Intratubular penetration capacity of HiFlow bioceramic sealer used with warm obturation techniques and single cone: A confocal laser scanning microscopic study

Penetration of Calcium Silicate and Epoxy Resin Sealers Into the Lateral Canals

OBJECTIVES

The aim of this research was to compare the penetration ability of calcium silicate-based sealers (iRoot SP and TotalFill BC HiFlow) and an epoxy resin-based sealer (AH Plus) into the lateral canals using the single-cone (SC) or continuous wave compaction (CW) obturation techniques.

METHODS

Ninety single-rooted human teeth received canal instrumentation and diaphanisation before artificial lateral canals were created at 3 different root levels. The specimens were randomly allocated into 6 groups based on the combination of obturation technique and sealer used. Radiographic and photographic measurements evaluated the percentage of sealer penetration. Statistical analysis was performed to compare the penetration ability amongst different types of sealers, obturation methods, and root levels.

RESULTS

Although TotalFill BC HiFlow sealer combined with the CW technique demonstrated greater sealer penetration at the coronal level (P < .05), the overall penetration ability of iRoot SP, TotalFill BC HiFlow, and AH Plus was not significantly different. The deepest sealer penetration was observed at the apical root level.

CONCLUSIONS

All sealers showed similar penetration abilities into the lateral canals using the SC or CW techniques in vitro. Calcium silicate-based sealers have comparable penetration ability into lateral canals compared to epoxy resin-based sealers using SC or CW obturation techniques.

Hydraulic (Single Cone) Versus Thermogenic (Warm Vertical Compaction) Obturation Techniques: A Systematic Review

Root canal treatment (RCT) involves cleaning and shaping of the root canal system before filling the canals with obturating materials, often gutta-percha (GP). The two primary obturation techniques are the thermogenic (warm vertical compaction, WVC) and hydraulic (single cone, SC) techniques. The objective of this study is to compare the clinical results and effectiveness of thermogenic and hydraulic obturation procedures in endodontic therapy to provide clinicians with evidence-based recommendations. Search strategies were conducted on February 01, 2024 and involved the databases Web of Science, PUBMED, Google Scholar, Scopus, Medline, Embase, NCBI, and Cochrane Library. The current systematic review included systematic reviews; meta-analyses; cohort studies; randomized controlled trial (RCT) studies; studies involving the comparison between single cone and warm compaction techniques; studies involving outcomes that include advantages, disadvantages, and complications associated with single cone or warm compaction techniques; and studies published within the last seven years. The selected studies were restricted to those with insufficient data, review articles without authentic references, publications in a language other than English, animal studies, and studies not involving SC or WVC. Out of 2300 studies registered, only 12 studies were included in the review. Both WVC and SC techniques showed satisfactory root canal fillings. However, five studies showed differences in the filling quality, four studies assessed the sealing ability and the dentinal tubule penetration of sealers, one study compared dentinal cracks, one study evaluated the amount of debris excluded apically, and one study compared the post-operative pain while using both techniques. The WVC and SC obturation techniques offer advantages and disadvantages in endodontic treatment. SC obturation is a simple and efficient procedure that is particularly suitable for situations with uncomplicated canal structures. The WVC obturation approach provides superior flexibility and sealing capability, especially in the complex root canal system. When choosing the method of treatment, it is important to take into account the patient's preferences, the clinician's experience, and unique considerations related to the situation. This systematic review highlights the important recommendations to healthcare professionals in selecting the most suitable obturation procedure based on the specific requirements of each clinical scenario. Research involving long-term follow-ups is required to get a better understanding of the outcomes of long-term goals. Clinical relevance: ability to educate clinicians regarding the best obturation technique between thermogenic and hydraulic. It directs the treatment decisions to maximize patient's comfort, minimize post-operative complications, and improve efficacy in endodontic practice.

Comparative Analysis of Interfacial Adaptation and Depth Penetration of Recent HiFlow versus Regular Bioceramic Sealers in Conjunction with BC Gutta-Percha Points Using Two Different Obturation Techniques-A Preliminary Report of an Ex Vivo Study

This study aimed to assess the adaptability and penetration depth capacity of recent bioceramic systems, including regular EndoSequence (BC) versus HiFlow (BCH) sealers in the presence of BC points. A total of 54 single-rooted teeth were instrumented and obturated with either the cold or warm compaction technique (n = 9), using either BC, BCH, or AH Plus (AHP) combined with BC points. The adaptation, film thickness, and gaps/voids were evaluated by scanning electron microscopy. The sealer/dentin interface was evaluated by Raman spectroscopy, and depth penetration was evaluated by a confocal laser scanning microscope. According to the normality test, the data were statistically analyzed by ANOVA or Kruskal-Wallis and Mann-Whitney U tests at p < 0.05. BCH sealer showed the significantly thinnest film with the greatest flow (p > 0.001), with further improvement when subjected to the warm compaction technique. Moreover, it exhibited close adaptation with deep penetration into radicular dentin, forming a tag-like structure. The Raman spectra also indicated close contact with the dentin surface. The use of BC sealer with BC points exhibited homogenous, single-unit obturation, either with a cold or warm technique. Furthermore, the use of the warm compaction technique with BCH sealer achieved a gap-free interface associated with tag-like structures, which exhibit the monoblock phenomenon.

