The structural definition of adducts of stoichiometry AgX:dppf (1:1)(n), X=simple anion, dppf=bis(diphenylphosphino)ferrocene

Beyond phosphorus: synthesis, reactivity, coordination behaviour and catalytic properties of 1,1'-bis(diphenylstibino)ferrocene

Compared to their widely studied phosphine counterparts, ferrocene stibines have received only marginal attention thus far. This paper describes the synthesis of 1,1'-bis(diphenylstibino)ferrocene (1*), which is an antimony analogue of the ubiquitous dppf, and our investigations into the reactivity and coordination behaviour of this compound. Thus, distibine 1 was oxidised to stiboranes fc(SbPh₂X₂)₂ (X = Cl, 2*; F, 6*; fc = ferrocene-1,1'-diyl) and to stibine-stiborane Ph₂SbfcSbPh₂F₂ (5*). Compounds 2 and 6 were easily hydrolysed to produce ferrocenophanes fc[SbPh₂XOSbPh₂X] (X = Cl, 3*; F, 7*). Removing the halogen from 3 with silver(I) salts afforded the corresponding ferrocenophanes with O-bound oxyanions, fc[SbPh₂ZOSbPh₂Z] (Z = NO₃, 4a*; ClO₄, 4b*), which were alternatively prepared from 2 and also converted back to 2 by adding a chloride source. Through investigations into the coordination behaviour of distibine 1, the following compounds were isolated and characterised: [(μ-ClO₄)₂{Ag(1-κ²Sb,Sb')}₂] (8*), [Ag(1-κ²Sb,Sb')₂]X (X = ClO₄, 9a; SbF₆, 9b*), [(μ(Sb,Sb')-1){(arene)MCl₂}₂] (10*, 11*) and [(arene)MCl(1-κ²Sb,Sb')][PF₆] (12*, 13*; 10, 12: M/arene = Ru/η⁶-p-cymene, 11, 13; Rh/η⁵-C₅Me₅), [(η⁵-C₅Me₅)RuCl(1-κ²Sb,Sb')] (14), [MCl₂(1-κ²Sb,Sb')] (M = Pd, 15*; Pt, 16*), [Pd(1-κ²Sb,Sb')₂]X₂ (X = BF₄, 17a; SbF₆, 17b*), [Pd(η²-ma)(1-κ²Sb,Sb')] (18*; ma = maleic anhydride), [(μ(Sb,Sb')-1)(AuCl)₂] (19*), and [Au(1-κ²Sb,Sb')₂]X (X = AuCl₂, 20a*; SbF₆, 20b*). Inspection of the structural parameters suggested that complexes featuring 1 exhibit less sterically strained structures than their dppf analogues due to longer M-Sb and Sb-C bonds, which reduce crowding around the ligated metal centre. Cyclic voltammetry and DFT calculations revealed that the primary electrochemical oxidation of 1 is reversible and occurs at the ferrocene unit. Based on preliminary catalytic tests in Suzuki-Miyaura biaryl coupling, Pd-1 complexes exhibited a lower efficiency than their respective Pd-dppf analogues. (An asterisk indicates that the crystal structure has been determined.).

Bulky 1,1'-bisphosphanoferrocenes and their coordination behaviour towards Cu(i)

Two bulky mesityl substituted dppf-analogues Fe(C₅H₄PMes₂)₂ (Mes = 2,4,6-Me₃C₆H₂, 1) and Fe(C₅H₄PMes₂)(C₅H₄PPh₂) (Mes = 2,4,6-Me₃C₆H₂, Ph = C₆H₅, 3) have been prepared and their properties as donor ligands have been explored using heteronuclear NMR spectroscopy and in particular via¹J_P-Se coupling, cyclic voltammetry and DFT calculations. Based on the results obtained, a series of mono- and dinuclear Cu(i) complexes have been prepared with these new diphosphane ligands using Br^-, I^-, and BF₄^- as counter anions. For the very bulky ligand 1 rare and unprecedented double bridging complexation modes have been observed containing two non-planar Cu₂Br₂ units, while for the other dinuclear complexes planar Cu₂Br₂ units have been found. The Cu(i) complexes of 1 and 3 were then used as catalysts for CO₂-fixation reaction with terminal alkynes, and complexes with ligand 3 were found to be more efficient than those with 1. DFT calculations performed on compounds 1, 3 and their Cu(i) complexes were able to verify the trend of these catalytic reactions.

Fifteen Years of Scientific Investigation into Main Groups and Transition Metal Coordination Chemistry with Allan White

The outcomes of the investigations on the structures and reactivity of a massive number of main group and transition metal complexes containing different families of ligands are reviewed. All the data result from the scientific collaboration between the research groups of Claudio Pettinari and Allan White which lasted fifteen years.

