °C could be used for combustion/co-combustion in coal-fired boilers, chars produced above 450 °C can be opted as household fuel due to their low losses of energy, water vapour, and smoke during combustion.

Combustion characteristics of briquette fuels from sorghum panicle-pearl millets using cassava starch binder

The utilization of agricultural wastes is an attractive and viable option to reduce the environmental pollution and reverse the over-exploitation of fossil fuels. Now-a-days, the usage of fossil fuels has increased manifold causing twin serious problems such as depletion of limited source of fossil fuels and increase in environmental pollution with major consequences. In this study, briquettes were produced using sorghum panicles (SP) and pearl millet (PM) with different ratios (100:0, 10:90, 20:80, 30:70, 40:60, 50:50, 60:40, 70:30, 80:20, 90:10 and 0:100) using cassava starch as a binder with a planned compacting pressure level (200 kN) by exploring hydraulic compression method. The proximate parameters such as water content, level of fixed carbon, ash and volatile matter were determined using American Society for Testing and Materials (ASTM) standard procedures. The elemental analyses (SEM/EDAX) which include carbon (C), oxygen (O), potassium (K), calcium (Ca), chlorine (Cl), sulphur (S), phosphorus (P), aluminium (Al), silicon (Si), magnesium (Mg), cobalt (Co), iron (Fe), zinc (Zn) and sodium (K) were determined in all the briquette samples. Weight loss and optimum heating values of the samples were measured by adopting differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) respectively. In addition to that, the density and compressive strength of all the produced briquettes were determined. In comparison with pongamia-tamarind shell, sorghum panicle-pearl millet briquettes have better fuel properties. The pongamia-tamarind shell fuel has nitrogen and hydrogen whereas sorghum panicle-pearl millet has no identities on both nitrogen and hydrogen content. The occurrence of nitrogen absence is due to non-availability of NOx emissions during combustion. By the cause of more fixed carbon composition, there exists lack in hydrogen content. The sorghum panicle-pearl millet briquettes have better calorific value than pongamia-tamarind shells, and they produce better heating values. Hence, the prepared biomass briquettes are potentially good fuels that derived from agro wastes. Likewise, the determined parameters are compared with the other biomass briquettes.

Effect of Torrefaction on Thermal and Kinetic Behavior of Kenaf during Its Pyrolysis and CO2 Gasification

Torrefaction is an appealing pretreatment method for improving the fuel properties of kenaf biomass before its utilization in thermochemical processes. This study evaluated and compared the impact of torrefaction on thermal behavior and kinetics during pyrolysis and gasification. Thermogravimetric analysis experiments were conducted at temperatures of 300-1173 K at several heating rates under N₂ and CO₂ atmospheres. The raw and torrefied kenaf (RK and TK) during CO₂ gasification in the low-temperature region (<900 K) was found to exhibit a tendency that was similar to that of N₂. However, TK during CO₂ gasification resulted in a lower maximum mass loss rate, delayed initiating temperature, and lower devolatilization index due to lower reactivity. In addition, the gasification reaction of CO₂ and char was observed to occur in the high-temperature region (> 900 K), thus improving conversion efficiencies. The activation energy for TK in a CO₂ atmosphere depending on the conversion was calculated using the distributed activation energy method. The activation of RK during CO₂ gasification was higher than that of N₂. However, TK during CO₂ gasification exhibited a lower activation energy compared to that of N₂, indicating its potential as a better feedstock during the CO₂ gasification process and the ability to save energy.

Advances in Biomass Co-Combustion with Fossil Fuels in the European Context: A Review

