Rhodamine 6G derivative for the selective copper detection and remediation using nanoporous diatomaceous earth-engineered functional receptor

Colorimetric and Fluorimetric Detection of Fe(III) Using a Rhodamine-Imidazole Hydrazone Based Chemosensor: Photophysical Properties, DFT, TGA, and DSC Studies

Rhodamine-imidazole hydrazones (RIH-1 & RIH-2) based chemosensors have been synthesized. These are characterised and evaluated by FT-IR spectroscopy, 1H-NMR, 13C-NMR, LCMS, absorption and fluorescence spectroscopy. These chemosensors exhibit enhanced sensitivity and selectivity in detecting the biologically significant Fe3+ metal ion through both colorimetric and fluorescence changes. The optical properties have been investigated using binary acetonitrile-water (7:3 v/v) semi-aqueous solution. The probe RIH-1 can be deployed as a fluorescent and colorimetric probe for the detection of Fe3+ ion. It shows an absorption band at 559 nm and an intensity band at 579 nm increasing up to 50-fold with the increase in the concentration of Fe3+ with the detection limit as low as 11nM. In the visible light, RIH-1 helps in the detection of Fe3+ ion through the naked eye, while the addition of Fe3+ to the probe RIH-1 results in a colour change from colourless to pink. This is primarily due to the opening of the lactone ring in RIH-1. Notably, RIH-1 probe displays a high quantum yield of 0.51, after binding with Fe3+ ions. Indeed, it has been found that sensor RIH-1 is very effective in sensing Fe3+ ions through both fluorescence based and visual detection methods. Additionally, DFT studies of these chemosensors have been evaluated, TGA and DSC analysis showed good thermal stability.

An innovative Schiff-base colorimetric chemosensor for the selective detection of Cu2+ ions and its applications

A novel Schiff base moiety, (E)-4-(1-hydrazonoethyl)benzene-1,3-diol (2), and 2,4-dihydroxybenzaldehyde were condensed in a 1 : 1 molar ratio to generate 4-((E)-1-(((Z)-2,4dihydroxybenzylidene)hydrazono)ethyl)benzene-1,3-diol (L), which was then characterized using high-resolution mass spectrometry (HRMS), 1H-NMR, 13C NMR, and single-crystal XRD techniques. UV-vis absorbance measurements were used to determine whether the Schiff base could detect the cupric ions more effectively than the other transition metal ions. When Cu2+ ions were involved, a new band was observed at 462 nm. From the Job plot, the binding stoichiometry for the anticipated L : Cu2+ partnership is determined to be 1 : 1. For the purpose of validating structural correlations and absorption data, DFT simulations were performed. Further, docking studies for L indicated high binding affinity for human hemoglobin, providing vital information about the ligand's favorable binding locations inside hemoglobin binding sites and the consequent interactions with HHb. The binding coefficient and limit of detection were found to be 3.02 × 104 M-1 and 42.09 nM, respectively. Reversibility of the complex was seen upon the addition of EDTA to the L-Cu2+ solution, and a colorimetric variation simulating the "INHIBIT" molecular logic gate was seen upon the addition of Cu2+ and EDTA to L. Furthermore, the chemosensor's potential application in the detection of Cu2+ in the solid state by chemosensor L also confirms its usefulness in real-world applications emphasizing its versatility and practical utility.

Microwave-assisted synthesis of silver nanoparticles as a colorimetric sensor for hydrogen peroxide

To consider silver nanoparticles (AgNPs) as a colorimetric sensor for H2O2 we require investigation of the effects of the homogeneity of the nanoparticle size and morphology on the sensor parameters. Uniformly-sized Ag nanoparticles with diameters of ∼18.8 ± 2.8 nm were produced using microwave irradiation (AgNP1) but non-uniform particles with diameters of ∼71.2 ± 19.4 nm (AgNP2) were formed without microwave irradiation. Microwave synthesis produced AgNP1 with superiority in terms of repeatability, selectivity and sensor stability for up to eight months of storage over AgNP2. AgNP1 exhibited higher sensitivity and detection limits in the working range of 0.01-40000 μM as compared to AgNP2. The application of the AgNP sensor to milk samples provided recovery values of 99.09-100.56% for AgNP1 and 98.18-101.90% for AgNP2. Microwave irradiation resulted in strong and uniform PVP-Ag interactions for isotropic growth into small nanoparticles. Size and morphology uniformity determined the characteristics of the AgNP sensor that can be applied for H2O2 detection in a wide range of concentrations and real-time evaluation, with the potential for industrial applications.

