Adsorptive removal of Rhodamine B dye from aqueous solution by using graphene-based nickel nanocomposite

Synthesis of magnetic MFe2O4 (M = Ni, Co, Zn, Fe) supported on porous carbons derived from Bidens pilosa weed and their adsorptive comparison of toxic dyes

Bidens pilosa is classified as an invasive plant and has become a problematic weed to many agricultural crops. This species strongly germinates, grows and reproduces and competing for nutrients with local plants. To lessen the influence of Bidens pilosa, therefore, converting this harmful species into carbon materials as adsorbents in harm-to-wealth and valorization strategies is required. Here, we synthesized a series of magnetic composites based on MFe2O4 (M = Ni, Co, Zn, Fe) supported on porous carbon (MFOAC) derived from Bidens pilosa by a facile hydrothermal method. The Bidens pilosa carbon was initially activated by condensed H3PO4 to increase the surface chemistry. We observed that porous carbon loaded NiFe2O4 (NFOAC) reached the highest surface area (795.7 m2 g-1), followed by CoFe2O4/AC (449.1 m2 g-1), Fe3O4/AC (426.1 m2 g-1), ZnFe2O4/AC (409.5 m2 g-1). Morphological results showed nanoparticles were well-dispersed on the surface of carbon. RhB, MO, and MR dyes were used as adsorbate to test the adsorption by MFOAC. Effect of time (0-360 min), concentration (5-50 mg L-1), dosage (0.05-0.2 g L-1), and pH (3-9) on dyes adsorption onto MFOAC was investigated. It was found that NFOAC obtained the highest maximum adsorption capacity against dyes, RhB (107.96 mg g-1) < MO (148.05 mg g-1) < MR (153.1 mg g-1). Several mechanisms such as H bonding, π-π stacking, cation-π interaction, and electrostatic interaction were suggested. With sufficient stability and capacity, NFOAC can be used as potential adsorbent for real water treatment systems.

Impact of LaZnFe2O4 supported NiWO4@D400-MMT@CMS/MMA nanocomposites as a catalytic system in remediation of dyes from wastewater

Herein, a novel nanocomposite based on lanthanum zinc ferrite and nickel tungstate was created by incorporation between (MMT-jeffamine-400) nanoparticles (NPs), chloromethyl styrene as a binder and polymethyl methacrylate monomer using solution polymerization. The as-designed nanocomposites were employed to confiscate xylenol orange "X.O" as an acidic dye and rhodamine B "RhB" as "an amphoteric dye" from colored wastewater. The impact of several parameters such as solution pH, initial dye concentration, the effect of time, and the effect of temperature was explored. The consequences indicated that the pure organoclay had negligible adsorption while that composed of organoclay with PMMA@CMS-polymer incorporated with LaZnFe2O4@NiWO4 particles detached more than 90% for xylenol orange (XO) and 93% for "rhodamine B" molecules. Electrostatic interactions are the predominant factor in the adsorption of cationic and amphoteric adsorbates, as proven by zeta-potential measurement. Additionally, the adsorbent may be regenerate and utilized up to five times with good adsorption capabilities by adding sodium hydroxide. As a result, the removal can be effectively accomplished using the nanocomposite as an adsorbent. The actual and theoretical adsorption capacity values for both dyes at all doses were closely matched, which supported the adsorption kinetics data that fit the pseudo-first order rate model well. The adsorption data's correlation values (0.995 for XO and 0.98 for RhB) indicated that both dyes' Langmuir adsorption would perform well. Furthermore, the adsorption of XO and RhB dyes on the adsorbent is confirmed to be a viable reaction by the negative values of ΔGo. The enhanced adsorbent material for the removal of amphoteric and anionic dyes from waste water is the synthesized LaZnFe2O4 supported NiWO4@D400-MMT@CMS/MMA nanocomposites, which exhibits a reusability affinity of up to five cycles.