Impact of low-fusion gutta-percha cones used in variations of the continuous wave condensation technique with filling sealers based on bioceramic compounds on the quality of root canal filling

To evaluate the impact on the quality of filling with of low-fusion and conventional gutta-percha cones. Thirty-six maxillary canines were prepared and divided into three groups: I-conventional cone with Downpack at 200 °C at 4 mm from the WL; II-low-fusion cone with Downpack at 100 °C up to 4 mm from the WL; III-low-fusion cone with Downpack at 100 °C up to 7 mm from the WL. Temperature variations were measured in thirds on the external surface of the root. The bond strength was evaluated using the push-out test. The adhesive interface was analyzed by scanning electron microscopy. The bond strength and the temperature variation data were analyzed using analysis of variance and the failure type using the chi-square test. The low-fusion cone group with 7 mm Downpack showed higher bond strength (4.2 ± 2.7) compared with conventional cones (2.8 ± 1.6) and low-fusion cones with 4 mm Downpack (2.9 ± 1.6) (p < 0.05), with occurrence of a higher number of adhesive failures to the filling material and mixed failures. Relative to temperature variation, there was less temperature change in the apical third, in the low-fusion cone with Downpack 7 mm (1.0 ± 1.0) (p < 0.05). The use of low-fusion cones allowed the continuous wave condensation technique to be performed at a lower depth of Downpack at 100 °C at 7 mm, with less heating in the apical third, without compromising the quality of filling. Using gutta-percha cones with low fusion, which permits a lower condensation temperature and reduced Downpack depth, maintains the quality of filling, in order to minimize possible damage to the periapical tissues.

Effectiveness of tricalcium silicate-based cements: Systematic review and meta-analysis

Introduction

Tricalcium silicate-based cements exhibit several beneficial properties for dental health and biocompatibility, which can induce biomineralisation.

Objectives

To assess the sealing ability and intratubular penetration of tricalcium silicate-based sealers using warm and cold obturation techniques.

Materials and Methods

An electronic search was conducted in PubMed, Scopus, and Web of Science databases for endodontically treated teeth with bioceramics and their sealing capacity in root canal obturation published up to February 2023.

Results

Of the 90 articles, 16 met the inclusion criteria, and only 10 were used for the meta-analysis, of which four addressed intratubular penetration, four addressed sealing capacity, and two addressed both variables. In the sealing capacity group, the meta-analysis concluded a standardised mean difference (SMD) of -1.31 in favour of the test group (warm) with a certain nonsignificant trend (p = 0.081); regarding intratubular penetration, the meta-analysis concluded an SMD = 2.34 in favour of the test group (warm) with significantly greater penetration (p = 0.032).

Conclusion

The warm obturation technique introduced significantly greater intratubular penetration than the cold technique, along with a remarkably superior sealing capacity compared to the cold technique, approaching statistical significance.

Influence of bioceramic cones on the quality of root canal filling relative to bond strength and adaptation of the adhesive interface

AIM

To evaluate the bond strength (BS) and analysis of the adhesive interface in root canals filled with bioceramic gutta percha sealers and cones.

MATERIAL AND METHODS

Ninety-six maxillary canines were divided into eight groups according to the endodontic sealer (AH Plus, AH Plus Bioceramic, Bio-C Sealer or Bio-C Sealer Ion+ and gutta percha cones (conventional or bioceramic) tested. They were analyzed using the BS test, failure pattern, analysis of the adhesive interface by scanning electron microscopy and confocal laser scanning microscopy. The BS data were compared between groups using the analysis of variance test with the Turkey post-test. The chi-square test was used to assess the type of failure and the non-parametric Mann-Whitney and Kruse-Wallis tests (P < 0.05).

RESULTS

Analysis of variance showed higher BS values for the groups of bioceramic gutta percha cones in Bio-C Sealer Ion+ (8.38 ± 4.27), AH Plus Bioceramic (6.19 ± 3.28), Bio-C Sealer (5.70 ± 3.18), AH Plus (4.61 ± 2.11) and for conventional gutta percha cones in AH Plus sealers (4.26 ± 2.35), Bio-C Sealer Ion + (3.63 ± 2.29), Bio-C Sealer (2.94 ± 2.32) and AH Plus Bioceramic (1.19 ± 0.89) (P < 0.05). Relative to the type of failure and adaptation of the types of filling material, a higher percentage of mixed failures was observed (gaps between 1 µm-10 µm) for the group with bioceramic gutta percha cones (P < 0.001).

CONCLUSION

The bond between sealers and bioceramic gutta percha cones showed higher bond strength values and greater penetration into the dentin tubules.

CLINICAL RELEVANCE

The filling the root canal system with bioceramic sealers should be associated with bioceramic gutta percha cones.

Effect of continuous chelation on the dentinal tubule penetration of a calcium silicate-based root canal sealer: a confocal laser microscopy study

BACKGROUND

This study aimed to evaluate the effect of various irrigation protocols on the penetration depth of a calcium silicate-based sealer into dentinal tubules using confocal laser scanning microscopy (CLSM).

METHODS

Twenty single-rooted mandibular premolars were endodontically prepared and divided into the following two groups according to the irrigation protocol used (n = 10): Group I: NaOCl + EDTA and Group II: continuous chelation (NaOCl/Dual Rinse). Obturation was performed with the warm vertical compaction technique using TotalFill HiFlow bioceramic sealer mixed with a fluorophore dye. Samples were observed using CLSM at 10× to measure the percentage of sealer penetration and its maximum depth into the dentinal tubules. Data were analysed using one-way ANOVA followed by Tukey's post-hoc test. The significance level was set at p < 0.05 within all tests.

RESULTS

Comparing the overall results of all sections tested, no statistically significant differences existed between the groups regarding the percentage of sealer penetration (p = 0.612) and maximum depth of penetration (p > 0.05).

CONCLUSIONS

With both types of irrigation used, dentinal tubule penetration was higher in the coronal section than in the apical section. Continuous chelation using NaOCl/Dual Rinse HEDP performed better in the coronal segments, while irrigation using NaOCl + EDTA promoted a higher percentage of sealer penetration in the apical segment.