Bioinspired Synthesis of Silver Nanoparticles for the Remediation of Toxic Pollutants and Enhanced Antibacterial Activity

This research presents a novel and environmentally friendly approach for the synthesis of multifunctional nanobiocomposites for the efficient removal of toxic heavy metal and dye, as well as the disinfection of wastewater microorganisms. The nanobiocomposites (KAC-CS-AgNPs) were prepared by incorporating photochemically generated silver nanoparticles (AgNPs) within a chitosan (CS)-modified, high-surface-area activated carbon derived from kenaf (KAC), using a unique self-activation method. The even distribution of AgNPs was visible in the scanning electron microscopy images and a Fourier transform infra red study demonstrated major absorption peaks. The experimental results revealed that KA-CS-AgNPs exhibited exceptional adsorption efficiency for copper (Cu²⁺), lead (Pb²⁺), and Congo Red dye (CR), and showed potent antibacterial activity against Staphylococcus aureus and Escherichia coli. The maximum adsorption capacity (mg g^-1) of KAC-CS-AgNPs was 71.5 for Cu²⁺, 72.3 for Pb²⁺, and 75.9 for CR, and the adsorption phenomena followed on the Freundlich and Langmuir isotherm models and the second-order kinetic model (R² > 0.99). KAC-CS-AgNPs also exhibited excellent reusability of up to four consecutive cycles with minor losses in adsorption ability. The thermodynamic parameters indicated that the adsorption process was spontaneous and endothermic in nature. The bacterial inactivation tests demonstrated that KAC-CS-AgNPs had a strong bactericidal effect on both E. coli and S. aureus, with MIC calculated for E. coli and S. aureus as 32 µg mL^-1 and 44 µg mL^-1, respectively. The synthesized bioinspired nanocomposite KAC-CS-AgNPs could be an innovative solution for effective and sustainable wastewater treatment and has great potential for commercial applications.

Ratiometric colorimetric detection of fluoride ions using a schiff base sensor: enhancing selectivity and sensitivity for naked-eye analysis

A Schiff base receptor with an active -NH group was designed and synthesized for the selective and sensitive colorimetric detection of inorganic fluoride (F^-) ions in an aqueous medium. The sensitivity of the receptor for F^- ions was enhanced by the influence of two electron-withdrawing -NO₂ groups at ortho and para positions which result in a vivid color change. The receptor underwent a remarkable color change from light yellow to violet, enabling naked-eye detection of F^- ions without the need for spectroscopic equipment. To ensure the structural integrity of the synthesized receptors, prominent spectroscopic techniques such as ¹H NMR, FTIR, and GCMS analysis were used for characterization. With a limit of detection (LoD) of 0.0996 ppm, a 1 : 2 stoichiometric binding ratio was observed for receptor and F^- ions. The binding mechanism confirmed the deprotonation of the -NH group followed by the formation of -HF₂, resulting in an intramolecular charge transfer (ICT) transition, which correlates with UV-vis and ¹H NMR titration results. In addition, the proposed binding mechanism of F^- ion interaction with the receptor was theoretically validated using DFT and TDDFT calculations. Furthermore, as a real-life implementation of the receptor, quantification of the F^- ions present in a commercially available mouthwash was demonstrated. To assess the sensitivity performance, a paper-based dip sensor and a solid substrate sensor by functionalizing the receptor on diatomaceous earth were demonstrated. Finally, sensors were built into smartphones that could recognize the red, green, and blue percentages (RGB%) where each parameter defines the intensity of the color, which could also be used as a supplement to the colorimetric investigations.