Transition-state defect structure: A new strategy for TiO2-based porous materials to enhance photodegradation of pollutants

The aim of this paper is to investigate the derived structure and properties of Zeolitic Imidazolate Framework-8 (ZIF-8), and the effect of residual structural on the catalytic properties after loading with Titanium Dioxide (TiO2). For this purpose, we ingeniously prepare C-ZIF-8@TiO2 with a transition-state defect structure and apply it for efficiently degrading organic dye wastewater represented by Rhodamine B (Rh-B). Thanks to the transition-state defect structure loaded with TiO2 and ZIF-8 self-derived Carbon (C) and Zinc Oxide (ZnO), the catalytic performance of C-ZIF-8@TiO2 is superior to that of TiO2 and normal TiO2/ZIF-8 composites, and it is effective in degrading a variety of antibiotics and dyes. The related characterization also shows good photovoltaic properties and long-term durability for C-ZIF-8@TiO2. The mechanism on free radical action is elucidated and the possible degradation pathway for Rh-B is speculated. Therefore, C-ZIF-8@TiO2 provides a new strategy for the degradation of organic pollutants in water bodies.

Synthesis and characterization of citric acid-modified chitosan Schiff base with enhanced antibacterial properties for the elimination of Bismarck Brown R and Rhodamine B dyes from wastewater

In this study, a new chitosan Schiff base with surface modification using citric acid was synthesized for efficient removal of pernicious dyes, namely Bismarck Brown R (BBR) and Rhodamine B (RhB), from wastewater. The physicochemical properties of the modified chitosan Schiff base were comprehensively investigated. Adsorption studies demonstrated that BBR adsorption occurred through monolayer formation, while RhB adsorption proceeded via multilayer formation on the heterogeneous surface. The synthesized adsorbent exhibited exceptional dye removal efficiency, with a Langmuir saturation capacity of 348 ± 11.0 mg.g-1 for BBR and 145 ± 18.44 mg.g-1 for RhB. Isotherm data fitting revealed consistency with the Langmuir isotherm model for BBR and the Freundlich isotherm model for RhB. Notably, the modified chitosan Schiff base showcased enhanced antibacterial properties, effectively inhibiting both gram-positive and gram-negative bacteria. The study's findings underscore the potential of this novel chitosan-based Schiff base as an efficient adsorbent for the removal of various dyes from wastewater, emphasizing its versatility and practical applicability in water treatment processes.

Zinc oxide doped on reduced graphene oxide nanosheets activated by solar radiation for degradation of organic pollutants and bacterial inactivation

Metal ion-based nanocomposite materials were recognized to exhibit a wide range of photocatalytic and biological applications. This study aims to synthesize zinc oxide doped reduced graphene oxide (ZnO/RGO) nanocomposite in sufficient quantities through the sol-gel method. The physical characters of the synthesized ZnO/RGO nanocomposite were determined by X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Scanning electron microscope (SEM), Energy-dispersive X-ray (EDS) and Transmission electron microscopy (TEM) techniques. The TEM image results revealed rod-like morphology of the ZnO/RGO nanocomposite. The X-ray photoelectron spectral data revealed the formation of ZnO nanostructures representing the banding energy gap value of 1044.6 and 1021.5 eV positions. Moreover, ZnO/RGO nanocomposites displayed excellent photocatalytic degradation with a degradation efficiency of 98.6%. This research not only demonstrates the photocatalytic efficiency of zinc oxide-doped RGO nanosheets but also illustrates the antibacterial efficacy against two different bacterial pathogens including Gram-positive E. coli and Gram-negative S. aureus. Furthermore, this research highlights an eco-friendly and inexpensive preparation of nanocomposite material for a wide range of environmental applications.

Reduced graphene Oxide/NiO based nano-composites for the efficient removal of alizarin dye, indigo dye and reduction of nitro aromatic compounds

Removal of alizarin red S (ARS) and Indigo dye from aqueous media and reduction of nitro aromatic compounds are successfully done under mild condition by using reduced Graphene Oxide-Nickel Oxide (rGO-NiO) nanocomposite as catalyst. RGO-NiO is well characterized by different analytical techniques. Morphology, structural, and composition studies done by HRTEM, FESEM, EDX, TGA, FTIR, XPS, Raman spectroscopy, and XRD. RGO-NiO nanocomposite has high stability for the removal of ARS, Indigo dye, reduction reaction nitro aromatic compounds.