Oligophosphine-thiocyanate Copper(I) and Silver(I) Complexes and Their Borane Derivatives Showing Delayed Fluorescence

The series of chelating phosphine ligands, which contain bidentate P² (bis[(2-diphenylphosphino)phenyl] ether, DPEphos; 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene, Xantphos; 1,2-bis(diphenylphosphino)benzene, dppb), tridentate P³ (bis(2-diphenylphosphinophenyl)phenylphosphine), and tetradentate P⁴ (tris(2-diphenylphosphino)phenylphosphine) ligands, was used for the preparation of the corresponding dinuclear [M(μ₂-SCN)P²]₂ (M = Cu, 1, 3, 5; M = Ag, 2, 4, 6) and mononuclear [CuNCS(P³/P⁴)] (7, 9) and [AgSCN(P³/P⁴)] (8, 10) complexes. The reactions of P⁴ with silver salts in a 1:2 molar ratio produce tetranuclear clusters [Ag₂(μ₃-SCN)(t-SCN)(P⁴)]₂ (11) and [Ag₂(μ₃-SCN)(P⁴)]₂²⁺ (12). Complexes 7–11 bearing terminally coordinated SCN ligands were efficiently converted into derivatives 13–17 with the weakly coordinating ^–SCN:B(C₆F₅)₃ isothiocyanatoborate ligand. Compounds 1 and 5–17 exhibit thermally activated delayed fluorescence (TADF) behavior in the solid state. The excited states of thiocyanate species are dominated by the ligand to ligand SCN → π(phosphine) charge transfer transitions mixed with a variable contribution of MLCT. The boronation of SCN groups changes the nature of both the S₁ and T₁ states to (L + M)LCT d,p(M, P) → π(phosphine). The localization of the excited states on the aromatic systems of the phosphine ligands determines a wide range of luminescence energies achieved for the title complexes (λ_em varies from 448 nm for 1 to 630 nm for 10c). The emission of compounds 10 and 15, based on the P⁴ ligand, strongly depends on the solid-state packing (λ_em = 505 and 625 nm for two crystalline forms of 15), which affects structural reorganizations accompanying the formation of electronically excited states.

Copper(I) and silver(I) thiocyanate complexes containing di-, tri-, and tetraphosphine ligands show efficient TADF in the solid state, dominated by the ligand to ligand SCN → π(phosphine) charge transfer, which is changed to d,p(M, P) → π(phosphine) transitions for the isothiocyanatoborate derivatives. The wide variation of the emission color from blue (448 nm) to red-orange (630 nm) is attributed to the nature of the P-donor ligands and the packing effects, influencing structural distortions in the excited state.

Silver(i) complexes with 1'-(diphenylphosphino)-1-cyanoferrocene: the art of improvisation in coordination

1'-(Diphenylphosphino)-1-cyanoferrocene () reacts with silver(i) halides at a 1 : 1 metal-to-ligand ratio to afford the heterocubane complexes [Ag(μ3-X)(-κP)]4, where X = Cl (), Br (), and I (). In addition, the reaction with AgCl with 2 equiv. of leads to chloride-bridged dimer [(μ-Cl)2{Ag(-κP)2}2] () and, presumably, also to [(μ(P,N)-){AgCl(-κP)}]2 (). While similar reactions with AgCN furnished only the insoluble coordination polymer [(-κP)2Ag(NC)Ag(CN)]n (), those with AgSCN afforded the heterocubane [Ag(-κP)(μ-SCN-S,S,N)]4 () and the thiocyanato-bridged disilver(i) complex [Ag(-κP)2(μ-SCN-S,N)]2 (), thereby resembling reactions in the AgCl- system. Attempted reactions with AgF led to ill-defined products, among which [Ag(-κP)2(μ-HF2)]2 () and [(μ-SiF6){Ag(-κP)2}2] () could be identified. The latter compound was prepared also from Ag2[SiF6] and . Reactions between and AgClO4 or Ag[BF4] afforded disilver complexes [(μ(P,N)-)Ag(ClO4-κO)]2 () and [(μ(P,N)-)Ag(BF4-κF)]2 () featuring pseudolinear Ag(i) centers that are weakly coordinated by the counter anions. A similar reaction with Ag[SbF6] followed by crystallization from ethyl acetate produced an analogous complex, albeit with coordinated solvent, [(μ(P,N)-)Ag(AcOEt-κO)]2[SbF6]2 (). Ultimately, a compound devoid of any additional ligands at the Ag(i) centers, [(μ(P,N)-)Ag]2[B(C6H3(CF3)2-3,5)4]2 (), was obtained from the reaction of with silver(i) tetrakis[3,5-bis(trifluoromethyl)phenyl]borate. The reaction of Ag[BF4] with two equivalents of produced unique coordination polymer [Ag(-κP)(μ(P,N)-)]n[BF4]n (), the structure of which contained one of the phosphinoferrocene ligands coordinated as a P,N-chelate and the other forming a bridge to an adjacent Ag(i) center. All of these compounds were structurally characterized by single-crystal X-ray crystallography, revealing that the lengths of the bonds between silver and its anionic ligand(s) typically exceed the sum of the respective covalent radii, which is in line with the results of theoretical calculations at the density-functional theory (DFT) level, suggesting that standard covalent dative bonds are formed between silver and phosphorus (soft acid/soft base interactions) while the interactions between silver and the ligand's nitrile group (if coordinated) or the supporting anion are of predominantly electrostatic nature.