Co-combustion of biomass-based fuels and fossil fuels in power plant boilers, utility boilers, and process furnaces is a widely acknowledged means of efficient heat and power production, offering higher power production than comparable systems with sole biomass combustion. This, in combination with CO2 and other greenhouse gases abatement and low specific cost of system retrofit to co-combustion, counts among the tangible advantages of co-combustion application. Technical and operational issues regarding the accelerated fouling, slagging, and corrosion risk, as well as optimal combustion air distribution impact on produced greenhouse gases emissions and ash properties, belong to intensely researched topics nowadays in parallel with the combustion aggregates design optimization, the advanced feed pretreatment techniques, and the co-combustion life cycle assessment. This review addresses the said topics in a systematic manner, starting with feed availability, its pretreatment, fuel properties and combustor types, followed by operational issues, greenhouse gases, and other harmful emissions trends, as well as ash properties and utilization. The body of relevant literature sources is table-wise classified according to numerous criteria pertaining to individual paper sections, providing a concise and complex insight into the research methods, analyzed systems, and obtained results. Recent advances achieved in individual studies and the discovered synergies between co-combusted fuels types and their shares in blended fuel are summed up and discussed. Actual research challenges and prospects are briefly touched on as well.

Thermo-Acoustic Catalytic Effect on Oxidizing Woody Torrefaction

The torrefaction (mild pyrolysis) process modifies biomass chemical and physical properties and is applied as a thermochemical route to upgrade solid fuel. In this work, the catalytic effect of thermo-acoustic on oxidizing woody torrefaction is assessed. The combined effect of two acoustic frequencies (1411, 2696 Hz) and three temperatures (230, 250, and 290 °C) was evaluated through weight loss and its deviation curves, calculated torrefaction severity index (TSI), as well as proximate, calorific, and compression strength analysis of Eucalyptus grandis. A new index to account for the catalytic effects on torrefaction (TCEI) was introduced, providing the quantitative analysis of acoustic frequencies influence. A two-step consecutive reaction numerical model allowed the thermo-acoustic experiment evaluation. For instance, the thermogravimetric profiles revealed that the acoustic field has a catalytic effect on wood torrefaction and enhances the biomass oxidation process for severe treatments. The kinetic simulation of the acoustic coupling resulted in faster conversion rates for the solid pseudo-components showing the boosting effect of acoustic frequencies in anticipating hemicellulose decomposition and enhancing second step oxidizing reaction.

The influence of torrefaction on pyrolysed biomass: The relationship of bio-oil composition with the torrefaction severity

In this study, three types of biomass were torrefied at different times (0.5, 1, 1.5 h) and temperature (200, 240, 280, 320 °C), which were further pyrolyzed at 550 °C after torrefaction. CEI (carbon element index), which was established based on the carbon content of the torrefied biomass, was chosen as an indicator for reflecting torrefaction severity. The results showed that there was a curvilinear relationship between CEI and the physicochemical characteristics, energy recovery of torrefied biomass, which obtained an average goodness of fit was higher than 0.93. Moreover, the goodness of fit between CEI and pyrolysis carbon and bio-oil yield was higher than 0.95 and 0.91, respectively. Especially, the bio-oil composition and CEI were fitted by a quadratic function (y = a + bx + cx²). Based on the function, the yield of phenols could be predicted based on the CEI value, which would benefit for the preparation of higher quality bio-oil directionally.

Recent Insights into Lignocellulosic Biomass Pyrolysis: A Critical Review on Pretreatment, Characterization, and Products Upgrading

Pyrolysis process has been considered to be an efficient approach for valorization of lignocellulosic biomass into bio-oil and value-added chemicals. Bio-oil refers to biomass pyrolysis liquid, which contains alkanes, aromatic compounds, phenol derivatives, and small amounts of ketone, ester, ether, amine, and alcohol. Lignocellulosic biomass is a renewable and sustainable energy resource for carbon that is readily available in the environment. This review article provides an outline of the pyrolysis process including pretreatment of biomass, pyrolysis mechanism, and process products upgrading. The pretreatment processes for biomass are reviewed including physical and chemical processes. In addition, the gaps in research and recommendations for improving the pretreatment processes are highlighted. Furthermore, the effect of feedstock characterization, operating parameters, and types of biomass on the performance of the pyrolysis process are explained. Recent progress in the identification of the mechanism of the pyrolysis process is addressed with some recommendations for future work. In addition, the article critically provides insight into process upgrading via several approaches specifically using catalytic upgrading. In spite of the current catalytic achievements of catalytic pyrolysis for providing high-quality bio-oil, the production yield has simultaneously dropped. This article explains the current drawbacks of catalytic approaches while suggesting alternative methodologies that could possibly improve the deoxygenation of bio-oil while maintaining high production yield.