Encapsulated Co-ZnO nanospheres as degradation tool for organic pollutants: Synthesis, morphology, adsorption and photo luminescent investigations

Zinc oxide (ZnO) nanostructures, both undoped and Co-doped, were synthesized through the solution combustion process. The diffraction patterns from powder XRD revealed that the materials were crystalline. The morphology of the spherically formed nanoparticles was visualized in SEM micrographs. FTIR spectra verified the existence of a defect-associated peak in Co-encapsulated ZnO (Zn_0.98Co_0.02O) NPs. Photoluminescence studies are undertaken. Malachite Green (MG) dye is used as a representative organic pollutant to study the adsorptive degradation of Co-doped ZnO nanomaterial. Moreover, the adsorption properties, including isotherm and kinetics, are investigated by analyzing the degradation of MG dye. Experimental parameters, such as the concentration of the MG dye, dosage and pH, were varied to ascertain favorable conditions for the degradation study. The results indicate that the MG dye is 70% degraded. After Co-doping, near-band edge emission in undoped ZnO changed into intense red defect emission and was directly correlated with changes in PL emission.

Nanocomposite of graphene oxide decorated Al-waste sludge for removal of rhodamine B from water

The contamination of land and water resources is reaching its breaking point due to increased human activities. This research attempts to provide a smart solution based on the concept of waste to treat waste, in which solid waste from the aluminium anodizing industry is upcycled and used with graphene oxide to engineer a composite material to treat dye contaminated water. Here, highly porous upcycled aluminium waste sludge is combined with less than 1% (w/w) of graphene oxide and then thermally treated to partially reduce the graphene oxide within the nano matrix. Partial reduction enhances π-π interaction with dye molecules while preserving the hydrophilicity and porosity of the overall composite. Studies carried out with rhodamine B, a toxic dye with intense colour, show complete and efficient removal of the dye from water, independent of any pH adjustment. Moreover, the adsorbed material shows no leachate of the dye nor heavy metals back into water over a wide range of pH values. This facilitates alternative product developments such as building materials and eliminates secondary waste generation. Therefore, the composite described herein is sustainable in both material development and in its usage for wastewater treatment and solid waste management.

Design of multifunctional C@Fe3O4-MoO3 binary nanocomposite for applications in triphenylmethane textile dye amelioration via ultrasonic adsorption and electrochemical energy storage

In this paper, we present the synthesis of C@Fe₃O₄-MoO₃ binary composite were prepared through the facile hydrothermal process. The ultrasonic aided adsorption efficacy was evaluated by studying triphenylmethane dye's adsorption potential. The ultrasonic aided adsorption capacity towards crystal violet was 993.6 mg/g, which is remarkably higher and best fitted with the Langmuir isotherm model and followed pseudo-second-order kinetics. The electrochemical studies working electrode have been prepared with 80 wt% active material, 10 wt% carbon black, and 10% polyvinylidene difluoride to evaluate energy storage characteristics. The C@Fe₃O₄-MoO₃ demonstrated an excellent specific capacitance of 40.94 F/g with better retention and stability, making it a potential cathode material for next-generation electrochemical energy storage devices.

Recent Advances in the Synthesis, Characterization, and Application of Carbon Nanomaterials for the Removal of Endocrine-Disrupting Chemicals: A Review

The large-scale production and frequent use of endocrine-disrupting chemicals (EDCs) have led to the continuous release and wide distribution of these pollutions in the natural environment. At low levels, EDC exposure may cause metabolic disorders, sexual development, and reproductive disorders in aquatic animals and humans. Adsorption treatment, particularly using nanocomposites, may represent a promising and sustainable method for EDC removal from wastewater. EDCs could be effectively removed from wastewater using various carbon-based nanomaterials, such as carbon nanofiber, carbon nanotubes, graphene, magnetic carbon nanomaterials, carbon membranes, carbon dots, carbon sponges, etc. Important applications of carbon nanocomposites for the removal of different kinds of EDCs and the theory of adsorption are discussed, as well as recent advances in carbon nanocomposite synthesis technology and characterization technology. Furthermore, the factors affecting the use of carbon nanocomposites and comparisons with other adsorbents for EDC removal are reviewed. This review is significant because it helps to promote the development of nanocomposites for the decontamination of wastewater.

Recent advances of carbon-based nanomaterials (CBNMs) for wastewater treatment: Synthesis and application

Carbon-based nanomaterials (CBNMs) have attracted significant alert due to the affluent science underpinning their implementations associated with a novel mixture of high aspect proportions, greater thermal and electrical performance, outstanding optical features, and high exterior area. CBNMs not only bear assurance in a broad range of implementations in medication, nano and microelectronics, and ecological remedies but may also be utilized in practical laboratory determinations. More specifically, CBNMs perform as an outstanding adsorbent in terminating heavy metal ions (HMI) from wastewater. There is presently a deficiency of powerful threat inspection instruments owing to their complex detection and related deficit in the health risk database. Therefore, our present review concentrates on spreading CBNMs to release pollutants from wastewater. The article wraps the effect of these contaminants and photocatalytic strategies towards treating these mixtures in wastewater, along with their restrictions and challenges, convincing resolutions, and possibilities of these approaches.