New adducts of silver(I) halides, AgX (X = Cl, Br), with bidentate phosphine ligands: syntheses and molecular structures of [Ag3(μ 3-Cl)2(μ-dppm)3][PF6], [Ag3(μ 3-Br)2(μ-dppm)3][AgBr2], {[Et4N][Ag2 (μ-Br)3(μ-dppe)]} n , [Et4N]2[(AgCl2)2(μ-dppe)], and [(AgCl)2(μ-dppp)2]

Interaction of AgCl with bis(diphenylphosphino)methane (dppm) in THF/MeCN in the presence of K[PF6] or [Et4N]Br afforded typical trinuclear cationic trigonal-bipyramidal complexes [Ag3(μ 3-Cl)2(μ-dppm)3][PF6] (1) or [Ag3(μ 3-Br)2(μ-dppm)3][AgBr2] (2), respectively. Treatment of AgBr with bis(diphenylphosphino)ethane (dppe) in THF/MeCN in the presence of [Et4N]Br gave a polymeric complex {[Et4N][Ag2(μ-Br)3(μ-dppe)]} n (3) with a dinuclear {Ag2(μ-Br)3} core. The reaction of AgCl with dppe or bis(diphenylphosphino)propane (dppp) in THF/MeCN in the presence of [Et4N]Cl resulted in the isolation of a dinuclear anionic complex [Et4N]2[(AgCl2)2(μ-dppe)] (4) with one μ-dppe bridge or a dinuclear neutral complex [(AgCl)2(μ-dppp)2] (5) with two μ-dppp bridges and a 12-membered ring, respectively. The structures of complexes 1–5 with the bidentate phosphine ligands were determined by single-crystal X-ray diffraction.

1,1′-Bis(di-tert-butylphosphino)ferrocene copper(i) complex catalyzed C–H activation and carboxylation of terminal alkynes

Reaction of CuX (X = Br, I) and 1,1′-bis(di-tert-butylphosphino) ferrocene (dtbpf) in 1 : 1, 2 : 1 and 6 : 1 molar ratio in DCM–MeOH (50 : 50 V/V) afforded copper(i) complexes. These complexes were shown to be efficient catalysts in comparison with CuI for the conversion of terminal alkynes into propiolic acids with CO₂ at room temperature.

A new heterometallic multiligand 3D coordination polymer: synthesis and structure of [Pb(OH)]n[Ag(SCN)(CN)]n

A 3D luminescent coordination polymer built by cyanide linkage of the 2D polymers of [Pb(OH)]_n and [Ag(SCN)CN]_n has been synthesized and characterized.

Synthesis, crystal structures and reactivity of copper(I) amidate complexes with aryl halides: insight into copper(I)-catalyzed Goldberg reaction

In this paper, copper(I) amidate complexes (2-3), proposed intermediates in copper-catalyzed Goldberg reaction, have been prepared and characterized by elemental analysis, IR, (1)H NMR and X-ray crystallography. Ancillary ligand bis(diphenylphosphino)ferrocene (dppf) has contributed greatly to the stability of the copper-amidate complexes due to its strong chelating ability and weak intermolecular interactions. Thermal gravimetric analyses are carried out to determine the thermal competency of complexes 2-3 as the intermediates of the high-temperature Goldberg reactions. Reaction of complexes 2 and 3 with aryl halides generates the N-arylation products 5-8, accompanied by the formation of a copper(I) complex Cu(dppf)X (X = I or Br) 4, which has been determined by LC-MS analysis. These results provide new evidence for the mechanism of copper(I)-catalyzed Goldberg reaction.