Recycling electro-coagulated sludge from textile wastewater treatment plants as an adsorbent for the adsorptions of fluoride in an aqueous solution

Degradation of levofloxacin using electro coagulation residuals-alginate beads as a novel heterogeneous electro-fenton composite

The presence of levofloxacin (LEV) in aqueous solutions can pose health risks to humans, have adverse effects on aquatic organisms and ecosystems, and contribute to the development of antibiotic-resistant bacteria. This study aims to investigate the feasibility of using electrocoagulation residuals (ECRs) as a heterogeneous catalyst in the electro-Fenton process for degrading LEV. By combining electrocoagulation residuals with sodium alginate, ECRs-alginate beads were synthesized as a heterogeneous electro-Fenton composite. The response surface method was employed to investigate the optimization and influence of various operating parameters such as the initial concentration of LEV (10-50 mg/L), voltage (15-35 V), pH (3-9), and catalyst dose (1-9 g/L). The successful incorporation of iron and other metals into the ECRs-alginate beads was confirmed by characterization tests such as EDX and FTIR. By conducting a batch reaction under optimal conditions (initial LEV concentration = 20 mg/L, pH = 4.5, voltage = 30V, and catalyst dose = 7 g/L), a remarkable degradation of 99% for LEV was achieved. Additionally, under these optimal conditions, a high removal efficiency of 92.3% for total organic carbon (TOC) could be attained within 120 min and these findings are remarkable compared to previous studies. The results further indicated that the degradation of levofloxacin (LEV) could be accurately quantified by utilizing the first-order kinetic reaction with a 0.03 min-1 rate constant. The synthesized beads offered notable advantages in terms of being eco-friendly, simple to use, highly efficient, and easily recoverable from the liquid medium after use.

Controlled design of Na-P1 zeolite/ porous carbon composites from coal gasification fine slag for high-performance adsorbent

Low-cost and concentrated industrial wastes have been recognized as a sustainable resource for preparation of new functional materials. Here, a new method was designed for the synthesis of porous composites containing high-purity Na-P1 zeolite and porous carbon from waste coal gasification fine slag (CGFS), which was treated first by acid leaching to controllably remove metal impurities and adjust Si/Al ratio, followed by NaOH fusion and hydrothermal treatment. By leaching with 1.0 mol/L HCl solution, the Si/Al ratio of the raw CGFS increased to 5.7, and the obtained CZ-1.0 consisted of high-purity Na-P1 zeolite with a typical cone-shaped flower cluster shape. The residue carbon in CGFS can be further activated to form porous carbon and graphite carbon layers interposed in the zeolite structure. The specific surface area and pore volume of CZ-1.0 reached 153.91 m²/g and 0.18 cm³/g, respectively. CZ-1.0 exhibited remarkable adsorption performance for methylene blue (MB) with the adsorption capacity reaching 137.5 mg/g for 100 mg/L MB solution. The adsorption process is mainly controlled by the chemisorption mechanism, and the adsorption of MB by CZ-1.0 may include ion exchange, hydrogen bond interaction, π-π bond interaction and van der Waals force. NaCl solution was successfully used as the desorption agent to regenerate the composite material, and the removal rate remained above 92% after five cycles. This work provides an effective strategy to synthesize a practically applicable adsorbent from the waste coal gasification fine slag for the purification of MB wastewater.

Treatment of fluorinated wastewater with chitosan modified activated sludge lysis ash

Preparation of a novel environmentally friendly and cost-effective composite adsorbent for fluoride removal is presented in this work. An activated sludge lysis ash/chitosan (ASLA/C) composite adsorbent was synthesised using an in situ coprecipitation method, and the removal effect of the material was analysed by static adsorption, isothermal adsorption and kinetic adsorption tests. Langmuir model could better describe the adsorption process and the adsorption was in accordance with the kinetic equation of the pseudo-second-order kinetics reaction. The values of adsorption thermodynamic and kinetic parameters were indicated that the adsorption of fluoride ions is a spontaneous, heat-absorbing entropic process, and the reaction was carried out by a combination of mechanisms, such as electrostatic adsorption, ion exchange, surface complexation and hydrogen bonding. The experimental results indicated that ASLA/C can be used as a cheap and readily available alternative efficient adsorbent where the maximum fluorinate absorption was observed with 7.714 mg g^-1, while solving the problem of waste from activated sludge lysis disposal and realizing the environmental benefits of waste.