Adsorption kinetics and isotherms of binary metal ion aqueous solution using untreated venus shell

Among available technologies to remove heavy metals from wastewater, biosorption has gained more attention due to its high removal efficiency, friendly operation, and inexpensive cost. Despite many studies on metal adsorption from single ion solutions, kinetics and isotherms of binary metal ions simultaneously adsorbed onto biosorbents have not been thoroughly investigated to provide insight on involving mechanisms. This study explored the adsorption potential of untreated venus shells (UVS) that can be utilized in economical and environmentally-friendly ways. In this work, UVS of different sizes were prepared without chemical treatment as a biosorbent. Characterization of UVS was accomplished using nitrogen adsorption isotherm, FTIR, and SEM-EDX. Batch adsorption was carried out to study the effect of initial metal ion concentration, adsorbent dosage, and size on removing Cu(II) and Zn(II) from a binary solution of both metal ions using UVS. The experimental values of maximum adsorption capacities of Cu(II) and Zn(II) were 0.446 and 0.465 mg/g, respectively. The adsorption data were analyzed using the pseudo-first order, pseudo-second order, Elovich, and intraparticle diffusion rate equations. The pseudo-second order and the intraparticle diffusion model yielded the best fit to the experimental data for Cu(II) and Zn(II) ions, respectively. The equilibrium isotherm was examined using the Langmuir, Freundlich, Temkin, Dubinin–Radushkevich (D–R), and Elovich models. The Freundlich model best fits the Cu(II) and Zn(II) equilibrium adsorption data. The results indicated that the adsorption of Cu(II) and Zn(II) onto UVS-600 adsorbent could undergo a chemisorption mechanism. Both metal ions in an aqueous solution were competitively adsorbed onto the heterogeneous active sites available on the shell surfaces. Cu(II) and Zn(II) ions in the binary system could result in ionic interference between the adsorbed ions and the active sites.

SnS2 Nanoparticles and Thin Film for Application as an Adsorbent and Photovoltaic Buffer

Energy consumption and environmental pollution are major issues faced by the world. The present study introduces a single solution using SnS₂ for these two major global problems. SnS₂ nanoparticles and thin films were explored as an adsorbent to remove organic toxic materials (Rhodamine B (RhB)) from water and an alternative to the toxic cadmium sulfide (CdS) buffer for thin-film solar cells, respectively. Primary characterization tools such as X-ray photoelectron spectroscopy (XPS), Raman, X-ray diffraction (XRD), and UV-Vis-NIR spectroscopy were used to analyze the SnS₂ nanoparticles and thin films. At a reaction time of 180 min, 0.4 g/L of SnS₂ nanoparticles showed the highest adsorption capacity of 85% for RhB (10 ppm), indicating that SnS₂ is an appropriate adsorbent. The fabricated Cu(In,Ga)Se₂ (CIGS) device with SnS₂ as a buffer showed a conversion efficiency (~5.1%) close to that (~7.5%) of a device fabricated with the conventional CdS buffer, suggesting that SnS₂ has potential as an alternative buffer.

Sustainable approaches for removing Rhodamine B dye using agricultural waste adsorbents: A review

Rhodamine B (RhB) is among the toxic dyes due to the carcinogenic, neurotoxic effects and ability to cause several diseases for humans. The adsorption with agricultural waste adsorbent recorded high performance for the RhB removal. The current review aimed to explore the efficiency of different adsorbents which have been used in the few last years for removing RhB dye from wastewater. The data of adsorption of RhB using agricultural wastes were collected from the Scopus database in the period between 2015 and 2021. The use of agricultural wastes and adsorbents as a replacement for the activated has received high attention among researchers. The RhB removal methods by microbial enzymes and biomass occurred between 76 and 90.1%. In comparison, the adsorption with agricultural wastes such as activated carbon white sugar reached 98% within 12 min. The adsorption process has a wide range of pH (3-10) due to the zwitterionic forms of RhB. Gmelina aborea leaf activated carbon is among the agriculture wastes absorbents that exhibited 1000 mg g^-1 of the adsorption capacity. It appeared that the agricultural wastes adsorbents have a high potential for removing RhB from the wastewater.